Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Is more always better? Tribofilm evolution and tribological behavior impacted by the concentration of ZDDP, ionic liquid, and ZDDP-Ionic liquid combination

Anti-wear additives (AWs), like zinc dialkyldithiophosphates (ZDDPs), have been used in lubricants for more than a half-century, and more effective candidate AWs, like oil-soluble ionic liquids (ILs), are emerging. However, there is a lack of fundamental understanding of how the AW concentration impacts the tribochemical activities at the contact interface. This study systematically investigated the friction and wear behavior in correlation to the tribofilm morphology and composition as a function of the concentration of a ZDDP, a phosphonium-alkylphosphate IL, and an IL+ZDDP combination. The ZDDP concentration rising from 0.4 to 6.4 wt% caused a proportionally increased friction coefficient, which was well correlated to a thicker, rougher, and more brittle tribofilm. This was further understood by the decreasing phosphates but increasing sulfur compounds in the ZDDP tribofilm. In contrast, the IL and IL+ZDDP maintained a low and stable friction coefficient at 0.5 wt% or above. There was no sulfur in the IL tribofilm, and the sulfur compounds were maintained at a low level in the tribofilm for IL+ZDDP even at high concentrations. Results suggested minimizing the sulfur content in the tribofilm would be an effective way to control the friction. An interesting V-shape relationship between the AW concentration and the wear loss was observed for both the IL-containing AWs, with an optimum at 2 wt% for the IL alone and 0.46–0.92 wt% for the IL+ZDDP, respectively. A unique heat map was created using the phosphorus binding energy distribution to reveal the phosphate polymerization at different depths of the tribofilms, which provided additional insight for the tribofilm evolution.

36 MATERIALS SCIENCE↗

Analysis of the Frequency and Diversity of 1,3-Dialkylimidazolium Ionic Liquids Appearing in the Literature

The hypothetical assertion that there are potentially millions of ionic liquids (ILs) can be validated using basic knowledge of IL precursors and simple calculations. While it is an interesting thought exercise to ponder the possibilities of ILs, it is important to investigate how many discrete ILs (i.e., unique cation and anion pairings) have actually been synthesized and reported in the literature. A complete analysis of all ILs is a daunting task, especially if the definition of what constitutes an IL is broad. Nonetheless, insight can be gained into the use of ILs over the past ~20 years from a focused analysis of systematically varied 1,3-dialkylimidazolium-based ILs (i.e., [R 1 R 2 im][X], where R 1 and R 2 are n-alkyl chains and X is either a halide or molecular anion). This family of ILs includes many of the most widely used and most thoroughly studied IL substances, including 1-butyl-3-methylimidazolium hexafluorophosphate ([C 4 mim][PF 6 ]) and 1-ethyl-3-methylimidazolium bistriflimide ([C 2 mim][Tf 2 N]). Using data retrieved from SciFinder searches, we analyzed the variety and frequency of 1,3-dialkylimidazolium-based ILs appearing in the literature. Our analysis reveals that there is a relatively large number of simple 1,3-dialkylimidazolium cations which have not yet been synthesized. Our findings indicate that despite the broad possibilities of IL structures available, there are but a handful of ILs that are commonly used and studied. Within the 1248 [R 1 R 2 im][X] ILs studied, there were only 12 cations extensively used, which included [R 1 R 2 im] + (R 1 = C 1 and R 2 = C 1 –C 12 ). Of the 16 anions studied, only 5, including [BF 4 ] – , [Cl] – , [PF 6 ] – , [Tf 2 N] – , and [Br] – , were used significantly. Thus, it appears that although ILs can be used as designer solvents with task-specific properties, there is a small default subset of ILs, which are “go-to” or “one-size-fits-all.” Here, we rationalize the current state of the IL landscape in terms of the historical perceptions (and misconceptions) around ILs, familiarity, availability and cost of starting materials, commercial availability of ILs, and the motivations from which researchers choose to synthesize and characterize new ILs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How Do Ionic Liquids “Fold” Ionenes? Computational and Experimental Analysis of Imidazolium Polymers Based on Ether and Alkyl Chain Variations Dissolved in an Ionic Liquid

Molecular dynamics (MD) simulations and complementary experiments are used here to understand the inter- and intramolecular structure and conformational properties of ionenes (i.e., cationic polymers formed from condensation reactions) dissolved in an ionic liquid (IL), 1-ethyl-3-methylimidazolium bistriflimide [C 2 mim + ][Tf 2 N - ]. The simulated structural properties are benchmarked against experimental analyses of these same polymers, mainly using dynamic light scattering (DLS) experiments. Four different imidazolium ionenes are considered, corresponding to variations in the chemistry and structure of the repeat units including: (1) poly (decylimidazolium) (PD 10 ); (2) poly (tetraethyleneglycolimidazolium) (PE 10 ); (3) alternating copolymer (P(ED) 5 ); and (4) a block copolymer (PE 5 D 5 ). Detailed computational analyses of the polymer structure and conformational properties were performed, including the radius of gyration, end-to-end distance, torsional distributions, and site-site and spatial distribution functions. Overall, there is a competition between intramolecular associations between the imidazolium groups and the ether sites in the polymers versus the intermolecular interactions of the polymer imidazolium groups with the surrounding anion molecules. The polymer with only ether linkages (PE 10 ) results in the most intramolecular interactions, leading to significant coiling behavior and chain contraction. These strong interactions reduce chain flexibility, but they also result in much more linear chain configurations and alignment of the imidazolium groups. The polymer structure is strongly affected as the concentration of alkyl groups is increased, and we find that the polymer architecture (alternating versus block copolymer) also has an important influence. Furthermore, these detailed observations are important for understanding the connection between the molecular design of imidazolium polymers and their emergent structural properties, which could lead to unique opportunities for creating polymer composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequential Capacitive Deposition of Ionic Liquids for Conformal Thin Film Coatings on Oxygen Reduction Reaction Electrocatalysts

Ionic liquid (IL)-modified carbon-supported catalysts have demonstrated significant improvements in oxygen reduction reaction (ORR) activity. However, transition of this result from the half-cell to the proton exchange membrane fuel cell (PEMFC) has been challenging. Presented here is a processing methodology that yields the formation of a thin (<2 nm) conformal IL coating on the surface of both three-dimensional electrocatalysts and bulk single crystals through the sequential capacitive deposition (SCD) of anionic and cationic components and their subsequent condensation into a hydrophobic, protic IL. In conclusion, SCD shows promise for IL incorporation into preformed PEMFC catalyst layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of a haloalkaliphilic and thermostable cellulase with improved ionic liquid tolerance

Some ionic liquids (ILs) have been shown to be very effective solvents for biomass pretreatment. It is known that some ILs can have a strong inhibitory effect on fungal cellulases, making the digestion of cellulose inefficient in the presence of ILs. The identification of IL-tolerant enzymes that could be produced as a cellulase cocktail would reduce the costs and water use requirements of the IL pretreatment process. Due to their adaptation to high salinity environments, halophilic enzymes are hypothesized to be good candidates for screening and identifying IL-resistant cellulases. Using a genome-based approach, we have identified and characterized a halophilic cellulase (Hu-CBH1) from the halophilic archaeon, Halorhabdus utahensis. Hu-CBH1 is present in a gene cluster containing multiple putative cellulolytic enzymes. Sequence and theoretical structure analysis indicate that Hu-CBH1 is highly enriched with negatively charged acidic amino acids on the surface, which may form a solvation shell that may stabilize the enzyme, through interaction with salt ions and/or water molecules. Hu-CBH1 is a heat tolerant haloalkaliphilic cellulase and is active in salt concentrations up to 5 M NaCl. In high salt buffer, Hu-CBH1 can tolerate alkali (pH 11.5) conditions and, more importantly, is tolerant to high levels (20percent w/w) of ILs, including 1-allyl-3-methylimidazolium chloride ([Amim]Cl). Interestingly, the tolerances to heat, alkali and ILs are found to be salt-dependent, suggesting that the enzyme is stabilized by the presence of salt. Our results indicate that halophilic enzymes are good candidates for the screening of IL-tolerant cellulolytic enzymes.

09 BIOMASS FUELS↗

Ionic Liquid-Enhanced Solid State Electrolyte Interface (SEI) for Lithium Sulfur Batteries

Li-S battery is a complicated system with many challenges existing before its final market penetration. While most of the reported work for Li-S batteries is focused on the cathode design, we demonstrate in this work that the anode consumption accelerated by corrosive polysulfide solution also critically determines the Li-S cell performance. To validate this hypothesis, ionic liquid (IL) N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide (Py14TFSI) has been employed to modify the properties of SEI layer formed on Li metal surface in Li-S batteries. It is found that the IL-enhanced passivation film on the lithium anode surface exhibits much different morphology and chemical compositions, effectively protecting lithium metal from continuous attack by soluble polysulfides. Therefore, both cell impedance and the irreversible consumption of polysulfides on lithium metal are reduced. As a result, the Coulombic efficiency and the cycling stability of Li-S batteries have been greatly improved. After 120 cycles, Li-S battery cycled in the electrolyte containing IL demonstrates a high capacity retention of 94.3% at 0.1 C rate. These results unveil another important failure mechanism for Li-S batteries and shin the light on the new approaches to improve Li-S battery performances.

electrolyte↗

Sampling Polymorphs of Ionic Solids using Random Superlattices

Polymorphism offers rich and virtually unexplored space for discovering novel functional materials. To harness this potential approaches capable of both exploring the space of polymorphs and assessing their realizability are needed. Here, one such approach devised for partially ionic solids is presented. The structure prediction part is carried out by performing local density functional theory relaxations on a large set of random supperlattices (RSLs) with atoms distributed randomly over different planes in a way that favors cation-anion coordination. Applying the RSL sampling on MgO, ZnO, and SnO 2 reveals that the resulting probability of occurrence of a given structure offers a measure of its realizability explaining fully the experimentally observed, metastable polymorphs in these three systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring the Use of Ionic Liquid Mixtures to Enhance the Performance of Dicationic Ionic Liquids

Dicationic ionic liquids (DILs) of diverse structural architectures (including symmetrical and asymmetrical ammonium, phosphonium and heterodications and the bis(trifluoromethylsulfonyl)amide (NTf 2 - ) anion) have been prepared and used as additives to N-methyl-N-ethoxyethylpyrrolidinium (P 1 EOE) NTf 2 , a relatively high-performing IL in terms of its transport properties (viscosity 53 mPa s). The three-ion, binary IL mixtures were characterized for their thermal and transport properties using differential scanning calorimetry, temperature dependent viscosity, conductivity and Pulsed Gradient Spin Echo (PGSE) NMR. Variable temperature 1 H, 19 F and 31 P self-diffusion coefficients were determined at 25, 60 and 75°C. The order of the diffusion coefficients was D(P 1 EOE + ) > D(anion) > D(dication), and the composition of the dication had a strong effect on the degree to which diffusion of all three species is more or less coupled. IL mixtures containing about 30 mol % of the dicationic NTf 2 and 70 mol % of P 1 EOE NTf 2 resulted in a significant decrease in glass transition temperatures and viscosities compared to the pure DIL. The mixtures extended the liquid range and potential for practical applications significantly. Finally, the data obtained here provides insight into the future design of dicationic salts tailored to exhibit lower viscosity and higher conductivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Rechargeable Al/S Battery with an Ionic‐Liquid Electrolyte

Abstract Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite‐free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg −1 ) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlS x . Herein, we demonstrate the first reversible Al/S battery in ionic‐liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid‐state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid‐state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system.

Gao, Tao↗

Pressure‐Tuneable Visible‐Range Band Gap in the Ionic Spinel Tin Nitride

Abstract The application of pressure allows systematic tuning of the charge density of a material cleanly, that is, without changes to the chemical composition via dopants, and exploratory high‐pressure experiments can inform the design of bulk syntheses of materials that benefit from their properties under compression. The electronic and structural response of semiconducting tin nitride Sn 3 N 4 under compression is now reported. A continuous opening of the optical band gap was observed from 1.3 eV to 3.0 eV over a range of 100 GPa, a 540 nm blue‐shift spanning the entire visible spectrum. The pressure‐mediated band gap opening is general to this material across numerous high‐density polymorphs, implicating the predominant ionic bonding in the material as the cause. The rate of decompression to ambient conditions permits access to recoverable metastable states with varying band gaps energies, opening the possibility of pressure‐tuneable electronic properties for future applications.

Kearney, John S. C.↗

Efficient CO2 Capture by Porous, Nitrogen-Doped Carbonaceous Adsorbents Derived from Task-Specific Ionic Liquids

The search for a better carbon dioxide (CO2) capture material is attracting significant attention because of an increase in anthropogenic emissions. Porous materials are considered to be among the most promising candidates. A series of porous, nitrogen-doped carbons for CO2 capture have been developed by using high-yield carbonization reactions from task-specific ionic liquid (TSIL) precursors. Owing to strong interactions between the CO2 molecules and nitrogen-containing basic sites within the carbon framework, the porous nitrogen-doped compound derived from the carbonization of a TSIL at 500 degrees C, CN500, exhibits an exceptional CO2 absorption capacity of 193 mg of CO2 per g sorbent (4.39 mmol g(-1) at 0 degrees C and 1 bar), which demonstrates a significantly higher capacity than previously reported adsorbents. The application of TSILs as precursors for porous materials provides a new avenue for the development of improved materials for carbon capture.

Zhu, X↗

Long-Term Experimental Determination of Solubilities of Micro-Crystalline Nd(III) Hydroxide in High Ionic Strength Solutions: Applications to Nuclear Waste Management [A Pitzer Model for Am(III)/Nd(III) hydroxide solubility in NaCl-H 2 O at 298.15 K to high ionic strengths: Experimental validation and model applications]

In this paper, the experimental results from long-term solubility experiments on micro crystalline neodymium hydroxide, Nd(OH) 3 (micro cr), in high ionic strength solutions at 298.15 K under well-constrained conditions are presented. The starting material was synthesized according to a well-established method in the literature. In contrast with the previous studies in which hydrogen ion concentrations in experiments were adjusted with addition of either an acid or a base, the hydrogen ion concentrations in our experiments are controlled by the dissolution of Nd(OH) 3 (micro cr), avoiding the possibility of phase change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of Charged Species in Ionic-Neutral Block Copolymer and Surfactant Complexes [Structural Relaxation and Dynamics of Ionic-Neutral Block Copolymer Surfactant Complexes]

Structure–property relationships of ionic block copolymer (BCP) surfactant complexes are critical toward the progress of favorable engineering design of efficient charge-transport materials. In this paper, molecular dynamics simulations are used to understand the dynamics of charged-neutral BCP and surfactant complexes. The dynamics are examined for two different systems: charged-neutral double-hydrophilic and hydrophobic–hydrophilic block copolymers with oppositely charged surfactant moieties. The dynamics of the surfactant head, tails, and charges are studied for five different BCP volume fractions. We observe that the dynamics of the different species solely depend on the balance between electrostatic and entropic interactions between the charged species and the neutral monomers. The favorable hydrophobic–hydrophobic interactions and the unfavorable hydrophobic–hydrophilic interactions determine the mobilities of the monomers. The dynamical properties of the charge species influence complex formation. Structural relaxations exhibit length-scale dependent behavior, with slower relaxation at the radius of gyration length-scale and faster relaxation at the segmental length-scale, consistent with previous results. The dynamical analysis correlates ion-exchange kinetics to the self-assembly behavior of the complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular-Level Control over Ionic Conduction and Ionic Current Direction by Designing Macrocycle-Based Ionomers

Poor ionic conductivity of the catalyst-binding, submicrometer- thick ionomer layers in energy conversion and storage devices is a huge challenge. However, ionomers are rarely designed keeping in mind the specific issues associated with nanoconfinement. Here, we designed nature-inspired ionomers (calix-2) having hollow, macrocyclic, calix[4]arene-based repeat units with precise, sub-nanometer diameter. In ≤100 nm-thick films, the in-plane proton conductivity of calix-2 was up to 8 times higher than the current benchmark ionomer Nafion at 85% relative humidity (RH), while it was 1-2 orders of magnitude higher than Nafion at 20-25% RH. Confocal laser scanning microscopy and other synthetic techniques allowed us to demonstrate the role of macrocyclic cavities in boosting the proton conductivity. The systematic self-assembly of calix-2 chains into ellipsoids in thin films was evidenced from atomic force microscopy and grazing incidence small-angle X-ray scattering measurements. Moreover, the likelihood of alignment and stacking of macrocyclic units, the presence of one-dimensional water wires across this macrocycle stacks, and thus the formation of long-range proton conduction pathways were suggested by atomistic simulations. We not only did see an unprecedented improvement in thin-film proton conductivity but also saw an improvement in proton conductivity of bulk membranes when calix-2 was added to the Nafion matrices. Nafion-calix-2 composite membranes also took advantage of the asymmetric charge distribution across calix[4]arene repeat units collectively and exhibited voltage-gating behavior. The inclusion of molecular macrocyclic cavities into the ionomer chemical structure can thus emerge as a promising design concept for highly efficient ion-conducting and ion-permselective materials for sustainable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗