Search NASA⌕ Search

SEARCH · Search NASA

Results for “microalgae”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Membrane-Based Energy Efficient Dewatering of Microalgae in Biofuels Production and Recovery of Value Added Co-Products

The objective of this paper is to describe the use of membranes for energy efficient biomass harvesting and dewatering. We have evaluated the dewatering of Nannochloropsis sp. with polymeric hollow fiber and tubular inorganic membranes to demonstrate the capabilities of a membrane-based system to achieve microalgal biomass of >150 g/L (dry wt.) and ~99% volume reduction through dewatering. The particle free filtrate containing the growth media is suitable for recycle and reuse. For cost-effective processing, hollow fiber membranes can be utilized to recover 90-95% media for recycle. Tubular membranes can provide additional media and water recovery to achieve target final concentrations. Based on the operating conditions used in this study and taking into scale-up considerations, it can be shown that an integrated hollow fiber-tubular membrane system can process microalgal biomass with at least 80% lower energy requirement compared to traditional processes. Backpulsing was found to be an effective flux maintenance strategy to minimize flux decline at high biomass concentration. An effective chemical cleaning protocol was developed for regeneration of fouled membranes.

biofuels↗

Effect of high pressure homogenization on aqueous phase solvent extraction of lipids from Nannochloris Oculata microalgae

The ability to extract lipids from high-moisture Nannochloris Oculata algal biomass disrupted with high pressure homogenization was investigated. During the first phase, the effect of high pressure homogenization (system pressure and number of passes) on disrupting aqueous algae (of different concentrations and degree of stress) was investigated. Secondly, the effect of degree of cell wall disruption on the amount of lipids extracted with three solvents, namely: hexane, dichloromethane and chloroform, were compared. Studies reveled that high pressure homogenization is effective on cell disruption while the amount of system pressure being the most significant factor affecting the degree of cell breakage. Although the number of passes had some impact, the level of disruption seemed to level-off after a certain number of passes. The study revealed that slightly polar solvents (such as chloroform and dichloromethane) performed better in aqueous-phase lipid extractions as compared to hexane. Also, it was revealed that it was not necessary to disrupt the algal cells completely to achieve appreciable levels of lipid yields. In fact, conditions that exerted only 20% of the cells to completely disrupt, allowed sufficient damage to liberate most of the lipids contained in the remainder of the cells.

09 BIOMASS FUELS↗

Estimating the Maximum Achievable Productivity in Outdoor Ponds: Microalgae Biomass Growth Modeling and Climate Simulated Culturing

To address the challenge of determining the maximum achievable monthly, seasonal, and annual biomass productivity for selected promising strains in outdoor ponds at any geographic location of interest, we developed the following four step integrated strategy. First, the strain is characterized in terms of its specific growth rate response to temperature and light, including darkness, as well as its light attenuation characteristics. Second, these species-specific parameters serve as inputs to PNNL’s biomass growth model that, in conjunction with the sunlight and pond water temperature predictions provided by PNNL’s Biomass Assessment Tool, is used to predict the respective biomass productivities for tens of thousands of hypothetical pond locations in the United States. Third, monthly and annual biomass productivity maps are created to identify the geographic location(s) of optimum biomass productivity and to generate light and water temperature “scripts” (time series) for hypothetical ponds at the best site(s). Finally, the maximum achievable biomass productivity for the given strain is confirmed by conducting culture experiments in PNNL’s indoor LED-lighted and temperature-controlled ponds under climate-simulated conditions, using the previously determined light and temperature scripts. This integrated strategy provides an efficient and low risk approach to screen promising strains for their potential to exhibit high biomass productivities, and to validate their model-predicted performance in climate-simulation ponds before transitioning to cultivation in outdoor raceways.

biomass assessment tool↗

Rapid Compositional Analysis of Microalgae by NIR Spectroscopy

One of the challenges associated with the development of algal biofuels is the rapid determination of the composition of algae. The oil content in particular is important in a biofuels production process and selecting the right algal strain from a pool of potentially thousands of candidates remains difficult. This article discusses how near infrared (NIR) spectroscopy is a technology that could be used for distinguishing algal strains and more importantly, differentiating between high and low oil content of biomass.

09 BIOMASS FUELS↗

Isolation, Preliminary Characterization and Preliminary Assessment of Scale-Up Potential of Photosynthetic Microalgae for the Production of Both Biofuels and Bio-Active Molecules in the U.S. and Canada (CRADA Final Report)

Combustion flue gases are a major contributor to carbon dioxide emissions into the Earth's atmosphere, a factor that has been linked to the possible global climate change. It is, therefore, critical to begin thinking seriously about ways to reduce this influx into the atmosphere. Using carbon dioxide from fossil fuel combustion as a feedstock for the growth, photosynthetic microorganisms can provide a large sink for carbon assimilation as well as a feedstock for the production of significant levels of biofuels. Combining microalgal farming with fossil fuel energy production has great potential to diminish carbon dioxide releases into the atmosphere, as well as contribute to the production of biofuels (e.g., biodiesel, renewable diesel and gasoline and jet fuel) as well as valuable co-products such as animal feeds and green chemicals. CO 2 capture may be a regulatory requirement in future new coal or natural gas power plants and will almost certainly become an opportunity for commerce, the results of such studies may provide industries in the US and Canada with both regulatory relief and business opportunities as well as the ability to meet environmental and regulatory requirements, and to produce large volumes of fuels and co-products.

09 BIOMASS FUELS↗

Process Optimization and Real-Time Control of Synergistic Microalgae Cultivation and Wastewater Treatment (Final Technical Report)

The overarching goal of this work was to accelerate the commercialization of high productivity, mixed community microalgal treatment technologies for the synergistic treatment of wastewater and the production of biofuel feedstocks. This project addressed a critical barrier to the financial viability and energy efficiency of algal wastewater treatment: an inability to design and operate high-rate processes that reliably achieve target effluent qualities, areal productivities, and biochemical compositions (lipid, protein, carbohydrate content) despite fluctuations in wastewater composition, weather, and microbial communities. Key outcomes from this work include an optimized and controlled Advanced Biological Nutrient Recovery (ABNR) design as well as a suite of open-source tools that include a calibrated and validated algae process simulator in QSDsan and a novel low-cost, real-time microbial monitoring tool. These tools can be leveraged by other algal cultivation and wastewater treatment technology developers in future work.

09 BIOMASS FUELS↗

Green microalga Chromochloris zofingiensis conserves substrate uptake pattern but changes their metabolic uses across trophic transition

The terrestrial green alga Chromochloris zofingiensis is an emerging model species with potential applications including production of triacylglycerol or astaxanthin. How C. zofingiensis interacts with the diverse substrates during trophic transitions is unknown. To characterize its substrate utilization and secretion dynamics, we cultivated the alga in a soil-based defined medium in transition between conditions with and without glucose supplementation. Then, we examined its exometabolite and endometabolite profiles. This analysis revealed that regardless of trophic modes, C. zofingiensis preferentially uptakes exogenous lysine, arginine, and purines, while secreting orotic acid. Here, we obtained metabolomic evidences that C. zofingiensis may use arginine for putrescine synthesis when in transition to heterotrophy, and for the TCA cycle during transition to photoautotrophy. We also report that glucose and fructose most effectively inhibited photosynthesis among thirteen different sugars. The utilized or secreted metabolites identified in this study provide important information to improve C. zofingiensis cultivation, and to expand its potential industrial and pharmaceutical applications.

59 BASIC BIOLOGICAL SCIENCES↗

Chapter 7: Microalgae

This chapter of the 2016 Billion-Ton Report provides an estimate of biomass potential at given minimum selling prices. This is not a projection of actual measured biomass or a simulation of commercial projects. Biomass potential is estimated based on 30 years of hourly local climate and strain-specific biophysical characteristics using the Biomass Assessment Tool (BAT), assuming sufficient available nutrients (including CO2). As is the case for terrestrial feedstocks, important resource analysis questions for algae include not only how much of the crop may be available but also what price might be needed to procure that supply. Identifying resource co-location opportunities for algal biofuel facilities has the potential to reduce costs, utilize waste resources, and focus attention on appropriate technologies and locations for commercialization.

09 BIOMASS FUELS↗