Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid or ice water path”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Liquid-to-gas transfer of sodium in a liquid cathode glow discharge

Abstract Plasma-liquid interactions have been extensively studied with a focus on the transport of reactive species from the plasma to the liquid phase and their induced liquid phase chemistry and resulting applications. While solute transfer from the liquid to the gas phase in plasmas has been widely used in analytical chemistry, the underlying processes remain relatively unexplored. We report spatially and temporally resolved absolute density measurements of sodium in a plasma with a NaCl solution cathode using two-photon absorption laser induced fluorescence (TaLIF). The observed non-linear increase in sodium density with solution conductivity is shown to correlate with droplet generation as visualized by Mie scattering. The findings are explained by droplet generation by electrospray induced by Taylor cone formation as underpinning mechanism for the introduction of sodium in the plasma. An analytical sheath model combined with a scaling law shows an increase in electric field force with solution conductivity that is consistent with the observed non-linear increase in sodium density in the plasma with solution conductivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Calibration of the liquid argon ionization response to low energy electronic and nuclear recoils with DarkSide-50

DarkSide-50 has demonstrated the high potential of dual-phase liquid argon time projection chambers in exploring interactions of WIMPs in the GeV=c 2 mass range. The technique, based on the detection of the ionization signal amplified via electroluminescence in the gas phase, allows us to explore recoil energies down to the sub-keV range. We report here on the DarkSide-50 measurement of the ionization yield of electronic recoils down to ~180 eV er , exploiting 37 Ar and 39 Ar decays, and extrapolated to a few ionization electrons with the Thomas-Imel box model. Further, we present a model-dependent determination of the ionization response to nuclear recoils down to ~500 eV nr , the lowest ever achieved in liquid argon, using in situ neutron calibration sources and external datasets from neutron beam experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Liquid-Liquid Transition in Water from First Principles

A long-standing question in water research is the possibility that supercooled liquid water can undergo a liquid-liquid phase transition (LLT) into high- and low-density liquids. Here, we used several complementary molecular simulation techniques to evaluate the possibility of an LLT in an ab initio neural network model of water trained on density functional theory calculations with the SCAN exchange correlation functional. We conclusively show the existence of a first-order LLT and an associated critical point in the SCAN description of water, representing the first definitive computational evidence for an LLT in water from first principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Operation of Argonne's Liquid Salt-Liquid Metal Separation Testbed for U/TRU Product Processing

Argonne National Laboratory has constructed a liquid salt-liquid metal separation testbed for use in the development and advancement of cathode processing of U/TRU co‑deposits generated by pyroprocessing of used nuclear fuel. The U/TRU product recovered from the electrorefiner contains adhered and entrained salt that must be removed prior to consolidation of the U/TRU alloy for use in advanced reactor fuel fabrication. The bottom pour operation utilizes the low melting points of U/TRU co‑deposits and higher densities of molten metals compared to molten salts to separate and consolidate the U/TRU product. Argonne’s testbed is designed to support the development and optimization of bottom-pouring configurations for batch and semi-continuous operations, integration of process monitoring and control technologies, and determination of operational requirements for implementing in an industrial setting. Scoping tests were performed to demonstrate operational aspects of the testbed, including operation using single-pour spout and dual-pour spout configurations, effectiveness of salt containment and extent of salt vaporization, and the use of sensor probes to detect the location of the interface between the metal and salt phases during pouring. Recommendations for process optimization testing for further development of bottom pour processing to separate U/TRU alloys from adhered salt were made based on the results of scoping tests. Completing the recommended activities will increase the technical readiness level (TRL) of the liquid salt-liquid metal separation operation and consolidation of U/TRU alloys to support industrialization of pyroprocessing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1973

Study of liquid-solid transition for materials processing in space. Analysis of field effects on dense liquid materials

The behavior of dense liquids near the solidification point under the influence of magnetic fields or near-zero gravity conditions were analyzed within the framework of existing liquid state models and classical field theory. The dynamic body forces which are an effect of the magnetic field on liquids are discussed. It is concluded that both magnetic fields and low gravity conditions produce an increase in the diffusion coefficient which result in an increased growth rate of crystals, and time varying magnetic fields induce eddy currents in the liquid which produce body forces and tend to disrupt convection.

Miller, R. I.↗
NASA NTRS1983

High-pressure liquid chromatography: A brief introduction and its application in analyzing the degradation of a C-ether (Thio-ether) liquid lubricant

The general principles of classical liquid chromatography and high pressure liquid chromatography (HPLC) are reviewed, and their advantages and disadvantages are compared. Several chromatographic techniques are reviewed, and the analytical separation of a C-ether liquid lubricant by each technique is illustrated. A practical application of HPLC is then demonstrated by analyzing a degraded C-ether liquid lubricant from full scale, high temperature bearing tests.

Source record↗
NASA NTRS1986

Experiments on annular liquid jet instability and on the formation of liquid shells

An annular jet flow of liquid surrounding a flow of gas at its core is extremely unstable. Experiments are described in which such a flow is generated by an annular nozzle operated at fairly specific conditions. It is shown that periodic, axisymmetric oscillations arise spontaneously within the cylindrical sheet emerging from the nozzle and grow with such rapidity along the axial dimension that a sealing-off and encapsulation of the core gas occurs within a few jet diameters. This is closely followed by a pinchoff of the liquid between adjacent bubbles. The liquid shells set free thereby assume spherically symmetric form under capillary forces, and each contains a precisely uniform measure of gas and of liquid on account of the extremely high frequency-stability of the process. Description is given of the fluid dynamic processes by which the shells are formed, and mention is made of exploiting the instability for the production of rigid shells for technological applications.

Kendall, J. M.↗
NASA NTRS1990

Kinetics of gas-to-liquid and liquid-to-solid transfer of particles in metal-matrix composites

Analytical models for transfer of particles from gas to liquid and from liquid to solid are introduced. The model for calculation of the pushing/engulfment transition in directionally solidified particulate metal matrix composites, considers process thermodynamics, process kinetics, thermophysical properties and buoyant forces. Based on processing variables (solidification velocity and direction) and on material variables (interface energies, particle size, particle and liquid density, volume fraction of particles and particle/liquid thermal conductivity ratio) four types of behavior were predicted. Also, two numerical models for liquid-to-solid transfer are discussed, as well as the limitations of presently available models.

Stefanescu, D. M.↗
NASA NTRS1993

Transport phenomena in the crystallization of lysozyme by osmotic dewatering and liquid-liquid diffusion in low gravity

Two methods of protein crystallization, osmotic dewatering and liquid-liquid diffusion, like the vapor diffusion (hanging-drop and sessile-drop) methods allow a gradual approach to supersaturation conditions. The crystallization of hen egg-white lysozyme, an extensively characterized protein crystal, in the presence of sodium chloride was used as an experimental model with which to compare these two methods in low gravity and in the laboratory. Comparisons of crystal growth rates by the two methods under the two conditions have, to date, indicated that the rate of crystal growth by osmotic dewatering is nearly the same in low gravity and on the ground, while much faster crystal growth rates can be achieved by the liquid-liquid diffusion method in low gravity.

Todd, Paul↗
NASA NTRS1993

Foil bearing performance in liquid nitrogen and liquid oxygen

Space transfer vehicles and other power and propulsion systems require long-life turbopumps. Rolling-element bearings used in current turbopumps do not have sufficient life for these applications. Process fluid foil bearings have established long life, with exceptional reliability, over a wide range of temperatures and fluids in many high-speed turbomachinery applications. However, actual data on bearing performance in cryogenic fluids has been minimal. The National Aeronautics and Space Administration (NASA) and AlliedSignal Aerospace Systems and Equipment (ASE) have attempted to characterize the leaf-type compliant foil bearing in oxygen and nitrogen. The work performed under a joint internal research and development program between Marshall Space Flight Center (MSFC) and ASE demonstrated that the foil bearing has load capacities of at least 266 psi in liquid oxygen and 352 psi in liquid nitrogen. In addition, the bearing demonstrated a direct damping coefficient of 40 to 50 lb-sec/in. with a damping ratio of .7 to 1.4 in. liquid nitrogen using a bearing sized for upper-stage turbopumps. With the results from this testing and the years of successful use in air cycle machines and other applications, leaf-type compliant foil bearings are ready for testing in liquid oxygen turbopumps.

Genge, Gary G.↗
NASA NTRS2009

Bubble Point Measurements with Liquid Methane of a Screen Capillary Liquid Acquisition Device

Liquid acquisition devices (LADs) can be utilized within a propellant tank in space to deliver single-phase liquid to the engine in low gravity. One type of liquid acquisition device is a screened gallery whereby a fine mesh screen acts as a bubble filter and prevents the gas bubbles from passing through until a crucial pressure differential condition across the screen, called the bubble point, is reached. This paper presents data for LAD bubble point data in liquid methane (LCH4) for stainless steel Dutch twill screens with mesh sizes of 325 by 2300 and 200 by 1400 wires per inch. Data is presented for both saturated and sub-cooled LCH4, and is compared with predicted values.

Jurns, John M.↗
NASA NTRS2009

Bubble Point Measurements with Liquid Methane of a Screen Channel Capillary Liquid Acquisition Device

Liquid acquisition devices (LADs) can be utilized within a propellant tank in space to deliver single-phase liquid to the engine in low gravity. One type of liquid acquisition device is a screened gallery whereby a fine mesh screen acts as a 'bubble filter' and prevents the gas bubbles from passing through until a crucial pressure differential condition across the screen, called the bubble point, is reached. This paper presents data for LAD bubble point data in liquid methane (LCH4) for stainless steel Dutch twill screens with mesh sizes of 325 by 2300. These tests represent the first known nonproprietary effort to collect bubble point data for LCH4.

Jurns, John M.↗
DOE OSTI2021

Ultraclean hybrid poplar lignins via liquid–liquid fractionation using ethanol–water solutions

As recovered from the byproducts stream of a cellulosic ethanol biorefinery, the renewable biopolymer lignin is too impure and polydisperse for many proposed applications. By mixing a hybrid poplar lignin with hot ethanol–water solutions, two liquid phases, one polymer-rich and one solvent-rich, are created. This liquid–liquid equilibrium phenomenon was used to generate solvated (and thus liquefied) lignin fractions of controlled molecular weight for which the impurities analyses for sugars and ash were near or below the limits of detection. Furthermore, those carbohydrates and metals impurities end up highly concentrated in a single process stream also having potential value.

09 BIOMASS FUELS↗
DOE OSTI2024

4D-STEM Mapping of Nanocrystal Reaction Dynamics and Heterogeneity in a Graphene Liquid Cell

Chemical reaction kinetics at the nanoscale are intertwined with heterogeneity in structure and composition. However, mapping such heterogeneity in a liquid environment is extremely challenging. Here, in this work, we integrate graphene liquid cell (GLC) transmission electron microscopy and four-dimensional scanning transmission electron microscopy to image the etching dynamics of gold nanorods in the reaction media. Critical to our experiment is the small liquid thickness in a GLC that allows the collection of high-quality electron diffraction patterns at low dose conditions. Machine learning-based data-mining of the diffraction patterns maps the three-dimensional nanocrystal orientation, groups spatial domains of various species in the GLC, and identifies newly generated nanocrystallites during reaction, offering a comprehensive understanding on the reaction mechanism inside a nanoenvironment. This work opens opportunities in probing the interplay of structural properties such as phase and strain with solution-phase reaction dynamics, which is important for applications in catalysis, energy storage, and self-assembly.

four-dimensional scanning transmission electron mi↗
DOE OSTI2021

Vapor-Liquid Partitioning of Methylmercury Compounds: Fundamental Data to Support the Savannah River Site Liquid Waste System: Henry's Law, Solubility and Vapor Pressure Determination for Representative Methylmercury Compounds

The Savannah River Site (SRS) Liquid Waste System (LWS) contains approximately 66 tons of mercury within the liquids, salts, and sludges that are currently being processed into final wasteforms for disposal. Mercury concentrations within the system exceed those typically experienced in environmental or industrial systems; thus, management of mercury compounds continues to be a priority for SRS. In the LWS, waste is vitrified into a borosilicate glass wasteform that contains most of the radioactivity, while the lower activity solutions are dispositioned in a low-level grout wasteform, or “saltstone”. The alkaline, high ionic strength caustic wastes are pumped, evaporated, and otherwise managed throughout the LWS and Defense Waste Processing Facility (DWPF) as they are stored and prepared for conversion to the final wasteforms. Because of the complexity of this system, a key component of effective mercury management in the LWS requires analysis of mercury in various physical phases. The high concentration of mercury within the SRS LWS has the potential to generate vapor-phase contamination. Elemental mercury (Hg 0 ), dimethylmercury ((CH 3 ) 2 Hg), and methylmercury (CH 3 Hg + ) are among species known or suspected to contribute to the flux of mercury from liquid to vapor phase (Iverfeldt and Lindquist, 1982). Chemical speciation affects not only mercury behavior in LWS operations but may also affect the performance of mercury treatment and removal technologies in the LWS.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

An Innovative Zero-Liquid Discharge Intermediate-Cold-Liquid Eutectic-Freeze Desalination System

A novel freeze desalination technology is presented for purification of water produced from various industrial processes, including oil and gas extraction. The main innovative idea is introducing a water-immiscible intermediate-cold-liquid (ICL) medium which absorbs the cold from a refrigeration cycle and transfers it to a freezing chamber where it is mixed with brine. The cold ICL enters the freezing chamber at temperatures between -10°C to -30°C. Precooled brine in injected into the freezing chamber and pure water freezes out of the brine upon mixing with the ICL. The rate of freezing inside the chamber is controlled by adjusting the flow rate of the cold ICL relative to the inlet brine. Both eutectic freeze and non-eutectic freezing are possible by controlling the temperature of the freezing chamber. The solid-liquid slurry created in the freezing chamber flows to a filter separation unit after passing through a separation column. The ice crystals are separated from the liquid by a rotary filter device. The collected ice is rinsed by a centrifugal unit. The rinsed ice is melted to produce fresh water. The developed technology resolves the issues common to current freeze-desalination systems while offering superior heat transfer performance ascribed to direct-contact between the cooling medium and the brine in addition to producing solid salt and pure water. The system operates under atmospheric pressure. The low operation temperature minimizes the corrosion issues common in systems exposed to brine. Also, due to the low operating temperature, there are no concerns about evaporation of volatile organics from the produced water during the treatment. The developed technology effectively eliminates the use of chemicals for pretreatment of brine. The system can be constructed from commercially available components. Extensive testing using a lab-scale prototype by using synthetic brine and actual produced water with TDS values from 50,000 ppm to 300,000 ppm showed that freshwater could be achieved with relatively small dependency on the quality of the input brine. The quality of the treated water was found to be mainly a function of the duration of the centrifugal process. Treated water with TDS as low as 200 ppm could be achieved in the tests. Thermo-economic modeling coupled with system level thermochemical process model were developed for prediction of the LCOW. The LCOW was predicted to be $\$$0.50 to $\$$0.90 per barrel of produced water. The potential markets for deployment of the technology are the oil and gas, in-land thermoelectric powerplants, RO desalination plants, and mining industry.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Liquid Crystal Orientation and Shape Optimization for the Active Response of Liquid Crystal Elastomers

Liquid crystal elastomers (LCEs) are responsive materials that can undergo large reversible deformations upon exposure to external stimuli, such as electrical and thermal fields. Controlling the alignment of their liquid crystals mesogens to achieve desired shape changes unlocks a new design paradigm that is unavailable when using traditional materials. While experimental measurements can provide valuable insights into their behavior, computational analysis is essential to exploit their full potential. Accurate simulation is not, however, the end goal; rather, it is the means to achieve their optimal design. Such design optimization problems are best solved with algorithms that require gradients, i.e., sensitivities, of the cost and constraint functions with respect to the design parameters, to efficiently traverse the design space. In this work, a nonlinear LCE model and adjoint sensitivity analysis are implemented in a scalable and flexible finite element-based open source framework and integrated into a gradient-based design optimization tool. To display the versatility of the computational framework, LCE design problems that optimize both the material, i.e., liquid crystal orientation, and structural shape to reach a target actuated shapes or maximize energy absorption are solved. Multiple parameterizations, customized to address fabrication limitations, are investigated in both 2D and 3D. The case studies are followed by a discussion on the simulation and design optimization hurdles, as well as potential avenues for improving the robustness of similar computational frameworks for applications of interest.

42 ENGINEERING↗