Search NASA⌕ Search

SEARCH · Search NASA

Results for “load changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Strain-path change tests and physically based polycrystalline modeling of the behavior of recrystallized zirconium alloys - 2016-0092

Zirconium alloys used as cladding tubes for the fuel of pressurized water reactors can undergo high applied stress during power transients. In these conditions, biaxial loading may lead to plastic deformation of the cladding. A comprehensive understanding of the material mechanical response during loading-path change tests is an important step toward predicting the behavior in these specific conditions. Using a nonstandard mechanical testing machine, we conducted loading-path change tests at 623 K on as-received recrystallized Zircaloy-4 tubes. These tests consisted of an axial tensile loading and unloading followed by an internal pressure (or pure hoop tension) loading and unloading. These tests examined the kinematic and isotropic hardening components of the strain hardening behavior of the thin cladding tubes. The isotropic hardening was attributed to dislocation multiplication and dislocation-dislocation interactions. The kinematic hardening was attributed to the interaction of the grains with each other. A polycrystalline model was also used and improved in order to simulate the tests. A good prediction of the isotropic and kinematic hardening was provided by the modeling. (authors)

36 MATERIALS SCIENCE↗
DOE OSTI2018

Understanding the unique sorption of alkane- α , ω -diols in silicalite-1

Adsorption equilibria of alkane-α, ω-diols (propane-1,3-diol, butane-1,4-diol, pentane-1,5-diol, and hexane-1,6-diol) from aqueous solution onto an all-silica zeolite of the type mordenite framework inverted (MFI, also known as silicalite-1) are obtained by simulations and experiments at T = 323 K and also for pentane-1,5-diol (C5) at 348 and 383 K. After an initial slow rise, isotherms at T = 323 K exhibit steep changes in loading, reaching saturation at 10, 9, 8, and 7 molec/uc as the number of carbon atoms of the diols increases from 3 to 6. The abrupt change in loading corresponds to a minimum in the free energy of adsorption (from vapor to zeolite) that is associated with a rapid rise in the number of hydrogen bonds per sorbate molecule due to the formation of large clusters. For C5 at low loading, the centers-of-mass primarily occupy the channel intersections with oxygens oriented along the straight channels where intermolecular hydrogen bonds are formed. At saturation loading, the C5 centers-of-mass instead occupy the straight and zig-zag channels, and nearly all C5 molecules are involved in a percolating hydrogen-bonding network (this also occurs for C6). With increasing temperature, the C5 isotherm decreases in steepness as the minimum in free energy of adsorption decreases in depth and a less-ordered structure of the adsorbed molecules results in a lower number of diol–diol hydrogen bonds. However, the C5 isotherm does not shift significantly in concentration of the adsorption onset, as the free energies of solvation and adsorption increase by similar and compensating amounts. At T = 323 and 348 K, the steep change for the C5 adsorption isotherm is found to be a phase transition (as indicated by a bimodal distribution of unit cell occupancies at intermediate loading) from a less-dense phase with only small hydrogen-bonded clusters to an ordered solid phase with loadings of 8 molec/uc. At T = 383 K, the sorbates are less ordered, the distribution of occupancies becomes unimodal at intermediate loading, and the loading rises more gradually with concentration. Lastly, several different enhanced sampling methods are utilized for these simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures

Cold rolling can be used in-process or post-process to improve microstructure, mechanical properties and residual stress in directed-energy-deposition techniques, such as the high deposition rate wire + arc additive manufacturing (WAAM) process. Finite element simulations of the rolling process are employed to investigate the effect of rolling parameters, in particular rolling load and roller profile radius on the residual stress field as well as plastic strain distribution for the profiled roller. The results show the response to rolling of commonly used structural metals in WAAM, i.e., AA2319, S335JR steel and Ti-6Al-4V, taking into account the presence of residual stresses. The rolling load leads to changes in the location and the maximum value of the compressive residual stresses, as well as the depth of the compressive residual stresses. However, the roller profile radius only changes the maximum value of these compressive residual stresses. Changing the rolling load influences the equivalent plastic strain close to the top surface of the wall as well as in deeper areas, whereas the influence of the roller profile radius is negligible. The plastic strain distribution is virtually unaffected by the initial residual stresses prior to rolling. Finally, design curves were generated from the simulations for different materials, suggesting ideal rolling load and roller profile combinations for microstructural improvement requiring certain plastic strains at a specific depth of the additive structure.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Surface complexation model of rare earth element adsorption onto bacterial surfaces with lanthanide binding tags

© 2019 Elsevier Ltd Lanthanide binding tags (LBTs) have been engineered onto the cell surface of E. coli to enhance biosorption and recovery of rare earth elements (REEs). The protonation behavior of the bacterial surfaces before and after LBT-display was compared by modeling acid-base titration data. A multiple discrete site, constant capacitance surface complexation model was constructed to examine rare earth (Tb) binding to cell surface functional groups, comparing wild type and LBT-engineered surfaces. Our acid-base titrations show similar pKa values between the two strains, suggesting induction of LBTs does not significantly alter cell surface protonation behavior. Tb sorption onto the wild type cell surface can be captured by a one-site carboxyl model. The LBT strain exhibited a higher metal loading that can be explained by the increase of sorption sites in the form of lanthanide binding tags. Furthermore, carboxyl site concentrations between wild type and LBT-induced cells were statistically indistinguishable. We thus attribute the engineered strains’ increase in Tb adsorption capacity and affinity to the addition of lanthanide binding tags to the cell surface. The Tb stability constant with the LBT site is two orders of magnitude higher than that with the carboxyl functional group. As a result, at low metal loading <10 μM, the Tb binding to the cell surface of the LBT-strain is controlled by the presence of high-affinity, but lower capacity, LBT sites. At higher metal loadings >10 μM, a more abundant but low affinity functional group becomes the main source of adsorption that results in an overall higher sorption capacity. This work demonstrates how surface complexation modeling can be implemented for bacterial surfaces engineered with a known protein tag to optimize REE recovery from fluids with variable pH and metal loadings.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1990

SIRTF high earth orbit mission conceptual structural design and analysis

The Space Infrared Telescope Facility (SIRTF) is a cryogenically cooled, space based, one meter class telescope for infrared astronomy. A recent mission option study has moved SIRTF from a previous low earth orbit (900 km) shuttle launched design to a high earth orbit (100,000 km) Titan IV/Centaur launched design. The mission option study requirements and trades relating to the structural configuration and the chosen SIRTF design are described. Also discussed is a dynamic stress analysis of the new SIRTF baseline structural design which has been performed using finite element modeling and simulated launch interface loads.

Chang, LI↗
NASA NTRS2002

Temporal gradients in shear stimulate osteoblastic proliferation via ERK1/2 and retinoblastoma protein

Bone cells are subject to interstitial fluid flow (IFF) driven by venous pressure and mechanical loading. Rapid dynamic changes in mechanical loading cause transient gradients in IFF. The effects of pulsatile flow (temporal gradients in fluid shear) on rat UMR106 cells and rat primary osteoblastic cells were studied. Pulsatile flow induced a 95% increase in S-phase UMR106 cells compared with static controls. In contrast, ramped steady flow stimulated only a 3% increase. Similar patterns of S-phase induction were also observed in rat primary osteoblastic cells. Pulsatile flow significantly increased relative UMR106 cell number by 37 and 62% at 1.5 and 24 h, respectively. Pulsatile flow also significantly increased extracellular signal-regulated kinase (ERK1/2) phosphorylation by 418%, whereas ramped steady flow reduced ERK1/2 activation to 17% of control. Correspondingly, retinoblastoma protein was significantly phosphorylated by pulsatile fluid flow. Inhibition of mitogen-activated protein (MAP)/ERK kinase (MEK)1/2 by U0126 (a specific MEK1/2 inhibitor) reduced shear-induced ERK1/2 phosphorylation and cell proliferation. These findings suggest that temporal gradients in fluid shear stress are potent stimuli of bone cell proliferation.

NASA Discipline Cell Biology↗
DOE OSTI2016

Optimizing the CSP Tower Air Brayton Cycle System to Meet the SunShot Objectives - Final Technical Report

The objective of this project is to increase Concentrated Solar Power (CSP) tower air receiver and gas turbine temperature capabilities to 1,000ºC by the development of a novel gas turbine combustor, which can be integrated on a megawatt-scale gas turbine, such as the Solar Turbines Mercury 50™. No combustor technology currently available is compatible with the CSP application target inlet air temperature of 1,000°C. Autoignition and flashback at this temperature prevent the use of conventional lean pre-mix injectors that are currently employed to manage NOx emissions. Additional challenges are introduced by the variability of the high-temperature heat source provided by the field of solar collectors, the heliostat in CSP plants. For optimum energy generation from the power turbine, the turbine rotor inlet temperature (TRIT) should remain constant. As a result of changing heat load provided to the solar collector from the heliostat, the amount of energy input required from the combustion system must be adjusted to compensate. A novel multi-bank lean micro-mix injector has been designed and built to address the challenges of high-temperature combustion found in CSP applications. The multi-bank arrangement of the micro-mix injector selectively injects fuel to meet the heat addition requirements to maintain constant TRIT with changing solar load. To validate the design, operation, and performance of the multi-bank lean micro-mix injector, a novel combustion test facility has been designed and built at Southwest Research Institute® (SwRI®) in San Antonio, TX. This facility, located in the Turbomachinery Research Facility, provides in excess of two kilograms per second of compressed air at nearly eight bar pressure. A two-megawatt electric heater raises the inlet temperature to 800°C while a secondary gas-fired heater extends the operational temperature range of the facility to 1,000°C. A combustor test rig connected to the heater has been designed and built to test the multi-bank lean micro-mix injector over the range of CSP operating conditions. The fuel is controlled and selectively delivered to the banks of the injector based on combustor inlet conditions that correspond to turbine operating points. The combustor rig is equipped with a data acquisition system and a suite of instrumentation for measuring temperature, pressure, and species concentration. This unique test facility has been built and commissioned and a prototype of the multi-bank lean micro-mix injector design has been tested. Operation of the combustor and injector has been demonstrated over the full range of CSP inlet conditions and for the range of turbine load conditions specified. The multi-bank operation of the injector has been proven to be an effective design for managing the variable flow rates of air and fuel due to changing inlet conditions from the solar field and turbine loads.

14 SOLAR ENERGY↗
DOE OSTI2024

Dual Impacts of Space Heating Electrification and Climate Change Increase Uncertainties in Peak Load Behavior and Grid Capacity Requirements in Texas

Around 60% of households in Texas currently rely on electricity for space heating. As decarbonization efforts increase, non‐electrified households could adopt electric heat pumps, significantly increasing peak (highest) electricity demand in winter. Simultaneously, anthropogenic climate change is expected to increase temperatures, the potential for summer heat waves, and associated electricity demand for cooling. Uncertainty regarding the timing and magnitude of these concurrent changes raises questions about how they will jointly affect the seasonality of peak demand, firm capacity requirements, and grid reliability. This study investigates the net effects of residential space heating electrification and climate change on long‐term demand patterns and load shedding potential, using climate change projections, a predictive load model, and a direct current optimal power flow (DCOPF) model of the Texas grid. Results show that full electrification of residential space heating by replacing existing fossil fuel use with higher efficiency heat pumps could significantly improve reliability under hotter futures. Less efficient heat pumps may result in more severe winter peaking events and increased reliability risks. As heating electrification intensifies, system planners will need to balance the potential for greater resource adequacy risk caused by shifts in seasonal peaking behavior alongside the benefits (improved efficiency and reductions in emissions).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2012

Plug-Load Control and Behavioral Change Research in GSA Office Buildings

The U.S. General Services Administration (GSA) owns and leases over 354 million square feet (ft2) of space in over 9,600 buildings [1]. GSA is a leader among federal agencies in aggressively pursuing energy efficiency (EE) opportunities for its facilities and installing renewable energy (RE) systems to provide heating, cooling, and power to these facilities. According to several energy assessments of GSA's buildings conducted by the National Renewable Energy Laboratory (NREL), plug-loads account for approximately 21% of the total electricity consumed within a standard GSA Region 3 office building. This study aims to provide insight on how to effectively manage plug-load energy consumption and attain higher energy and cost savings for plug-loads. As GSA improves the efficiency of its building stock, plug-loads will become an even greater portion of its energy footprint.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1987

Eruptions of Pavlof Volcano and their possible modulation by ocean load and tectonic stresses

Data pertaining to the basic features (such as the volume of erupted materials and the rate of mass ejection) of the eruptions of the Pavlof Volcano, Alaska, and the accompanying seismicity were related to other geophysical data, including atmospheric pressure, earth and ocean-load tides, long-period sea level, and ground tilt. A significant correlation was found between the eruptions of the volcano and yearly nontidal variations in sea level, that possibly resulted from ocean loading; volume changes beneath the volcano due to ocean loading were calculated to be from 0.02 to 2 times eruption volumes. It is suggested that the volcano acts as a long-period volume strain meter, with lava being preferentially erupted when strain beneath the volcano is compressive. No eruptions occurred during the period of 1978-1980, when tilt, seismic data, and sea level data indicated that a deep aseismic slip may have occurred. Models of this aseismic event predict a volume increase beneath the volcano that might have compensated strain from magma injection.

Mcnutt, S. R.↗
DOE OSTI2012

Data Report on Post-Irradiation Dimensional Change of AGC-1 Samples

This report summarizes the initial dimensional changes for loaded and unloaded AGC-1 samples. The dimensional change for all samples is presented as a function of dose. The data is further presented by graphite type and applied load levels to illustrate the differences between graphite forming processes and stress levels within the graphite components. While the three different loads placed on the samples have been verified [ ref: Larry Hull’s report] verification of the AGC-1 sample temperatures and dose levels are expected in the summer of 2012. Only estimated dose and temperature values for the samples are presented in this report to allow a partial analysis of the results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Design Considerations of a Transverse Flux Machine for Direct-Drive Wind Turbine Applications

This paper presents the design considerations of a double-sided transverse flux machine (TFM) for direct-drive wind turbine applications. The TFM has a modular structure with quasi-U stator cores and ring windings. The rotor is constructed with ferrite magnets in a flux-concentrating arrangement to achieve high air gap flux density. The design considerations for this TFM with respect to initial sizing, pole number selection, key design ratios, and pole shaping are presented in this paper. Pole number selection is critical in the design process of a TFM because it affects both the torque density and power factor under fixed magnetic and changing electrical loading. Several key design ratios are introduced to facilitate the design procedure. The effect of pole shaping on back-emf and inductance is also analyzed. These investigations provide guidance toward the required design of a TFM for direct-drive applications. The analyses are carried out using analytical and three-dimensional finite element analysis. A prototype is under construction for experimental verification.

17 WIND ENERGY↗
DOE OSTI2017

A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718

An elasto-plastic polycrystal plasticity model is developed and applied to an Inconel 718 (IN718) superalloy that was produced by additive manufacturing (AM). The model takes into account the contributions of solid solution, precipitates shearing, and grain size and shape effects into the initial slip resistance. Non-Schmid effects and backstress are also included in the crystal plasticity model for activating slip. The hardening law for the critical resolved shear stress is based on the evolution of dislocation density. In using the same set of material and physical parameters, the model is compared against a suite of compression, tension, and large-strain cyclic mechanical test data applied in different AM build directions. We demonstrate that the model is capable of predicting the particularities of both monotonic and cyclic deformation to large strains of the alloy, including decreasing hardening rate during monotonic loading, the non-linear unloading upon the load reversal, the Bauschinger effect, the hardening rate change during loading in the reverse direction as well as plastic anisotropy and the concomitant microstructure evolution. It is anticipated that the general model developed here can be applied to other multiphase alloys containing precipitates.

36 MATERIALS SCIENCE↗
DOE OSTI2014

The effect of the composition of plutonium loaded on the reactivity change and the isotopic composition of fuel produced in a fast reactor

This paper presents the results of a numerical investigation into burnup and breeding of nuclides in metallic fuel consisting of a mixture of plutonium and depleted uranium in a fast reactor with sodium coolant. The feasibility of using plutonium contained in spent nuclear fuel from domestic thermal reactors and weapons-grade plutonium is discussed. It is shown that the largest production of secondary fuel and the least change in the reactivity over the reactor lifetime can be achieved when employing plutonium contained in spent nuclear fuel from a reactor of the RBMK-1000 type.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2019

Heat Storage Coupled to Generation IV Reactors for Variable Electricity from Base-load Reactors: Workshop Proceedings. Changing markets, technology, nuclear-renewables integration and synergisms with solar thermal power systems

Electricity markets are changing because of (1) the addition of wind and solar that creates volatile electricity prices including times of zero-priced electricity and (2) the goal of a low-carbon world that requires replacing fossil fuels that provide (a) energy, (b) stored energy, and (c) dispatchable energy. Wind and solar provide energy but not the other two other energy functions that are provided fossil fuels. Nuclear energy with heat storage can provide all three functions and thus replace fossil fuels.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Preliminary Engineering and Cost Analysis for DPC Disposal Solutions. Final Draft

There are currently (as of January, 2019) more than 2,700 dual-purpose canisters (DPCs) loaded with spent nuclear fuel (SNF) across the United States. DPCs continue to be loaded at a rate of more than 200 per year by mid-century there are likely to be more than 8,160 DPCs in service. Options for disposing of SNF loaded in DPCs include repackaging into specialized disposal canisters, directly disposing of the loaded DPCs (with or without modification), or some combination of the two. The main technical challenges for direct disposal of loaded DPCs are thermal management, handling and emplacement operations for the large, heavy packages, and postclosure criticality control. This report focuses on postclosure criticality control which is the most challenging. The challenge lies in determining how to modify DPCs so as to minimize the probability that a criticality event might occur in a repository, or if the DPCs are not modified, to understand the nature and consequences of postclosure criticality events. There are several approaches that could facilitate direct disposal of loaded DPCs with acceptable repository performance. This report describes these approaches and presents comparative analysis of the rough-order-of-magnitude (ROM) costs. Repackaging SNF in DPCs into specialized disposal canisters could be financially and operationally costly with additional radiological, operational safety, and management risks. A disposition approach that would not involve repackaging or modifications to DPCs (future or already loaded) is development of a new licensing strategy that addresses the risk (probability and consequence) from criticality events. A different approach would modify existing loaded DPCs (some or all of them), and change the loading or design of future DPCs, to decrease the probability of a criticality event in a repository below levels of concern. This report investigates the cost to modify existing loaded DPCs, and the cost to modify the loading or design of future DPCs to facilitate direct disposal. It establishes the ROM cost for repackaging SNF that has been loaded into DPCs, into specialized canisters for disposal. It also identifies technical and regulatory challenges associated with the potential design modifications and loading considerations. It is left to future analyses to compare radiological, operational safety, and management risks associated with the available approaches.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRSDate not supplied

Marin County Wildland Fires: Examining Fuel Load and Land Cover Change to Inform Fire Prevention and Suppression Decisions in Marin County, CA

Heightened occurrence of severe wildfires in the Western United States is increasing the need to better understand regions of high potential wild fire severity and develop methodologies for identifying the best locations for fuels reduction and active wildfire suppression, especially in populated regions such as Marin County, California. Marin County, located in the San Francisco Bay Area, has had significant development in the wildland-urban interface and periods of highly wildfire-prone conditions. The NASA DEVELOP team collaborated with Fire Foundry, a Marin-based fire service work force development program, to develop new models to assist with fire management. Using data from Sentinel-2A, Planet Scope, ECOSTRESS, a county-wide LiDAR mapping effort, Landsat 7 Enhanced Thematic Mapper (ETM+), and Landsat 8 Operational Land Imager (OLI), the team developed several input data layers to three models evaluating wild fire severity. One model performed a suitability analysis with weights based on scientific literature, another utilized machine learning based on past fires in Marin and neighboring Sonoma County to predict the difference normalized burn ratio, and the third inputted data layers into the Flam Map tool, which outputs risk categories. The team compared model outputs and, using the best-fit model, performed fuzzy logic analysis to identify specific locations where a fire break could be constructed to interrupt the progress of an active fire. These tools were proven useful and will assist partners in preparing for and managing an active wildfire event.

Suhani Dalal↗