Search NASA⌕ Search

SEARCH · Search NASA

Results for “low cost”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Low-cost solar array project progress and plans

The considered project is part of the DOE Photovoltaic Technology and Market Development Program. This program is concerned with the development and the utilization of cost-competitive photovoltaic systems. The project has the objective to develop, by 1986, the national capability to manufacture low-cost, long-life photovoltaic arrays at production rates that will realize economies of scale, and at a price of less than $0.70/watt. The array performance objectives include an efficiency greater than 10% and an operating lifetime longer than 20 years. The objective of the silicon material task is to establish the practicality of processes for producing silicon suitable for terrestrial photovoltaic applications at a price of $14/kg. The large-area sheet task is concerned with the development of process technology for sheet formation. Low-cost encapsulation material systems are being developed in connection with the encapsulation task. Another project goal is related to the development of economical process sequences.

Callaghan, W. T.↗
NASA NTRSDate not supplied

Current Status of NASA’s Low-Cost Optical Terminal (LCOT) at Goddard Space Flight Center

This paper provides the status of ongoing work at NASA-Goddard Space Flight Center (GSFC) to build a low-cost flexible ground terminal for optical communication. For laser communication to be cost-effective for future missions, a global network of flexible optical terminals must be put in place. There is a need for a single ground terminal design capable of supporting multiple missions ranging from LEO to lunar distances. NASA’s Low-Cost Optical Terminal (LCOT) has a single modular design that can be quickly reconfigured to support different laser communications missions. The LCOT prototype uses a 70cm commercially available telescope designed with optical and quantum communications in mind. This telescope is currently being integrated with a state-of-the-art adaptive optics system, and novel high-power laser amplifier demonstrate its utility as an optical communications receiver by receiving a downlink from the recently launched Laser Communication Relay Demonstration (LCRD). LCOT uses commercially available components wherever possible, and where commercial options are not available, the LCOT team works with vendors to create commercial options. This paper discusses the development progress for the blueprint of NASA’s future global ground terminal network.

Laser communications↗
NASA NTRS2014

Adapting a Large-Scale Multi-Mission Ground System for Low-Cost CubeSats

The majority of today's CubeSat fleet consists of Earth-orbiting missions that mostly use existing ground systems developed by universities because of availability, simplicity, and low-cost. The Interplanetary NanoSpacecraft Pathfinder In Relevant Environment (INSPIRE) mission is a revolutionary CubeSat mission that will launch a pair of CubeSats into deep space to study the feasibility of CubeSats beyond low-Earth orbit. This uncovers a new set of systems and software engineering challenges to the development of a robust and reliable ground system in a low-cost environment. In this paper, we discuss the approach to these challenges by using the Jet Propulsion Laboratory's (JPL) Advanced Multimission Operation System (AMMOS) Ground Data System (GDS) as well as the methodologies used to engineer the flight system to work with an existing ground system developed for large-scale missions. Specifically we will focus on the command and telemetry subsystem of AMMOS, the Multimission Data Processing and Control System. We conclude with a retrospective on the challenges encountered and a brief discussion on our efforts to provide AMMOS to support future deep space CubeSat missions.

Quach, William L.↗
NASA NTRS2018

A Low Cost Thermal Control Method for Testing in a Mars Environment

Due to the unique thermal vacuum testing requirements for a Mars Rover instrument, NASA Goddard developed a low cost, high fidelity thermal control system utilizing Thermal Electric Coolers (TECs) combined with a heat rejection fluid loop to actively control 8 independent payload thermal boundary zones in a simulated Mars pressure vacuum chamber with a Carbon Dioxide atmosphere. These zones could control instrument components to a specific temperature as a function of time to simulate exact temporal flight boundary predictions.The Mars Organic Molecule Analyzer (MOMA) instrument is a dual source (pyrolysis gas chromatograph and laser desorption) mass spectrometer (MS) based package that detects and characterizes organic molecules, as part of ESA's 2020 ExoMars Rover mission to seek the signs of life on Mars.Due to the unique thermal vacuum testing requirements for a Mars Rover instrument, NASA Goddard developed a low cost, high fidelity thermal control system utilizing Thermal Electric Coolers (TECs) combined with a heat rejection fluid loop to actively control 8 independent payload thermal boundary zones in a simulated Mars pressure vacuum chamber with a Carbon Dioxide atmosphere. These zones could control instrument components to a specific temperature as a function of time to simulate exact temporal flight boundary predictions.The Mars Organic Molecule Analyzer (MOMA) instrument is a dual source (pyrolysis gas chromatograph and laser desorption) mass spectrometer (MS) based package that detects and characterizes organic molecules, as part of ESA's 2020 ExoMars Rover mission to seek the signs of life on Mars.

MOMA↗
NASA NTRS2012

Red Dragon: Low-cost Access to the Surface of Mars using Commercial Capabilities

We will discuss the feasibility of using a minimally-modified variant of a SpaceX Dragon capsule as a low-cost, large-capacity, near-term, Mars lander for scientific and human-precursor missions. We have been evaluating such a Red Dragon platform as an option for a Discovery Program mission concept. A Red Dragon lander has the potential to be low cost primarily because it would be derived from a routinely-flying spacecraft. Dragon is being developed to ferry cargo and crew to and from the International Space Station (ISS). The cargo variant is currently undergoing test flights, which will be followed by standard ISS cargo missions and, eventually, crewed flights. The human variant, unlike other Earth-return vehicles, appears to also have most of the capabilities necessary to land on Mars. In particular, it has a set of high-thrust, throttleable, storable bi-propellant Super- Draco engines integrated directly into the capsule which are intended for launch abort and powered landings on Earth. These thrusters suggest the possibility of a parachute-free, fully-propulsive deceleration at Mars from supersonic speeds to the surface. Concepts for large, human-relevant landers (see, e.g., [1]) also often employ supersonic retro-propulsion; Red Dragon's entry, descent, and landing approach would scale to those landers. Further, SpaceX's Falcon Heavy launch vehicle, currently under development and expected to have its first flight in 2013, will be capable of sending Dragon on a trajectory to Mars. We will discuss our motivation for exploring a Red Dragon lander, the primary technical questions which determine its feasibility, and the current results of our analysis. In particular, we will examine entry, descent, and landing (EDL) in detail. We will describe the modifications to Dragon necessary for interplanetary cruise, EDL, and operations on the Martian surface.

Karcz, John↗
NASA NTRS1990

Balancing low cost with reliable operation in the rotordynamic design of the ALS Liquid Hydrogen Fuel Turbopump

The Air Force/NASA Advanced Launch System (ALS) Liquid Hydrogen Fuel Turbopump (FTP) has primary design goals of low cost and high reliability, with performance and weight having less importance. This approach is atypical compared with other rocket engine turbopump design efforts, such as on the Space Shuttle Main Engine (SSME), which emphasized high performance and low weight. Similar to the SSME turbopumps, the ALS FTP operates supercritically, which implies that stability and bearing loads strongly influence the design. In addition, the use of low cost/high reliability features in the ALS FTP such as hydrostatic bearings, relaxed seal clearances, and unshrouded turbine blades also have a negative influence on rotordynamics. This paper discusses the analysis conducted to achieve a balance between low cost and acceptable rotordynamic behavior, to ensure that the ALS FTP will operate reliably without subsynchronous instabilities or excessive bearing loads.

Greenhill, L. M.↗
NASA NTRS2021

Low Cost Access to Mars Surface using a Small Impact Lander

In order to reduce the cost of landing small payloads on Mars, a new technology is being developed: the Small High Impact Energy Landing Device concept (SHIELD). The purpose of SHIELD is to provide a low-cost option to deliver up to 6 kg of science payload to the surface of Mars. SHIELD could be launched as a hosted payload, rideshare on an EELV secondary payload adapter (ESPA), or launching from a dedicated small launch vehicle using a kick stage. The SHIELD concept can achieve low-cost access to Mars by taking advantage of a low ballistic coefficient design to decelerate safely instead of using the typically required parachutes and/or propulsion to decelerate and stabilize itself during entry, decent, and landing (EDL). Current finite element simulations suggest that SHIELD would experience an impact acceleration pulse ranging from 1000 to 2000 g’s with a duration of 8 milliseconds. The SHIELD concept payload subsystem includes a “ruggedized” small warm electronics box (WEB). The WEB houses the telecommunications, command and data handling, thermal control, electrical power, and payload subsystems while maintaining an internal operating temperature ranging between -20° to 20° C. The system is designed to survive the Martian night by utilizing electric heaters powered with solar cells during the day and secondary batteries. The WEB is designed to be impact resistant capable of surviving an impact acceleration pulse equal to or less than 2000 g’s.

Woolley, Ryan↗
NASA NTRS1991

Shuttle-C auxiliary propulsion system certification approach and low-cost evolution concepts

Shuttle-C provides NASA with a heavy-lift cargo capability that is a low-cost derivative of the current Space Shuttle. This system can deliver 80,000 to 140,000 pounds of payload to low earth orbit within 4 years of authority to proceed. Shuttle-C will share th existing Shuttle launch facilities at Kennedy Space Center (KSC). The Shuttle-C vehicle incorporates an auxiliary propulsion system (APS) which provides separation from the external tank (ET), orbit circularization, on-orbit attitude hold, and deorbit capability. The APS is derived from the Shuttle orbiter aft reaction control system (ARCS) and orbital maneuvering system (OMS) with the objective of achieving minimum life cycle cost for this expendable vehicle. The resulting APS system will be described, its plan for a minimum-cost flight certification utilizing a cold-flow test program explained, and low-cost evolution by component design modification and part substitution presented.

Harsh, M. George↗
NASA NTRS1972

Design guide for low cost standardized payloads, volume 2

Sixteen engineering approaches to low cost standardized payloads in spacecraft are presented. Standard earth observatory satellite, standard U.S. domestic communication satellite, planetary spacecraft subsystems, standard spacecraft, and cluster spacecraft are reviewed.

Source record↗
NASA NTRS1978

LSA Low-cost Solar Array project

The activities of the Low-Cost Silicon Solar Array Project during the period October through December, 1977 are reported. The LSSA Project is assigned responsibility for advancing silicon solar array technology while encouraging industry to reduce the price of arrays to a level at which photovoltaic electric power systems will be competitive with more conventional power sources early in the next decade. Set forth are the goals and plans with which the Project intends to accomplish this and the progress that was made during the quarter.

Source record↗
NASA NTRS1979

Low-cost directionally-solidified turbine blades, volume 1

A low cost process of manufacturing high stress rupture strength directionally-solidified high pressure turbine blades was successfully developed for the TFE731-3 Turbofan Engine. The basic processing parameters were established using MAR-M 247 and employing the exothermic directional-solidification process in trial castings of turbine blades. Nickel-based alloys were evaluated as directionally-solidified cast blades. A new turbine blade, disk, and associated components were then designed using previously determined material properties. Engine tests were run and the results were analyzed and compared to the originally established goals. The results showed that the stress rupture strength of exothermically heated, directionally-solidified MAR-M 247 turbine blades exceeded program objectives and that the performance and cost reduction goals were achieved.

Sink, L. W.↗
NASA NTRS1979

Low-cost inertial navigation for moderate-g missions

A low cost inertial navigation system (INS) concept is described for flight missions characterized by moderate accelerations and limited attitude variations. These missions involve general aviation aircraft, helicopters, or remotely piloted vehicles. The significance of the moderate acceleration and limited attitude is reviewed with respect to platform mechanization and instrumentation. A hybrid mechanization, partially gimballed and partially strapdown, is presented. The INS is implemented by an unbalanced two axis gimbal system and controlled by a two degree of freedom gyro. The INS provides locally level two axis acceleration information along with pitch and roll measurements. Heading information is provided by a second gyro mounted in the inner gimbal. The system error model is equivalent to that of a conventional platform with a tilt error determined by the integral of the gyro drift rate and an equivalent accelerometer type errors are also cancelled. Rapid gyro-compassing, implemented with opened gimbal control loops, and a strapdown procedure provides calibration of gyro drift rate biases.

Merhav, S.↗
NASA NTRS1978

Practical design of low-cost large space structures

The practical design of low-cost space structures involves the use of approaches that reduce the cost of the design and development effort itself. Such approaches include: (1) design with criteria arrived at rationally; (2) design for simplicity, repeatability, and modularity; (3) assembly without adjustments; (4) design for testability on the ground; (5) the attainment of structural efficiency by configuration and material choice rather than by squeezing down on the design margins; and (6) prefabrication and preassembly before launch. Attention is given to truss platform designs, and the Seasat Extendible Support Structure is discussed as a particular example.

Hedgepeth, J. M.↗
NASA NTRS1979

Low cost vee-trough evacuated tube collector module

A low cost solar collector capable of operating at 150-200 C is described. An evacuated tube receiver is combined with asymmetric vee-trough concentrators. Peak efficiencies of about 40% at 120 C and 30% at 180 C are expected. Predicted future collector cost is $70/sq m which yields an energy cost of $4.20/GJ at 120 C. During the development of the vee trough/evacuated tube collector both mathematical models to predict thermal and optical performance were developed and tests run to verify theory. The asymmetric vee trough concentrator increases the solar flux intensity for an average value of 2 for year-round performance. Optimized collector module has reflector angles of 55 deg/85 deg. The aperture plane is tilted to the latitude. The reflector is made of electropolished aluminum. The supporting frame is formed by bending sheet metal. Evacuated tube receivers are Pyrex, 15 cm diam and 2.4 m long. The module has 12 tubes on right and left sides altogether. Attainable operation at temperatures on the order of 150-200 C are suitable for absorption refrigeration and power generation via Rankine engines.

Selcuk, M. K.↗