Search NASA⌕ Search

SEARCH · Search NASA

Results for “maximum entropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Echo mapping of broad H-beta emission in NGC 5548

A one-dimensional echo map of the broad H-beta emission-line region in the Seyfert 1 galaxy NGC 5548 is reconstructed by using a maximum entropy technique to model the variable optical continuum and integrated H-beta emission-line fluxes observed during the 1989-1990 monitoring campaign as reported by Peterson et al. (1991). The echo map has a strong peak at a time delay of 20 lt-days which has an unresolved full width of 20 days at half-maximum. The H-beta response at time delay zero is less than one-third of that at 20 days, implying a deficit of H-beta-emitting gas near the line of sight to the continuum source. This rules out spherically symmetric and edge-on disk geometries for isotropically emitting H-beta clouds.

Horne, Keith↗

Phase transformation of Ca{sub 4}[Al{sub 6}O{sub 12}]SO{sub 4} and its disordered crystal structure at 1073 K

The phase transformation of Ca{sub 4}[Al{sub 6}O{sub 12}]SO{sub 4} and the crystal structure of its high-temperature phase were investigated by differential thermal analysis, temperature-dependent Raman spectroscopy and high-temperature X-ray powder diffraction (CuKα{sub 1}). We determined the starting temperature of the orthorhombic-to-cubic transformation during heating (=711 K) and that of the reverse transformation during cooling (=742 K). The thermal hysteresis was negative (=−31 K), suggesting the thermoelasticity of the transformation. The space group of the high temperature phase is I4{sup ¯}3m with the unit-cell dimensions of a=0.92426(2) nm and V=0.78955(2) nm{sup 3} (Z=2) at 1073 K. The initial structural model was derived by the direct methods and further refined by the Rietveld method. The final structural model showed the orientational disordering of SO{sub 4} tetrahedra. The maximum-entropy method-based pattern fitting method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. At around the transformation temperature during heating, the vibrational spectra, corresponding to the Raman-active SO{sub 4} internal stretching mode, showed the continuous and gradual change in the slope of full width at half maximum versus temperature curve. This strongly suggests that the orthorhombic-to-cubic phase transformation would be principally accompanied by the statistical disordering in orientation of the SO{sub 4} tetrahedra, without distinct dynamical reorientation. - Graphical abstract: (Left) Three-dimensional electron-density distributions of the SO{sub 4} tetrahedron with the split-atom model, and (right) a bird's eye view of electron densities on the plane parallel to (111). - Highlights: • Crystal structure of Ca{sub 4}[Al{sub 6}O{sub 12}]SO{sub 4} at 1073 K is determined by powder XRD. • The atom arrangements are represented by the split-atom model. • The MPF method is used to confirm the validity of the model. • The phase transition is accompanied by orientational disordering of SO{sub 4} tetrahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MEM application to IRAS CPC images

A method for applying the Maximum Entropy Method (MEM) to Chopped Photometric Channel (CPC) IRAS additional observations is illustrated. The original CPC data suffered from problems with repeatability which MEM is able to cope with by use of a noise image, produced from the results of separate data scans of objects. The process produces images of small areas of sky with circular Gaussian beams of approximately 30 in. full width half maximum resolution at 50 and 100 microns. Comparison is made to previous reconstructions made in the far-infrared as well as morphologies of objects at other wavelengths. Some projects with this dataset are discussed.

Marston, A. P.↗

On Bayesian Inductive Inference & Predictive Estimation

We investigate Bayesian inference and the Principle of Maximum Entropy (PME) as methods for doing inference under uncertainty. This investigation is primarily through concrete examples that have been previously investigated in the literature. We find that it is possible to do Bayesian inference and PME inference using the same information, despite claims to the contrary, but that the results are not directly comparable. This is because Bayesian inference yields a probability density function (pdf) over the unknown model parameters, whereas PME yields point estimates. If mean estimates are extracted from the Bayesian pdfs, the resulting parameter estimates can differ radically from the PME values and also from the Maximum Likelihood values. We conclude that these differences are due to the Bayesian inference not assuming anything beyond the given prior probabilities and the data, whereas PME implicitly assumes that the given constraints are the only constraints that are operating. Since this assumption can be wrong, PME values may have to be revised when subsequent data shows evidence for more constraints. The entropy concentration previously "proved" by E. T. Jaynes is shown to be in error. Further, we show that PME is a generalized form of independence assumption, and so can be a very powerful method of inference when the variables being investigated are largely independent of each other.

Cheeseman, Peter↗

Multivariate quadrature for representing cloud condensation nuclei activity of aerosol populations

Here, sparse representations of atmospheric aerosols are needed for efficient regional- and global-scale chemical transport models. Here we introduce a new framework for representing aerosol distributions, based on the quadrature method of moments. Given a set of moment constraints, we show how linear programming, combined with an entropy-inspired cost function, can be used to construct optimized quadrature representations of aerosol distributions. The sparse representations derived from this approach accurately reproduce cloud condensation nuclei (CCN) activity for realistically complex distributions simulated by a particleresolved model. Additionally, the linear programming techniques described in this study can be used to bound key aerosol properties, such as the number concentration of CCN. Unlike the commonly used sparse representations, such as modal and sectional schemes, the maximum-entropy approach described here is not constrained to pre-determined size bins or assumed distribution shapes. This study is a first step toward a particle-based aerosol scheme that will track multivariate aerosol distributions with sufficient computational efficiency for large-scale simulations.

54 ENVIRONMENTAL SCIENCES↗

Measures of spatial entanglement in a two-electron model atom

Different entropies which can characterize the inseparable quantum correlation in a two-electron entangled artificial atom proposed by Moshinsky are analyzed. The analysis is based on an exact representation for the trace of the q-order one-body reduced density matrix in terms of the interparticle coupling. The entanglement spectrum of the model system and the possible role of the entropy-maximum concept to practical applications of matrices are discussed as well. The ground-state energy, readily obtained from the Schroedinger Hamiltonian, is recalculated within a density-matrix-functional representation for its components.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Entropy-based closure for probabilistic learning on manifolds

In a recent paper, the authors proposed a general methodology for probabilistic learning on manifolds. The method was used to generate numerical samples that are statistically consistent with an existing dataset construed as a realization from a non-Gaussian random vector. The manifold structure is learned using diffusion manifolds and the statistical sample generation is accomplished using a projected Itˆo stochastic differential equation. This probabilistic learning approach has been extended to polynomial chaos representation of databases on manifolds and to probabilistic nonconvex constrained optimization with a fixed budget of function evaluations. The methodology introduces an isotropic-diffusion kernel with hyperparameter ". Currently, " is more or less arbitrarily chosen. In this paper, we propose a selection criterion for identifying an optimal value of ", based on a maximum entropy argument. The result is a comprehensive, closed, probabilistic model for characterizing data sets with hidden constraints. This entropy argument ensures that out of all possible models, this is the one that is the most uncertain beyond any specified constraints, which is selected. Applications are presented for several databases.

97 MATHEMATICS AND COMPUTING↗

Phase transition and entropy inequality of noncommutative black holes in a new extended phase space

We analyze the thermodynamics of the noncommutative high-dimensional Schwarzschild-Tangherlini AdS black hole with the non-Gaussian smeared matter distribution by regarding a noncommutative parameter as an independent thermodynamic variable named as the noncommutative pressure . In the new extended phase space that includes this noncommutative pressure and its conjugate variable, we reveal that the noncommutative pressure and the original thermodynamic pressure related to the negative cosmological constant make the opposite effects in the phase transition of the noncommutative black hole, i.e. the former dominates the UV regime while the latter does the IR regime, respectively. In addition, by means of the reverse isoperimetric inequality, we indicate that only the black hole with the Gaussian smeared matter distribution holds the maximum entropy for a given thermodynamic volume among the noncommutative black holes with various matter distributions.

79 ASTRONOMY AND ASTROPHYSICS↗

Bayesian image reconstruction - The pixon and optimal image modeling

In this paper we describe the optimal image model, maximum residual likelihood method (OptMRL) for image reconstruction. OptMRL is a Bayesian image reconstruction technique for removing point-spread function blurring. OptMRL uses both a goodness-of-fit criterion (GOF) and an 'image prior', i.e., a function which quantifies the a priori probability of the image. Unlike standard maximum entropy methods, which typically reconstruct the image on the data pixel grid, OptMRL varies the image model in order to find the optimal functional basis with which to represent the image. We show how an optimal basis for image representation can be selected and in doing so, develop the concept of the 'pixon' which is a generalized image cell from which this basis is constructed. By allowing both the image and the image representation to be variable, the OptMRL method greatly increases the volume of solution space over which the image is optimized. Hence the likelihood of the final reconstructed image is greatly increased. For the goodness-of-fit criterion, OptMRL uses the maximum residual likelihood probability distribution introduced previously by Pina and Puetter (1992). This GOF probability distribution, which is based on the spatial autocorrelation of the residuals, has the advantage that it ensures spatially uncorrelated image reconstruction residuals.

Pina, R. K.↗

Experimental investigation on multiscale hydrodynamics in a novel gas–Liquid–Solid three phase jet-Loop reactor

Multiphase flow hydrodynamics in a novel gas–liquid–solid jet-loop reactor (JLR) were experimentally investigated at the macroscales and mesoscales. The chord length distribution was measured by an optical fiber probe and transformed for bubble size distribution through the maximum entropy method. The impacts of key operating conditions (superficial gas and liquid velocity, solid loading) on hydrodynamics at different axial and radial locations were comprehensively investigated. JLR was found to have good solid suspension ability owing to the internal circulation of bubbles and liquid flow. The gas holdup, axial liquid velocity, and bubble velocity increase with gas velocity, while liquid velocity has little influence on them. Compared with the gas–liquid JLRs, solids decrease the gas holdup and liquid circulation, reduces the bubble velocity and delays the flow development due to the enhanced interaction between bubbles and particles (Stokes number >1). This work also provides a benchmark data for computational fluid dynamics (CFD) model validation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constrained Extrapolation Problem and Order-Dependent Mappings

In this work, we consider the problem of extrapolating the perturbation series for the dilute Fermi gas in three dimensions to the unitary limit of infinite scattering length and into the BEC region, using the available strong-coupling information to constrain the extrapolation problem. In this constrained extrapolation problem (CEP) the goal is to find classes of approximants that give well converged results already for low perturbative truncation orders. First, we show that standard Padé and Borel methods are too restrictive to give satisfactory results for this CEP. A generalization of Borel extrapolation is given by the so-called Maximum Entropy extrapolation method (MaxEnt). However, we show that MaxEnt requires extensive elaborations to be applicable to the dilute Fermi gas and is thus not practical for the CEP in this case. Instead, we propose order-dependent-mapping extrapolation (ODME) as a simple, practical, and general method for the CEP. Here, we find that the ODME approximants for the ground-state energy of the dilute Fermi gas are robust with respect to changes of the mapping choice and agree with results from quantum Monte Carlo simulations within uncertainties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Droplet size distributions in turbulent clouds: experimental evaluation of theoretical distributions

Precipitation efficiency and optical properties of clouds, both central to determining Earth's weather and climate, depend on the size distribution of cloud particles. Here in this paper, theoretical expressions for cloud droplet size distribution shape are evaluated using measurements from controlled experiments in a convective-cloud chamber. The experiments are a unique opportunity to constrain theory because they are in steady-state and because the initial and boundary conditions are well characterized compared to typical atmospheric measurements. Three theoretical distributions obtained from a Langevin drift-diffusion approach to cloud formation via stochastic condensation are tested: (a) stochastic condensation with a constant removal time-scale; (b) stochastic condensation with a size-dependent removal time-scale; (c) droplet growth in a fixed supersaturation condition and with size-dependent removal. In addition, a similar Weibull distribution that can be obtained from the drift-diffusion approach, as well as from mechanism-independent probabilistic arguments (e.g., maximum entropy), is tested as a fourth hypothesis. Statistical techniques such as the χ2 test, sum of squared errors of prediction, and residual analysis are employed to judge relative success or failure of the theoretical distributions to describe the experimental data. An extensive set of cloud droplet size distributions are measured under different aerosol injection rates. Five different aerosol injection rates are run both for size-selected aerosol particles, and six aerosol injection rates are run for broad-distribution, polydisperse aerosol particles. In relative comparison, the most favourable comparison to the measurements is the expression for stochastic condensation with size-dependent droplet removal rate. However, even this optimal distribution breaks down for broad aerosol size distributions, primarily due to deviations from the measured large-droplet tail. Lastly, a possible explanation for the deviation is the Ostwald ripening effect coupled with deactivation/activation in polluted cloud conditions.

54 ENVIRONMENTAL SCIENCES↗

Finite deformation cohesive polygonal finite elements for modeling pervasive fracture

In this work, we introduce a framework for modeling dynamic fracture problems using cohesive polygonal finite elements. Random polygonal meshes provide a robust, efficient method for generating an unbiased network of fracture surfaces. Further, these meshes have more facets per element than standard triangle or quadrilateral meshes, providing more possible facets per element to insert cohesive surfaces. This property of polygonal meshes is advantageous for the modeling of pervasive fracture. We use both Wachspress and maximum entropy shape functions to form a finite element basis over the polygons. Fracture surfaces are captured through dynamically inserted cohesive zone elements at facets between the polygons in the mesh. Contact is enforced through a penalty method that is applied to both closed cohesive surfaces and general interpenetration of two polygonal elements. Finally, several numerical examples are presented that illustrate the capabilities of the method and demonstrate convergence of solutions.

97 MATHEMATICS AND COMPUTING↗

Sensitivity Gains, Linearity, and Spectral Reproducibility in Nonuniformly Sampled Multidimensional MAS NMR Spectra of High Dynamic Range.

Recently, we have demonstrated that considerable inherent sensitivity gains are attained in MAS NMR spectra acquired by nonuniform sampling (NUS) and introduced maximum entropy interpolation (MINT) processing that assures the linearity of transformation between the time and frequency domains. In this report, we examine the utility of the NUS/MINT approach in multidimensional datasets possessing high dynamic range, such as homonuclear 13C–13C correlation spectra. We demonstrate on model compounds and on 1–73-(U-13C,15N)/74–108-(U-15N) E. coli thioredoxin reassembly, that with appropriately constructed 50 % NUS schedules inherent sensitivity gains of 1.7–2.1-fold are readily reached in such datasets. We show that both linearity and line width are retained under these experimental conditions throughout the entire dynamic range of the signals. Furthermore, we demonstrate that the reproducibility of the peak intensities is excellent in the NUS/MINT approach when experiments are repeated multiple times and identical experimental and processing conditions are employed. Finally, we discuss the principles for design and implementation of random exponentially biased NUS sampling schedules for homonuclear 13C–13C MAS correlation experiments that yield high quality artifact-free datasets.

Environmental Molecular Sciences Laboratory↗

Effect of Fe Substitution on the Physical Properties of La{sub 0.62}Er{sub 0.05}Ba{sub 0.33}Mn{sub 1−x}Fe{sub x}O{sub 3}(x = 0.00, 0.05 and 0.15)

Morphology, magnetic and magnetocaloric properties of La{sub 0.62}Er{sub 0.05}Ba{sub 0.33}Mn{sub 1−x}Fe{sub x}O{sub 3}(x = 0.00, 0.05 and 0.15) were experimentally investigated. Solid-state reaction method was used in the preparation of the samples. The microstructure of the samples was determined by scanning electron microscopy (SEM). From the XRD study, it has been found that all samples are single-phased and crystallized in the rhombohedral structure with the R3-c space group. For x = 0.05 and 0.15, a steep drop of zero field-cooled (ZFC) magnetization at low temperature signifies the formation of cluster- or spin-glass state. This is caused by the competition between the ferromagnetic and antiferromagnetic interaction. A sensitive response to substituting Fe for Mn is observed in the magnetic and magnetocaloric properties. We found that Fe doping is powerful enough to reduce Curie temperature T{sub C} and it brings about cluster glass behaviours. The magnetocaloric effect is calculated from the measurement of initial isothermal magnetization versus magnetic field at various temperatures. The maximum entropy change |ΔS{sub M}{sup max}| reaches the highest values of 3.31, 3.12, and 2.57 J/kg K in magnetic field. However, the relative cooling power decreases with Fe content from x = 227.44 to 188.68 J/kg for x = 0.00 to x = 0.15 compositions, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural, Magnetic, Magnetocaloric, and Electrical Properties of Ni{sub 0.4}Mg{sub 0.3}Cu{sub 0.3}Fe{sub 2}O{sub 4} Ferrite Prepared Using Sol–Gel Method

Detailed investigations of the microstructural, magnetic, magnetocaloric, and electrical properties of Ni{sub 0.4}Mg{sub 0.3}Cu{sub 0.3}Fe{sub 2}O{sub 4} ferrite synthesized by sol-gel method have been investigated. XRD pattern indicates that sample has cubic spinel structure with Fd 3-bar m symmetry. The cation distribution of the sample has been determined by Rietveld refinement. Temperature dependence of magnetization shows that sample exhibits a second-order PM to FM phase transition at the Curie temperature T{sub C} = 690 K. From the M(μ{sub 0}H,T) data, we found that the maximum entropy change |ΔS{sub M}{sup max}| reaches value of about 1.56 J kg{sup − 1} K{sup − 1} and relative cooling power (RCP) of 136 J kg{sup − 1} at μ{sub 0}H = 5 T. From electrical conductivity curves, the estimated value of the activation energy is equal to 0.349 eV. The Nequist diagram at different temperatures reveals that the grain boundary contribution is responsible to the conduction process for the studied sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Martensitic Transformation and Magnetocaloric Effect in High-Pressure Synthesized Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} Alloys

The polycrystalline Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} ferromagnetic alloy was synthesized by high-pressure method. The Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} ribbons were prepared by melt-spinning; then, the ribbons were pressed to the bulk samples under the 6-GPa high-pressure and heated to 1173 K for 30 min. The surface morphology, phase transition, and magnetocaloric effect (MCE) were investigated in the Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample. Structural analysis and magnetic measurements studies of the bulk samples revealed the martensitic transformation at room temperature with a low thermal hysteresis of magnetization, and the nanocrystalline was observed by atomic force microscope measurements. The Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample exhibits the directionality, and the magnetic properties have the large magnetization and low coercivity when the sample direction of the applied pressure was perpendicular to the direction of the applied magnetic field. The maximum entropy changes (∆S{sub M}) of − 4.8 J/kg K have been obtained at 330 K under the field of 30 kOe in the Ni{sub 53}Mn{sub 23.5}Ga{sub 23.5} bulk sample.

36 MATERIALS SCIENCE↗