Search NASA⌕ Search

SEARCH · Search NASA

Results for “magnifier”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Decision rules for spaceborne operations planning

Recent study of Space Station Freedom requirements for extravehicular activity (EVA) to perform external maintenance tasks emphasize an oversubscription of resources for performing on-orbit tasks. Extravehicular robotics (EVR) and cooperative EVA combined with EVR (using crew and robots synergistically to perform tasks) have been suggested as a part of the solution to reduce EVA. The question remains however, 'Under what conditions is it cost-effective to use the EVA and/or EVR resource.' The answer to such a question also has implications for the Space Station Freedom and its external maintenance as well as the Space Exploration Initiative (SEI) where the issue of work-system allocation is magnified by the long distances and scope of EVA work. This paper describes a simple technique of interest to operational planners and robot technology planners for determining in an economic context whether to use EVA alone, EVR alone, or Cooperative EVA. It is also shown that given: (1) the task times for these alternatives; and (2) the marginal costs of EVA, EVR, and IVA, the appropriate work system for performing the task can be identified. The paper illustrates how the work system choice is based on the ratio of costs. An example using Space Station Freedom data is presented to illustrate the trade-offs among alternative work-systems.

Smith, Jeffrey H.↗
NASA NTRS1985

Weather forecasting expert system study

Weather forecasting is critical to both the Space Transportation System (STS) ground operations and the launch/landing activities at NASA Kennedy Space Center (KSC). The current launch frequency places significant demands on the USAF weather forecasters at the Cape Canaveral Forecasting Facility (CCFF), who currently provide the weather forecasting for all STS operations. As launch frequency increases, KSC's weather forecasting problems will be great magnified. The single most important problem is the shortage of highly skilled forecasting personnel. The development of forecasting expertise is difficult and requires several years of experience. Frequent personnel changes within the forecasting staff jeopardize the accumulation and retention of experience-based weather forecasting expertise. The primary purpose of this project was to assess the feasibility of using Artificial Intelligence (AI) techniques to ameliorate this shortage of experts by capturing aria incorporating the forecasting knowledge of current expert forecasters into a Weather Forecasting Expert System (WFES) which would then be made available to less experienced duty forecasters.

Source record↗
NASA NTRS1993

Powering the superwind in NGC 253

NGC 253 is a prototypical moderate nuclear starburst galaxy. It is a barred SBc spiral galaxy at a distance of approximately 3 Mpc and can be studied on scales down to 15 pc in the optical and near IR. It is a bright IRAS source with a flux of 1000 Jy at 60 microns and a FIR luminosity of 3 x 10(exp 10) solar luminosity. It has a strong Br(gamma) emission line, a signature of ongoing massive star formation and deep CO absorption bands, which are indicative of the dominance of red supergiants in the near IR. It contains a population of compact radio sources, similar to those seen in M82. Optical spectra show that the nucleus is heavily reddened, with a Balmer decrement of approximately 30. NGC 253 possesses a 'superwind,' seen both in x-ray emission and in optical line emission. Nuclear ejection was first suggested to explain the kinematics of the nuclear region. We have obtained J, H, and K images of the entire galaxy at 1.3 arcsec/pixel (18 pc/pixel) using the superconducting quantum interference device (SQUID) on the KPNO 1.3 m. We have constructed a mosaic of 180 s exposures which traces the galaxy over much of its optical extent. The data were shifted, rotated, magnified, and calibrated following normal practice.

Watson, Alan↗
NASA NTRS1993

Application of hardness testing in foundry processing operations: A university and industry partnership

The objectives are the following: (1) to plan a tour of local manufacturing facility to observe hardness testing methods used and how they support the manufacturing process today; (2) to learn the operation of Brinell Hardness Testing and equipment set up with samples of accessory equipment for testing of various materials; (3) to use a Brinell scope (hand magnifier) to measure the diameter of the test indentation (in millimeters); (4) to use the hardness equation to determine the spherical area of the indentation and the calculation of the Brinell Hardness Number; (5) to use standard charts for ASTM standard size indenters to find the hardness number; and (6) to learn a method of conversion of the Brinell number to other hardness scales, their common usage, and also to convert the hardness number to the approximate tensile strength.

Martin, Donald H.↗
NASA NTRS1992

Telerobotic field geologist - Preliminary results of a feasibility study

Results of three laboratory studies conducted to explore the feasibility of developing a telerobot to perform planetary field geology are presented. A total of 72 college students attempted to match each of 15 geologic rock samples viewed either directly or on a TV screen with its matched pair contained in a matrix of 24 rocks which they viewed directly. The first study showed that rocks viewed on TV could be matched at levels well above chance, but significantly less than by direct view. Performance under remote view was improved by adding color and by magnifying the TV image. The second study showed a large decrease in performance when viewing a miniature LCK monitor as compared to a 19-in. CRT monitor of higher resolution. In the third study performance using the 2.9-in. LCK monitor showed only insignificant increases when images were presented in 3D view or when the rock was moved. It is suggested that it is feasible to conduct geologic observations with telerobots, and the critical role that image quality plays in determining performance is demonstrated.

Cole, Robert E.↗
NASA NTRS1993

Statistics of arcs in clusters of galaxies

Samples of gravitational lens events in clusters show many large arcs compared to arclets, relative to what can be obtained by idealized singular lens models. We describe the probability of image magnification for point sources and for simple but more realistic gravitational lensing models that include a finite core size and an ellipticity. In addition, we explore the changes in the probability distribution of image magnifications, distortions, and angular extents for sources of different sizes as the parameters of the lenses are varied. A finite core in spherically symmetric lens models introduces a discontinuity in the probability distribution at which the relative number of highly magnified images is increased. In elliptical lenses, this discontinuity and its effect are replaced by a continuous increase in the probability of obtaining high-magnification images relative to singular spherically symmetric models. We also find that the finite size of the source causes a further increase in the expected number of images just below the maximum possible magnification.

Bergmann, Anton G.↗
NASA NTRS1932

Preliminary Photomicrographic Studies of Fuel Sprays

Photomicrographs were taken of fuel sprays injected into air at various densities for the purpose of studying the spray structure and the stages in the atomization of the fuel. The photomicrographs were taken at magnifying powers of 2.5, 3.25, and 10, using a spark discharge of very short duration for illumination. The results indicate that the theory advanced by Dr. R. A. Castleman, Jr., on the atomization of fuel in carburetors may also be applied to the atomization of fuel sprays of the solid-injection type. The fuel leaves the nozzle as a solid column, is ruffled and then torn into small, irregular ligaments by the action of the air. These ligaments are then quickly broken up into drops by the surface tension of the fuel. The photomicrographs also show that the dispersion of a fuel spray at a given distance from the nozzle increases with an increase in the jet velocity or an increase in the air density. The first portions of fuel sprays injected from an automatic injection valve into air at atmospheric density have a much greater dispersion than the later portions, but this difference decreases rapidly as the air density is increased.

Lee, Dana W↗
NASA NTRS1942

Design of Tools for Press-countersinking or Dimpling 0.040-inch-thick-24S-T Sheet

A set of dimpling tools was designed for 0.040-inch 24S-T sheet and flush-type rivets 1/8 inch in diameter with 100 degree countersunk heads. The dimples produced under different conditions of pressure, sheet thickness, and drill diameter are presented as cross-sectional photographs magnified 20 times. The most satisfactory values for the dimpling tools were found to be: maximum punch diameter, 0.231 inch; maximum die diameter, 0.223 inch; maximum mandrel diameter, 0.128 inch; dimple angle, 100 degree; punch springback angle, 1 1/2 degree; and die springback angle, 2 degree.

Templin, R L↗
NASA NTRS1934

Photomicrographic Studies of Fuel Sprays

A large number of photomicrographs of fuel sprays were taken for the purpose of studying the spray structure and the process of spray formation. They were taken at magnifying powers of 2.5, 3.25, and 10, using a spark discharge of very short duration for illumination. Several types and sizes of nozzles were investigated, different liquids were used, and a wide range of injection pressures was employed. The sprays were photographed as they were injected into a glass-walled chamber in which the air density was varied from 14 atmospheres to 0.0013 atmosphere.

Lee, Dana W↗
NASA NTRS1938

Wind-tunnel Investigations on Flexural-torsional Wing Flutter

For the purpose of testing the theory of an oscillating airfoil of two degrees of freedom, a wing was mounted in the wind tunnel between two walls in such a manner that it could execute vertical (flexural) oscillations as well as torsional oscillations about an arbitrary axis parallel to the span. It was possible to vary the inertia and elasticity parameters and also to increase artificially the negligibly small natural damping of the system. The oscillations were recorded to a strongly magnified scale. The experimentally determined critical (or flutter) velocities fully agree with the theoretical ones of Wagner and Kussner within the limits of computational and measuring accuracy. An extremely narrow wing without end walls (three dimensional problem) showed the same oscillations as one with end walls (two-dimensional problem).

Voigt, H↗
NASA NTRS1993

Effects of solar cell environment on contact integrity

The III-V semiconductors react extremely rapidly with most commonly used contact metallizations. This precludes the use of elevated temperatures in the contact formation process for solar cells and other shallow junction devices. These devices must rely upon contact metallizations that are sufficiently conductive in their 'as-fabricated' state. However, while there are a number of non-sintered metallizations that have acceptable characteristics, the lack of a sintering step makes them vulnerable to a variety of environmentally induced degradation processes. The degrading effects resulting from the exposure of unsintered devices to a humid environment and to a vacuum (space) environment are described. It is shown, further, that these effects are magnified by the presence of mechanical damage in the contact metallization. The means to avoid or prevent these degrading interactions are presented.

Weizer, Victor G.↗
NASA NTRS1993

Geostationary payload concepts for personal satellite communications

This paper reviews candidate satellite payload architectures for systems providing world-wide communication services to mobile users equipped with hand-held terminals based on large geostationary satellites. There are a number of problems related to the payload architecture, on-board routing and beamforming, and the design of the S-band Tx and L-band Rx antenna and front ends. A number of solutions are outlined, based on trade-offs with respect to the most significant performance parameters such as capacity, G/T, flexibility of routing traffic to beams and re-configuration of the spot-beam coverage, and payload mass and power. Candidate antenna and front-end configurations were studied, in particular direct radiating arrays, arrays magnified by a reflector and active focused reflectors with overlapping feed clusters for both transmit (multimax) and receive (beam synthesis). Regarding the on-board routing and beamforming sub-systems, analog techniques based on banks of SAW filters, FET or CMOS switches and cross-bar fixed and variable beamforming are compared with a hybrid analog/digital approach based on Chirp Fourier Transform (CFT) demultiplexer combined with digital beamforming or a fully digital processor implementation, also based on CFT demultiplexing.

Benedicto, J.↗
NASA NTRS1994

Controlling telerobots with video data and compensating for time-delayed video using Omniview

Remote viewing is critical for teleoperations, but the inherent limitations of standard video reduce the operator's effectiveness. These limitations have been compensated for in many ways, from using the operator's adaptability, to augmenting his capability with feedback from a variety of sensors and simulations. Omniview can overcome some of these limitations and improve the operator's efficiency without adding additional sensors or computational burden. It can minimize the potential collisions with facility equipment, provide peripheral vision, and display multiple images simultaneously from a single input device. The Omniview technology provides electronic pan, tilt, magnify, and rotational orientation within a hemispherical field-of-view without any moving parts. Image sizes, viewing directions, scale, offset, etc., may be adjusted to fit operator needs. This paper discusses the derivation of the image transformation, the design of the electronics, and two applications to telepresence that are under development. These are Video Emulated Tweening (VET), and Manipulator Guidance and Positioning (ManGAP). The VET effort uses Omniview to compensate for time-delayed video in teleoperation of remote vehicles. In ManGAP two Omniview systems are used to provide two sets of orientation vectors to points in the field-of-view (FOV). These vectors then provide absolute position information to both control the position of the telerobot, and to avoid collisions with the work sight equipment.

Kuban, Dan↗
NASA NTRS1994

Apparatus for performing high-temperature fiber push-out testing

The apparatus disclosed in the present invention measures the force at which a fiber resist the motion of an indenter driven at constant speed. This apparatus conducts these test in a vacuum of about 10(exp -6) tort and at temperatures up to 1100 C. Temperature and vacuum environment are maintained while controlling indenter motion, sample position, and providing magnified visual inspection during the test.

Eldridge, Jeffrey I.↗
NASA NTRS1994

Symmetry breaking in O4(+): An application of the Brueckner coupled-cluster method

A recent calculation of the antisymmetric stretch frequency for the rectangular structure of quartet O4(+) using the singles and doubles quadratic configuration interaction method with a perturbational estimate of connected triple excitations (QCISD(T)) method gave a value of 3710 cm(exp -1). This anomalous frequency is shown to be a consequence of symmetry breaking effects, which occur even though the QCISD(T) solution derived from a delocalized SCF reference function lies energetically well below the two localized (symmetry-broken) solutions at the equilibrium geometry. The symmetry breaking is almost eliminated at the CCSD level of theory, but the small remaining symmetry breaking effects are magnified at the CCSD(T) level of theory so that the antisymmetric stretch frequency is still significantly in error. The use of the Brueckner coupled cluster method, however, leads to a symmetrical solution which is free of symmetry breaking effects, with an antisymmetric stretch frequency of 1322 cm(exp -1), in good agreement with our earlier calculations using the complete active space self consistent field/complete active space state interaction (CASSCF/CASSI) method.

Barnes, Leslie A.↗
NASA NTRS1995

A crew-centered flight deck design philosophy for High-Speed Civil Transport (HSCT) aircraft

Past flight deck design practices used within the U.S. commercial transport aircraft industry have been highly successful in producing safe and efficient aircraft. However, recent advances in automation have changed the way pilots operate aircraft, and these changes make it necessary to reconsider overall flight deck design. The High Speed Civil Transport (HSCT) mission will likely add new information requirements, such as those for sonic boom management and supersonic/subsonic speed management. Consequently, whether one is concerned with the design of the HSCT, or a next generation subsonic aircraft that will include technological leaps in automated systems, basic issues in human usability of complex systems will be magnified. These concerns must be addressed, in part, with an explicit, written design philosophy focusing on human performance and systems operability in the context of the overall flight crew/flight deck system (i.e., a crew-centered philosophy). This document provides such a philosophy, expressed as a set of guiding design principles, and accompanied by information that will help focus attention on flight crew issues earlier and iteratively within the design process. This document is part 1 of a two-part set.

Palmer, Michael T.↗
NASA NTRS1995

Algorithms for parallel flow solvers on message passing architectures

The purpose of this project has been to identify and test suitable technologies for implementation of fluid flow solvers -- possibly coupled with structures and heat equation solvers -- on MIMD parallel computers. In the course of this investigation much attention has been paid to efficient domain decomposition strategies for ADI-type algorithms. Multi-partitioning derives its efficiency from the assignment of several blocks of grid points to each processor in the parallel computer. A coarse-grain parallelism is obtained, and a near-perfect load balance results. In uni-partitioning every processor receives responsibility for exactly one block of grid points instead of several. This necessitates fine-grain pipelined program execution in order to obtain a reasonable load balance. Although fine-grain parallelism is less desirable on many systems, especially high-latency networks of workstations, uni-partition methods are still in wide use in production codes for flow problems. Consequently, it remains important to achieve good efficiency with this technique that has essentially been superseded by multi-partitioning for parallel ADI-type algorithms. Another reason for the concentration on improving the performance of pipeline methods is their applicability in other types of flow solver kernels with stronger implied data dependence. Analytical expressions can be derived for the size of the dynamic load imbalance incurred in traditional pipelines. From these it can be determined what is the optimal first-processor retardation that leads to the shortest total completion time for the pipeline process. Theoretical predictions of pipeline performance with and without optimization match experimental observations on the iPSC/860 very well. Analysis of pipeline performance also highlights the effect of uncareful grid partitioning in flow solvers that employ pipeline algorithms. If grid blocks at boundaries are not at least as large in the wall-normal direction as those immediately adjacent to them, then the first processor in the pipeline will receive a computational load that is less than that of subsequent processors, magnifying the pipeline slowdown effect. Extra compensation is needed for grid boundary effects, even if all grid blocks are equally sized.

Vanderwijngaart, Rob F.↗
NASA NTRS1994

Dynamic modeling of orographically induced precipitation

Local orography governs the triggering of cloud formation and the enhancement of processes such as condensation and hydrometeor nucleation and growth in mountainous regions. Intense, lengthy precipitation events are typical upwind of the topographic divide, with sharply decreasing magnitude and duration on the lee side. Differences in mean annual precipitation of several hundred percent between windward slopes of orographic barriers and adjacent valleys or lee side slopes are not unusual. Because much of the streamflow in areas such as the western United States is derived from mountainous areas that are remote and often poorly instrumented, modeling of orographic precipitation has important implications for water resources management. Models of orographically induced precipitation differ by their treatment of atmospheric dynamics and by the extent to which they rely on bulk parameterization of cloud and precipitation physics. Adiabatic ascent and a direct proportionality between efficiency and orographically magnified updrafts are the most frequent assumptions in orographic precipitation modeling. Space-time discretization (i.e., resolution) is a major issue because of the high spatial variability of orographic precipitation. For a specific storm, relative errors as large as 50 to 100% are common in the forecast/hindcast of precipitation intensity and can be even larger in the case of catastrophic storms. When monthly or seasonal timescales are used to evaluate model performance, the magnitude of such errors decreases dramatically, reaching values as low as 10 to 15%. Current research is focusing on the development of data assimilation techniques to incorporate radar and satellite observations, and on the development of aggregation and disaggregation methodologies to address the implications of modeling a multiscale problem at restricted spatial and temporal resolutions.

Barros, Ana Paula↗