Search NASA⌕ Search

SEARCH · Search NASA

Results for “monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Effect of ground-state charge transfer on photoexcited charge transfer in transition metal dichalcogenide heterostructures

We report an experimental investigation on the effect of ground-state charge transfer and its induced electric field on photoexcited charge transfer in van der Waals heterostructures. Two heterostructure samples were fabricated by stacking an undoped WSe 2 monolayer with either a Nb-doped or undoped MoSe 2 monolayer. While no ground-state charge transfer is expected in the MoSe 2 /WSe 2 heterostructure, the doped holes in the MoSe 2 :Nb/WSe 2 heterostructure can transfer to WSe 2 , creating a space-charge electric field. By comparing the photoluminescence and time-resolved differential reflectance of the two heterostructures, we find that photoexcited hole transfer from MoSe 2 to WSe 2 is largely blocked by this field, whereas photoexcited electron transfer from WSe 2 to MoSe 2 is less affected. Furthermore, these results provide insight into the impact of doping on the charge-transfer performance of van der Waals heterostructures.

2D materials↗
DOE OSTI2025

Sticking Coefficients of Fusion Reactor Impurities from Molecular Dynamics Simulations for the Design of Cryopumps

A cryopump can be utilized as an impurity removal component of a direct internal recirculation (DIR) system for the fusion fuel cycle. The DIR facilitates a low fuel inventory by continuously pumping unburnt fuel while removing impurities from the fusion exhaust stream. A cryopump can target multiple impurity species by maintaining a temperature lower than the gas triple-point temperature that promotes desublimation. The desublimation/condensation of gases in cryopumps can be characterized by the sticking coefficient, which is defined as the probability for a gas particle to stick to a (cryo-)surface upon collision. The sticking coefficient is one of the important design/operation parameters for cryopumps, and it depends on a variety of surface and gas properties. Here, in this study, molecular dynamics simulations were utilized to estimate the sticking coefficients of typical fusion gas impurity species N 2 , CO 2 , and CH 4 over a Cu surface for a range of gas temperatures and surface coverages. The molecular dynamics study showed that the sticking coefficients for gases decrease with an increase in gas temperature. The presence of a single full monolayer of condensate on the metallic surface showed an adverse effect on the sticking of gases; however the sticking improved with two full monolayers of condensate on the surface. The sticking of gases over the mixed condensate on a surface was more favorable than the condensate of the same species for N 2 and CH 4 , with an exception for CO 2 , which showed a decrease in sticking over the mixed condensate.

cryopump↗
DOE OSTI2025

Selective enhancement of Coulomb interactions in planar Weyl fermions

We report on our study of the electron interaction effects in topological two-dimensional (2D) materials placed in a quantizing magnetic field. Taking our cue from a recent experimental report, we consider a particular case of bismuthene monolayer with a strong spin-orbit interaction which can be a Weyl semimetal when placed on a specially tuned substrate. Interestingly, we observe that in some Landau levels of this material, the interaction effects are enhanced compared to those for a conventional 2D system and graphene monolayer. Such an enhancement of electron-electron interactions in these materials is largely due to an anisotropy present in the materials. Additionally, the interaction effects can be tuned by changing the coupling to the substrate and the strongest inter-electron interactions are observed when the system is a Weyl semimetal. Furthermore, the observed enhancement of the interaction effects can therefore be an important signature of the 2D Weyl fermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

New amphiphilic complexes with luminescent rare-earth ions

Organic compounds containing luminous rare-earth ions are of interest for numerous nanophotonic and plasmonic applications, including nanoscale lasers, biosensors, and optical magnetism studies. Optical studies of Eu 3+ complexes revealed that ultra-thin LB monolayers are highly luminescent even when deposited directly on plasmonic metal, which makes these materials very promising for plasmonic applications and studies, including control and enhancement of magnetic dipole emission with a plasmonic environment. In this work, we synthesize amphiphilic complexes with various rare-earth ions Nd 3+ , Yb 3+ , and DPT ligands and show that they all are suitable for monolayer or multilayer deposition with the Langmuir–Blodgett (LB) technique. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2025

Controlling Interfacial Energetics and Charge Transfer Rates in 2D Semiconductors: Fundamental Studies en Route to Photoelectrochemical Energy Conversion Beyond the Shockley-Queisser Limit (Final Scientific/Technical Report)

Current photovoltaic and solar-to-fuel technologies do not fully utilize the energy of sunlight because excess photon energy above the semiconductor band gap is rapidly lost as heat through hot-carrier thermalization. Overcoming this loss mechanism is critical, as hot-carrier-based energy conversion systems are predicted to exceed the conventional efficiency limit of ~33%. This project advanced fundamental understanding of hot-carrier energy conversion in two-dimensional (2D) semiconductors, with a focus on monolayer MoS 2 . Using a combination of electrochemical microscopy and in situ ultrafast spectroscopic measurements, this research directly demonstrated hot-carrier extraction from monolayer MoS 2 photoelectrodes in proof-of-concept liquid junction solar cells. These measurements established that hot-carrier transfer can compete with ultrafast carrier cooling at solid–liquid interfaces, providing unambiguous experimental evidence that hot-carrier extraction is feasible in atomically thin semiconductors under operating photoelectrochemical conditions. Beyond demonstration, the project identified design rules for tuning hot-carrier extraction rates relative to cooling rates in 2D semiconductor photoelectrodes. The outcomes of this research provide foundational thermodynamic and kinetic insights for the rational design of next-generation hot-carrier-enabled solar energy conversion systems. These findings have broad implications for photoelectrochemical solar fuels production, electrocatalysis, and emerging energy conversion architectures that seek to harness nonequilibrium charge carriers for enhanced efficiency.

14 SOLAR ENERGY↗
DOE OSTI2024

Mineral Deposition on the Rough Walls of a Fracture

Modeling carbonate growth in fractures and pores is important for understanding carbon sequestration in the environment or when supersaturated solutions are injected into rocks. Here, we study the simple but nontrivial problem of calcite growth on fractures with rough walls of the same mineral using kinetic Monte Carlo simulations of attachment and detachment of molecules and scaling approaches. First, we consider wedge-shaped fracture walls whose upper terraces are in the same low-energy planes and show that the valleys are slowly filled by the propagation of parallel monolayer steps in the wedge sides. The growth ceases when the walls reach these low-energy configurations so that a gap between the walls may not be filled. Second, we consider fracture walls with equally separated monolayer steps (vicinal surfaces with roughness below 1 nm) and show that growth by step propagation will eventually clog the fracture gap. In both cases, scaling approaches predict the times to attain the final configurations as a function of the initial geometry and the step-propagation velocity, which is set by the saturation index. The same reasoning applied to a random wall geometry shows that step propagation leads to lateral filling of surface valleys until the wall reaches the low-energy crystalline plane that has the smallest initial density of molecules. Thus, the final configurations of the fracture walls are much more sensitive to the crystallography than to the roughness or the local curvature. The framework developed here may be used to determine those configurations, the times to reach them, and the mass of deposited mineral. Effects of transport limitations are discussed when the fracture gap is significantly narrowed.

calcite↗
DOE OSTI2025

High‐Performance Al–S Batteries by Spin Polarization Modulation via Catalytic Ni‐MoS 2 Nanosheets

Aluminum–sulfur (Al–S) batteries catalysts with adsorption and catalytic capabilities can effectively improve the slow redox kinetics, but the current research often ignores the effect of optimizing the electronic structure of the catalyst on improving charge transfer and adsorption. Here, in this study, Ni-doped monolayer MoS 2 nanosheets are synthesized and used as a catalytic additive for the sulfur cathode. The addition of Ni promotes spin splitting of 4d orbital of Mo, thereby affecting polarization degree of the basal plane sulfur and making it change from a low spin state to a high spin one. This high spin configuration raises the electron energy level and provides an active electron state to react with aluminum polysulfides (AlPSs), which optimizes the adsorption energy. At the same time, it accelerates electron transfer and lowers the energy barrier for the overall conversion of the polysulfides. Benefiting from these features, Al–S batteries based on rationally designed S@Ni-MoS 2 /C cathodes exhibit a high initial capacity (1603.0 mAh g −1 at 0.5 A g −1 ) and extraordinary cycling stability (0.035% capacity decay rate during 2000 cycles). This study showcases a spin-polarized electronic structure control strategy to enhance catalytic activity, providing a viable approach for developing efficient catalysts for practical Al–S batteries.

Aluminum-sulfur batteries↗
DOE OSTI2025

Identifying Band Inversions in Topological Materials Using Diffusion Monte Carlo

Topological insulators are characterized by insulating bulk states and robust metallic surface states. Band inversion is a hallmark of topological insulators. At time-reversal invariant points in the Brillouin zone, spin–orbit coupling (SOC) induces a swapping of orbital character at the bulk band edges. Reliably detecting band inversion in solid-state systems with many-body methods would aid in identifying possible candidates for spintronics and quantum computing applications and improve our understanding of the physics behind topologically nontrivial systems. Density functional theory (DFT) methods are a well-established means of investigating these interesting materials due to their favorable balance of computational cost and accuracy but often struggle to accurately model the electron–electron correlations present in the many materials containing heavier elements. In this work, we develop a novel method to detect band inversion within continuum quantum Monte Carlo (QMC) methods that can accurately treat the electron correlation and spin–orbit coupling that are crucial to the physics of topological insulators. Our approach applies a momentum-space-resolved atomic population analysis throughout the first Brillouin zone utilizing the Löwdin method and the one-body reduced density matrix produced with diffusion Monte Carlo (DMC). We integrate this method into QMCPACK, an open source ab initio QMC package, so that these ground-state methods can be used to complement experimental studies and validate prior DFT work on predicting the band structures of correlated topological insulators. Here, we demonstrate this new technique on the topological insulator bismuth telluride, which displays band inversion between its Bi-p and Te-p states at the Γ-point. We show an increase in charge on the bismuth-p orbital and a decrease in charge on the tellurium-p orbital when comparing band structures with and without SOC. Additionally, we use our method to compare the degree of band inversion present in monolayer Bi 2 Te 3 , which has no interlayer van der Waals interactions, to that seen in the bilayer and bulk. The method presented here will enable future many-body studies of band inversion that can shed light on the delicate interplay between correlation and topology in correlated topological materials.

Band structure↗
DOE OSTI2024

X-ray Induced Cycling of Rare-Earth Elements between Bulk and Interfacial Liquid

Reversible cycling of rare-earth elements between an aqueous electrolyte solution and its free surface is achieved by X-ray exposure. This exposure alters the competitive equilibrium between lanthanide ions bound to a chelating ligand, diethylenetriamine pentaacetic acid (DTPA), in the bulk solution and to insoluble monolayers of extractant di-hexadecyl phosphoric acid (DHDP) at its surface. Evidence for the exposure-induced temporal variations in the lanthanide surface density is provided by X-ray fluorescence near total reflection measurements. Comparison of results when X-rays are confined to the aqueous surface region to results when X-rays transmit into the bulk solution suggests the importance of aqueous radiolysis in the adsorption cycle. Amine binding sites in DTPA are identified as a likely target of radiolysis products. The molecules DTPA and DHDP are like those used in the separation of lanthanides from ores and in the reprocessing of nuclear fuel. Furthermore, these results suggest that an external source of X-rays can be used to drive rare-earth element separations. More generally, use of X-rays to controllably dose a liquid interface with lanthanides could trigger a range of interfacial processes, including enhanced metal ion extraction, catalysis, and materials synthesis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Deposition-Dependent Coverage and Performance of Phosphonic Acid Interface Modifiers in Halide Perovskite Optoelectronics

In this work, we study the effect of various deposition methods for phosphonic acid interface modifiers commonly pursued as self-assembled monolayers in high-performance metal halide perovskite photovoltaics and light-emitting diodes. We compare the deposition of (2-(3,6-diiodo-9H-carbazol-9-yl)ethyl)phosphonic acid onto indium tin oxide (ITO) bottom contacts by varying three parameters: the method of deposition, specifically spin coating or prolonged dip coating; ITO surface treatment via HCl/FeCl3 etching; and use in combination with a second modifier, 1,6-hexylenediphosphonic acid. We demonstrate that varying these modification protocols can impact time-resolved photoluminescence carrier lifetimes and quasi-Fermi level splitting of perovskite films deposited onto the phosphonic acid-modified ITO. Ultraviolet photoelectron spectroscopy shows an increase in the effective work function after phosphonic acid modification and clear evidence for photoemission from carbazole functional groups at the ITO surface. We used X-ray photoelectron spectroscopy to probe differences in phosphonic acid coverage on the metal oxide contact and show that perovskite samples grown on ITO with the highest phosphonic acid coverage exhibit the longest carrier lifetimes. Finally, we establish that device performance follows these same trends. These results indicate that the reactivity, heterogeneity, and composition of the bottom contact help to control recombination rates and therefore power conversion efficiencies. ITO etching, prolonged deposition times for phosphonic acids via dip coating, and the use of a secondary, more hydrophilic bisphosphonic acid all contribute to improvements in surface coverage, carrier lifetime, and device efficiency. Furthermore, these improvements each have a positive impact, and we achieve the best results when all three strategies are implemented.

contact engineering↗
DOE OSTI2026

Catalytic Triad-Inspired Nanozyme Catalysts for Ester Hydrolysis in Organic Solvent Mixtures

We synthesized a series of molecular nanozyme catalysts containing functional groups (imidazole, carboxylic acid, and hydroxyl groups) inspired by the catalytic triad found in natural serine hydrolases. Different structural features were incorporated using two distinct synthesis routes to investigate the influence of interactions beyond the active site on catalytic activity in designing molecular nanozymes. Molecular dynamics simulations suggest that nanozyme activity is affected by structural features that influence nanozyme hydrophilicity and the organization of the local solvent environment. The most active nanozyme showed activity comparable to the enzyme α-chymotrypsin for the hydrolysis of a model ester (4-nitrophenyl 4- hydroxybenzoate) in a 95:5 (v/v%) water/acetonitrile mixture at ambient temperature. Increasing the temperature and organic solvent content decreases the activity of α-chymotrypsin while enhancing the activity of the nanozymes. The nanozymes can be immobilized on supported metal nanoparticles using a dithiol self-assembled monolayer, which facilitates their removal from the postreaction solution. These results demonstrate the potential in creating solvent-tolerant bioinspired catalysts, thereby combining the advantages of biocatalysts and chemical catalysts as next-generation industrial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Improved Mechanical Adhesion Enabled by Bilayer Hole Transport Layers in Perovskite Solar Cells

We investigate buried-interface mechanical integrity in metal-halide perovskite half-cells using carbazole-based self-assembled monolayers (SAMs) and bilayer hole transport layers composed of metal oxide underlayers and SAMs. Combining macroscopic and microscopic characterization, we quantify interfacial fracture energy (Gc) and identify delamination pathways. SAM deposition on NiOx increases Gc by approximately 10-fold compared with ITO, highlighting the importance of oxide underlayer selection. To isolate the effect of removing noncovalently bonded SAM molecules, we use vapor-deposited perovskite as a solvent-free model system, decoupling the rinse step inherent to solution processing. Removing loosely bound SAM molecules increases Gc from 0.94 +- 0.08 J.m-2 to 4.82 +- 0.79 J.m-2. These results show that oxide selection and SAM binding quality are both critical for strengthening buried interfaces and designing mechanically robust perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2024

Epitaxial Metal Electrodeposition Controlled by Graphene Layer Thickness

Control over material structure and morphology during electrodeposition is necessary for material synthesis and energy applications. One approach to guide crystallite formation is to take advantage of epitaxy on a current collector to facilitate crystallographic control. Single-layer graphene on metal foils can promote “remote epitaxy” during Cu and Zn electrodeposition, resulting in growth of metal that is crystallographically aligned to the substrate beneath graphene. However, the substrate–graphene–deposit interactions that allow for epitaxial electrodeposition are not well understood. Here, we investigate how different graphene layer thicknesses (monolayer, bilayer, trilayer, and graphite) influence the electrodeposition of Zn and Cu. Scanning transmission electron microscopy and electron backscatter diffraction are leveraged to understand metal morphology and structure, demonstrating that remote epitaxy occurs on mono- and bilayer graphene but not trilayer or thicker. Density functional theory (DFT) simulations reveal the spatial electronic interactions through thin graphene that promote remote epitaxy. This work advances our understanding of electrochemical remote epitaxy and provides strategies for improving control over electrodeposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tunable Localized Charge Transfer Excitons in Nanoplatelet–2D Chalcogenide van der Waals Heterostructures

Observation of interlayer, charge transfer (CT) excitons in van der Waals heterostructures (vdWHs) based on 2D–2D systems has been well investigated. While conceptually interesting, these charge transfer excitons are highly delocalized and spatially localizing them requires twisting layers at very specific angles. This issue of localizing the CT excitons can be overcome via making nanoplate–2D material heterostructures (N2DHs) where one of the components is a spatially quantum confined medium. Here, we demonstrate the formation of CT excitons in a mixed dimensional system comprising MoSe 2 and WSe 2 monolayers and CdSe/CdS-based core/shell nanoplates (NPLs). Spectral signatures of CT excitons in our N2DHs were resolved locally at the 2D/single-NPL heterointerface using tip-enhanced photoluminescence (TEPL) at room temperature. By varying both the 2D material and the shell thickness of the NPLs and applying an out-of-plane electric field, the exciton resonance energy was tuned by up to 100 meV. Finally, our finding is a significant step toward the realization of highly tunable N2DH-based next-generation photonic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Spontaneous Polarization Suppression of Exciton–Exciton Annihilation in Rhombohedral-Stacked Bilayer Molybdenum Disulfide

Rapid exciton–exciton annihilation (EEA) in two-dimensional semiconductors limits access to high-density excitonic regimes essential for efficient optoelectronic operation under strong excitation. Here, we show that EEA is strongly suppressed in rhombohedral (3R)-stacked MoS 2 bilayers relative to nonpolar 2H bilayers, and that this suppression is quantitatively consistent with repulsive dipole–dipole interactions between layer-polarized excitons induced by spontaneous polarization. Using ultrafast pump–probe spectroscopy, we measure an EEA rate of γ EEA = (5.03 ± 0.99) × 10 –3 cm 2 s –1 in 3R bilayers, which is approximately 18.2-fold smaller than that in monolayers and 2.9-fold smaller than that in nonpolar 2H bilayers. Despite the higher exciton diffusivity recently reported for 3R relative to 2H bilayers, the reduced EEA rate in 3R indicates a rate-limited regime governed by the close-encounter annihilation probability rather than diffusion. A rate-limited annihilation model incorporating a dipole–dipole repulsive potential captures the observed ratio γ EEA,3R /γ EEA,2H ≈ 0.35 for an exciton–exciton encounter distance of ∼1.3 nm, consistent with the bilayer exciton Bohr radius. These results indicate that spontaneous polarization in 3R-stacked bilayers can suppress nonlinear excitonic losses and provide a route toward high-density excitonics.

dipolar excitons↗
DOE OSTI2025

Excitation Laser Energy Dependence of the Gap-Mode TERS Spectra of WS 2 and MoS 2 on Silver

In this work we present a systematic study of the dependence of the gap mode tip-enhanced Raman scattering (TERS) response of the mono- and bi-layer WS 2 and MoS 2 on silver as a function of the excitation laser energy in a broad spectral range from 473nm to 830 nm. For this purpose, we collected consecutive TERS maps of the same area in the sample containing mono-and bi-layer regions with the same TERS probe with 6 different excitation lasers. To decrease the number of collected TERS maps, we used for the first time to the best of our knowledge, concurrent excitation and collection with two lasers simultaneously. We found that the E 2g /A 1g peak intensity ratio for the bilayer WS 2 @Ag and the ratio of the A’/A 1g peak intensity of the out-of-plane mode for the mono- and the bilayer, change in a significantly non-monotonous way as the excitation laser energy is swept from 1.58 eV to 2.62 eV. The former ratio increases at energies corresponding to A and B excitons (~2.0 eV and 2.4 eV correspondingly) in bilayer WS 2 . The absolute intensity of the A’ peak in the monolayer, and correspondingly the A’/A 1g ratio, is surprisingly high at lower excitation energies, but dips dramatically at the energy corresponding to the A exciton, being restored partially in between A and B excitons, but still showing the descending trend as the excitation laser energy increases. A somewhat similar picture was observed in mono- and bi-layers of MoS 2 @Ag, though the existing set of excitation lasers did not match the excitonic profile of this material as nicely as for the case of WS 2 . We attribute the observed behavior to the presence of intermediate (Fano resonance) or strong (Rabi splitting) coupling between the excitons in transition metal dichalcogenides (TMDs) and the plasmons in the tip-substrate nanocavity. This is akin to the so-called Fano (Rabi) transparency experimentally observed in far field scattering from transition metal dichalcogenides between two plasmonic metals. The possibility of the formation of intermediate/strong coupling between the excitonic resonances in TMDs and the nanocavity re-evaluates the role of various resonances in the gap-mode TERS and should become an important factor to be considered by TERS practitioners during planning the experiments. Lastly, based on observed phenomena and its explanation, we propose the “ideal” substrate for efficient TERS and tip enhanced photoluminescence (TEPL) measurements.

Raman spectroscopy↗
DOE OSTI2026

Improving perovskite solar module stability by understanding and mitigating scribe-induced chemo-thermomechanical degradation

Recognizing the correlation between the design of perovskite solar module (PSM) and their degradation mechanisms under environmental stressors helps to enable their long- term reliability. This work reports on the impact of the hole-transport layer (HTL) on thermal cyclability and degradation mechanisms of p-i-n PSMs by comparing 3 HTLs: NiO x , MeO-2PACz (a self-assembled monolayer), and a bilayer HTL of MeO-2PACz on NiO x . We observe surprising thermal cyclability from a performance standpoint despite generating clear degradation products. We find that without a fully dense HTL, seemingly insignificant moisture/oxygen ingress through the edge of the PSMs can lead to rapid destabilization of the metal halide perovskite (MHP) layer due to reactions between MHP degradation byproducts and the indium-tin oxide layer. We also show that illumination-induced cation phase segregation is dependent on the presence of an inactive area (regions of the substrate uncovered by the top electrode). As such, we find that a dense interface between the MHP and ITO is necessary for chemically robust PSMs and highlight criteria for testing field-relevant configurations in lab-scale architectures.

14 SOLAR ENERGY↗
DOE OSTI2024

Engineering collinear magnetization in hexagonal LuFeO 3 and magnetoelectric control of skyrmions in hexagonal 2D epilayers

Cubic, perovskite-structure ABO 3- and A 1–x A’ x BO 3 -type oxides have been investigated extensively while their hexagonal structure versions have not, even though they are multiferroic and can form heterostructures with hexagonal 2D materials. In particular, multiferroic 2D epilayers may lead to strong magnetoelectric coupling. Hexagonal RFeO 3 ferrites, where R is a rare-earth element (Lu, Yb, etc.), are excellent candidates, but their ferromagnetism isweak. In this paper, we employ density-functional-theory (DFT) calculations and first show that heavy electron doping of hexagonal LuFeO 3 (h-LFO), namely Lu 1–x Hf x FeO 3 (h-LHFO), leads to spin-disproportionation of the Fe sublattices and, especially for x = 1/2 and 2/3, to robust, room-temperature, out-of-plane, collinear ferrimagnetism that is stabilized by a Jahn-Teller metal-to-insulator transition. We then show that h-LHFO/h-2D heterostructures, where h-2D is the FE/ FM monolayer MnSTe, stabilize skyrmions without an external magnetic field and control their chirality by an external electric field through the h-LHFO polarization, opening up a new realm for magnetoelectric applications.

36 MATERIALS SCIENCE↗