Passive gravity gradient libration dampers
Book on passive gravity gradient libration dampers covering design, flight experience, evaluation criteria, performance monitoring, failure prevention, etc
Herzl, G. G.↗
SEARCH · Search NASA
Results for “performance monitoring”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Capillary matrix and fuel cell development study, appendix Final report
Small module test benches for monitoring performance evaluation parameters
Michel, R.↗
Airlock caution and warning system
Caution and warning system, used to monitor performance and warn of hazards or out-of-limit conditions on space vehicles, may have application to aircraft and railway transit systems. System consists of caution and warning subsystem and emergency subsystem.
Mayfield, W. J.↗
Precision closed bomb calorimeter for testing flame and gas producing initiators
A calorimeter has been developed under this study to help meet the needs of accurate performance monitoring of electrically or mechanically actuated flame and gas producing devices, such as squib-type initiators. A ten cubic centimeter closed bomb (closed volume) calorimeter was designed to provide a standard pressure trace and to measure a nominal 50 calorie output, using the basic components of a Parr Model 1411 calorimeter. Two prototype bombs were fabricated, pressure tested to 2600 psi, and extensively evaluated.
Carpenter, D. R., Jr.↗
Advance crew procedures development techniques: Procedures generation program requirements document
The Procedures Generation Program (PGP) is described as an automated crew procedures generation and performance monitoring system. Computer software requirements to be implemented in PGP for the Advanced Crew Procedures Development Techniques are outlined.
Arbet, J. D.↗
Thruster endurance test
A test system was built and several short term tests were completed. The test system included, in addition to the 30-cm ion thruster, a console for powering the thruster and monitoring performance, a vacuum facility for simulating a space environment, and a storage and feed system for the thruster propellant. This system was used to perform three short term tests (one 100-hour and two 500-hour tests), an 1108-hour endurance test which was aborted by a vacuum facility failure, and finally the 10,000-hour endurance test. In addition to the two 400 series thrusters which were used in the short term and 1100-hour tests, four more 400 series thrusters were fabricated, checked out, and delivered to NASA. Three consoles similar to the one used in the test program were also fabricated and delivered.
Collett, C.↗
Field operations with cesium clocks in HF navigation systems
Networks of HF phase comparison marine navigation stations employing cesium clocks are discussed. The largest permanent network is in the Gulf of Mexico where some fourteen base stations are continuously active and others are activated as needed. These HF phase comparison systems, which operate on a single transmission path, require a clock on the mobile unit as well. Inventory consists of upwards of 70 clocks from two different manufacturers. The maintenance of this network as an operating system requires a coordinated effort involving clock preparation, clock environment control, station performance monitoring and field service.
Christy, E. H.↗
The P-POD Project
The programmable pilot oriented display (P-POD), a multiprocessor based flight information processing and display unit, is discussed. Communication protocols between the three Z-80 processors inside P-POD are reviewed. The interface between the video processor, P2, and the main processor, P1, was tested. Hardware and software were revised. Data flow between P1 and P2 is illustrated. While running diagnostic routines to exercise the P1/P2 interface at maximum speed an intermittent failure was observed. A check of possible noise sources or race conditions in the hardware did not reveal the source of this failure. Possible software timing problems were also fully investigated. To eliminate the effects of this type of failure a performance monitor routine was used to detect these occasional failures and correct them. The data transmission cycle between P1/P2 is either allowed to continue normal operation or is re-initialized and restarted when an error is detected.
Littlefield, J. A.↗
Thematic Mapper Image Processing System (TIPS) Processing Status
Radiometric and geometric correction performance is considered. A one quantum level requirement was met in all spectral bands with an occasional band 7 exception. Initial post launch calibration was accomplished. An absolute radiometric calibration is in progress including an investigation of low impact solution to scan striping. Initial and three downstream updates as well as coordination with LANDSAT D' instrument calibration are planned. Methods and problems in measuring geometric correction performance are examined with an emphasis on temporal registration, geodetic registrtion, and the modeling error budget. Planned efforts include eliminating band 2, band 5 chips; continued performance monitoring; calibration of profile, misalignment angles, and filer parameters; studying the need for seasonal geodetic control points; and improvement of the subpixel correlation technique.
Brooks, J.↗
Algorithm development for a spacecraft autonomous power system
Two algorithms were developed to demonstrate the implementation of autonomous functions in an existing spacecraft power system. The functions selected for autonomous operation include a typical performance monitoring function, battery state of charge, and a fault detection and response function represented by a battery state of charge below a preselected limit. The constraints imposed by the existing power system configuration are the available data in the telemetry stream and the existing commands and command structure. The areas requiring future development are the degree of battery characterization, the effects of hardware/software faults, and the verification of faults.
Bridgeforth, A. O.↗
NASA Deep Space Network operating control
The primary function of the Deep Space Network (DSN) is to provide effective and reliable tracking and data acquisition for planetary and interplanetary space flight missions. This involves providing data to flight project mission operations, accepting commands from mission operations and transmitting the commands to stations and spacecraft, and providing a record of telemetry and command data to mission operations. Also included are network performance monitoring, the generation of predictions for antenna pointing and signal acquisition, network scheduling, and network validation tests. Descriptions are given of the three facilities and six systems of the DSN. Also described are interfaces, automation and standardized procedures, and discrepancy reporting. It is pointed out that the greatest challenge facing the DSN is the implementation of NASA's Network Consolidation Program, which is scheduled to be completed in 1986. The objectives of this program are enumerated.
Weisman, W. D.↗
The Introduction of New Cockpit Technology: A Human Factors Study
A joint Airline/NASA field study of B-767 training and operations was conducted during the period this aircraft was being introduced into line service. The objectives of the study were: (1) to identify any adverse reactions to the new technology; (2) to provide a clearing house of information for the airlines and pilots during the introductory period; (3) to provide feedback on airline training programs for the new aircraft; and (4) to provide field data to NASA and other researchers to help them develop principles of human interaction with automated systems. It is concluded that: (1) a large majority of pilots enjoy flying the B-767 more than the older aircraft; (2) pilots accept new cockpit technology and find it useful; (3) pilots are aware of the potential loss of flying skills because of automation, and take steps to prevent this from happening; (4) autopilot/autothrottle interactions and FMS operations were sometimes confusing or surprising to pilots, and they desired more training in this area; and (5) highly automated cockpits can result in a loss of effective monitoring performance.
Curry, R. E.↗
Force/Torque Display For Telerobotic Systems
Pictorial cathode-ray-tube (CRT) display of force and/or torque (F/T) data for telerobotic systems used as output monitor from multiaxis sensor or as command display. Relative positions of two circles represent forces and torques acting on object, derived from signals from F/T sensor composed of strain gauges. Graphical presentation generated on two different graphics systems, one in color and one in black and white. High-level programming facilitates use of additional convenient features in software extending usefulness of sensor data and display. Useful in laboratory experiments, monitoring performance of automated system and for present data on status of system to operator at control station.
Wise, Marion A.↗
Hierarchical representation and machine learning from faulty jet engine behavioral examples to detect real time abnormal conditions
The theoretical basis and operation of LEBEX, a machine-learning system for jet-engine performance monitoring, are described. The behavior of the engine is modeled in terms of four parameters (the rotational speeds of the high- and low-speed sections and the exhaust and combustion temperatures), and parameter variations indicating malfunction are transformed into structural representations involving instances and events. LEBEX extracts descriptors from a set of training data on normal and faulty engines, represents them hierarchically in a knowledge base, and uses them to diagnose and predict faults on a real-time basis. Diagrams of the system architecture and printouts of typical results are shown.
Gupta, U. K.↗
Fiber Optic Tactical Local Network (FOTLAN)
A 100 Mbit/s FDDI (fiber distributed data interface) network interface unit is described that supports real-time data, voice and video. Its high-speed interrupt-driven hardware architecture efficiently manages stream and packet data transfer to the FDDI network. Other enhancements include modular single-mode laser-diode fiber optic links to maximize node spacing, optic bypass switches for increased fault tolerance, and a hardware performance monitor to gather real-time network diagnostics.
Bergman, L. A.↗
A software control system for the ACTS high-burst-rate link evaluation terminal
Control and performance monitoring of NASA's High Burst Rate Link Evaluation Terminal (HBR-LET) is accomplished by using several software control modules. Different software modules are responsible for controlling remote radio frequency (RF) instrumentation, supporting communication between a host and a remote computer, controlling the output power of the Link Evaluation Terminal and data display. Remote commanding of microwave RF instrumentation and the LET digital ground terminal allows computer control of various experiments, including bit error rate measurements. Computer communication allows system operators to transmit and receive from the Advanced Communications Technology Satellite (ACTS). Finally, the output power control software dynamically controls the uplink output power of the terminal to compensate for signal loss due to rain fade. Included is a discussion of each software module and its applications.
Reinhart, Richard C.↗
Advanced Transport Operating System (ATOPS) color displays software description: MicroVAX system
This document describes the software created for the Display MicroVAX computer used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery of February 27, 1991, known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global references section includes subroutines, functions, and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight Cathode Ray Tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.
Slominski, Christopher J.↗
Advanced Transport Operating System (ATOPS) color displays software description microprocessor system
This document describes the software created for the Sperry Microprocessor Color Display System used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global reference section includes procedures and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight cathode ray tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.
Slominski, Christopher J.↗