Search NASA⌕ Search

SEARCH · Search NASA

Results for “plasma shaping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Imaging nuclei by smashing them at high energies: how are their shapes revealed after destruction?

High-energy nuclear collisions have recently emerged as a promising ‘imaging-by-smashing’ approach to reveal the intrinsic shapes of atomic nuclei. Here, I outline a conceptual framework for this technique, explaining how nuclear shapes are encoded during quark–gluon plasma (QGP) formation and evolution, and how they can be decoded from final-state particle distributions. Furthermore, I highlight the method’s potential to advance our understanding of both nuclear structure and QGP physics.

imaging by smashing↗
DOE OSTI2024

Multifrequency Analysis of Favored Models for the Messier 87* Accretion Flow

Abstract The polarized images of the supermassive black hole Messier 87* (M87*) produced by the Event Horizon Telescope (EHT) provide a direct view of the near-horizon emission from a black hole accretion and jet system. The EHT theoretical analysis of the polarized M87* images compared thousands of snapshots from numerical models with a variety of spins, magnetization states, viewing inclinations, and electron energy distributions, and found a small subset consistent with the observed image. In this article, we examine two models favored by EHT analyses: a magnetically arrested disk with moderate retrograde spin and a magnetically arrested disk with high prograde spin. Both have electron distribution functions that lead to strong depolarization by cold electrons. We ray trace five snapshots from each model at 22, 43, 86, 230, 345, and 690 GHz to forecast future very long baseline interferometry (VLBI) observations and examine limitations in numerical models. We find that even at low frequencies where optical and Faraday rotation depths are large, approximately rotationally symmetric polarization persists, suggesting that shallow depths dominate the polarization signal. However, morphology and spectra suggest that the assumed thermal electron distribution is not adequate to describe emission from the jet. We find 86 GHz images show a ringlike shape determined by a combination of plasma and spacetime imprints, smaller in diameter than recent results from the Global mm-VLBI Array. We find that the photon ring becomes more apparent with increasing frequency, and is more apparent in the retrograde model, leading to large differences between models in asymmetry and polarization structure.

Astronomy & Astrophysics↗
DOE OSTI2025

Comparing XRISM Cluster Velocity Dispersions with Predictions from Cosmological Simulations: Are Feedback Models Too Ejective?

The dynamics of the intracluster medium (ICM), the hot plasma that fills galaxy clusters, are shaped by gravity-driven cluster mergers and feedback from supermassive black holes (SMBHs) in the cluster cores. XRISM measurements of ICM velocities in several clusters offer insights into these processes. We compare XRISM measurements for nine galaxy clusters (Virgo, Perseus, Centaurus, Hydra-A, PKS 0745–19, A2029, Coma, A2319, and Ophiuchus) with predictions from three state-of-the-art cosmological simulation suites, TNG-Cluster, the Three Hundred Project GADGET-X, and GIZMO-SIMBA, that employ different models of feedback. In cool cores, XRISM reveals systematically lower velocity dispersions than the simulations predict, with all 10 measurements below the median simulated values by a factor of 1.5–1.7 on average and all falling within the bottom 10% of the predicted distributions. The observed kinetic-to-total pressure ratio is also lower, with a median value of 2.2%, compared to the predicted 5.0%–6.5% for the three simulations. Outside the cool cores and in non-cool-core (NCC) clusters, simulations show better agreement with XRISM measurements, except for the outskirts of the relaxed, cool-core cluster A2029, which exhibits an exceptionally low kinetic pressure support (<1%), with none of the simulated systems in either of the three suites reaching such low levels. The NCC Coma and A2319 exhibit dispersions at the lower end but within the simulated spread. Our comparison suggests that the three numerical models may overestimate the kinetic effects of SMBH feedback in cluster cores. Additional XRISM observations of NCC clusters will clarify if there is a systematic tension in the gravity-dominated regime as well.

galaxy clusters↗
DOE OSTI2021

Elaboration of Metallic Materials by SPS: Processing, Microstructures, Properties, and Shaping

After a few decades of increasing interest, spark plasma sintering (SPS) has now become a mature powder metallurgy technique, which allows assessing its performances toward fabricating enhanced materials. Here, the case of metals and alloys will be presented. The main advantage of SPS lies in its rapid heating capability enabled by the application of high intensity electric currents to a metallic powder. This presents numerous advantages balanced by some limitations that will be addressed in this review. The first section will be devoted to sintering issues, with an emphasis on the effect of the electric current on the densification mechanisms. Then, typical as-SPS microstructures and properties will be presented. In some cases, they will be compared with that of materials processed by conventional techniques. As such, examples of nanostructured materials, intermetallics, metallic glasses, and high entropy alloys, will be presented. Finally, the implementation of SPS as a technique to manufacture complex, near-net shape industrial parts will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Surface modification of polymer foams using plasma

An embodiment includes a system comprising: a monolithic shape memory polymer (SMP) foam having first and second states; wherein the SMP foam includes: (a) polyurethane, (b) an inner half portion having inner reticulated cells defined by inner struts, (c) an outer half portion, having outer reticulated cells defined by outer struts, surrounding the inner portion in a plane that provides a cross-section of the SMP foam, (d) hydroxyl groups chemically bound to outer surfaces of both the inner and outer struts. Other embodiments are discussed herein.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Neural net modeling of equilibria in NSTX-U

Neural networks (NNs) offer a path towards synthesizing and interpreting data on faster timescales than traditional physics-informed computational models. In this work we develop two NNs relevant to equilibrium and shape control modeling, which are part of a suite of tools being developed for the National Spherical Torus Experiment-Upgrade for fast prediction, optimization, and visualization of plasma scenarios. The networks include Eqnet, a free-boundary equilibrium solver trained on the EFIT01 (Equilibrium FITtting 01) reconstruction algorithm, and Pertnet, which is trained on the Gspert code and predicts the non-rigid plasma response, a nonlinear term that arises in shape control modeling. The NNs are trained with different combinations of inputs and outputs in order to offer flexibility in use cases. In particular, Eqnet can use magnetic diagnostics as inputs and act as an EFIT-like reconstruction algorithm, or, by using pressure and current profile information the NN can act as a forward Grad–Shafranov equilibrium solver. This forward-mode version is envisioned to be implemented in the suite of tools for simulation of plasma scenarios. The reconstruction-mode version gives some performance improvements compared to the online reconstruction code real-time EFIT, especially when vessel eddy currents are significant. Here, we report strong performance for all NNs indicating that the models could reliably be used within closed-loop simulations or other applications. Some limitations are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Expansion dynamics of femtosecond laser-induced plasmas: Influence of thermophysical plasma properties

This study investigates the expansion dynamics of femtosecond laser-induced plasmas, emphasizing the impact of plasma thermophysical properties and ambient gas composition. Through shadowgraphy experiments and multiphase computational fluid dynamics (CFD) simulations, the influence of parameters such as heat capacity, molecular weight, and thermal conductivity on plume morphology, shockwave evolution, and energy dissipation mechanisms is examined. A mixture multiphase model is implemented to capture the interaction between the plasma and the surrounding gas. Simulation results reveal that plasma expansion is strongly inertia-driven. Results show that differences in plasma properties and ambient conditions affect the shape and temperature distribution of the expanding plume. The early-stage dynamics are primarily dictated by pressure forces, whereas thermal and viscous effects play a growing role in the plume's behavior during later stages of expansion. The CFD findings show the necessity of accurate initial condition characterization, including crater geometry and plasma pressure and temperature, for reliable modeling of plasma evolution in laser ablation processes.

CFD modeling↗
DOE OSTI2026

Electron-impact ionization from excited states method

We present a distorted-wave with exchange (DWE) formulation for computing electron-impact ionization (EII) cross sections within the recently developed excited states method (ESM) for plasmas. The ESM provides a self-consistent quantum-mechanical description of both bound and continuum electronic states in dense plasmas, incorporating finite-temperature and screening effects absent in isolated-atom approaches. Using this framework, we calculate EII cross sections for lithium across a wide range of temperatures and densities. We show that the ESM reproduces the isolated-atom limit at low densities while capturing strong plasma effects, such as pressure ionization and shape resonances, at solid density. Comparisons with isolated-atom DWE and average-atom (AA) calculations reveal that, although AA cross sections can approximate configuration average behavior, the ESM provides more accurate, state-resolved answers. In conclusion, these results demonstrate that the ESM allows one to obtain rate coefficients for collisional-radiative modeling of plasmas out of local thermodynamical equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Achievement of highly radiating plasma in negative triangularity and effect of reactor-relevant seeded impurities on confinement and transport

The first achievement of highly radiating plasmas in negative triangularity (NT) is shown with an operational space featuring high core radiation at high Greenwald fraction obtained with the injection of reactor-relevant seeded gases. These NT shape diverted discharges reach high values of normalized plasma pressure ( β N > 2) at high radiation fraction with no edge localized modes (ELMs) and a simultaneous reduction of the divertor heat flux. Here, we demonstrate that as long as the impurity level in the core is kept low to avoid excessive fuel dilution and impurity accumulation, integration of NT configuration with high radiation fraction not only is achievable but it can lead to confinement improvement with stabilization effects originating from collisionality, E × B shear and profiles changes due to impurity radiation cooling. The underlying physics mechanism is robust and reproducible and holds for a variety of impurity species. The absence of the requirement to stay in H-mode translates in a higher core radiation fraction potentially allowed in NT shape effectively mitigating the power exhaust issue. The results presented here demonstrate a path to high performance, ELM free and highly radiative regime with reactor-relevant seeding gases making this regime a potential new scenario for reactor design.

confinement improvement↗
DOE OSTI2024

Overview of results from the 2023 DIII-D negative triangularity campaign

Negative triangularity (NT) is a potentially transformative configuration for tokamak-based fusion energy with its high-performance core, edge localized mode (ELM)-free edge, and low-field-side divertors that could readily scale to an integrated reactor solution. Previous NT work on the TCV and DIII-D tokamaks motivated the installation of graphite-tile armor on the low-field-side lower outer wall of DIII-D. A dedicated multiple-week experimental campaign was conducted to qualify the NT scenario for future reactors. During the DIII-D NT campaign, high confinement ($H_\mathrm{98y,2}\gtrsim$ 1), high current ($q_\mathrm{95} \lt$ 3), and high normalized pressure plasmas ($\beta_\mathrm{N} \gt$ 2.5) were simultaneously attained in strongly NT-shaped discharges with average triangularity $\delta_\mathrm{avg}$ = −0.5 that were stably controlled. Experiments covered a wide range of DIII-D operational space (plasma current, toroidal field, electron density and pressure) and did not trigger an ELM in a single discharge as long as sufficiently strong NT was maintained; in contrast, to other high-performance ELM-suppression scenarios that have narrower operating windows. These strong NT plasmas had a lower outer divertor X-point shape and maintained a non-ELMing edge with an electron temperature pedestal, exceeding that of typical L-mode plasmas. Also, the following was achieved during the campaign: high normalized density ($n_\mathrm{e}$/$n_\mathrm{GW}$ of at least 1.7), particle confinement comparable to energy confinement with $Z_\mathrm{eff}\sim2$ , a detached divertor without impurity seeding, and a mantle radiation scenario using extrinsic impurities. These results are promising for a NT fusion pilot plant but further questions on confinement extrapolation and core-edge integration remain, which motivate future NT studies on DIII-D and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Surface modification of polymer foams using plasma

An embodiment includes a system comprising: a monolithic shape memory polymer (SMP) foam having first and second states; wherein the SMP foam includes: (a) polyurethane, (b) an inner half portion having inner reticulated cells defined by inner struts, (c) an outer half portion, having outer reticulated cells defined by outer struts, surrounding the inner portion in a plane that provides a cross-section of the SMP foam, (d) hydroxyl groups chemically bound to outer surfaces of both the inner and outer struts. Other embodiments are discussed herein.

Nash, Landon D.↗
DOE OSTI2023

Measuring higher-order moments of neutron-time-of-flight data for cryogenic inertial confinement fusion implosions on OMEGA

Ion temperatures serve as an important diagnostic for inertial confinement fusion (ICF) implosions. In direct-drive ICF experiments on OMEGA, neutron-time-of-flight (nTOF) data are used to infer the ion temperature of the fusing plasma produced in the implosion experiment. The analysis of the nTOF data requires an assumption about the shape of the underlying source signal. Since the source nTOF signal is a near-replica of the neutron energy spectrum, an ideal Gaussian shape, corresponding to the neutron energy spectrum of a uniform temperature plasma, is routinely employed. However, spatial and temporal variations of the ion temperature in the plasma give rise to higher-order moments, which were first described by Munro [Nucl. Fusion 56, 036001 (2016)]. In this work, we show a simpler alternative analysis to derive moments of the neutron energy spectrum for a plasma with variations in ion temperature. We also present a revised analysis of measured nTOF signals that uses a model with an additional degree of freedom to take into account the effect of ion temperature variations on the shape of the spectrum. Compared to presently used nTOF analysis, the revised analysis yields on average ≈2× more accurate fits to the data and up to 15% higher ion temperatures for cryogenic experiments. As a result, we quantify the ion temperature inflation caused by radially symmetric fluid flows, which are present even in a symmetric implosion, and which serve as a lower bound on the ion temperature inflation in real implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The principle of minimal power

This article is devoted to the memory of Yuri P Raizer, who passed away in 2021. He left a noticeable trace in gas discharge physics. The principle of minimal power (the state that requires minimal power is most probable) is thoroughly used in his books. Although the fundamental laws of physics do not imply this ad hoc principle, a detailed analysis of underlying phenomena can often reveal why nature prefers this path. Raizer illustrated this principle for plasma stratification, formation of electrode spots, discharge constriction, the shape of an arc channel, etc. We argue that the nonlinearity of equations describing gas discharges can often justify the realization of a plasma state maintained at minimal electric power. This nonlinearity appears because small groups of energetic electrons often control the ionization processes. The number of these electrons depends strongly on the ratio of the electric field to gas density, E/N. Under certain conditions, the ionization rate can also depend nonlinearly on electron density due to stepwise ionization and Coulomb collisions. Here, we use the principle of minimal power to illustrate some of Raizer's contributions to gas discharge physics from a single point of view. We demonstrate that nonlinearity of ionization processes in gas discharges can substantiate this principle for plasma stratification. However, striations of s, p, and r types in neon could exist with minimal or no ionization enhancement. This reminds us of Raizer's warning that applying the minimal power principle could lead to erroneous predictions, and a proper theory is required in each case to justify its use. 'The phenomenon of striations satisfies the principle of minimal power' – Yuri Raizer

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Project Title: Demonstration High Temperature Superconducting NonPlanar Stellarator Magnet with Advanced Manufactured Assemblies

This is the final report for the project “Demonstration High Temperature Superconducting Non- Planar Stellarator Magnet with Advanced Manufactured Assemblies”, funded by DOE, and performed by Type One Energy from September, 2020, to March 2024 involving the Fusion Technology Institute at the University of Wisconsin–Madison, the Plasma Science and Fusion Center (PSFC) at the Massachusetts Institute of Technology (MIT) and Commonwealth Fusion Systems (CFS) to design and fabricate the first non-planar HTS (REBCO) coil for a high-field stellarator based on the SPARC tokamak’s VIPER cable concept. Stellarators at high fields make high-temperature superconducting magnets necessary for a compact fusion device. But the asymmetric and non-planar nature of its components, especially the magnets make it difficult for scalable producibility. To address these challenges, two promising technologies have emerged: advanced manufacturing (AM) for the supporting plates for forming the magnets, and high-temperature superconducting (HTS) cables inside the plates. AM has advanced enough to produce stellarator components with the necessary geometric complexity, size, and the precision, leading to potentially significant reductions in production time, cost, and waste. The cost of HTS tape has decreased dramatically, and progress in HTS planar magnet development has reached a point where it can be proposed for application to complex 3D non-planar magnets. The main objective of this project is to develop, demonstrate and pre-commercialize a novel, non-planar HTS coil shape that remains superconducting to achieve production scalable reductions in time and cost and performance. The proposed technology is based on the novel concept of a precision sub-scale HTS nonplanar coil assembly. This project focuses on the design, fabrication, material optimization of cable design, and validation and demonstration of the high current carrying capability of superconducting magnets and their support in a complex 3D shape needed for application to stellarator magnetic plasma confinement. The specific objectives of this research program include: (1) The successful application of metal AM to build a precision sub-scale HTS nonplanar coil, (2) An HTS cable and cross-section design that can conform to the required nonplanar coil shape (bend radii as tight as 10-cm) and remains superconducting at an engineering current density of 1.35 kA/cm 2 at 77 K and 1 tesla at the conductor (5 kA in the cable). To achieve the above challenging goals, we have formed a multidisciplinary research team consisting of members from Type One Energy and UW-Madison, MIT PSFC and CFS with complementary skills and strong facilities. The team worked collaboratively on fundamental and applied research on the following three major technical areas: (1) Design, fabrication, and optimization of non-planar HTS Cable The ultimate goal of the project is to determine if commercial REBCO tapes and additive manufacturing can be used to fabricate high field (≥ 10T) non-planar coils with tight bending radii (≃ 100mm) and with a degradation of the critical current (Ic) smaller than 20% with respect to the expected performance. We started with shorter length cable to evaluate the scalability of the production process and eventually reached multiple turns for higher magnetic fields. Our findings suggest that a stellarator coil system of a relevant size, characterized by its asymmetric and non-planar components, can be fabricated using a formed cable in plate method. This system can be simulated using a large-scale modeling approach. The use of hybrid modeling 3 techniques will be pivotal in reducing the complexity of the model and in assessing expected performance in designs. (2) Modeling and simulation of the non-planar HTS Cable Multiphysics simulations are performed using the commercial software and are carried out in self-field conditions, involving 2D and 3D models and twisted around one slot of twist-pitched VIPER cable. Multiphysics simulations are mainly focused on the coil for the critical current evaluation, the magnetic field map, self-Lorentz forces and mechanical, and magnetothermal behavior and the quench dynamics. The detailed model and prediction of the superconducting performance of a stellarator-relevant demonstration cable from numerical simulations supports the results from the actual testing backing the results. A detailed description and results are provided in the later sections. (3) Design, fabrication, and optimization of support for the non-planar HTS Cable The team developed an additive manufactured (AM) coil positioning plate that formed into the required non-planar geometry (with bend radii as tight as 10-cm) and to acceptable tolerances required for a stellarator magnet: (+0.25-mm from ideal on dimensions of coil positioning plates and up to +1-mm from ideal for position of wound coil). The plate materials is also included in this selection process from fabrication and 3D printing perspective and commensurate with eventual application to a fusion reactor. From the cost effectiveness point of view, the HTS coil and plate has the potential to cost less than that made in conventional methods with less waste (<75% waste) reducing time (<50%) and cost (<50%), especially as the AM field matures. The application of advanced manufacturing in the construction of the support plates will also lead to cost reduction, as the cables can be easily replaced, thereby making the assembly modular. With such high primary cost and time savings, high current densities and magnetic field, the funded R&D work has validated the designs, proven the feasibility, and characterized the performance of the HTS coil and plate assembly, paving the way for a relevant-size stellarator coil system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Experimental characterization of discharge plasma dynamics in a square capillary for prospective applications in laser wakefield acceleration

Research on plasma generated by electrical discharge in gas-filled capillaries plays an important role in advancing laser wakefield accelerators. We present a comprehensive study of the temporal and spatial distribution of plasma density within a short, 1 cm long, square-shaped capillary filled with hydrogen gas. Two transverse capillary sizes, 500 μm and 300 μm, were investigated achieving peak plasma densities of 0.9 × 10 18 cm −3 and 2.5 × 10 18 cm −3 , respectively, at the capillary center. In addition, we explore how these distributions depend on discharge parameters, specifically discharge current and gas flow through the capillary. Plasma density was determined by analyzing the Stark broadening of the hydrogen Balmer-alpha line. The results obtained were compared with the theoretical models and simulations. The comparison between the model predictions and the experimental data at the transient ionization stage of the discharge reveals a discrepancy of a factor of ∼1.3–2.1, depending on the capillary size, which is thoroughly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Bayesian optimization of laser wakefield acceleration via spectral pulse shaping

In this paper, we investigate the effect of spectral pulse shaping of the laser driver on the performance of channel-guided, laser–plasma accelerators. The study was carried out with the assistance of Bayesian optimization using particle-in-cell simulations. We used a realistic plasma profile based on a novel optical-field-ionized channel technique with ionization injection and low, on-axis plasma densities to maximize the energy gain of the electron bunch trailing the laser. Spectral shaping allows us to modify the temporal profile of the laser driver while keeping the laser energy constant, affecting the acceleration and injection processes. In addition, we consider how modifying the plasma channel parameters may affect the target outputs. Given the complexity and breadth of the parameter space in question, we used numerical optimization to identify high-performing configurations. In particular, we found laser profiles with additional spectral content that, when used with optimal plasma channel parameters, result in charge content an order of magnitude higher than the baseline Gaussian case while also increasing the mean energy of the electron bunch.

Physics - Plasma physics↗
DOE OSTI2026

Impact of n > 1 neoclassical tearing modes on fast ions, plasma rotation, and the onset of disruptive tearing modes in DIII-D ITER baseline scenario

We present integrated TRANSP-kick analyses quantitatively characterizing how n > 1 magnetic islands redistribute fast ions (FIs) and modify momentum balance in low-torque DIII-D H-mode scenarios operated with the ITER normalized parameter set and shape (ITER baseline scenario, or IBS). In this plasma scenario, disruptive neoclassical tearing modes (NTMs) are most commonly seeded by nonlinear 3-wave coupling when the differential rotation between the q = 1 and q = 2 surfaces ($δf_{1, 2}$) approaches zero. Analysis of a DIII-D IBS database of shots unstable to the 2/1 NTM demonstrates that the flattening rotation profile is correlated with n > 1 NTM amplitude growth, with a strong drop in $δf_{1, 2}$ occurring when the radial magnetic perturbation amplitude at the rational surface ($δB$ r s ) is estimated to be about 20 G. The interpretive TRANSP-kick simulations show that the experimentally observed reduction in core rotation is due to the fast-ion kicks. Nonlinearity in momentum losses versus NTM amplitude is found to be correlated with overlap of FI island chains, occurring when $δB$ r s is about 35 G, in rough agreement with the experimental results. This agreement suggests the primary mechanism for the conductive momentum loss in the core is due to chaotic FI orbits and FI losses developing from overlapping resonant FI island chains.

ITER baseline scenario↗
DOE OSTI2025

Anisotropic Flow in Fixed-Target 208 Pb + 20 Ne Collisions as a Probe of Quark-Gluon Plasma

The System for Measuring Overlap with Gas (SMOG2) at the LHCb detector enables the study of fixed-target ion-ion collisions at relativistic energies ($\sqrt{𝑠_{NN}}$ ∼ 100 GeV in the center of mass). Here, with input from ab initio calculations of the structure of 16 O and 20 Ne , we compute 3+1⁢D hydrodynamic predictions for the anisotropic flow of Pb+Ne and Pb+O collisions to be tested with upcoming LHCb data. This will allow the detailed study of quark-gluon plasma formation as well as experimental tests of the predicted nuclear shapes. Elliptic flow (𝑣 2 ) in Pb + Ne collisions is greatly enhanced compared to the Pb + O baseline due to the shape of 20 Ne , which is deformed in a bowling-pin geometry. Owing to the large 208 Pb radius, this effect is seen in a broad centrality range, a unique feature of this collision configuration. Larger elliptic flow further enhances the quadrangular flow (𝑣 4 ) of Pb + Ne collisions via nonlinear coupling, and impacts the sign of the kurtosis of the elliptic flow vector distribution (𝑐 2 ⁡{4}). Exploiting the shape of 20 Ne proves thus an ideal method to investigate the formation of quark-gluon plasma in fixed-target experiments at LHCb, and demonstrates the power of System for Measuring Overlap with Gas as a tool to image nuclear ground states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗