Search NASA⌕ Search

SEARCH · Search NASA

Results for “low-pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

On the connection between mare basalts and picritic volcanic glasses

The liquid lines of descent were calculated for low-pressure equilibrium and fractional crystallization of mare basaltic liquids in order to examine the postulated link between picritic volcanic glasses and mare basalts. The models of Longhi (1977, 1982) were modified by including expressions for the armalcolite/ilmenite surface boundary and the Cr-spinel liquidus surface, average molar partition coefficients for armalcolite/liquid pairs, and new experimental data of Longhi and Pan (1987). The results indicate that, with two exceptions, mare basalts and picritic volcanic glasses are not related by simple, linear-surface crystallization processes. However, the compositions of Luna 24 ferrobasalt and Apollo 11 high-K basalts could be closely matched with the lines of liquid descent of certain green and orange picritic glasses, respectively. The calculations also show that the picritic magmas would have fractionated to produce basalts with bulk and mineral compositions similar to those of mare basalts, supporting the hypothesis that mare basalts have fractionated compositions and that the small number of observed linkages between basalts and picritic parents is a consequence of limited sampling.

Longhi, John↗

Gas chromatographic instrumentation for the analysis of aerosols and gases in Titan's atmosphere

Instrumentation presently being developed by NASA for the collection and analysis of organic gases and aerosols in Titan's atmosphere is described together with the results of the preliminary experiments. For the aerosols, stepwise pyrolysis was shown to be a suitable method for preparing complex organic material for gas chromatography (GC), and a pyrolysis-gas chromatograph was developed and successfully used to analyze a simulated Titan aerosol. Atmospheric gases will be collected by a low-pressure gas sampling system using large-volume sample loops and analyzed by GC. The results of preliminary studies using a 20 cu cm sampling system and a very sensitive metastable ionization detector showed that hydrocarbon components at the 10 ppb level can be detected. Studies are in progress on shortening the overall analysis time by improving the pyrolysis system, the gas sampling system, and the associated gas chromatograph. Further development of the gas sampling system is planned to ensure rapid collection of samples adequate for analysis by GC over the entire range of pressures to be encountered during the probe's descent.

Scattergood, T. W.↗

Coating life prediction

The investigation combines both experimental studies and numerical modeling to predict coating life in an oxidizing environment. The experimental work provides both input to and verification of two numerical models. The coatings being examined are an aluminide coating on Udimet 700 (U-700), a low-pressure plasma spray (LPPS) Ni-18Co-17Cr-24Al-0.2Y overlay coating also on U- 700, and bulk deposits of the LPPS NiCoCrAlY coating.

Nesbitt, James A.↗

Two-watt, 4-Kelvin closed cycle refrigerator performance

A 2-watt, 4-K helium refrigerator using the Gifford-McMahon/Joule Thomson cycle is described. The unit features a removable displacer cylinder and high-efficiency, low-pressure drop heat exchangers. These improvements result in a 100 percent increase in cooling power over the existing Deep Space Network system. The effects of the heat exchanger efficiency and Gifford-McMahon expander performance on refrigerator capacity are also discussed.

Britcliffe, M.↗

Exhaust-Gas Pressure and Temperature Survey of F404-GE-400 Turbofan Engine

An exhaust-gas pressure and temperature survey of the General Electric F404-GE-400 turbofan engine was conducted in the altitude test facility of the NASA Lewis Propulsion System Laboratory. Traversals by a survey rake were made across the exhaust-nozzle exit to measure the pitot pressure and total temperature. Tests were performed at Mach 0.87 and a 24,000-ft altitude and at Mach 0.30 and a 30,000-ft altitude with various power settings from intermediate to maximum afterburning. Data yielded smooth pressure and temperature profiles with maximum jet temperatures approximately 1.4 in. inside the nozzle edge and maximum jet temperatures from 1 to 3 in. inside the edge. A low-pressure region located exactly at engine center was noted. The maximum temperature encountered was 3800 R.

Walton, James T.↗

Effect of spatial inlet temperature and pressure distortion on turbofan engine stability

The effects of circumferential and radial inlet temperature distortion, circumferential pressure distortion, and combined temperature and pressure distortion on the stability of an advanced turbofan engine were investigated experimentally at simulated altitude conditions. With circumferential and radial inlet temperature distortion, a flow instability generated by the fan operating near stall caused the high-pressure compressor to surge at, or near, the same time as the fan. The effect of combined distortion was dependent on the relative location of the high-temperature and low-pressure regions; high-pressure compressor stalls occurred when the regions coincided, and fan stalls occurred with the regions separated.

Mehalic, Charles M.↗

Thermal barrier coating life-prediction model development

The program focuses on predicting the lives of two types of strain-tolerant and oxidation-resistant thermal barrier coating (TBC) systems that are produced by commercial coating suppliers to the gas turbine industry. The plasma-sprayed TBC system, composed of a low-pressure plasma-spray (LPPS) or an argon shrouded plasma-spray (ASPS) applied oxidation resistant NiCrAlY or (CoNiCrAlY) bond coating and an air-plasma-sprayed yttria partially stabilized zirconia insulative layer, is applied by both Chromalloy, Klock, and Union Carbide. The second type of TBS is applied by the electron beam-physical vapor deposition (EB-PVD) process by Temescal. The second year of the program was focused on specimen procurement, TMC system characterization, nondestructive evaluation methods, life prediction model development, and TFE731 engine testing of thermal barrier coated blades. Materials testing is approaching completion. Thermomechanical characterization of the TBC systems, with toughness, and spalling strain tests, was completed. Thermochemical testing is approximately two-thirds complete. Preliminary materials life models for the bond coating oxidation and zirconia sintering failure modes were developed. Integration of these life models with airfoil component analysis methods is in progress. Testing of high pressure turbine blades coated with the program TBS systems is in progress in a TFE731 turbofan engine. Eddy current technology feasibility was established with respect to nondestructively measuring zirconia layer thickness of a TBC system.

Strangman, T. E.↗

Preliminary investigation of inertia friction welding B2 aluminides

An attempt is made to achieve inertia friction-welding in FeAl and NiAl samples, taking into account their intermetallics' compositions, extrusion parameters, and microstructural data. The energy required for the weld is stored in a rotating flywheel mass attached to one of the two pieces to be joined; when enough energy is introduced, the flywheel is disconnected and an axial load is applied which forces the spinning piece against the stationary one, converting the energy into heat by means of friction. Due to the inherent brittleness of the aluminides, a step-load program was used in which an initial, low-pressure heat buildup increased the work pieces' ductility.

Whittenberger, J. Daniel↗

Droplet Vaporization in a Supercritical Microgravity Environment

A model is presented which describes single liquid droplet vaporization at nearly critical liquid pressures and temperatures. A modified Redlich-Kwong equation of state is used to evaluate the fugacities and liquid and vapor mole fractions at the interface under the assumption of interface equilibrium. Results obtained for different droplet sizes and conditions indicate significant differences in behavior in comparison with low-pressure quasi-steady droplet vaporization.

Curtis, E. W.↗

Performance evaluation of SPE electrolyzer for Space Station life support

An static water-vapor feed electrolyzer has been developed as a candidate for Space Station life-support oxygen generation. The five-cell electrolysis module has eliminated the need for phase separation devices, pumps, and deionizers by transporting only water vapor to the solid polymer electrolyte cells. The introduction of an innovative electrochemical hydrogen pump allows the use of low-pressure reclaimed water to generate gas pressures of up to 230 psia. The electrolyzer has been tested in a computer-controlled test stand featuring continuous, cyclic, and standby operation (including automatic shutdown with fault detection).

Erickson, A. C.↗

The effects of diffusion on population gratings and the stability of ring lasers

The effects of diffusion on the coupling between counterpropagating modes in a two-level medium are studied in the rate equation limit. It is shown that diffusion can greatly decrease saturation gratings in low-pressure gases. Among many other effects which rely on spatial hole burning, this can alter the stability of bidirectional solutions of the third-order Lamb equation model of a ring laser.

Lawandy, N. M.↗

Diffusional transport during the cyclic oxidation of gamma + beta, Ni-Cr-Al(Y, Zr) alloys

The cyclic oxidation behavior of several cast gamma + beta, Ni-Cr-Al(Y, Zr) alloys and one low-pressure plasma spraying gamma + beta, Ni-Co-Cr-Al(Y) alloy was studied. Cyclic oxidation was found to result in a decreasing Al concentration at the oxide-metal interface due to a high rate of Al consumption coupled with oxide scale cracking and spalling. Diffusion paths plotted on the ternary phase diagram showed higher Ni concentrations with increasing cyclic oxidation exposures. The alloy with the highest rate of Al consumption and the highest Al content underwent breakaway oxidation following 500 1-hr cycles at 1200 C.

Nesbitt, J. A.↗

The nature and origin of interstellar diamond

The C-delta component of the Allende meteorite is a microscopic diamond some of whose properties seem in conflict with those expected of diamond. High spatial resolution analytical data are presented here which may help explain such results. Surface and interfacial carbon atoms in the component, which may comprise as much as 25 percent of the total, impart an 'amorphous' character to some spectral data. These data support the proposed high-pressure conversion of amorphous carbon and graphite into diamonds due to grain-grain collisions in the ISM, although a low-pressure mechanism of formation cannot be ruled out.

Blake, David F.↗

Cluster-based representation of hydraulic systems

The authors present a technique for structural abstraction applicable to the domain of pressurized hydraulic systems. Valves, when closed, functionally isolate clusters of components; when opened, neighboring clusters are merged. A cluster can only be in the one of two qualitative states-stable, where pressures are equal throughout and no flow occurs, or unstable, where flow from high-pressure source(s) to low-pressure sink(s) occurs. Reasoning in terms of clusters is shown to facilitate the generation and explanation of plans for operating and troubleshooting hydraulic systems.

Farley, Arthur M.↗

Effect of spatial inlet temperature and pressure distortion on turbofan engine stability

The effects of circumferential and radial inlet temperature distortion, circumferential pressure distortion, and combined temperature and pressure distortion on the stability of an advanced turbofan engine were investigated experimentally at simulated altitude conditions. With circumferential and radial inlet temperature distortion, a flow instability generated by the fan operating near stall caused the high-pressure compressor to surge at, or near, the same time as the fan. The effect of combined distortion was dependent on the relative location of the high-temperature and low-pressure regions; high-pressure compressor stalls occurred when the regions coincided, and fan stalls occurred with the regions separated.

Mehalic, Charles M.↗

An airborne system for vortex flow visualization on the F-18 high-alpha research vehicle

A flow visualization system for the F-18 high-alpha research vehicle is described which allows direct observation of the separated vortex flows over a wide range of flight conditions. The system consists of a smoke generator system, on-board photographic and video systems, and instrumentation. In the present concept, smoke is entrained into the low-pressure vortex core, and vortice breakdown is indicated by a rapid diffusion of the smoke. The resulting pattern is observed using photographic and video images and is correlated with measured flight conditions.

Curry, Robert E.↗

Igneous proceses and closed system evolution of the Tharsis region of Mars

A quantitative petrologic model for the evolution of the Tharsis region on Mars is presented, which is consistent with global gravity and topography data. It is demonstrated that it is possible to form and support the topographic relief of the Tharsis plateau by a closed-system mass-conservative nearly isostatic process involving generation of magmas from a mantle source region. Extrusion and/or intrusion (or underplating) of such magmas allows low-pressure solidification, with a consequent increase in volume relative to that which would be possible in the high-pressure source region, leading to elevated topology. The distribution of densities with depth obtained by the model is quantitatively consistent with the isostatic models of Sleep and Phillips (1979, 1985).

Finnerty, A. A.↗

Laser/Plasma/Chemical-Vapor Deposition Of Diamond

Proposed process for deposition of diamond films includes combination of plasma induced in hydrocarbon feed gas by microwave radiation and irradiation of plasma and substrate by lasers. Deposition of graphite suppressed. Reaction chamber irradiated at wavelength favoring polymerization of CH2 radical into powders filtered out of gas. CH3 radicals, having desired sp3 configuration, remains in gas to serve as precursors for deposition. Feed gas selected to favor formation of CH3 radicals; candidates include CH4, C2H4, C2H2, and C2H6. Plasma produced by applying sufficient power at frequency of 2.45 GHz and adjusting density of gas to obtain electron kinetic energies around 100 eV in low-pressure, low-temperature regime.

Hsu, George C.↗