Search NASA⌕ Search

SEARCH · Search NASA

Results for “observability analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Spacecraft Formation Control: Managing Line-of-Sight Drift Based on the Dynamics of Relative Motion

In a quest to improve space-based observational capability, an increasing number of investigators are proposing missions with precision formation flying architectures. Typical missions include the Micro- Arcsecond X-ray Imaging Mission (MAXIM), Stellar Imager (SI), and the New Worlds Observer (NWO). Missions designed to explore targets in deep-space generally require holding a formation configuration fixed in inertial space during science observation. Analysis in this paper is specifically aimed at the NWO architecture, characterizing the natural drift of the line-of-sight and the separation range for two spacecraft operating in the vicinity of the Earth/Moon-Sun L(sub 2) libration point. Analysis employs a linear form of the relative dynamics associated with an n-body gravity field. The study is designed to identify favorable observation directions, characterized by minimal line-of-sight drift, along the mission timeline.

Luquette, Richard J.↗
DOE OSTI2026

Understanding the structural and morphological effects of synthesis route on NpO 2

The availability of actinide standard materials for use in nuclear safeguard applications is critical, as is thorough characterization thereof. Although accurate trace element compositions and isotopic considerations are paramount for deployment of reference standards, structural characterization is also essential towards accurately describing the chemical form and potential matrix effects in candidate materials. Here, to this end, samples of NpO 2 were synthesized via a direct denitration (DD) method and probed with powder X-ray diffraction (PXRD), Raman spectroscopy, and scanning electron microscopy (SEM) for structural and morphological characterization and comparison with NpO 2 materials produced via modified direct denitration (MDD). PXRD confirmed the bulk identity of NpO 2 , and no additional phases were identified using this method. Analysis of Raman data collected using a 532 nm excitation wavelength indicates that samples are mostly phase pure; however, some variability in spectral features is observed. Analysis of additional spectroscopic data collected with a 785 nm excitation wavelength revealed variability in the relative intensity of spectral features. Raman spectroscopy indicates that the sample is primarily NpO 2 ; however, additional signals indicate possible structural disorder, oxidized species, or potential contributions from other Np phases. To further investigate the possibility of additional phase contributions within the sample of NpO 2 , Raman spectroscopic mapping was employed to examine the homogeneity of the sample produced via DD. From this analysis, we determined that despite variability in the intensity of Raman-active vibrational modes, consistent spectra are obtained throughout the area of the sample investigated. SEM images show aggregates with variable sizes and shapes, with rounded, primary particles possessing an average diameter of approximately 100 nm. Comparison of the results of these multimodal analyses to the literature indicates that the crystal chemical, spectroscopic, and microstructural properties of NpO 2 vary based on synthesis method, even if X-ray diffraction data indicate that the bulk phase is NpO 2 .

Direct denitration↗
DOE OSTI2022

Estimating Cosmological Constraints from Galaxy Cluster Abundance using Simulation-Based Inference

Inferring the values and uncertainties of cosmological parameters in a cosmology model is of paramount importance for modern cosmic observations. In this paper, we use the simulation-based inference (SBI) approach to estimate cosmological constraints from a simplified galaxy cluster observation analysis. Using data generated from the Quijote simulation suite and analytical models, we train a machine learning algorithm to learn the probability function between cosmological parameters and the possible galaxy cluster observables. The posterior distribution of the cosmological parameters at a given observation is then obtained by sampling the predictions from the trained algorithm. Our results show that the SBI method can successfully recover the truth values of the cosmological parameters within the 2σ limit for this simplified galaxy cluster analysis, and acquires similar posterior constraints obtained with a likelihood-based Markov Chain Monte Carlo method, the current state-of the-art method used in similar cosmological studies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Bayesian inference analysis of jet quenching using inclusive jet and hadron suppression measurements

The JETSCAPE Collaboration reports a new determination of the jet transport parameter $\hat{q}$ in the quark-gluon plasma (QGP) using Bayesian inference, incorporating all available inclusive hadron and jet yield suppression data measured in heavy-ion collisions at the BNL Relativistic Heavy Ion Collider (RHIC) and the CERN Large Hadron Collider (LHC). This multi-observable analysis extends the previously published JETSCAPE Bayesian inference determination of $\hat{q}$, which was based solely on a selection of inclusive hadron suppression data. jetscape is a modular framework incorporating detailed dynamical models of QGP formation and evolution, and jet propagation and interaction in the QGP. Virtuality-dependent partonic energy loss in the QGP is modeled as a thermalized weakly coupled plasma, with parameters determined from Bayesian calibration using soft-sector observables. This Bayesian calibration of $\hat{q}$ utilizes active learning, a machine-learning approach, for efficient exploitation of computing resources. The experimental data included in this analysis span a broad range in collision energy and centrality, and in transverse momentum. In order to explore the systematic dependence of the extracted parameter posterior distributions, several different calibrations are reported, based on combined jet and hadron data; on jet or hadron data separately; and on restricted kinematic or centrality ranges of the jet and hadron data. Tension is observed in comparison of these variations, providing new insights into the physics of jet transport in the QGP and its theoretical formulation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2009

Demonstration of Effects on Tropical Cyclone Forecasts with a High Resolution Global Model from Variation in Cumulus Convection Parameterization

The Goddard Earth Observing System Model, Version 5 (GEOS-5) is a system of models that have been developed at Goddard Space Flight Center to support NASA's earth science research in data analysis, observing system modeling and design, climate and weather prediction, and basic research. The work presented used GEOS-5 with 0.25o horizontal resolution and 72 vertical levels (up to 0.01 hP) resolving both the troposphere and stratosphere, with closer packing of the levels close to the surface. The model includes explicit (grid-scale) moist physics, as well as convective parameterization schemes. Results will be presented that will demonstrate strong dependence in the results of modeling of a strong hurricane on the type of convective parameterization scheme used. The previous standard (default) option in the model was the Relaxed Arakawa-Schubert (RAS) scheme, which uses a quasi-equilibrium closure. In the cases shown, this scheme does not permit the efficient development of a strong storm in comparison with observations. When this scheme is replaced by a modified version of the Kain-Fritsch scheme, which was originally developed for use on grids with intervals of order 25 km such as the present one, the storm is able to develop to a much greater extent, closer to that of reality. Details of the two cases will be shown in order to elucidate the differences in the two modeled storms.

Miller, Timothy L.↗
DOE OSTI2017

A novel approach for reducing toxic emissions during high temperature processing of electronic waste

Highlights: • Volatile heavy metals are generally present in electronic waste constituents. • Potentially toxic elements released during e-waste heat treatment. • Metal particulates/fumes in outgoing gases were removed by alumina adsorbent. • Pb, Sn, Cu and Zn particulates were successfully captured by alumina. •Toxicity of emissions from e-waste was reduced significantly in this approach. - Abstract: A novel approach is presented to capture some of the potentially toxic elements (PTEs), other particulates and emissions during the heat treatment of e-waste using alumina adsorbents. Waste PCBs from mobile phones were mechanically crushed to sizes less than 1 mm; their thermal degradation was investigated using thermo-gravimetric analysis. Observed weight loss was attributed to the degradation of polymers and the vaporization of organic constituents and volatile metals. The sample assembly containing PCB powder and adsorbent was heat treated at 600 °C for times ranging between 10 and 30 min with air, nitrogen and argon as carrier gases. Weight gains up to ∼17% were recorded in the adsorbent thereby indicating the capture of significant amounts of particulates. The highest level of adsorption was observed in N{sub 2} atmosphere for small particle sizes of alumina. SEM/EDS results on the adsorbent indicated the presence of Cu, Pb, Si, Mg and C. These studies were supplemented with ICP-OES analysis to determine the extent of various species captured as a function of operating parameters. This innovative, low-cost approach has the potential for utilization in the informal sector and/or developing countries, and could play a significant role in reducing toxic emissions from e-waste processing towards environmentally safe limits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Initial results from a mesoscale atmospheric simulation system and comparisons with the AVE-SESAME I data set

The development of a comprehensive mesoscale atmospheric simulation system (MASS) is described in detail. The modeling system is designed for both research and real-time forecast applications. The 14-level numerical model, which has a 48 km grid mesh, can be run over most of North America and the adjacent oceanic regions. The model employs sixth-order accurate numerics, generalized similarity theory boundary-layer physics, a sophisticated cumulus parameterization scheme, and state of the art analysis and initialization techniques. Examples of model output on the synoptic and subsynoptic scales are presented for the AVE-SESAME I field experiment on 10-11 April 1979. The model output is subjectively compared to the observational analysis and the LFM II output on the synoptic scale. Subsynoptic model output is compared to analyses generated from the AVE-SESAME I data set.

Kaplan, M. L.↗
NASA NTRS1993

Cloud properties from the analysis of AVHRR observations for FIRE 2

Preliminary results are presented for cloud properties from the analysis of AVHRR observations for FIRE 2. The properties were obtained from a combination of the spatial coherence method and a multispectral retrieval scheme. Geographically gritted fields for the number of cloud layers were produced. For single layered cloud systems, fractional cloud cover, cloud emission temperature, cloud emissivity, and particle size were retrieved. Statistics on the properties of upper-level clouds and the Coffeeville cloud conditions are presented.

Lin, Xijian↗
DOE OSTI2017

Increased Quasi Stationarity and Persistence of Winter Ural Blocking and Eurasian Extreme Cold Events in Response to Arctic Warming. Part I: Insights from Observational Analyses

Abstract Part I of this study examines the relationship among winter cold anomalies over Eurasia, Ural blocking (UB), and the background conditions associated with Arctic warming over the Barents and Kara Seas (BKS) using reanalysis data. It is found that the intensity, persistence, and occurrence region of UB-related Eurasian cold anomalies depend strongly on the strength and vertical shear (VS) of the mean westerly wind (MWW) over mid–high-latitude Eurasia related to BKS warming. Observational analysis reveals that during 1951–2015 UB days are 64% (54%) more frequent during weak MWW (VS) winters, with 26.9 (28.4) days per winter, than during strong MWW (VS) winters. During weak MWW or VS winters, as frequently observed during 2000–15, persistent and large UB-related warming is seen over the BKS together with large and widespread midlatitude Eurasian cold anomalies resulting from increased quasi stationarity and persistence of the UB. By contrast, when the MWW or VS is strong as frequently observed during 1979–99, the cold anomaly is less intense and persistent and confined to a narrow region of Europe because of a rapid westward movement of the strong UB. For this case, the BKS warming is relatively weak and less persistent. The midlatitude cold anomalies are maintained primarily by reduced downward infrared radiation (IR), while the surface heat fluxes, IR, and advection all contribute to the BKS warming. Thus, the large BKS warming since 2000 weakens the meridional temperature gradient, MWW, and VS, which increases quasi stationarity and persistence of the UB (rather than its amplitude) and then leads to more widespread Eurasian cold events and further enhances the BKS warming.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Observational Study of the Thermodynamics and Morphological Characteristics of a Midlatitude Continental Cold Pool Event

Abstract Convectively generated cold pools are important to the Earth system as they exert strong controls on deep convective-storm initiation, intensity, and life cycle. Despite their importance, efforts to introduce such cold pool controls into weather and climate models lack guidance and/or physical constraints from cold pool observations. This work presents a detailed, purely observational analysis of a cold pool event that took place on 23–24 May 2011 in north-central Oklahoma. The characteristics of the cold pool, and the spatiotemporal evolution of the hydrometeors and dynamics in the proximity of the cold pool, are studied with high-resolution observations. The unprecedented dataset used in this work to study cold pool characteristics includes an enhanced network of surface weather stations, a high-temporal-frequency sounding array, and the NEXRAD and Atmospheric Radiation Measurement (ARM) Southern Great Plains radar networks. The potential use of NEXRAD surveillance scans to estimate height and propagation speed of the leading edge of the cold pool (LECP) is presented in this work. Manual identification and tracking of the LECP from NEXRAD imagery shows a spatial and temporal heterogeneity of the LECP properties. Surprisingly, over its detected life cycle, the LECP speed remains almost constant, even though the strength of the cold pool diminishes in time and its height varies. Radar analysis shows that pulses of graupel and hail within downdrafts in the convective system generating the cold pool appeared to be related to temporary increases in the LECP height.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Flow Regime Transitions and Pressure Drop in Gas-Liquid Flows through Packed Beds in Microgravity

The Packed Bed Reactor Experiment (PBRE) focused on the hydrodynamics of gas-liquid flow in porous media, specifically on flow regime transition and pressure drop correlation. The reactor included a cylindrical test section of 60 cm in length, 5 cm in diameter and filled with 2 mm spherical glass beads. Liquid water and Nitrogen gas were flowed into a centrifugal phase separator after exiting the test section. Five absolute pressure transducers and two high-speed video cameras spanned the test section to measure the pressure drop and capture flow regime behavior. Video observations, analysis of pressure traces, and pressure drop data were used to identify flow patterns. It was found that the slope of pressure gradient data when plotted versus the gas or liquid Reynolds numbers changed when the flow regime changed. This observation was used to identify the flow regime boundaries. At high liquid flow rates (high interaction regime), dispersed bubble and pulse flow regimes were detected. At low liquid flow rates (low interaction regime), large bubble and gas channeling regimes were observed. The transition from the big bubble regime to the gas channeling regime occurred at a critical gas flow rate independent of the liquid flow rate. Similarly, the transition from the low interaction to the high interaction regime occurred at a critical liquid flow rate. For these different flow regimes, different two-phase flow friction factors and pressure gradient correlations were fitted as a function of the gas and liquid modified Reynolds numbers and Suratman number. It was found that in all the flow regimes the capillary contribution to the pressure drop is significant and can be as high as 90% of the total pressure drop.

Brian Motil↗
DOE OSTI2021

AGGREGATE: dAta-driven modelinG preservinG contRollable dEr for outaGe mAnagemenT and rEsiliency (Final Report)

The AGGREGATE project team successfully developed and validated various modules for outage management. Brief summaries of each module are provided to showcase their strength for outage management and restoration for a distribution system with a high penetration of connected distribution energy resources (DERs). In recent years, inverter-based DERs have been widely deployed in distribution system. A most of behind-the-meter (BTM) solar power generation is not visible to the utility. The data-driven DER and load estimation modules are using machine learning (ML) and artificial intelligence (AI) to manage this issue, which provides an opportunity for distribution system operators (DSOs) to operate systems and make decisions in real-time for a distribution system with a high penetration of DERs deployed. Also, the estimated DER and true load can be further leveraged in network aggregation and cold-load pick up estimation for reducing the computing complexity and providing for fast restoration. After load demand and DER power generations have been estimated, the information will support topology and state estimation (SE). The topology estimation module demonstrated the viability of mixed integer linear programming (MILP) formulation to estimate the most likely operational radial topology and outage sections using power flow measurements, historical/estimated load and DERs data and smart meter ping measurements. Formulation includes continuous (power flow, load and DERs data) and binary measurements (smart meter ping measurements) in a single formulation. Errors in continuous data and binary data are modeled as normal distribution and Bernoulli distribution, respectively. In the future distribution grid, the power injection from controllable DERs will be essential for efficient and resilient grid operation. However, determining the optimal DER injections and restoration actions is dependent on knowledge of the system states. State estimation (SE), already the cornerstone of transmission energy management systems, will become commonplace in distribution management systems as more measurements become available from deployment of automated metering infrastructure (AMI). Observability analysis is the first step in SE, as it determines the sufficiency of the available measurements for accurately estimating the current system states. A new type of pseudo-measurement called a Correlational Measurement (CM) is introduced in this module, to enhance the observability of the system to enable more accurate SE. CMs encapsulate knowledge of correlation between demand patterns for similar classes of loads as well as injection patterns for same-technology renewable DERs. During grid contingency scenarios, DERs have been traditionally disconnected, without any fault ride-through capabilities. However, with new regulations and better technology, it is feasible for these resources to contribute to the grid’s restoration after an adverse event and hence enhance resilience. The controllability module proposes a two-step restoration scheme for the power system restoration process by leveraging additional degrees of freedom in power electronics interfaced DERs for mitigating voltage problems. In a resilience mode without the utility system, the distribution grid relies on DERs to serve critical load. In such a severe event with multiple faults on the distribution feeders, actuation of various protective devices (PDs) divides the distribution system into electrical islands. The undetected actuated PDs due to fault current contributions from DERs can delay the restoration process, thereby reducing the system resilience. The Advanced Outage Management (AOM) and the Advanced Feeder Restoration (AFR) modules developed in this project provide improved system resilience with multiple DERs. AOM identifies the faulted sections and actuated PDs in a distribution system with DERs by incorporating smart meter data. The most credible outage scenario including fault locations, PD actuations, and fault indicator (FI) failures is identified by a set of binary integer linear programming incorporating hypotheses. The AFR module serves to restore a distribution system with available energy resources taking into consideration the availability of utility sources and DERs. By partitioning the system into islands, critical load will be served with the available generation resources within islands based on the solution of a MILP. When the utility systems become available, the optimal path will be determined by a spanning tree search algorithm that reconnects these islands back to substations and restores the remaining load. The transmission and distribution (T&D) co-simulation module was used to validate the effect of a control action performed on the distribution side assets as it propagates to the transmission side. This ensures that the control action performed results in a feasible operating point on both the transmission and the distribution system. In addition to validation, the team used the T&D co-simulation module to demonstrate how distribution system assets can be used to mitigate issues on the transmission system. Specifically, the team demonstrated that appropriate switching operations on the distribution side can alleviate the line overload condition on the transmission side without causing new operational constraint violations.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Time Resolved Reflectivity Measurements of Convective Clouds

National Aeronautics and Space Administration's Investigations of Convective Updrafts (INCUS) mission aims to document convective mass flux through changes in the radar reflectivity (ΔZ) in convective cores captured by a constellation of three Ka-band radars sampling the same convective cells over intervals of 30, 90, and 120 s. Here, high spatiotemporal resolution observations of convective cores from surface-based radars that use agile sampling techniques are used to evaluate aspects of the INCUS measurement approach using real observations. Analysis of several convective cells confirms that large coherent ΔZ structure with measurable signal (>5 dB) can occur in less than 30 s and are correlated with underlying convective motions. The analysis indicates that the INCUS mission radar footprint and along track sampling are adequate to capture most of the desirable ΔZ signals. This unique demonstration of reflectivity time-lapse provides the framework for estimating convective mass flux independent from Doppler techniques with future radar observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Atmospheric teleconnection associated with the Atlantic multidecadal variability in summer: assessment of the CESM1 model

Observational analysis shows that the Atlantic multidecadal variability (AMV) is associated with climate variability in the Northern Hemisphere through a zonal atmospheric teleconnection extending from the North Atlantic Ocean and propagating eastward around the Northern Hemisphere. Here, we studied the fidelity of model simulations in reproducing the observed summer AMV and the associated impacts on the mid-latitude climate by analysing simulations using the National Centre for Atmospheric Research Community Earth System Model Version 1 (CESM1), including CESM1 North Atlantic idealized and pacemaker simulations, CESM1 large ensemble twentieth century uninitialized simulations and large ensemble initialized CESM1 decadal predictions. To further compare the fidelity of CESM1, we also analysed large ensemble simulations from three other models. Our results suggest that the uninitialized large ensemble simulations from all models can produce an AMV time evolution and its regional climate impacts similar to the observations to certain degree. By initializing the observed oceanic condition in decadal prediction simulations, the simulated AMV and its regional impacts are closer to the observed ones than those in uninitialized ensemble simulations. In addition, the pacemaker simulations that nudged the time-evolving observed North Atlantic sea surface temperature anomalies produce spatiotemporal characteristics of the AMV and AMV climate impacts closer to the observed ones than the uninitialized simulations. We conclude that although coupled models can produce AMV and its regional impacts similar to observed, proper initialization and bias correction of the sea surface temperature spatial and temporal structure can improve this capability.

Initialization↗
DOE OSTI2018

Unusually warm Indian Ocean sea surface temperatures help to arrest development of El Nino in 2014

In early 2014, strong westerly wind bursts (WWBs) and high heat content in the equatorial Pacific favored development of a major El Niño. However, significant coupling between the Pacific Ocean and atmosphere failed to take hold during boreal summer of 2014 such that only borderline El Niño conditions were evident by the end of the year. Observational analysis suggests that warm sea surface temperatures (SSTs) in the Indian Ocean in 2014 weakened westerly wind anomalies in the Pacific and may have helped to arrest the development of the El Niño. We test this hypothesis using an ensemble of coupled numerical experiments in which observed Indian Ocean SST anomalies in 2014–15 are prescribed but the Pacific Ocean-atmosphere system is free to evolve. Results confirm that warm SST anomalies in the Indian Ocean created conditions that would have favored a weakening of El Niño by suppressing the Bjerknes feedback in boreal summer of 2014. Furthermore, this process does not preclude others that have been proposed in the unusual evolution of El Niño SSTs in 2014, but it adds to the list a forcing mechanism external to the Pacific basin.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2003

Meridional Propagation of the MJO/ISO and Asian Monsoon Variability

In this study we examine the links between tropical heating, the Madden Julian Oscillation (MJO)/Intraseasonal Oscillation (ISO), and the Asian monsoon. We are particularly interested in isolating the nature of the poleward propagation of the ISO/MJO in the monsoon region. We examine both observations and idealized "MJO heating" experiments employing the NASA Seasonal-Interannual Prediction Project (NSIPP) atmospheric general circulation model (AGCM). In the idealized 10-member ensemble simulations, the model is forced by climatological SST and an idealized eastward propagating heating profile that is meant to mimic the canonical heating associated with the MJO in the Indian Ocean and western Pacific. In order to understand the impact of SST on the off equatorial convection (or Rossby-wave response), a second set of 10-member ensemble simulations is carried out with the climatological SSTs shifted in time by 6-months. The observational analysis highlights the strong link between the Indian summer monsoon and the tropical ISO/MJO activity and heating. This includes the well-known meridional propagation that affects the summer monsoons of both hemispheres. The AGCM experiments with the idealized eastward propagating MJO-like heating reproduce the observed meridional propagation including the observed seasonal differences. The impact of the SSTs are to enhance the magnitude of the propagation into the summer hemispheres. The results suggest that the winter/summer differences associated with the MJO/ISO are auxiliary features that depend on the MJO's environment (basic state and boundary conditions) and are not the result of fundamental differences in the MJO itself.

Wu, Man Li C.↗
NASA NTRS1989

Analysis and modeling of summertime convective cloud and precipitation structure over the Southeastern United States

Data analysis and numerical modeling efforts that are related to the 1986 Satellite Precipitation and Cloud Experiment (SPACE) are discussed. Progress during this period includes the following: further testing and development of the RAMS numerical modeling system on the Alabama CRAY X-MP/24; a continuation of the observational analysis of the 13 July 1986 mesoscale convective system (MCS); and an initial investigation of a small MCS that formed over the COHMEX region on 15 July 1986. Details for each of these individual tasks are given.

Knupp, Kevin R.↗