Search NASA⌕ Search

SEARCH · Search NASA

Results for “mechanical springs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Aeroelastic instability stoppers for wind tunnel models

A mechanism for constraining models or sections thereof, was wind tunnel tested, deployed at the onset of aeroelastic instability, to forestall destructive vibrations in the model is described. The mechanism includes a pair of arms pivoted to the tunnel wall and straddling the model. Rollers on the ends of the arms contact the model, and are pulled together against the model by a spring stretched between the arms. An actuator mechanism swings the arms into place and back as desired.

Doggett, R. V., Jr.↗
NASA NTRS1978

Flow compensating pressure regulator

An apparatus for regulating pressure of treatment fluid during ophthalmic procedures is described. Flow sensing and pressure regulating diaphragms are used to modulate a flow control valve. The pressure regulating diaphragm is connected to the flow control valve to urge the valve to an open position due to pressure being applied to the diaphragm by bias means such as a spring. The flow sensing diaphragm is mechanically connected to the flow control valve and urges it to an opened position because of the differential pressure on the diaphragm generated by a flow of incoming treatment fluid through an orifice in the diaphragm. A bypass connection with a variable restriction is connected in parallel relationship to the orifice to provide for adjusting the sensitivity of the flow sensing diaphragm. A multiple lever linkage system is utilized between the center of the second diaphragm and the flow control valve to multiply the force applied to the valve by the other diaphragm and reverse the direction of the force.

Baehr, E. F.↗
NASA NTRS1983

Device Stores and Discharges Metered Fluid

Hand-held container accepts measured amount of liquid from pressurized supply. Supply pressure drives spring-loaded piston that stores enough mechanical energy to discharge measured liquid into another container. Original application of container was to rehydrate sterilized pre-packaged food in zerogravity environment of space vehicles. Possible terrestrial applicatios include dispensing of toxic fluids or metering of fluids for household, commercial or laboratory uses.

Hooper, S. L.↗
NASA NTRS1981

Thermal expansion accommodation in a jet engine frame

Design advancements to enhance stress accommodation in gas turbine engine frames are described. Consideration is given to mechanical stiffness to maintain an adequate spring rate, and to thermal stresses in both ambient and transient modes. Noting that thermal stresses occur due to differing temperatures at different parts of the frame, the matching of the thermal expansion rates of different structural materials is emphasized. Adequate stiffness is necessary to avoid dynamic reactions leading to case cracking as a result of normal imbalances of moving parts. Stress and deflection analysis of a total frame concept using a three-dimensional finite element stress analysis computer program, with modelling of all frame components, is presented, and illustrations are provided.

Schneider, M. H.↗
NASA NTRS1989

Very low frequency suspension systems for dynamic testing

Specifications for a Space Station suspension system which can provide rigid-body translation frequencies on the order of 0.1-0.2 Hz for a 50-foot payload weighing about 3400 lb and having a number of highly flexible appendages are discussed. Two suspension devices are considered, an all-mechanical passive device based on coil springs and a device using a combination of a passive pneumatic system and an active electromagnetic system. Test results show that both devices meet the initial requirements.

Kienholz, David A.↗
NASA NTRS1993

Suppressing Oscillations In A Poppet Valve

Modification involving addition of damping mechanism extends life of poppet check velve, especially one carrying flow of gas. Mechanism, designed to fit commercial spring-loaded in-line poppet valve, includes dashpot damping axial oscillations and helps to keep poppet centered.

Morris, Brian G.↗
NASA NTRS1992

Power connect safety and connection interlock

A power connect safety and connection interlock system is shown for use with inverters and other DC loads (16) which include capacitor filter banks (14) at their DC inputs. A safety circuit (20) operates a spring (26) biased, solenoid (22) driven mechanical connection interference (24) which prevents mating and therefore electrical connection between the power contactor halves (11, 13) of the main power contacts (12) until the capacitor bank is safely precharged through auxiliary contacts (18). When the DC load (16) is shut down, the capacitor bank (14) is automatically discharged through a discharging power resistor (66) by a MOSFET transistor (60) through a discharging power resistor (66) only when both the main power contacts and auxiliary contacts are disconnected.

Rippel, Wally E.↗
NASA NTRS2008

Development of the Aquarius Antenna Deployment Mechanisms and Spring/Damper Actuator

The Aquarius Instrument s large radar reflector dish needed to be stowed for launch, and then deployed on-orbit. The Deployment Subsystem consisted of a cantilevered boom structure and two single-axis hinge mechanisms to accurately deploy and position the reflector dish relative to the radar feed horns. The cantilevered design demanded high stiffness and accuracy from the deployment mechanism at the root of the boom. A preload-generating end-of-travel latch was also required. To largely eliminate the need for control systems, each deployment mechanism was actuated by a passive spring motor with viscous-fluid damping. Tough requirements and adaptation of a heritage actuator to the new application resulted in numerous challenges. Fabrication, assembly, and testing encountered additional problems, though ultimately the system was demonstrated very successfully. This paper revisits the development to highlight which design concepts worked and the many important lessons learned.

Johnson, Joel A.↗
NASA NTRS2011

Diagonal-Axes Stage for Pointing an Optical Communications Transceiver

Traditional azimuth-elevation ("az-el") stages are used to point a variety of devices ranging from large optical telescopes to tank guns. Such a stage typically has an elevation stage having a horizontal axis mounted on an azimuth stage with a vertical axis. Both stages are often motorized. Optical communications transceivers often require two-axis motorized control, as when the communications link is between a ground station and an aircraft or satellite. In such applications, the traditional azimuth-elevation stage has two important drawbacks: a gimbal lock exclusion zone at zenith and susceptibility to pointing errors caused by backlash. Az-el stages in which the azimuth stage cannot rotate a full 360deg have the additional drawback of an azimuth exclusion zone. The diagonal-axes stage described here mitigates or eliminates all of these problems. Instead of one vertical axis and one horizontal axis, a diagonal-axes stage has two horizontal axes, both oriented at 45 to the trajectory of the target. For example, a ground station located on the equator tracking a satellite with an equatorial orbit would have one axis parallel to northeast and southwest, and the other axis parallel to northwest and southeast. The diagonal-axes stage is considerably less vulnerable to backlash. If it is correctly oriented, its axes rotate in only one direction during an overhead pass by a satellite. As a result, the effects of backlash may be inherently eliminated. If the gravity-induced torque on either axis changes during the pass, then backlash may become important during the part of the pass where the gravity torque, instead of opposing the motion of the stage, pushes the stage in the direction of motion. This can result in the loss of gear-to-gear contact in one or more stages of the gear reduction mechanism. In this case, a preload spring used to eliminate backlash need only be sufficiently strong to overcome the gravity torque, i.e. it need not overcome friction in the gear train. The diagonal-axes stage is not backlash-free for arbitrary target trajectories such as an aircraft might execute. If properly oriented for any particular satellite, however, it is backlash-free for all passes of that satellite, which will trace out parallel paths on the sky, and for all passes of any other satellite that are perpendicular to the first. It will also be backlash-free for some fraction of other satellite trajectories.

Regehr, Martin W.↗
NASA NTRS2012

Reducing Extra-Terrestrial Excavation Forces with Percussion

High launch costs and mission requirements drive the need for low mass excavators with mobility platforms, which in turn have little traction and excavation reaction capacity in low gravity environments. This presents the need for precursor and long term future missions with low mass robotic mining technology to perform In-Situ Resource Utilization (ISRU) tasks. This paper discusses a series of experiments that investigate the effectiveness of a percussive digging device to reduce excavation loads and thereby the mass of the excavator itself. The goal of percussive excavation is to fluidize dry regolith in front of the leading edge of the tool by mechanically separating the microscopic interlocking grains resulting in a reduced force needed to shear the soil. There are several variables involved with this technique; this experiment varied: Impact energy, frequency, and excavation speed and held constant: impact direction, depth of cut, angle of tool, and soil bulk density. The test apparatus consisted of an aluminum truss bridge with a central pivoting arm. Attached to the arm was a winch with a load cell in line that recorded the tension in the cable and therefore the excavation load. The arm could be adjusted for excavation depth which was recorded along with the arm angle relative to the bridge. A percussive mechanism and 30" wide pivoting bucket were attached at the end of the arm simulating a basic backhoe with a percussion direction tangent to the direction of . movement. Internally the mechanism used a set of die springs and barrel cam to produce the percussive blow. By changing the springs and the speed of the motor the impact energy and frequency of percussion could be varied independently. Impact energies from 11.2J to 30.5J and frequencies from 0 BPM to 700 BPM were investigated. A reduction in excavation force of as much as 51% was achieved in this experimental investigation. Smaller percussive digging implements, tested by others, have achieved a reduction of as much as 72%. This paper will examine the effects of impact energy, frequency, scaling and their effect on excavation forces in a dry granular material such as lunar regolith. The past several years have shown an increasing interest in mining space resources both for exploration and commercial enterprises. This work studied the benefits and risks of percussive excavation and prelimin~ry results indicate that this technique may become an enabling technology for extra-terrestrial excavation of regolith and ice.

Schuler, Jason↗
NASA NTRS2002

Investigation of Oxidation Profile in PMR-15 Polyimide using Atomic Microscope (AFM)

Nanoindentation measurements are made on thermosetting materials using cantiever deflection vs. piezoelectric scanner position behavior determined by AFM. The spring model is used to determine mechanical properties of materials. The generalized Sneddon's equation is utilized to calculate Young's moduli for thermosetting materials at ambient conditions. Our investigations show that the force-penetration depth curves during unloading in these materials can be described accurately by a power law relationship. The results show that the accuracy of the measurements can be controlled within 7%. The above method is used to study oxidation profiles in Pl\1R-15 polyimide. The thermo-mechanical profiles ofPNIR-15 indicate that the elastic modulus at the surface portion of the specimen is different from that at the interior of the material. It is also shown that there are two zones within the oxidized portion of the samples. Results confirm that the surface layer and the core material have substantially different properties.

Meador, Mary Ann B.↗
NASA NTRSDate not supplied

Modeling and Simulation of Rotary Sloshing in Launch Vehicles

The nonlinear dynamics of propellant sloshing during orbital ascent are usually neglected in the flight control analysis of large boost vehicles under the assumption that the viscous damping of the fluid is sufficient to suppress nonlinear phenomena and confine the fluid to small, planar free surface displacements. In this case, the sloshing dynamics can be modeled using a spring-mass-damper or linearized pendulum mechanical analog. However, large, smooth-wall tanks without significant internal hardware or ring baffles are still susceptible to nonlinear effects. In particular, rotary sloshing can present a risk to flight control as it involves the formation of a stable limit cycle which can lead to undesirable roll coupling. The underlying phenomena of jump resonance does not manifest in linear models, but can be reproduced using a nonlinear spherical pendulum or the Bauer paraboloid model developed during the Apollo/Saturn program. In this paper, a detailed analysis of the rotary sloshing dynamics of these mechanical analogs is presented, and discussed in the context of flight control stability. High-fidelity simulations of a representative boost vehicle are used to verify the semi-analytical predictions of the nonlinear dynamic response.

Modeling↗
NASA NTRS2003

Parameter Estimation of Spacecraft Nutation Growth Model

Modeling fuel slosh effects accurately and completely on spinning spacecraft has been a long standing concern within the aerospace community. Gyroscopic stiffness is obtained by spinning spacecraft as it is launched from one of the upper stages before it is placed in orbit. Unbalances in the spacecraft causes it to precess (wobble). The oscillatory motions are caused in the fuel due to this precession. This phenomenon is called 'fuel slosh' and the dynamic forces induced could adversely affect the stability and control of a spacecraft that spins about one of its minor moments of inertia axes. An equivalent mechanical model of fuel slosh is developed using springs and dampers that are connected to the rigid fuel tank. The stiffness and damping coefficients are the parameters that need to be identified in the fuel slosh mechanical model. This in turn is used in the spacecraft model to estimate the Nutation Time Constant (NTC) for the spacecraft. The experimental values needed for the identification of the model parameters are obtained from experiments conducted at Southwest Research Institute using the Spinning Slosh Test Rig (SSTR). The research focus is on developing models of different complexity and estimating the model parameters that will ultimately provide a more realistic Nutation Time Constant obtained through simulation.

Gangadharan, Sathya N.↗
NASA NTRS1988

The 1987-1988 advanced space design projects: Results from the fall semester of 1987 and the spring semester of 1988

Students in Aerospace Engineering (ASE) and Mechanical Engineering (ME) at the University of Texas at Austin completed eight separate design projects under the sponsorship of the NASA/USRA Advanced Space Design Program. During the Fall semester of 1987, ASE and ME students worked on various aspects of a 'bootstrap' lunar base. ASE students concentrated on the overall definition of the base while the ME team designed a convertible lunar lander lower stage. Six design projects were executed during the spring semester of 1988. Aerospace engineering students designed a fast Mars mission crew transfer vehicle, an Earth-orbiting transportation node to support the lunar base, a lunar base construction shack/initial habitat vehicle, and carried out a systems assessment aimed at arresting ozone depletion in the Earth's atmosphere. The ME students designed a lunar surface personnel navigation system and investigated radiation shielding structures for a lunar base. The design objectives, a summary of the results, and selected comments are given concerning each of the projects. Due to the number of projects completed, the reader should refer to the text of the final project reports for additional and detailed information.

Source record↗
DOE OSTI2022

Multimorphic Materials: Spatially Tailoring Mechanical Properties via Selective Initiation of Interpenetrating Polymer Networks

Access to multimaterial polymers with spatially localized properties and robust interfaces is anticipated to enable new capabilities in soft robotics, such as smooth actuation for advanced medical and manufacturing technologies. Here, orthogonal initiation is used to create interpenetrating polymer networks (IPNs) with spatial control over morphology and mechanical properties. Base catalyzes the formation of a stiff and strong polyurethane, while blue LEDs initiate the formation of a soft and elastic polyacrylate. IPN morphology is controlled by when the LED is turned “on”, with large phase separation occurring for short time delays (≈1–2 min) and a mixed morphology for longer time delays (>5 min), which is supported by dynamic mechanical analysis, small angle X-ray scattering, and atomic force microscopy. Through tailoring morphology, tensile moduli and fracture toughness can be tuned across ≈1–2 orders of magnitude. Furthermore, a simple spring model is used to explain the observed mechanical behavior. Photopatterning produces “multimorphic” materials, where morphology is spatially localized with fine precision (<100 µm), while maintaining a uniform chemical composition throughout to mitigate interfacial failure. As a final demonstration, the fabrication of hinges represents a possible use case for multimorphic materials in soft robotics.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Retractable tool bit having latch type catch mechanism

A retractable tool bit assembly for a tool such as an allen key is presented. The assembly includes one or more spring loaded nestable or telescoping tubular sections together with a catch mechanism for capturing and holding the tool in its retracted position. The catch mechanism consists of a latch mechanism located in a base section and which engages a conically shaped tool head located at the inner end of the tool. The tool head adjoins an eccentric oval type neck portion which extends to a rear lip of the tool head. The latch mechanism releases when the ovular neck portion rotates about the catch members upon actuation of a rotary tool drive motor. When released, all the telescoping sections and the tool extends fully outward to a use position.

Voellmer, George↗
NASA NTRS1974

Testing techniques for determining static mechanical properties of Pneumatic tires

Fore-aft, lateral, and vertical spring rates of model and full-scale pneumatic tires were evaluated by testing techniques generally employed by industry and various testing groups. The purpose of this experimental program was to investigate what effects the different testing techniques have on the measured values of these important static tire mechanical properties. The testing techniques included both incremental and continuous loadings applied at various rates over half, full, and repeated cycles. Of the three properties evaluated, the fore-aft stiffness was demonstrated to be the most affected by the different testing techniques used to obtain it. Appreciable differences in the fore-aft spring rates occurred using both the increment- and continuous-loading techniques; however, the most significant effect was attributed to variations in the size of the fore-aft force loop. The dependence of lateral stiffness values on testing techniques followed the same trends as that for fore-aft stiffness, except to a lesser degree. Vertical stiffness values were found to be nearly independent of testing procedures if the nonlinear portion of the vertical force-deflection curves is avoided.

Dodge, R. N.↗