Search NASA⌕ Search

SEARCH · Search NASA

Results for “methods and demonstration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Ultrasonic Method for Deployment Mechanism Bolt Element Preload Verification

Deployment mechanisms play a pivotal role in mission success. These mechanisms often incorporate bolt elements for which a preload within a specified range is essential for proper operation. A common practice is to torque these bolt elements to a specified value during installation. The resulting preload, however, can vary significantly with applied torque for a number of reasons. The goal of this effort was to investigate ultrasonic methods as an alternative for bolt preload verification in such deployment mechanisms. A family of non-explosive release mechanisms widely used by satellite manufacturers was chosen for the work. A willing contractor permitted measurements on a sampling of bolt elements for these release mechanisms that were installed by a technician following a standard practice. A variation of approximately 50% (+/- 25%) in the resultant preloads was observed. An alternative ultrasonic method to set the preloads was then developed and calibration data was accumulated. The method was demonstrated on bolt elements installed in a fixture instrumented with a calibrated load cell and designed to mimic production practice. The ultrasonic method yielded results within +/- 3% of the load cell reading. The contractor has since adopted the alternative method for its future production. Introduction

Johnson, Eric C.↗
NASA NTRS2006

Sense and Avoid Safety Analysis for Remotely Operated Unmanned Aircraft in the National Airspace System. Version 5

This document describes a method to demonstrate that a UAS, operating in the NAS, can avoid collisions with an equivalent level of safety compared to a manned aircraft. The method is based on the calculation of a collision probability for a UAS , the calculation of a collision probability for a base line manned aircraft, and the calculation of a risk ratio given by: Risk Ratio = P(collision_UAS)/P(collision_manned). A UAS will achieve an equivalent level of safety for collision risk if the Risk Ratio is less than or equal to one. Calculation of the probability of collision for UAS and manned aircraft is accomplished through event/fault trees.

Carreno, Victor↗
NASA NTRSDate not supplied

Coupling CFD and Material Response for Analysis of Mars Entry

In computing the response of an ablating thermal protection system during atmospheric entry, the aerothermal environment and material response are generally computed separately with a blowing correction term in the material response model to account for the blowing of char and pyrolysis gases [1]. In this work, we apply a coupled approach in which pyrolysis blowing gases, computed in the PATO material response code [2], are used with a blowing boundary condition in the DPLR hypersonic CFD code [3]. This leads to an iterative method in which blowing products from PATO are input into DPLR to update surface heating estimates. The full iterative method, with the addition of radiative heating estimates using the NEQAIR radiation solver [4], is shown in Fig. 1. The method is demonstrated on a sphere case with the environment and material properties based on the Mars Science Laboratory entry. Future work includes utilizing this method in computing full 3D material response during the Mars 2020 entry.

Heat Transfer↗
NASA NTRSDate not supplied

Coupling CFD and Material Response for Analysis of Mars Entry

In computing the response of an ablating thermal protection system during atmospheric entry, the aerothermal environment and material response are generally computed separately with a blowing correction term in the material response model to account for the blowing of char and pyrolysis gases. In this work, we apply a coupled approach in which pyrolysis blowing gases, computed in the PATO material response code, are used with a blowing boundary condition in the DPLR hypersonic CFD code. This leads to an iterative method in which blowing products from PATO are input into DPLR to update surface heating estimates. The full iterative method, with the addition of radiative heating estimates using the NEQAIR radiation solver, is shown in Fig. 1. The method is demonstrated on a sphere case with the environment and material properties based on the Mars Science Laboratory entry. Future work includes utilizing this method in computing full 3D material response during the Mars 2020 entry.

Ablation↗
NASA NTRSDate not supplied

Modeling of Cavity Residence Time via Modeled Lagrangian Particle Tracking

One of the critical components in a scramjet is the cavity flame holder. In evaluating the sizing of this component, the residence time of the fuel in the cavity is a common parameter used. However, to obtain the residence time via CFD is an expensive undertaking. One method is to perform an LES simulation of the cavity and use Lagrangian particle tracking to obtain both the mean and probability density function of the time that the particles remain in the cavity. While this method affords a significant amount of information, it is very costly in CPU run time. A simpler method involves performing a time accurate RANS simulation of the cavity, and when converged, overlay a traceable scalar in the cavity region, and then record the decay of this scalar’s flux at a downstream location. The time scale of the decay rate can then be estimated and a residence time inferred. This method is less computationally expensive than the LES approach, but still requires a time-accurate solution while only providing a mean cavity residence time evaluation. In this paper a method of determining the mean cavity residence time as well as the Probability Density Function (PDF) of the residence time is proposed and demonstrated. This method is based on Lagrangian particle tracking modeled by the Generalized Langevin Equation and is implemented as a post-processing step for a steady RANS solution. Computational cost is on the order of minutes and the results are in agreement with values obtained by the LES and scalar decay methods.

Langevin↗
NASA NTRS2005

Improvements in Virtual Sensors: Using Spatial Information to Estimate Remote Sensing Spectra

Various instruments are used to create images of the Earth and other objects in the universe in a diverse set of wavelength bands with the aim of understanding natural phenomena. Sometimes these instruments are built in a phased approach, with additional measurement capabilities added in later phases. In other cases, technology may mature to the point that the instrument offers new measurement capabilities that were not planned in the original design of the instrument. In still other cases, high resolution spectral measurements may be too costly to perform on a large sample and therefore lower resolution spectral instruments are used to take the majority of measurements. Many applied science questions that are relevant to the earth science remote sensing community require analysis of enormous amounts of data that were generated by instruments with disparate measurement capabilities. In past work [1], we addressed this problem using Virtual Sensors: a method that uses models trained on spectrally rich (high spectral resolution) data to "fill in" unmeasured spectral channels in spectrally poor (low spectral resolution) data. We demonstrated this method by using models trained on the high spectral resolution Terra MODIS instrument to estimate what the equivalent of the MODIS 1.6 micron channel would be for the NOAA AVHRR2 instrument. The scientific motivation for the simulation of the 1.6 micron channel is to improve the ability of the AVHRR2 sensor to detect clouds over snow and ice. This work contains preliminary experiments demonstrating that the use of spatial information can improve our ability to estimate these spectra.

Oza, Nikunj C.↗
NASA NTRS1976

A higher order panel method for linearized supersonic flow

A higher order panel method using linearly varying source and quadratically varying doublet distributions for computing linearized supersonic flow over arbitrary wings and bodies is described. With tangential mass flux boundary conditions on circular cones at angles of attack, the source panel method gave pressure distributions which are in excellent agreement with exact nonlinear theory. The numerical source panel method was demonstrated to be very stable by randomly panelling an axially symmetric body. For wings with thickness and camber, both the source and doublet panel methods yield excellent agreement with exact linearized solutions. Computational experiments indicate that the use of exact surface paneling in lieu of linearized boundary conditions for wings provides better agreement with higher order theory and with experiment.

Ehlers, F. E.↗
NASA NTRS1986

Efficient solution methods for the Navier-Stokes equations

Implicit finite difference schemes for solving two-dimensional and three-dimensional Euler and thin layer Navier-Stokes equations are addressed. The methods are demonstrated in fully vectorized codes for a Cray type architecture. The Beam and Warming implicit approximate factorization algorithm in generalized coordinates is used. The methods are either time accurate or accelerated non-time accurate steady state schemes. Acceleration and efficiency modifications such as matrix reduction, diagonalization, and flux split schemes are presented. Two dimensional inviscid and viscous calculations (e.g., airfoils with a deflected spoiler, circulation control airfoils, and unsteady buffeting) and of three dimensional viscous elliptical bodies, exhausting boattails, and generic oblique wing computations are discussed.

Pulliam, T. H.↗
NASA NTRS1987

Efficient probabilistic fracture mechanics analysis

A systematic and efficient method for probabilistic fracture mechanics analysis is proposed. The method is based on a most-probable-point-locus concept. The locus is obtained iteratively where the initial locus is determined using the linear approximation of the service life N(X) function about the mean values of the random variables X. Linear and quadratic approximations of N(X) are established locally at the most probable points, and the reliability analysis methods are used to compute the cumulative probabilities. By using two examples, the proposed method is demonstrated to be efficient and accurate. One example involved a random loading and N(X) was computed using cycle-by-cycle integration. The method is general and can be applied to other performance functions. It is particularly suitable when the computation of the performance function is time consuming such that Monte Carlo simulation is prohibitively costly.

Wu, Y.-T.↗
NASA NTRS2008

Simultaneous Noncontact Precision Imaging of Microstructural and Thickness Variation in Dielectric Materials Using Terahertz Energy

This article describes a noncontact single-sided terahertz electromagnetic measurement and imaging method that simultaneously characterizes microstructural (egs. spatially-lateral density) and thickness variation in dielectric (insulating) materials. The method was demonstrated for two materials-Space Shuttle External Tank sprayed-on foam insulation and a silicon nitride ceramic. It is believed that this method can be used as an inspection method for current and future NASA thermal protection system and other dielectric material inspection applications, where microstructural and thickness variation require precision mapping. Scale-up to more complex shapes such as cylindrical structures and structures with beveled regions would appear to be feasible.

Roth, Don J.↗
NASA NTRS2017

Near Real-Time Probabilistic Damage Diagnosis Using Surrogate Modeling and High Performance Computing

This work investigates novel approaches to probabilistic damage diagnosis that utilize surrogate modeling and high performance computing (HPC) to achieve substantial computational speedup. Motivated by Digital Twin, a structural health management (SHM) paradigm that integrates vehicle-specific characteristics with continual in-situ damage diagnosis and prognosis, the methods studied herein yield near real-time damage assessments that could enable monitoring of a vehicle's health while it is operating (i.e. online SHM). High-fidelity modeling and uncertainty quantification (UQ), both critical to Digital Twin, are incorporated using finite element method simulations and Bayesian inference, respectively. The crux of the proposed Bayesian diagnosis methods, however, is the reformulation of the numerical sampling algorithms (e.g. Markov chain Monte Carlo) used to generate the resulting probabilistic damage estimates. To this end, three distinct methods are demonstrated for rapid sampling that utilize surrogate modeling and exploit various degrees of parallelism for leveraging HPC. The accuracy and computational efficiency of the methods are compared on the problem of strain-based crack identification in thin plates. While each approach has inherent problem-specific strengths and weaknesses, all approaches are shown to provide accurate probabilistic damage diagnoses and several orders of magnitude computational speedup relative to a baseline Bayesian diagnosis implementation.

Warner, James E.↗
NASA NTRS1988

Optimization of interplanetary trajectories with unpowered planetary swingbys

A method is presented for calculating and optimizing unpowered planetary swingby trajectories using a patched conic trajectory generator. Examples of unpowered swingby trajectories are given to demonstrate the method. The method, which uses primer vector theory, is not highly accurate, but provides projections for preliminary mission definition studies. Advantages to using a patched conic trajectory simulation for preliminary studies which examine many different and complex missions include calculation speed and adaptability to changes or additions to the formulation.

Sauer, Carl G., Jr.↗
NASA NTRS1996

A Mathematical Model for Railway Control Systems

We present a general method for modeling safety aspects of railway control systems. Using our modeling method, one can progressively refine an abstract railway safety model, sucessively adding layers of detail about how a real system actually operates, while maintaining a safety property that refines the original abstract safety property. This method supports a top-down approach to specification of railway control systems and to proof of a variety of safety-related properties. We demonstrate our method by proving safety of the classical block control system.

Hoover, D. N.↗
NASA NTRS2013

Usage of Data-Encoded Web Maps with Client Side Color Rendering for Combined Data Access, Visualization and Modeling Purposes

Current approaches to satellite observation data storage and distribution implement separate visualization and data access methodologies which often leads to the need in time consuming data ordering and coding for applications requiring both visual representation as well as data handling and modeling capabilities. We describe an approach we implemented for a data-encoded web map service based on storing numerical data within server map tiles and subsequent client side data manipulation and map color rendering. The approach relies on storing data using the lossless compression Portable Network Graphics (PNG) image data format which is natively supported by web-browsers allowing on-the-fly browser rendering and modification of the map tiles. The method is easy to implement using existing software libraries and has the advantage of easy client side map color modifications, as well as spatial subsetting with physical parameter range filtering. This method is demonstrated for the ASTER-GDEM elevation model and selected MODIS data products and represents an alternative to the currently used storage and data access methods. One additional benefit includes providing multiple levels of averaging due to the need in generating map tiles at varying resolutions for various map magnification levels. We suggest that such merged data and mapping approach may be a viable alternative to existing static storage and data access methods for a wide array of combined simulation, data access and visualization purposes.

Pliutau, Denis↗
NASA NTRS1987

Determining structural performance

An overview is given of the methods and concepts developed to enhance and predict structural dynamic characteristics of advanced aeropropulsion systems. Aeroelasticity, Vibration Control, Dynamic Systems, and Computational Structural Methods are four disciplines that make up the research program at NASA/Lewis Research Center. The Aeroelasticity program develops analytical and experimental methods to minimize flutter and forced vibration of aerospace propulsion systems. Both frequency domain and time domain methods have been developed for applications on the turbofan, turbopump, and advanced turboprop. To improve life and performance, the Vibration Control program conceives, analyzes, develops, and demonstrates new methods to control vibrations in aerospace systems. Active and passive vibration control is accomplished with electromagnetic dampers, magnetic bearings, and piezoelectric crystals to control rotor vibrations. The Dynamic Systems program analyzes and verifies the dynamics of interacting systems, as well as develops concepts and methods for high-temperature dynamic seals. The Computational Structural Methods program uses computer science to improve solutions of structural problems.

Ernst, Michael A.↗
NASA NTRS1988

On the application of pseudo-spectral FFT technique to non-periodic problems

The reduction-to-periodicity method using the pseudo-spectral Fast Fourier Transform (FFT) technique is applied to the solution of nonperiodic problems including the two-dimensional Navier-Stokes equations. The accuracy of the method is demonstrated by calculating derivatives of given functions, one- and two-dimensional convective-diffusive problems, and by comparing the relative errors due to the FFT method with seocnd order Finite Difference Methods (FDM). Finally, the two-dimensional Navier-Stokes equations are solved by a fractional step procedure using both the FFT and the FDM methods for the driven cavity flow and the backward facing step problems. Comparisons of these solutions provide a realistic assessment of the FFT method indicating its range of applicability.

Biringen, S.↗
NASA NTRS2013

Re-imagining a Stata/Python Combination

At last year's Stata Conference, I presented some ideas for combining Stata and the Python programming language within a single interface. Two methods were presented: in one, Python was used to automate Stata; in the other, Python was used to send simulated keystrokes to the Stata GUI. The first method has the drawback of only working in Windows, and the second can be slow and subject to character input limits. In this presentation, I will demonstrate a method for achieving interaction between Stata and Python that does not suffer these drawbacks, and I will present some examples to show how this interaction can be useful.

Fiedler, James↗
NASA NTRS1973

An improved separability approximation for line radiative transport in nonhomogeneous media.

A simple modification to the constant half-width approximation of Wilson and Greif, which is an extension of the well-known Curtis-Godson method to the treatment of temperature variations along the integration path, is introduced which permits a more accurate evaluation of line radiative transport in nonhomogeneous gases. To demonstrate the method's accuracy, comparisons are made with Wilson and Greif and numerical frequency integrated results for the line equivalent width and radiative flux in a planar slab with prescribed Planck function and line half-width spatial variations. These variations are chosen to represent typical shock layer conditions. It is found that the modified procedure reduces the inaccuracies inherent in Wilson and Greif's approximation by factors ranging from 5 to 10, while retaining the latter method's ease of application.

Boughner, R. E.↗