Search NASA⌕ Search

SEARCH · Search NASA

Results for “links”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Link Analysis of High Throughput Spacecraft Communication Systems for Future Science Missions

NASA's plan to launch several spacecraft into low Earth Orbit (LEO) to support science missions in the next ten years and beyond requires down link throughput on the order of several terabits per day. The ability to handle such a large volume of data far exceeds the capabilities of current systems. This paper proposes two solutions, first, a high data rate link between the LEO spacecraft and ground via relay satellites in geostationary orbit (GEO). Second, a high data rate direct to ground link from LEO. Next, the paper presents results from computer simulations carried out for both types of links taking into consideration spacecraft transmitter frequency, EIRP, and waveform; elevation angle dependent path loss through Earths atmosphere, and ground station receiver GT.

Antennas↗
NASA NTRS2015

Link Analysis of High Throughput Spacecraft Communication Systems for Future Science Missions

NASA's plan to launch several spacecrafts into low Earth Orbit (LEO) to support science missions in the next ten years and beyond requires down link throughput on the order of several terabits per day. The ability to handle such a large volume of data far exceeds the capabilities of current systems. This paper proposes two solutions, first, a high data rate link between the LEO spacecraft and ground via relay satellites in geostationary orbit (GEO). Second, a high data rate direct to ground link from LEO. Next, the paper presents results from computer simulations carried out for both types of links taking into consideration spacecraft transmitter frequency, EIRP, and waveform; elevation angle dependent path loss through Earths atmosphere, and ground station receiver GT.

Amplifier↗
NASA NTRS2014

User Interaction with the CNPC Link

As part of NASAs UAS in the NAS project, human factor guidelines are being developed for the ground control station of unmanned aircraft systems. A critical task for the pilot of a UAS is the management and control of the terrestrial radio links used to provide control of the vehicle and relay communications with air traffic control. An analysis of the task of the UAS pilot has been conducted to identify areas where guidelines are required. This analysis has identified a set of information requirements that must be supported by the radio equipment used to provide Control and Non-payload Communication (CNPC). Key requirements include the need for an alert when the link is lost, information on the current quality and latency of the link, and information to enable the future quality of the link to be anticipated as the aircraft changes location. These identified requirements can assist in the development of minimum operational performance standards for CNPC equipment.

unmanned aerial systems↗
NASA NTRS2017

Progress on the Development of the UAS C2 Link and Supporting Spectrum - from LOS to BLOS

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the control and non-payload communications (CNPC) link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, based upon standards that enable certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications are required to support UAS operations. The development of standards has been undertaken by RTCA Special Committee 228 (SC-228), with supporting technical data developed by NASA under the UAS in the National Airspace (NAS) Project. As a result of this work minimum operational performance standards (MOPS) have been completed and published for the LOS CNPC system. The second phase of work, for both NASA and RTCA involves the BLOS CNPC systems. The development of technical data to support MOPS development for UAS BLOS satellite-based CNPC links has now been initiated by NASA, and RTCA SC-228 has organized itself to begin the MOPS development process. This paper will provide an overview of the work that has been completed to date by the Communications Subproject in support of LOS C2 communications for UAS followed by an update of plans and progress for the BLOS phase of the project, with the focus on the UAS C2 spectrum aspects.

Pilotless aircraft↗
NASA NTRS2017

Augmenting the SCaN Link Budget Tool with Validated Atmospheric Propagation

In any Earth-Space or Space-Earth communications link, atmospheric effects cause significant signal attenuation. In order to develop a communications system that is cost effective while meeting appropriate performance requirements, it is important to accurately predict these effects for the given link parameters. This project aimed to develop a Matlab(TradeMark) (The MathWorks, Inc.) program that could augment the existing Space Communications and Navigation (SCaN) Link Budget Tool with accurate predictions of atmospheric attenuation of both optical and radio-frequency signals according to the SCaN Optical Link Assessment Model Version 5 and the International Telecommunications Union, Radiocommunications Sector (ITU-R) atmospheric propagation loss model, respectively. When compared to data collected from the Advance Communications Technology Satellite (ACTS), the radio-frequency model predicted attenuation to within 1.3 dB of loss for 95 of measurements. Ultimately, this tool will be integrated into the SCaN Center for Engineering, Networks, Integration, and Communications (SCENIC) user interface in order to support analysis of existing SCaN systems and planning capabilities for future NASA missions.

radio frequency communication↗
NASA NTRS2018

Approaches to Difficult Aerospace Telecommunications Links

With the proliferation of local wireless and 4G cellular networks, it is often presumed that reliable and fast wireless links are commonplace. However, there are still systems that must leverage very constrained, lagged, and lossy communication links. This discussion explores aerospace systems that utilize these problematic links, the challenges of using modern protocols over these links, and how potential solutions can negatively impact the performance of the entire system.

IP↗
NASA NTRS2020

Simultaneous Optical Links with the Inter-Satellite Omnidirectional Optical Communicator

As the onboard data volume for smaller platforms such as CubeSats increases, Radio Frequency (RF) communications systems may be unable to adequately support the required downlink demand. Optical communications (lasercom) systems can relieve the data bottleneck as they can support higher data throughput than RF for comparable Size, Weight, and Power (SWaP). Lasercom crosslinks are of particular interest for spacecraft swarms and constellations because they enable additional mission robustness for distributed science observations and remote sensing applications. The Inter-Satellite Omnidirectional optical Communicator (ISOC) is capable of supporting simultaneous lasercom crosslinks between multiple spacecraft at separations of up to thousands of kilometers in orbit. The ISOC architecture features a truncated dodecahedron chassis containing an array of photodetectors and gimbal-less MEMS mirrors, enabling full-duplex communications. The main objectives of the ISOC terminal include: 1) full sky coverage, 2) Gbps data rates, and 3) the ability to maintain multiple simultaneous links. We show ISOC can support up to 12 simultaneous links with the current architecture at 1-Gbps at 200-km separation with 10-9 BER. Compared to current lasercom transceivers (i.e., point-to-point), ISOC offers increased throughput performance for similar SWaP. A detailed link budget for both scenarios is presented, and the limiting factors for maximum number of simultaneous links are discussed.

Cahoy, Kerri↗
NASA NTRS1991

Collagen cross-linking in sun-exposed and unexposed sites of aged human skin

A recently described nonreducible, acid-heat stable compound, histidinohydroxylysinonorleucine (HHL), is a collagen cross-link isolated from mature skin tissue. Its abundance is related to chronologic aging of skin. The present communication describes the quantity of HHL from aged human skin of the same individuals in sun-exposed (wrist) and unexposed (buttock) sites. Punch biopsies were obtained from these sites from nine people of age 60 or older. HHL contents (moles/mole of collagen) at these sites were for wrist 0.13 +/- 0.07 and for buttock 0.69 +/- 0.17 (mean +/- SD, p less than 0.001). In addition, it was found that acute irradiation of the cross-linked peptides with UVA (up to 250 J/cm2) and UVB (up to 1 J/cm2) had no effect on HHL structure. The same treatment significantly degraded another nonreducible, stable collagen cross-link, pyridinoline. The results suggest that chronic sunlight exposure may be associated with an impediment to normal maturation of human dermal collagen resulting in tenuous amount of HHL. Thus, the process of photoaging in dermal collagen is different from that of chronologic aging in human skin.

Non-NASA Center↗
NASA NTRS1993

(abstract) High-T(sub c) SNS Weak Links Using Oxide Normal Metals

This work examines device results for edge-geometry SNS weak links utilizing a variety of oxide normal metals. A comparison of the electrical properties of fabricated devices and the magnetic field response will be presented. Device reproducibility will also be discussed. This talk will also examine recent progress in fabrication of epitaxial SNS weak links on silicon-on-sapphire (SOS) substrates. SNS weak links fabricated recently are under investigation, and preliminary results on these devices will be discussed.

SNS weak links oxide normal metals silicon-on-sapp↗
NASA NTRS2023

Spatial Link Coverage Projections for the Glenn Research Center Communication Analysis Suite (GCAS)

Space communications are a fundamental part of every NASA mission, and reliable space communications are essential. Precise planning, simulation, and analysis of communications abilities are needed to know exactly what data rates, visibility times, and signal strength can be expected during the real missions. The goal of this work was to take a 3D icosphere, where each face was a point to be evaluated, and display the link performance onto a 2D projection of celestial bodies for links to a node location that could be spatially located at any of the icosahedral faces. 2D projections were produced for a wide range of spatial link grid sizes and compressed into low-size MAT files for ease of access and rapid implementation. The final icosahedral projections can be displayed onto various celestial body maps, using ultra-high-resolution maps for stitching. The results have proven satisfactory and are planned to support various simulation efforts.

communication link analysis↗
NASA NTRS1972

Coded communication link for an advanced manned spacecraft.

An analysis, in terms of key design parameters, is presented of a digital link for bidirectional communication between an advanced manned spacecraft, such as the space shuttle, and a ground terminal by means of a synchronous communication relay satellite. Performance of both ground to manned spacecraft and return links are compared with and without coding. A breadboard terminal for simulating the two-way link is described. Results of error rate tests are discussed.

Gould, L. M.↗
NASA NTRS1974

Data link relay design

The data link for the Ames baseline probe as applied to the MJU spacecraft specifically with an entry at Uranus is analyzed. A frequency analysis, a trajectory analysis, and a discussion of the effects on the spacecraft design by the data link are presented. The possibilities of a two-way link are considered.

Parsons, P.↗
NASA NTRS1975

Source encoding for orbiter communications links

The feasibility of using data compression to improve link efficiency as an alternative to increased transmitter power, reducing receiver noise figures, increasing antenna gain through more stringent orbiter attitude constraints, etc. is studied. A method of encoding digital data is developed which permits low band-width encoding as well as a unique system of adaptive run length encoding. The effectiveness of these techniques for the air-to-ground link and for the bandwidth-limited ground-to-ground data link used for the orbiter downlink data is evaluated. Results are presented.

Source record↗
NASA NTRS1974

Coding/modulation trade-offs for Shuttle wideband data links

This paper describes various modulation and coding schemes which are potentially applicable to the Shuttle wideband data relay communications link. This link will be capable of accommodating up to 50 Mbps of scientific data and will be subject to a power constraint which forces the use of channel coding. Although convolutionally encoded coherent binary PSK is the tentative signal design choice for the wideband data relay link, FM techniques are of interest because of the associated hardware simplicity and because an FM system is already planned to be available for transmission of television via relay satellite to the ground. Binary and M-ary FSK are considered as candidate modulation techniques, and both coherent and noncoherent ground station detection schemes are examined. The potential use of convolutional coding is considered in conjunction with each of the candidate modulation techniques.

Batson, B. H.↗
NASA NTRS1974

Space Shuttle communications - Wideband direct link signal and system design

This paper describes the design of a wideband S-band communications link from the Space Shuttle Orbiter to a ground-based terminal. This link will be used for transmission of television, digital data (various rates), or analog data, and is of interest because of the presence of bandwidth, power, and hardware constraints. The procedure followed to arrive at an overall signal and system design is outlined, and system performance margins are presented for various operational configurations. Finally, the growth potential of this link for digital data transmission is discussed.

Batson, B. H.↗
NASA NTRS1975

System measurements of a CO2 laser communications link

Measurements were made under simulated operating conditions to establish the capability of a CO2 laser transmitting heterodyne receiver link to acquire weak laser transmitter beams and maintain spatial tracking during communications. For the case of a synchronous satellite-to-earth station link, analysis and laboratory measurements indicate that the infrared heterodyne receiver subsystem is capable of performing the acquisition, acquisition confirm, and spatial tracking functions at IF signal-to-noise ratio of -17 dB. For the case of a low-altitude satellite-to-earth station link, the laser transmit signal is Doppler-shifted due to the difference in relative velocity of the two stations. The resultant Doppler frequency shift varies with time and must be spectrally acquired and tracked.

Peyton, B. J.↗
NASA NTRS1975

A statistical model for telecommunication link design

An evaluation is conducted of the current telecommunication link design technique and a description is presented of an alternative method, called the probability distribution method (PDM), which is free of the disadvantages of the current technique while retaining its advantages. The PDM preserves the simplicity of the design control table (DCT) format. The use of the DCT as a management design control tool is continued. The telecommunication link margin probability density function used presents the probability of achieving any particular value of link performance. It is, therefore, possible to assess the performance risk and other tradeoffs.

Yuen, J. H.↗
NASA NTRS1977

A high-speed computer link for moderate distances and noisy environments

To satisfy the need for a fully duplex high-speed computer data link for the antenna automation project at DSS 13, a very simple and inexpensive scheme was employed. The link requires two coaxial cables over which is sent a unipolar digital frequency modulated signal in which a logical 1 has twice the frequency of a logical 0. Optical isolators and filters reduce ground loop effects and increase noise immunity. Tests conducted in various environments and over different cable lengths at JPL, DSS 14 and DSS 13 have indicated that the link is highly effective.

Sievers, M. W.↗