Search NASA⌕ Search

SEARCH · Search NASA

Results for “multivariate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A new spectral synthesis procedure for multivariable regulators

A method for selecting a multivariable state feedback controller that simultaneously achieves an a priori specification on closed loop eigenvalues and good mode mixing is presented. The problem is solved by projecting a desired modal matrix onto a constraint set containing the null space of the closed-loop state matrix, while assuring that the projection is in the null space. The feedback matrix follows immediately in the formulation. An example involving a helicopter hover controller is presented.

Maynard, R. A.↗
NASA NTRS1980

Design of a multivariable integrated control for a supersonic propulsion system

An inlet/engine/nozzle integrated control mode for the propulsion system of an advanced supersonic commercial aircraft was studied. Results show that integration of these control functions can result in both operational and performance benefits for the propulsion system. For example, this integrated control mode may make it possible to minimize the use of inlet bypass doors for shock position control. This may be of benefit to the aircraft as a result of minimizing: (1) bypass bleed drag effects; (2) perturbations to the aircraft resulting from the side thrust effect of the bypass bleeds; and (3) potential unstarts of the inlet. A conceptual integrated control mode was developed which makes use of many cross coupling paths between inlet and engine control variables and inlet and engine sensed variables. A multivariable control design technique based upon linear quadratic regulator theory was applied to designing the feedback gains for this control to allow a simulation evaluation of the benefits of the integrated control mode.

Beattie, E. C.↗
NASA NTRS1980

Finite difference grid generation by multivariate blending function interpolation

The General Interpolants Method (GIM) code which solves the multidimensional Navier-Stokes equations for arbitrary geometric domains is described. The geometry module in the GIM code generates two and three dimensional grids over specified flow regimes, establishes boundary condition information and computes finite difference analogs for use in the GIM code numerical solution module. The technique can be classified as an algebraic equation approach. The geometry package uses multivariate blending function interpolation of vector-values functions which define the shapes of the edges and surfaces bounding the flow domain. By employing blending functions which conform to the cardinality conditions the flow domain may be mapped onto a unit square (2-D) or unit cube (3-D), thus producing an intrinsic coordinate system for the region of interest. The intrinsic coordinate system facilitates grid spacing control to allow for optimum distribution of nodes in the flow domain.

Anderson, P. G.↗
NASA NTRS1979

On the applicability of eigenvalue/eigenvector assignment in multivariable systems

The technique of multivariable control-system design via assignment of the closed loop state matrix eigensystem is described. Features of this developing methodology include exact eigenvalue assignment, eigenvector assignment that approximates in a least squares sense a priori modal specifications, and an interactive design trade-off between the latter and desired eigensystem sensitivity with respect to plant parameters.

Liberty, S. R.↗
NASA NTRS1980

Design of a robust multivariable proportional plus integral controller via spectral assignment

A new design procedure for a class of multivariable integral plus proportional servo control systems is presented. The procedure utilizes a null space formulation of the eigensystem assignment problem assuming complete state feedback. Reduced order observers are used to estimate unavailable states. The resulting system realizes arbitrary closed-loop eigenvalues, approximates specified modal behavior and achieves low eigensystem sensitivity with respect to plant parameter variations. A tutorial example to illustrate the design procedure is included.

Mielke, R. R.↗
NASA NTRS1981

Multivariable feedback design - Concepts for a classical/modern synthesis

This paper presents a practical design perspective on multivariable feedback control problems. It reviews the basic issue - feedback design in the face of uncertainties - and generalizes known single-input, single-output (SISO) statements and constraints of the design problem to multiinput, multioutput (MIMO) cases. Two major MIMO design approaches are then evaluated in the context of these results.

Doyle, J. C.↗
NASA NTRS1981

Robustness results in linear-quadratic Gaussian based multivariable control designs

The robustness of control systems with respect to model uncertainty is considered using simple frequency domain criteria. Available and new results are derived under a common framework in which the minimum singular value of the return difference transfer matrix is the key quantity. In particular, robustness results associated with multivariable control systems designed on the basis of linear-quadratic (LQ) and the linear-quadratic Gaussian (LQG) design methodologies are presented.

Lehtomaki, N. A.↗
NASA NTRS1981

Multivariable Nyquist criteria, root loci, and pole placement - A geometric viewpoint

A description is given of what are considered to be the natural multivariable analogs of concepts from classical control theory. A satisfactory generalization of the Nyquist criterion is described, and a clear analog of the asymptotic properties of the root locus is obtained in the 'multiparameter' case. An example is given, however, which illustrates the quite surprising fact that the root locus map is not always continuous at infinite gains. It is noted that this calls for a new ingredient, a compactification of the space of gains, and that what is the most interesting new feature in this circle of ideas comes in the area of pole placement.

Brockett, R. W.↗
NASA NTRS1982

Multivariable root loci on the real axis

Some methods for determining the number of branches of multivariable root loci which are located on the real axis at a given point are obtained by using frequency domain methods. An equation for the number of branches is given for the general case, and simpler results for the special cases when the transfer function G(s) has size 2 x 2, and when G(s) is symmetric, are also presented.

Yagle, A. E.↗
NASA NTRS1980

Sensor failure and multivariable control for airbreathing propulsion systems

A new sensor/actuator failure analysis technique for turbofan jet engines was developed. Three phases of failure analysis, namely detection, isolation, and accommodation are considered. Failure detection and isolation techniques are developed by utilizing the concept of Generalized Likelihood Ratio (GLR) tests. These techniques are applicable to both time varying and time invariant systems. Three GLR detectors are developed for: (1) hard-over sensor failure; (2) hard-over actuator failure; and (3) brief disturbances in the actuators. The probability distribution of the GLR detectors and the detectability of sensor/actuator failures are established. Failure type is determined by the maximum of the GLR detectors. Failure accommodation is accomplished by extending the Multivariable Nyquest Array (MNA) control design techniques to nonsquare system designs. The performance and effectiveness of the failure analysis technique are studied by applying the technique to a turbofan jet engine, namely the Quiet Clean Short Haul Experimental Engine (QCSEE). Single and multiple sensor/actuator failures in the QCSEE are simulated and analyzed and the effects of model degradation are studied.

Behbehani, K.↗
NASA NTRS1982

Solution of nonlinear multivariable constrained systems using a gradient projection digital algorithm that is insensitive to the initial state

Optimal digital control of nonlinear multivariable constrained systems was studied. The optimal controller in the form of an algorithm was improved and refined by reducing running time and storage requirements. A particularly difficult system of nine nonlinear state variable equations was chosen as a test problem for analyzing and improving the controller. Lengthy analysis, modeling, computing and optimization were accomplished. A remote interactive teletype terminal was installed. Analysis requiring computer usage of short duration was accomplished using Tuskegee's VAX 11/750 system.

Hargrove, A.↗
NASA NTRS1983

Design of multivariable feedback control systems via spectral assignment

The applicability of spectral assignment techniques to the design of multivariable feedback control systems was investigated. A fractional representation design procedure for unstable plants is presented and illustrated with an example. A computer aided design software package implementing eigenvalue/eigenvector design procedures is described. A design example which illustrates the use of the program is explained.

Mielke, R. R.↗
NASA NTRS1983

Equations for the angles of arrival and departure for multivariable root loci using frequency-domain methods

Frequency domain methods are developed to obtain explicit equations for the angles of arrival and departure for multivariable root loci. The techniques involve an evaluation of polynomials formulated within the transfer function matrix. The equations defined require simpler computations than the state-space results of Shaked (1976). A class of higher order poles and zeros is formulated in terms of simpler equations than Shaked's, and the equations are shown to be generalizations of the single-input-single-output root locus equations.

Yagle, A. E.↗
NASA NTRS1981

Problems in the application of multivariable adaptive control to flexible spacecraft

The present investigation is concerned with the application of adaptive control to distributed parameter systems (DPS) which arise in the modeling of large space structures (LSS). Distributed parameter and multivariable models for LSS are introduced and the decoupled adaptive control of such models is considered. Possibilities to achieve adaptive control in connection with a more general model are also examined. It is found that, in concept, adaptive control appears to be a natural choice for solving attitude and shape perturbation problems in LSS. However, due to the distributed parameter nature of such structures and the current lack of experience in their control, the problem must be phrased in general terms which are very difficult to deal with. In particular, detailed a priori plant knowledge is currently required so that decoupling and/or reduced order models of sufficient accuracy can be provided.

Lawrence, D. A.↗
NASA NTRS1984

Reconfigurable multivariable control law for commercial airplane using a direct digital output feedback design

The ability of a pilot to reconfigure the control surfaces on an airplane after a failure, allowing the airplane to recover to a safe condition for landing, becomes more difficult with increasing airplane complexity. Techniques are needed to stabilize and control the airplane immediately after a failure, allowing the pilot time to make longer range decisions. This paper shows a design of a discrete multivariable control law using four controls for the longitudinal channel of a B-737. Single control element failures are allowed in three of the four controls. The four controls design and failure cases are analyzed by means of a digital airplane simulation, with regard to tracking capability and ability to overcome severe windshear and turbulence during the aproach and landing phase of flight.

Ostroff, A. J.↗
NASA NTRS1984

Identification of multivariable high-performance turbofan engine dynamics from closed loop data

A typical engine control design cycle consists of developing a dynamic engine simulation from steady-state component performance data, designing a control based upon this simulation, and then testing and modifying the control in an engine test cell to meet performance requirements. This design cycle was successful for state-of-the-art engines. However, for more advanced multivariable engines that exhibit strong variable interactions, this procedure will result in substantial trial and error modification of the control during the testing phase. One method to automate the design process and reduce control modification testing and development cost would be to identify accurate dynamic models directly from the closed-loop test data. These identified models would then be used in conjunction with a synthesis procedure to systematically refine the control. Recent advances in closed-loop identifiability present a methodology for this direct identification of engine model dynamics from closed-loop test data. The application of an identification method to simulated and actual closed-loop F100 engine data is described. This study was undertaken to determine if useful dynamic engine models could be identified directly from closed-loop engine test data.

Merrill, W. C.↗
NASA NTRS1984

Multivariate optimum interpolation of surface pressure and winds over oceans

The observations of surface pressure are quite sparse over oceanic areas. An effort to improve the analysis of surface pressure over oceans through the development of a multivariate surface analysis scheme which makes use of surface pressure and wind data is discussed. Although the present research used ship winds, future versions of this analysis scheme could utilize winds from additional sources, such as satellite scatterometer data.

Bloom, S. C.↗