Search NASA⌕ Search

SEARCH · Search NASA

Results for “particle distributions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Quasi-linear theory via the cumulant expansion approach

The cumulant expansion technique of Kubo was used to derive an intergro-differential equation for f , the average one particle distribution function for particles being accelerated by electric and magnetic fluctuations of a general nature. For a very restricted class of fluctuations, the f equation degenerates exactly to a differential equation of Fokker-Planck type. Quasi-linear theory, including the adiabatic assumption, is an exact theory for this limited class of fluctuations. For more physically realistic fluctuations, however, quasi-linear theory is at best approximate.

Jones, F. C.↗
NASA NTRS1975

When is quasi-linear theory exact

We use the cumulant expansion technique of Kubo (1962, 1963) to derive an integrodifferential equation for the average one-particle distribution function for particles being accelerated by electric and magnetic fluctuations of a general nature. For a very restricted class of fluctuations, the equation for this function degenerates exactly to a differential equation of Fokker-Planck type. Quasi-linear theory, including the adiabatic assumption, is an exact theory only for this limited class of fluctuations.

Jones, F. C.↗
NASA NTRS1986

Local variation of haze thickness on the equatorial region of Venus

The horizontal distribution of haze particles in the equatorial region of Venus was investigated using selected polarimetry maps obtained by the Orbiter Cloud Photopolarimeter (OCP) aboard the Pioneer Venus Orbiter, with five of these maps having been acquired on five consecutive terrestrial days. Nine sets of OCP polarimetry maps (PM) similar to PM 16 employed by Kawabata et al. (1980) were selected, and 935 nm data points were extracted to construct a cloud-haze model, from which the haze fraction f(h) within the cloud and the corresponding optical thickness tau(h) were determined for the period from December 1978 to October 1980. The results indicate that, in this period, the upper cloud layer of Venus had haze layers with tau(h) of about 0.02. Furthermore, the submicron particles present within the principal cloud contributed approximately 6 percent to the total scattering cross section per unit volume. Although no systematic time variations in the derived values of tau(h) and f(h) were noticeable, the consecutive five day observations indicated a presence of a large-scale horizontal inhomogeneity in haze particle distribution.

Kawabata, Kiyoshi↗
NASA NTRS1987

On the acceleration of charged particles at relativistic shock fronts

The diffusive acceleration of highly relativistic particles at a shock is reconsidered. Using the same physical assumptions as Blandford and Ostriker (1978), but dropping the restriction to nonrelativistic shock velocities, the authors find approximate solutions of the particle kinetic equation by generalizing the diffusion approximation to higher order terms in the anisotropy of the particle distribution. The general solution of the transport equation on either side of the shock is constructed, which involves the solution of an eigenvalue problem. By matching the two solutions at the shock, the spectral index of the resulting power law is found by taking into account a sufficiently large number of eigenfunctions. Low-order truncation corresponds to the standard diffusion approximation and to a somewhat more general method described by Peacock (1981). In addition to the energy spectrum, the method yields the angular distribution of the particles and its spatial dependence.

Kirk, J. G.↗
NASA NTRS2005

Automated Counting of Particles To Quantify Cleanliness

A machine vision system, similar to systems used in microbiological laboratories to count cultured microbes, has been proposed for quantifying the cleanliness of nominally precisely cleaned hardware by counting residual contaminant particles. The system would include a microscope equipped with an electronic camera and circuitry to digitize the camera output, a personal computer programmed with machine-vision and interface software, and digital storage media. A filter pad, through which had been aspirated solvent from rinsing the hardware in question, would be placed on the microscope stage. A high-resolution image of the filter pad would be recorded. The computer would analyze the image and present a histogram of sizes of particles on the filter. On the basis of the histogram and a measure of the desired level of cleanliness, the hardware would be accepted or rejected. If the hardware were accepted, the image would be saved, along with other information, as a quality record. If the hardware were rejected, the histogram and ancillary information would be recorded for analysis of trends. The software would perceive particles that are too large or too numerous to meet a specified particle-distribution profile. Anomalous particles or fibrous material would be flagged for inspection.

Rhode, James↗
NASA NTRS2005

Particle Size Distributions Measured in the B757 Engine Plume During EXCAVATE

The Experiment to Characterize Aircraft Volatile Aerosols and Trace Species Emissions (EXCAVATE) took place at NASA Langley Research Center during January 2002. This ground based study was conducted to examine the role of fuel sulfur content on particulate emissions. Size distributions as a function of engine operating conditions were measured in the exhaust plume of a B-757 at four downstream axial locations (1 m, 10 m, 25 m and 35 m). The engine was run on JP-5 with three different sulfur concentrations, 810 ppm, 1050 ppm, 1820 ppm; and was operated over a range of power settings from idle to near-full power. Zalabsky differential-mobility analyzers DMAS), Met One condensation-nuclei counters (CNCs), and a TSI 3022 condensation-particle counter (CPC) were used to measure the size distributions. The total number-count (particle concentration), number-based Emissions Index (EInumber) and mass-based Emissions Index (E1-J increased with fuel sulfur-content and engine pressure ratio (EPR). Count Mean Diameter (Ch4D) also increased with EPR yet remained fairly constant with fuel sulfur-content for a fixed location in the exhaust plume. Also the mode and CMD both increased with distance in the plume.

Sanders, Terry↗
NASA NTRS1987

Synchrotron emission and gamma-ray bursts

The parameter space within which synchrotron emission models for gamma-ray burst spectra are valid is evaluated in the cases of thermal and power-law particle distributions. The spectra emitted by noncooling and cooling thermal and power-law particle distributions are modeled numerically over relativistic and nonrelativistic regimes. The structure of the radiation is defined near the fundamental and the continuum up to the 1000th harmonic. Comparisons are made with burst event data collected during the Apollo 16, Venera, SMM, Pioneer Venus Orbiter and Hackucho missions. A two-component synchrotron model is proposed for gamma-ray burst events. The electron-positron distribution is projected to have a thermal component and a nonthermal power-law tail.

Brainerd, J. J.↗
DOE OSTI2022

Poor confinement in stellarators at high energy

High-energy particle resonances can modify particle distributions and even cause significant particle loss. Resonances can be present in any toroidal confinement device and can easily be found numerically. Many stellarators have weak magnetic shear so that large islands and large chaotic regions can be produced by resonant perturbations with small amplitudes. Additionally, while the choice of the field line helicity profile in the plasma can limit the presence of resonances at low particle energy, the resonance location is energy-dependent, and they can move into the plasma at higher energy. If resonances match the toroidal variation of the equilibrium, they can produce wide islands in the phase space of orbits even in the absence of perturbations due to instabilities. These islands increase in size with particle energy and can seriously affect the confinement of high-energy ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1992

Particle size distributions in Arctic polar stratospheric clouds, growth and freezing of sulfuric acid droplets, and implications for cloud formation

The paper uses particle size and volume measurements obtained with the forward scattering spectrometer probe model 300 during January and February 1989 in the Airborne Arctic Stratospheric Experiment to investigate processes important in the formation and growth of polar stratospheric cloud (PSC) particles. It is suggested on the basis of comparisons of the observations with expected sulfuric acid droplet deliquescence that in the Arctic a major fraction of the sulfuric acid droplets remain liquid until temperatures at least as low as 193 K. It is proposed that homogeneous freezing of the sulfuric acid droplets might occur near 190 K and might play a role in the formation of PSCs.

Dye, James E.↗
NASA NTRSDate not supplied

Metallic Powder Core Tubular Wire (PCTW) Development for Additive Manufacturing

NASA Langley Research Center (LaRC) in Hampton, VA, and the Center for Welding, Joining, and Coating Research (CWJCR) in the Department of Metallurgical and Materials Engineering at the Colorado School of Mines (CSM) in Golden, CO, have collaborated for nearly fifteen years to develop metallic powder core tubular wire (PCTW) feedstock for additive manufacturing (AM) using electron beam deposition. The motivation for this development was to offset dealloying observed during deposition of titanium and aluminum alloy solid wire feedstock in the LaRC electron beam freeform fabrication (EBF3) system and to explore novel alloy compositions by tailoring the powder fill. EBF3 is a fusion-based AM process that is performed under vacuum and is consequently prone to vaporization loss of low vapor pressure alloying elements. Research spanning four graduate student research projects succeeded in developing the basic methodology to fabricate PCTW, the mass balance equations used to define the powder fill, microstructure control through particulate inoculation, and the feasibility of producing metal matrix composite materials. Metallic PCTW is comprised of a thin foil sheath wrapped around a powder blend. Fabrication of PCTW at CSM was accomplished using a tubular wire mill system to first bend a flat strip into a u-shaped cross section, deposit a powder fill, create a lap joint to seal the wire, and draw to final diameter. Powder management systems were developed to ensure uniform mixing of powder constituents and identify feed rates for optimum fill ratios. Processing parameters were successfully developed for titanium and aluminum alloy sheaths to account for material work hardening during drawing. Mass balance equations were developed to account for compositional contributions of the sheath and powder fill. PCTW composition can be adjusted through selection of the sheath or powder materials. PCTWs were successfully developed to offset Al loss in deposits of Ti-6-4 and Mg loss in Al 6061, resulting in deposits that were within the composition limits for each material. Ti-6-4 deposits were fabricated using PCTW comprised of commercially pure (CP) titanium sheath and a fill of pre-alloyed Ti-6-4 powder with additions of elemental Al and V powders. Additions of both elements were required to account for the CP Ti from the sheath, and Al was further enhanced to offset documented losses in EBF3 deposits. For Al 6061 deposits, composition was modulated through the choice of sheath material. The PCTW was made using an Al 5052 sheath to supplement Mg content and a fill composition of pre-alloyed 6061 powder with additions of Si and Cu.The slower solidification rate of the EBF3 process compared with laser powder bed fusion processes can lead to coarse-grained microstructures and mechanical property anisotropy. EBF3deposits of Ti-6-4 exhibited large epitaxially grown β grains, which result in degraded mechanical properties in the deposition direction. Microstructure refinement was achieved through a combination of electron beam modulation and the use of a PCTW designed for Ti-6-4 deposits and modified by the addition of powder made from Fe and B. Resulting deposits exhibited reductions in β grain size, α phase colony intercept length and lath width, and an increased volume fraction of β phase. The mechanism of microstructure refinement was related to precipitation of boride particles. Hardness testing confirmed that mechanical property anisotropy was reduced and an overall increase in hardness was achieved.Metal matrix composite (MMC) materials offer strength and stiffness benefits over unreinforced materials. Two methods were investigated using PCTW technology for producing Al 6061 basedMMC materials; the direct addition of SiC reinforcing particles and the in-situ generation of reinforcements through reaction synthesis of precursor powders. Al 6061 based MMCs reinforced with SiC exhibited particle clustering and formation of aluminum carbides during deposition. The application of a Ni coating to the SiC particles prior to incorporation into the powder fill eliminated aluminum carbide formation and aided particle distribution during deposition. Modulation of beam focus and power further reduced aluminum carbide formation and aided particle distribution. In reaction synthesis, precursor additions undergo an exothermic reaction during deposition to form new ceramic products, generally of finer scale than the initial precursor components. The product phases provide reinforcement in the MMC and act as nucleation sites during solidification, resulting in grain refinement, improved mechanical properties, and reduced susceptibility to solidification cracking. Higher tensile strength and stiffness were demonstrated in Al 6061 based MMCs with 2 vol% reinforcement. These combined research efforts demonstrate the potential of PCTW technology for customizing of alloy composition and achieving microstructure control. A manufacturing process for titanium- and aluminum-based PCTWs was developed based on iterative design, theoretical calculations, and empirical data. PCTW technology successfully mitigated Al loss from Ti-6-4 and Mg loss in Al 6061, resulted in grain refinement in Ti-6-4, and demonstrated fabrication of Al based MMCs

Marcia S Domack↗
NASA NTRS1981

Spatial distribution of energetic particles in the distant magnetotail

The spatial distribution of energetic particles in the distant magnetotail is analyzed by using identical sets of two complementary energetic particle experiments aboard the IMP 7 and 8 spacecraft. It is noted that the combined IMP 7 and 8 data set provides nearly 10 years of satellite observation. The quantitative distributions of energetic electrons in two energy ranges and energetic protons are given in terms of occurrence frequency and the average particle flux intensity over an 80 earth radii x 70 earth radii plane perpendicular to the sun-earth line. A particle distribution in the shape of an O with a crossbar over the solar magnetospheric YZ plane in the antisolar direction is clearly demonstrated at all energies and for both species. It is pointed out that the O part of the distribution corresponds to the magnetosheath region and that the crossbar is the average plasma sheet configuration. A distinct, species dependent, dawn-dusk asymmetry in particle distribution is observed in the plasma sheet and, to a lesser extent, in the magnetosheath.

Meng, C.-I.↗
NASA NTRS1994

Magnetic field waves at Uranus

The research efforts funded by the Uranus Data Analysis Program (UDAP) grant to the Bartol Research Institute (BRI) involved the study of magnetic field waves associated with the Uranian bow shock. Upstream wave studies are motivated as a study of the physics of collisionless shocks. Collisionless shocks in plasmas are capable of 'reflecting' a fraction of the incoming thermal particle distribution and directing the resulting energetic particle motion back into the upstream region. Once within the upstream region, the backward streaming energetic particles convey information of the approaching shock to the supersonic flow. This particle population is responsible for the generation of upstream magnetic and electrostatic fluctuations known as 'upstream waves', for slowing the incoming wind prior to the formation of the shock ramp, and for heating of the upstream plasma. The waves produced at Uranus not only differed in several regards from the observations at other planetary bow shocks, but also gave new information regarding the nature of the reflected particle populations which were largely unmeasurable by the particle instruments. Four distinct magnetic field wave types were observed upstream of the Uranian bow shock: low-frequency Alfven or fast magnetosonic waves excited by energetic protons originating at or behind the bow shock; whistler wave bursts driven by gyrating ion distributions within the shock ramp; and two whistler wave types simultaneously observed upstream of the flanks of the shock and argued to arise from resonance with energetic electrons. In addition, observations of energetic particle distributions by the LECP experiment, thermal particle populations observed by the PLS experiment, and electron plasma oscillations recorded by the PWS experiment proved instrumental to this study and are included to some degree in the papers and presentations supported by this grant.

Smith, Charles W.↗
NASA NTRS1985

Second-order Compton-Getting effect on arbitrary intensity distribution

Theoretical studies of energetic particles in space are often referred to a special frame of reference. To compare theory with experiment, one has to transform the particle distribution from the special frame to the observer's frame, or vice versa. Various methods have been derived to obtain the directional distribution in the comoving frame from the directional fluxes measured on a spacecraft. These methods have become progressively complicated as increasingly detailed directional particle data become available. A set of 2nd order correct formulae for the transformation of an arbitrary differential intensity distribution, expressed as a series of spherical harmonics, between any two frames in constant relative motion is presented. These formulae greatly simplify the complicated procedures currently in use for the determination of the differential intensity distribution in a comoving frame.

Ng, C. K.↗
NASA NTRS2005

Particle acceleration magnetic field generation, and emission in Relativistic pair jets

Plasma waves and their associated instabilities (e.g., the Buneman instability, two-streaming instability, and the Weibel instability) are responsible for particle acceleration in relativistic pair jets. Using a 3-D relativistic electromagnetic particle (REMP) code, we have investigated particle acceleration associated with a relativistic pair jet propagating through a pair plasma. Simulations show that the Weibel instability created in the collisionless shock accelerates particles perpendicular and parallel to the jet propagation direction. Simulation results show that this instability generates and amplifies highly nonuniform, small-scale magnetic fields, which contribute to the electron's transverse deflection behind the jet head. The "jitter' I radiation from deflected electrons can have different properties than synchrotron radiation which is calculated in a uniform magnetic field. This jitter radiation may be important to understanding the complex time evolution and/or spectral structure in gamma-ray bursts, relativistic jets, and supernova remnants. The growth rate of the Weibel instability and the resulting particle acceleration depend on the magnetic field strength and orientation, and on the initial particle distribution function. In this presentation we explore some of the dependencies of the Weibel instability and resulting particle acceleration on the magnetic field strength and orientation, and the particle distribution function.

Nishikawa, K.-I.↗
NASA NTRS1983

A theoretical model study of observed correlations between whistler mode waves and energetic electron precipitation events in the magnetosphere

A recently extended test particle computer model of the gyroresonance wave-particle interaction in the magnetosphere is applied to previously reported cases of observed correlations between whistler mode waves and ionospheric responses to particle precipitation. Three different ionospheric effects, namely, X-ray bursts, photoemissions, and D region perturbations, all correlated with VLF waves and believed to be caused by precipitated particles, are considered. The precipitation flux level, the pulse shape, and the associated time delays are computed for the parameters relevant to each case and are compared with values deduced from the data. The results demonstrate that the existing theoretical model can be useful for interpreting experimental results of this kind. Furthermore, the model results and observations, used together, provide a basis for additional diagnostics of the various parameters of the cold and energetic particle distributions in the magnetosphere. For example, when applied to the observed photoemission case (Helliwell et al., 1980) the model results imply that the trapped energetic particle distribution function at the time could be modeled as proportional to E exp -n/2 with n about 3.5 to 6, where E is the particle energy.

Chang, H. C.↗
DOE OSTI2023

Plasma Wave and Particle Dynamics During Interchange Events in the Jovian Magnetosphere Using Juno Observations

Abstract Interchange instability is known to drive fast radial transport of particles in Jupiter's inner magnetosphere. Magnetic flux tubes associated with the interchange instability often coincide with changes in particle distributions and plasma waves, but further investigations are required to understand their detailed characteristics. We analyze representative interchange events observed by Juno, which exhibit intriguing features of particle distributions and plasma waves, including Z‐mode and whistler‐mode waves. These events occurred at an equatorial radial distance of ∼9 Jovian radii on the nightside, with Z‐mode waves observed at mid‐latitude and whistler‐mode waves near the equator. We calculate the linear growth rate of whistler‐mode and Z‐mode waves based on the observed plasma parameters and electron distributions and find that both waves can be locally generated within the interchanged flux tube. Our findings are important for understanding particle transport and generation of plasma waves in the magnetospheres of Jupiter and other planetary systems.

Geology↗
NASA NTRS1983

Electrostatic waves and anomalous transport in the solar wind

In situ measurements of fluctuation spectra and particle distribution functions have now been carried out throughout interplanetary space. The link between these observations is established by theories of wave particle interaction. Linear instability analysis for the actual nonMaxwellian particle distribution functions and an examination of the velocity dependence of microscopic diffusion coefficients form the basis of such an investigation. It is described in more detail for the short wavelength, ion acoustic like turbulence which is found by linear instability analysis to correspond to the observed electrostatic fluctuations. Of the transport processes associated with these fluctuations, electron heat conduction and electron ion energy transfer are of particular importance for macroscopic solar wind expansion. These effects are studied with the aid of an anomalous transport theory. This theory (Dum, 1978 a,b) is based on the dominance of elastic scattering of electrons by fluctuations, similar to (enhanced) electron ion collisions. It has a much wider range of applicability than classical transport theory, which assumes dominance of Coulomb collisions for elastic and inelastic scattering.

Dum, C. T.↗
NASA NTRS2022

The Extended Field-Aligned Suprathermal Proton Beam and Long-Lasting Trapped Energetic Particle Population Observed Upstream of a Transient Interplanetary Shock

The properties of the suprathermal particle distributions observed upstream of interplanetary shocks depend not only on the properties of the shocks but also on the transport conditions encountered by the particles as they propagate away from the shocks. The confinement of particles in close proximity to the shocks, as well as particle scattering processes during propagation to the spacecraft, lead to the common observation of upstream diffuse particle distributions. We present observations of a rare extended anisotropic low-energy(≤30 keV)proton beam together with a trapped ≥500 keV proton population observed in association with the arrival of an oblique interplanetary shock at the Advanced Composition Explorer, the Interplanetary Monitoring Platform-8, and the Wind spacecraft on 2001 January 31. Continuous injection of particles by the traveling shock into a smooth radial magnetic field region formed in the tail of a modest high-speed solar wind stream produced an extended foreshock region of energetic particles. The absence of enhanced magnetic field fluctuations upstream of the shock results in the observation of a prolonged anisotropic field-aligned beam of ≤30 keV protons as well as a population of higher-energy(≥500 keV)protons with small pitch-angle cosine(μ∼0)extending far from the shock.

D. Lario↗