Search NASA⌕ Search

SEARCH · Search NASA

Results for “lithium diffusion rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Study on hydrogen isotopes permeation in fluidized state of liquid lithium-lead

Lithium-lead (Li-Pb) is one of the most promising candidate materials for the liquid blanket of fusion reactors. Hydrogen transfer under a fluidized condition of Li-Pb is investigated experimentally to design a Li-Pb blanket system. Li-Pb eutectic alloy flows inside a Ni tube in the experimental system, where H{sub 2} permeates into and out of the forced Li-Pb flow. The overall H{sub 2} permeation rate is analyzed using a mass balance model. Hydrogen atoms diffuse in Ni and Li-Pb. The steady-state H{sub 2} permeation rate obtained by this experiment is smaller than the result of the calculation model. A resistance factor is introduced to the present analysis in order to evaluate the influence of other H{sub 2} transfer mechanisms, such as diffusion in Li-Pb and dissolution reaction between Ni and Li-Pb. The contribution of the resistance to the overall H{sub 2} permeation rate becomes large when the flow rate of Li-Pb is low. This is because the boundary layer thickness between Ni and Li-Pb affects the overall H{sub 2} permeation rate. When the flow velocity of Li-Pb increases, the thickness of the boundary layer becomes thin, and the driving force of H{sub 2} permeation through the Ni wall becomes bigger. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiation Damage Workshop

The availability of data regarding the radiation behavior of GaAs and silicon solar cells is discussed as well as efforts to provide sufficient information. Other materials are considered too immature for reasonable radiation evaluation. The lack of concern over the possible catastrophic radiation degradation in cascade cells is a potentially serious problem. Lithium counterdoping shows potential for removing damage in irradiated P-type material, although initial efficiencies are not comparable to current state of the art. The possibility of refining the lithium doping method to maintain high initial efficiencies and combining it with radiation tolerant structures such as thin BSF cells or vertical junction cells could provide a substantial improvement in EOL efficiencies. Laser annealing of junctions, either those formed ion implantation or diffusion, may not only improve initial cell performance but might also reduce the radiation degradation rate.

Stella, P. M.↗

Tetrahedral Lithium Stuffing in Disordered Rocksalt Cathodes for High-Power-Density and Energy-Density Batteries

Li-rich cation-disordered rocksalt (DRX) materials introduce new paradigms in the design of high-capacity Li-ion battery cathode materials. However, DRX materials show strikingly sluggish kinetics due to random Li percolation with poor rate performance. Here, in this study, we demonstrate that Li stuffing into the tetrahedral sites of the Mn-based rocksalt skeleton injects a novel tetrahedron-octahedron-tetrahedron diffusion path, which acts as a low-energy-barrier hub to facilitate high-speed Li transport. Moreover, the enhanced stability of lattice oxygen and the suppression of transition metal migration preserve the efficacy of the Li percolation network during cycling. Overall, the tetrahedral Li stuffing DRX material exhibits high energy density (311 mAh g -1 , 923 Wh kg -1 ) and high power density (251 mAh g -1 , 697 Wh kg -1 at 1000 mA g -1 ). Our results highlight the potential to develop high-performance and earth-abundant cathode materials within the extensive range of rocksalt compounds.

Disordered Rocksalt Cathodes↗

Recent Progress in Synthesis and Application of Low-Dimensional Silicon Based Anode Material for Lithium Ion Battery

Silicon is regarded as the next generation anode material for LIBs with its ultra-high theoretical capacity and abundance. Nevertheless, the severe capacity degradation resulting from the huge volume change and accumulative solid-electrolyte interphase (SEI) formation hinders the silicon based anode material for further practical applications. Hence, a variety of methods have been applied to enhance electrochemical performances in terms of the electrochemical stability and rate performance of the silicon anodes such as designing nanostructured Si, combining with carbonaceous material, exploring multifunctional polymer binders, and developing artificial SEI layers. Silicon anodes with low-dimensional structures (0D, 1D, and 2D), compared with bulky silicon anodes, are strongly believed to have several advanced characteristics including larger surface area, fast electron transfer, and shortened lithium diffusion pathway as well as better accommodation with volume changes, which leads to improved electrochemical behaviors. Finally, in this review, recent progress of silicon anode synthesis methodologies generating low-dimensional structures for lithium ion batteries (LIBs) applications is listed and discussed.

25 ENERGY STORAGE↗

Prospect of Thermal Shock Induced Healing of Lithium Dendrite

Dendritic growth plagues the development of rechargeable lithium metal anodes. Recently, it has been reported that self-heating of the cell provides a mitigation strategy for suppressing dendrites. In order to study this phenomenon, we extend our recently developed nonlinear phase-field model to incorporate an energy balance equation allowing a full thermally coupled electrodeposition model using the open-source software package MOOSE. In this study, we consider the interplay between ionic transport and electrochemical reaction rate as a function of temperature and explore the possibility of using thermal shock induced dendrite suppression. We discover that, depending on the electrochemical reaction barrier and ionic diffusion barrier, self-heating could accelerate (larger reaction barrier) or decelerate (larger diffusion barrier) dendrite formation. Given that the electrolyte constituents can be used to tune both barriers, this study could provide an important avenue to exploit the self-heating effect favorably through electrolyte engineering.

25 ENERGY STORAGE↗

Lithiation of multilayer Ni/NiO electrodes: criticality of nickel layer thicknesses on conversion reaction kinetics

X-ray reflectivity and transmission electron microscopy (TEM) were used to characterize the morphological changes in thin film electrodes with alternating Ni and NiO layers during lithiation as a function of the Ni buffer layer thickness. Complete lithiation of the active NiO layers occurs only when the thickness of the Ni/NiO bilayers are less than 75 Å – a threshold value that is determined by the sum of the Ni quantity in the Ni/NiO bilayer of the multilayer stack. Thicker Ni/NiO bilayers present a kinetic barrier for lithium ion diffusion inside the stack resulting in partial lithiation of the multilayer electrodes in which only the top NiO layer lithiates. Lithiation of NiO layers in a multilayer stack also leads to an interface-specific reaction that is observed to increase the thicknesses of adjacent Ni layers by 3–4 Å and is associated with the formation of a low-density Li 2 O layer, corresponding to an interfacially-driven phase separation of the NiO. Rate dependent cyclic voltammetry studies reveal a linear relation between the peak current and scan rate suggesting that the lithiation kinetics are controlled by charge transfer resistance at the liquid–solid interface.

25 ENERGY STORAGE↗

Embedding sulfur into N-doped carbon nanospheres as enhanced cathode for high-performance lithium-sulfur batteries

Graphical abstract: S has been successfully embedded into N-doped carbon nanospheres as enhanced cathode exhibiting good performance with high specific capacity and cycling stability. - Highlights: • Construct N-doped carbon nanospheres (N-CNSs) are host for sulfur. • N-CNSs/S cathode show high capacity and good cycles. • N doping is favorable for fast ion/electron transfer. - Abstract: Lithium-sulfur (Li-S) batteries are considered as one of the most efficient power candidates owing to high energy density about 7–10 times larger than the commercial cathode materials. However, its practical application is impeded by severe “shuttle effect” and low cycle stability. As a consequence, in this work, we report N-doped carbon nanospheres (N-CNSs) composited with S as cathode for Li-S batteries. The stacked carbon nanosphere structure can not only improve the conductivity of cathode, but also work as barriers to retard diffusion of intermediate polysulfide. Owing to the unique structure, the N-CNSs/S cathode exhibits superior electrochemical performances with high specific capacity (1228 mAh g{sup −1} at 0.1 C), and excellent rate capability as well as good cyclic life. Our smart designed strategy may promote the development of high performance Li-S batteries.

36 MATERIALS SCIENCE↗

Tuning inner-layer oxygen functional groups of reduced graphene oxide by potentiostatic oxidation for high performance electrochemical energy storage devices

The electrochemical lithiation/delithiation of oxygen-containing functional groups (OCFGs) of nanocarbon materials, particularly graphene, have attracted intensive interest in recent years. Here, we propose a controllable potentiostatic oxidation approach to tune the OCFGs of as-prepared reduced graphene oxide (rGO) in a carbonate-based electrolyte to improve the specific capacity and rate capability. Furthermore, by X-Ray absorption spectroscopy in total fluorescence yield mode and X-Ray diffraction, we confirm that potentiostatic oxidations generate new OCFGs in the inner-layer of rGO. The content of OCFGs increases as oxidation potential being elevated. Such increasing of OCFGs in quantity significantly enhances the capacity. For instance, the specific capacity of 170.4 mAh g -1 for pristine rGO electrode is increased to 290.5 mAh g -1 after the oxidation at 5.0 V. Finally, we demonstrate that oxidations at moderate potentials can reduce the electrochemical and ohmic polarizations of rGO electrodes without deteriorating diffusion dynamic, thereby improving rate capability. After the optimal oxidation at 4.7 V, rGO electrode exhibits an excellent rate capability, delivering 58.4 mAh g -1 at 20 A g -1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D–Integrated, Multi–Functional Carbon Fibers for Stable, High–Areal–Capacity Batteries

Increasing lithium-ion batteries' (LIBs) electrode areal capacity can boost energy density and lower manufacturing costs, but faces challenges in manufacturing, rate performance, and cycling stability. A conductive framework made of commercial micro-sized carbon fibers (Cfs) is presented that serves as a host for both the LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC 532) cathode and Cfs anode. The Cf framework has multiple functions that offer high electronic conductivity (270 mS cm –1 ), low tortuosity (1.7), low Li + diffusion resistance (22 Ω), and high thermal conductivity (200 W mK –1 ). Additionally, the Cf-integrated electrodes can have an extremely high mass loading of NMC 532 (70 mg cm –2 ) with a theoretical capacity of 14 mAh cm –2 . Thus, the practical full cells assembled with the Cfs-enabled electrodes exhibit an initial areal capacity of 4.1 mAh cm –2 and capacity retention of 90.4% at 500 cycles at a cycling rate of C/3, 1.5 mA cm –2 . Data collected from the operando isothermal microcalorimetry suggest that full cells utilizing the Cf anode experience less heat release from side reactions compared to cells utilizing a conventional graphite anode. Finally, this present approach is scalable and cost-effective and can fabricate practical LIBs that boast high areal capacity, rate performance, and a lengthy cycling lifetime.

25 ENERGY STORAGE↗

Graphene foam integrated with lithium titanate as anode of Li ion batteries

Graphical abstract: Integrated graphene foam supported LTO electrodes are synthesized via a hydrothermal method and exhibit a noticeable electrochemical performance as cathode of Li ion batteries. - Highlights: • Integrated graphene foam supported LTO electrodes are synthesized. • Self-supported GF/LTO electrodes show high electrochemical performance. • Integrated porous architecture is favorable for capacity enhancement. - Abstract: In this work, we construct a binder-free electrode by integrating Li{sub 4}Ti{sub 5}O{sub 12} (LTO) nanoparticles onto free-standing graphene foam (GF) via hydrothermal method. The CVD-grown GF is used as the backbone for the deposition of LTO nanoparticles of 20–50 nm. Enhanced reaction kinetics including fast ion/electron transfer is achieved with the help of conductive GF matrix. The electrochemical performance of the VG/LTO as the anode of Li ion batteries (LIBs) are studied and demonstrated with a capacity of 171 mAh g{sup −1} at 1 C, and good cycles with a capacity retention of 77%. High-rate capability is also verified with a capacity of 108 mAh g{sup −1} at 10 C. The designed porous integrated architecture is favorable for the diffusion of ion/electrons, and good contact with the electrolyte. Our results provide a new way for developing high-performance anode of LIBs.

36 MATERIALS SCIENCE↗

Analysis of redox additive-based overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection, has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. Digital simulation of the overcharge experiment leads to numerical representation of the potential transients, and estimate of the influence of diffusion coefficient and interelectrode distance on the transient attainment of the steady state during overcharge. The model has been experimentally verified using 1,1-prime-dimethyl ferrocene as a redox additive. The analysis of the experimental results in terms of the theory allows the calculation of the diffusion coefficient and the formal potential of the redox couple. The model and the theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗

Finite linear diffusion model for design of overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. The model has been experimentally verified using 1,1-prime-dimethylferrocene as a redox additive. The theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗

Extreme fast charging characteristics of zirconia modified LiNi 0.5 Mn 1.5 O 4 cathode for lithium ion batteries

LiNi 0.5 Mn 1.5 O 4 is a promising high-voltage cathode for lithium-ion battery fast charging applications. Aware of its electrochemical stability issues, the material's surface is modified with small amounts of zirconia (ZrO 2 ) ranging from 0.5 to 2 wt% using a scalable ball milling process. The advantage of the coating has been demonstrated in electrochemical measurements performed at room temperature and 55 °C, and in cells discharged under high-rate conditions up to 80C. Of significance, the material coated with 1.0 wt% ZrO 2 has been cycled at the 40C rate for over a thousand cycles and retains 86% of its initial capacity. The material with 2.0 wt% ZrO 2 modification preserves 76% of its initial capacity when cycled at the 40C rate and 55 °C. The coated materials have shown excellent cycling stability when subjected to 6C (10-min) fast charging and C/3 discharging for 300 cycles. Compared to the uncoated material, the interfacial resistance of the zirconia modified LiNi 0.5 Mn 1.5 O 4 has been found to be much lower and does not significantly increase with increasing the coating amount. However, the electrochemical performances are still partly limited by both interfacial resistance at the beginning of charge and electrolyte diffusivity, particularly under higher rate cycling conditions. Altogether, the strategy of ZrO 2 surface modification applied to LiNi 0.5 Mn 1.5 O 4 unveils the potential that the material could play in extreme fast charged electric vehicles.

25 ENERGY STORAGE↗

Mitigation of Shuttle Effect in Li–S Battery Using a Self-Assembled Ultrathin Molybdenum Disulfide Interlayer

Lithium–sulfur batteries are promising for low-cost and high-energy storage, but their applications are still limited by poor cycling stability owing to soluble lithium polysulfide shuttling during battery operation. Avoiding shuttle effect is challenging but it is essential to avoid active material loss and prevent performance decay. We use an ultrathin layer of MoS 2 with thickness of 10–40 nm, which is 1–2 orders of magnitude thinner than conventional interlayers, for Li–S batteries to mitigate polysulfide shuttling. The MoS2 layer formed by exfoliated nanoflakes is deposited by the scalable liquid-based self-assembly method. With less than 1% of additional weight in the cathode, the MoS 2 interlayer with complete coverage inhibits polysulfide diffusion across the separator and therefore remarkably improves the battery performances. Reversible specific capacity reaches 1010 and 600 mA h g –1 at 0.5 and 2C rates, respectively, which decay slowly over 400 cycles (0.11% per cycle). Moreover, the MoS 2 films with high density of catalytic active flake edges enable high areal sulfur loading up to 10 mg cm –2 and areal capacity up to 9.7 mA h cm –2 at a current density of 3.2 mA cm –2 .

25 ENERGY STORAGE↗

Structural and Electrochemical Characteristics of Ca-Doped “Flower-like” Li 4 Ti 5 O 12 Motifs as High-Rate Anode Materials for Lithium-Ion Batteries

Doped motifs offer an intriguing structural pathway toward improving conductivity for battery applications. Specifically, Ca-doped, three-dimensional “flower-like” Li 4–x Ca x Ti 5 O 12 (“x” = 0, 0.1, 0.15, and 0.2) micrometer-scale spheres have been successfully prepared for the first time using a simple and reproducible hydrothermal reaction followed by a short calcination process. The products were experimentally characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) mapping, inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge–discharge testing. Calcium dopant ions were shown to be uniformly distributed within the LTO structure without altering the underlying “flower-like” morphology. The largest lattice expansion and the highest Ti 3+ ratios were noted with XRD and XPS, respectively, whereas increased charge transfer conductivity and decreased Li + -ion diffusion coefficients were displayed in EIS for the Li 4–x Ca x Ti 5 O 12 (“x” = 0.2) sample. The “x” = 0.2 sample yielded a higher rate capability, an excellent reversibility, and a superior cycling stability, delivering 151 and 143 mAh/g under discharge rates of 20C and 40C at cycles 60 and 70, respectively. In addition, a high cycling stability was demonstrated with a capacity retention of 92% after 300 cycles at a very high discharge rate of 20C. In addition, first-principles calculations based on density functional theory (DFT) were conducted with the goal of further elucidating and understanding the nature of the doping mechanism in this study. The DFT calculations not only determined the structure of the Ca-doped Li 4 Ti 5 O 12 , which was found to be in accordance with the experimentally measured XPD pattern, but also yielded valuable insights into the doping-induced effect on both the atomic and electronic structures of Li 4 Ti 5 O 12 .

25 ENERGY STORAGE↗

Electrochemical characterization for lithium vanadium phosphate with different calcination temperatures prepared by the sol–gel method

Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C (LVP/C) composite materials were synthesized via a sol–gel method with oxalic acid as the chelating agent and polyethylene glycol (PEG) as the supplementary carbon source. The oxalic acid and PEG serve as double carbon sources. This study focused on the effect of different calcination temperatures on the electrochemical properties of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}. The diffraction peaks for all of the samples are well indexed to monoclinic Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} with a P2{sub 1}/n space group. The TGA data indicate that the residual carbon content of LVP/C-700 is the highest (i.e., 2.31 wt.%), and as the calcination temperature increased, the residual carbon content of the material gradually decreased. SEM and TEM analyses indicated that the LVP particles that were calcined at 700 °C exhibit a uniform particle size distribution and the carbon coating exhibited a complete and orderly moderate thickness. The LVP/C-700 material exhibits the best electrochemical performance in the voltage range of 3.0 to 4.3 V and 0.1 C where the initial discharge capacity can reach 128.98 mAh g{sup −} {sup 1}. Even after 200 cycles, the discharge capacity was 119.31 mAh g{sup −} {sup 1}, and the capacity retention rate was 92.49%. - Highlights: • Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite materials have been synthesized via a sol–gel method with double carbon sources. • The different calcination temperatures affect the grain growth and crystallinity of the Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C materials. • The LVP/C-700 material exhibites the largest lithium ion diffusivity and electronic conductivity.

36 MATERIALS SCIENCE↗

Electrode Modification by Laser Ablation to Overcome Mechanical and Scalability Limitations of Solid-State Prealkylation of Electrode Architectures

In this work, laser ablation of Si electrode surfaces is utilized to provide localized strain relief during the Solid State Prealkylation of Electrode Architectures (SPEAR) process, in addition to volumetric expansion relief in the form of free volume channels across the electrode. A hexagonal mesh patterning was employed via laser ablation, where the hexagonal diameter (pitch) was varied from 250 to 1000 µm. It was demonstrated that these channels serve as expansion voids, accommodating the increase in electrode thickness observed during SPEAR and preventing cracking at the electrode surface. Optical microscopy and Raman mapping confirm that Li diffusion is the rate-limiting solid-state process, requiring a 24 h rest period to achieve homogeneous LixSi alloying through the electrode bulk. Electrochemical evaluations in full cells show that a 1000 μm pitch pattern yields a high initial discharge capacity of 2485 mA h g–1 and 86.4% capacity retention after 80 cycles, whereas smaller pitches (<500 μm) result in lithium plating at 4.1 V in full cells paired with NMC 811 due to excessive current collector exposure from the ablation process. XPS analysis reveals that the laser treatment modifies the electrode surface by increasing the Si–O and C–O species, changing the SEI composition observed via an increase in fluorophosphates upon cycling.

Musgrove, Amanda [ORNL] (ORCID:0009000220910389)↗

Physics of lithium bromide (LiBr) solution dewatering through vapor venting membranes

The physics of water desorption from a lithium bromide (LiBr) solution flow through an array of microchannels capped by a porous membrane is studied. The membrane allows the vapor to exit the flow and retains the liquid. Effects of different parameters such as wall temperature, solution and vapor pressures, and solution mass flux on the desorption rate were studied. Two different mechanisms of desorption are analyzed. These mechanisms consisted of: (1) direct diffusion of water molecules out of the solution and their subsequent flow through the membrane and (2) formation of water vapor bubbles within the solution and their venting through the membrane. Direct diffusion was the dominant desorption mode at low surface temperatures and its magnitude was directly related to the vapor pressure, the solution concentration, and the heated wall temperature. Desorption at the boiling regime was predominantly controlled by the solution flow pressure and mass flux. Microscale visualization studies suggested that at a critical mass flux, some bubbles are carried out of the desorber through the solution microchannels rather than being vented through the membrane. Overall, an order of magnitude higher desorption rate compare to a previous study on a membrane-based desorber was achieved. Published by Elsevier Ltd.

Isfahani, RN↗