Search NASA⌕ Search

SEARCH · Search NASA

Results for “polarity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Angular and Polarization Response of Multimode Sensors with Resistive-Grid Absorbers

High sensitivity receiver systems with near ideal polarization sensitivity are highly desirable for development of millimeter and sub-millimeter radio astronomy. Multimoded bolometers provide a unique solution to achieve such sensitivity, for which hundreds of single-mode sensors would otherwise be required. The primary concern in employing such multimoded sensors for polarimetery is the control of the polarization systematics. In this paper, we examine the angular- and polarization- dependent absorption pattern of a thin resistive grid or membrane, which models an absorber used for a multimoded bolometer. The result shows that a freestanding thin resistive absorber with a surface resistivity of eta/2, where eta is the impedance of free space, attains a beam pattern with equal E- and H-plane responses, leading to zero cross polarization. For a resistive-grid absorber, the condition is met when a pair of grids is positioned orthogonal to each other and both have a resistivity of eta/2. When a reflective backshort termination is employed to improve absorption efficiency, the cross-polar level can be suppressed below −30 dB if acceptance angle of the sensor is limited to < or approx. 60deg. The small cross-polar systematics have even-parity patterns and do not contaminate the measurements of odd-parity polarization patterns, for which many of recent instruments for cosmic microwave background are designed. Underlying symmetry that suppresses these cross-polar systematics is discussed in detail. The estimates and formalism provided in this paper offer key tools in the design consideration of the instruments using the multimoded polarimeters.

High sensitivity receiver systems↗

Optical Polarization of Light from a Sorghum Canopy Measured Under Both a Clear and an Overcast Sky

Introduction: We tested the hypothesis that the optical polarization of the light reflected by a sorghum canopy is due to a Fresnel-type redirection, by sorghum leaf surfaces, of light from an unpolarized light source, the sun or overcast sky, toward the measuring sensor. If it can be shown that the source of the polarization of the light scattered by the sorghum canopy is a first surface, Fresnel-type reflection, then removing this surface reflected light from measurements of canopy reflectance presumably would allow better insight into the biochemical processes such as photosynthesis and metabolism that occur in the interiors of sorghum canopy leaves. Methods: We constructed a tower 5.9m tall in the center of a homogenous sorghum field. We equipped two Barnes MMR radiometers with polarization analyzers on the number 1, 3 and 7 Landsat TM wavelength bands. Positioning the radiometers atop the tower, we collected radiance data in 44 view directions on two days, one day with an overcast sky and the other, clear and sunlit. From the radiance data we calculated the linear polarization of the reflected light for each radiometer wavelength channel and view direction. Results and Discussion: Our experimental results support our hypothesis, showing that the amplitude of the linearly polarized portion of the light reflected by the sorghum canopy varied dramatically with view azimuth direction under a point source, the sun, but the amplitude varied little with view azimuth direction under the hemispherical source, the overcast sky. Under the clear sky, the angle of polarization depended upon the angle of incidence of the sunlight on the leaf, while under the overcast sky the angle of polarization depended upon the zenith view angle. These results support a polarized radiation transport model of the canopy that is based upon a first surface, Fresnel reflection from leaves in the sorghum canopy.

cloud cover↗

Is There Ecological Information in Optical Polarization Data?

Optical linear polarization? In remote sensing it's due to specular reflection. The first surface that incident light encounters - a smooth water surface or the waxy first surface of a leaf's cuticle, if it's even somewhat smooth (i.e. shiny) - will specularly reflect and linearly polarize the incident light. We provide three examples of the types of ecological information contained in remotely sensed optical linear polarization measurements. Remove the surface reflection to better see the interior. The linearly polarized light reflected by leaf surfaces contains no information about cellular pigments, metabolites, or water contained in the leaf interiors of a plant canopy, because it never enters the leaf interior to interact with them. Thus, for purposes of remotely sensing the leaf interiors of a plant canopy, the linearly polarized light should be subtracted from the total reflected light, because including it would add noise to the measurement. In particular 'minus specular' vegetation indices should allow improved monitoring of a plant canopy's physiological processes. Estimate plant development stage and yield. Wheat and sorghum grain heads, following emergence, rapidly extend upward and very quickly tower over nearby leaves, partially blocking our view of the sunlight reflected by those leaf surfaces. The resulting decrease in the amount of surface reflected and polarized sunlight, if monitored over time, potentially allows per-field estimates of the dates of the heading and flowering development stages to be interleaved with weather data in models, which is key to better estimating per-field grain yield. Similar polarization changes may occur in other grasses, such as oats, barley, corn and rice, each a crop so widely grown that it potentially affects climate at the regional scale. Wetlands Mapping. The sunlight specularly reflected by surface waters is blindingly bright, spectrally flat and polarized - all of which telegraphs that the ground area is inundated. Inundated soils exchange methane with the atmosphere; non-inundated soils, carbon dioxide. Aquatic plants growing through the water surface pipe the soil-produced methane via the stomata to the atmosphere, enhancing exchanges rates by factors of 10-20 compared to ebullition (bubbling) or diffusion through the water column to the atmosphere. Thus, mapping wetland areas into three community types - inundated areas with emergent vegetation, open water and uplands - provides potentially key information to water, carbon and energy budgets at landscape to global scales.

Water↗

JPSS-2 VIIRS Polarization Sensitivity Performance Comparison with Heritage VIIRS Sensors

The Joint Polar Satellite System 2 (JPSS-2) is the follow-on for the Suomi-National Polar-orbiting Partnership (S-NPP) and Joint Polar Satellite System 1 (JPSS-1) missions. These spacecrafts provide critical weather and global climate products to the user community. A primary sensor on both JPSS and S-NPP is the Visible-Infrared Imaging Radiometer Suite (VIIRS) with Earth observations covering the Reflective Solar Band (RSB), Thermal Emissive Band (TEB) and Day Night Band (DNB) spectral regions. The VIIRS Sensor Data Records (SDRs) contain the calibrated Earth observations that are used in Environmental Data Record (EDR) products such as Ocean Color/Chlorophyll (OCC) and Sea Surface Temperature (SST). This SDR calibration is performed using unpolarized sources such as the Solar Diffuser (SD) for the RSBs and an On-Board Calibrator BlackBody (OBCBB) for the TEBs. Therefore, polarized Earth scenes will have radiometric bias errors within the SDRs based on how sensitive VIIRS is to polarized illumination and is corrected in some EDR algorithms. This paper will discuss the JPSS-2 VIIRS polarization characterization methodology, polarization sensitivity results and compare its performance to its predecessors S-NPP and JPSS-1 VIIRS. Optical modifications to the JPSS-2 VIIRS sensor to address heritage polarization sensitivity issues will be discussed.

S-NPP↗

Assessment of MODIS On-orbit Polarization Impact on Detector Relative Calibration

The Moderate-Resolution Imaging Spectroradiometer (MODIS) has been maintained its nominal operations since it was launched in December 1999 on Terra and May 2002 on Aqua spacecraft, respectively. MODIS is a scanning radiometer with a two-sided mirror that scans the Earth over an angular range from -55° to +55° off nadir and covers a wavelength range from 0.4 to 14.4 μm in 36 spectral bands. The sensitivity to polarization was fully characterized during prelaunch characterization for each reflective solar band (RSB), detector and mirror side as a function of scan angle. It was observed that while on-orbit polarization sensitivity for Aqua MODIS has been stable over the course of mission, the Terra MODIS polarization sensitivity at a few short wavelengths showed a significant increase near the end of scan angle after a few years in the mission. Our previous study examined the impact of polarization on the measured top-of-atmosphere reflectances obtained over the pseudo-invariant desert sites. There are up to 25% change in gain and 30% seasonal variation in select Terra RSBs due to the increase in polarization sensitivity. In this study, we examine relative changes in the polarization sensitivity of detectors within a band. Results from prelaunch tests indicate that there is a noticeable detector dependent polarization sensitivity and it is expected that such a dependency could change on orbit, particularly for Terra MODIS. Results of this study provide useful information on polarization impact and implementation of the correction algorithm.

MODIS↗

Circular Polarization in Atmospheric Aerosols

Recent technological advances have demonstrated the feasibility of deploying spaceborne optical detectors with full polarimetric capabilities. The measurement of all four Stokes coefficients opens significant new opportunities for atmospheric aerosol studies and applications. While considerable amounts of attention have been dedicated to sensors with sensitivity to the total intensity and linear polarization (represented by Stokes coefficients I, U, Q), there has been less attention to the additional information brought by measuring circular polarization (coefficient V). This report fills this gap in knowledge by providing an overview of aerosol sources of circular polarization in the atmosphere and discusses possible remote sensing signatures. In this manuscript, circularly polarized radiation that results from the interaction of incident unpolarized radiation are considered in three physical settings: optical activity originating in biogenic aerosols, alignment of non-spherical particles in the presence of electrical fields (such as dust, smoke, and volcanic ash) and aerosol multiple scattering effects. Observational and theoretical evidence of, and the settings and conditions for non-zero aerosol circular polarization generated from incident unpolarized radiation are here gathered and discussed. In addition, novel radiative transfer simulations are shown to illustrate notable spectral and other features where circular polarization may provide additional information that is possibly independent from total intensity and linear polarization only observations. Current techniques for detection of aerosol composition (also referred as aerosol type) from space provide limited information. Remote identification of aerosols such as smoke, volcanic ash, and dust particles can only be accomplished with some degree of confidence for moderate to high concentrations. When the same aerosols are found at lower concentrations (but still high enough to be of importance for air quality and cloud formation), these methods often produce ambiguous results. The circular polarization of aerosols is rarely utilized, and we explore its value for improved determination aerosol composition. This study is presented as an overview with a goal to provide a new perspective on an overlooked optical property and to trigger interest in further exploration of this subject.

Aerosol type↗

The recovery of polarized apparent temperature distributions of flat scenes from antenna temperature measurements

The reception theory for quasi-monochromatic partially polarized emissions is employed to describe the antenna temperature when observing a flat scene from within or above an absorbing/emitting atmosphere. When the polarization aspects of the antenna and scene are carefully observed, the resulting integral expression for the antenna temperature differs significantly from that reported for polarization invariant temperature distributions. It is observed that the antenna couples to both emitted surface polarizations, and the phase character of the antenna introduces a term involving the product of the polarized and cross-polarized antenna patterns. A matrix approximation of the integral expression is suggested and developed as a means for inverting polarized antenna temperature observations for the underlying partially polarized apparent temperature distributions.

Claassen, J. P.↗

Polarization loss of a satellite - Data collection sensor link

It is noted that the stringent economy of data-collection systems consisting of several widely dispersed satellite-monitored sensor platforms can be partially achieved by using an inexpensive linearly polarized antenna on each platform and that due to Faraday rotation of the ionosphere, the satellite antenna must be circularly polarized to avoid a prohibitive polarization loss. The cumulative probability distribution of polarization loss between a linearly polarized platform antenna and an elliptically polarized satellite antenna is computed for satellite-antenna axial ratios of 3 and 4 dB. The results indicate that a polarization loss of 4.5 dB must be expected for a reliability of 85% and an axial ratio of 3 dB. It is suggested that the conventional assignment of a 3-dB polarization loss to the communication link considered may not insure the required link reliability.

Estep, H.↗

Comparisons of the North Polar Cap of Mars and the Earth's Northern Hemisphere snow cover

The boundaries of the polar caps of Mars have been measured on more than 3000 photographs since 1905 from the plate collection at the Lowell Observatory. For the Earth the polar caps have been accurately mapped only since the mid 1960's when satellites were first available to synoptically view the polar regions. The polar caps of both planets wax and wane in response to changes in the seasons, and interannual differences in polar cap behavior on Mars as well as Earth are intimately linked to global energy balance. In this study data on the year to year variations in the extent of the polar caps of Mars and Earth were assembled and analyzed together with data on annual variations in solar activity to determine if associations exist between these data. It was found that virtually no correlation exists between measurements of Mars north polar cap and solar variability. An inverse relationship was found between variations in the size of the north polar caps of Mars and Earth, although only 6 years of concurrent data were available for comparison.

Foster, J.↗

On the origin of polar ion streams

It is reaffirmed in this reply that the 'classical' polar wind is based on the thermal escape of the light ions H(+) and He(+). It is asserted that the polar ion flow observations presented in the Gurgiolo and Burch (1985) comment paper, made by the High Altitude Plasma Instrument (HAPI) instrument on Dynamics Explorer-1 (DE), are O(+) and that the probable origin of these ions, which is consistent with the observations, is a highly localized region in the dayside polar cleft; this is a distinctly different source region than that of the polar wind. Velocity and mass selection, as a result of E x B convection acting on ions from a localized source region in the polar cusp or the dayside polar cap boundary, determines the measured HAPI ion distribution. The Retarding Ion Mass Spectrometer instrument on DE, during the same time period, was measuring the light ion polar wind with flow energies of less than 2.5 eV which originated in the polar cap ionosphere very near the north magnetic pole.

Green, J. L.↗

Evolution of nonlinear polarization in localized and finite amplitude Alfven waves

Theoretical and computational study for a polarization change of localized and finite amplitude Alfven waves propagating parallel to an applied magnetic field is presented using both reductive perturbation theory and numerical simulations. In the magnetohydrodynamic limit, where right-hand and left-hand circularly polarized waves are degenerate, one of the transverse components of the circularly polarized Alfven wave is stable as it propagates, but the other component is unstable to either self-focusing or diffraction effects. Consequently, the wave changes its polarization from circular to linear. In the high frequency regime, where two circularly polarized waves (right-hand and left-hand circularly polarized waves) are not degenerate, two transverse components of the circularly polarized Alfven wave are strongly coupled to each other, and there is almost no polarization change.

Hoshino, M.↗

Diffraction image formation in optical systems with polarization aberrations. I - Formulation and example

This paper is the first in a series that will examine image formation in optical systems with polarization aberrations. The present paper derives the point-spread function (PSF) and the optical transfer function for optical systems with polarization aberration and explores how image formation depends on the coherence and polarization state of the source. It is shown that the scalar PSF of Fourier optics can be generalized in the presence of polarization aberration to a 4 x 4 point-spread matrix (PSM) in Mueller matrix notation. A similar 4 x 4 optical transfer matrix (OTM) is shown to be an appropriate generalization of the optical transfer function. The PSM and the OTM are associated with the optical system and are independent of the incident polarization state but dependent on the coherence of the illumination. Since an optical system with polarization aberrations will have a different PSF and optical transfer function for different incident polarization states, the PSM and the OTM act as filters with regard to the incident polarization state. Example calculations are performed for a circularly retarding lens.

Mcguire, James P., Jr.↗

Energetic photoelectrons and the polar rain

In the daytime midlatitudes, the Low Altitude Plasma Instrument (LAPI) on board the Dynamics Explorer 2 satellite has observed photoelectrons with energies as high as 850 eV. These energetic photoelectrons are an extension of the 'classical' photoelectrons (less than 60 eV) and result from photoionization of neutrals by soft solar X-rays. Since these photoelectrons are produced wherever the solar flux is incident on the earth's atmosphere, they should be present in sunlit polar cap. But in the polar cap, over these same energies, there is a well-known electron population: the polar rain, a low intensity electron flux of magnetospheric origin. Thus, in the sunlit polar cap, an energetic population of electrons should consist of both an ionospheric (photoelectron) and a magnetospheric (polar rain) component. Using numerical solutions of an electron transport equation with appropriate boundary conditions and sunlit polar cap LAPI data, it is shown that the two populations (photoelectron and polar rain) are indeed present and are both needed to explain polar cap observations.

Decker, Dwight T.↗

Dependence of the surface backscattering coefficients on roughness, frequency and polarization states

This paper summarizes the properties of the surface backscattering coefficient as a function of roughness, incidence angle, frequency and polarization state. Results are presented in the form of like- and cross-polarized backscattering coefficient curves versus the incidence angle and the polarization state for different values of the surface roughness parameters and frequency. It is seen that there is a gradual transition from the standard small perturbation scattering model into the Kirchhoff scattering model as frequency increases. It is also shown that in the intermediate frequency region neither the small perturbation nor the Kirchhoff model is applicable. The maximum value of the polarized backscattering coefficient occurs at VV polarization and its two minimum values occur at zero ellipticity and orientation angles between 0 deg and 45 deg and between 135 deg and 180 deg. The cross-polarized scattering coefficient has two maximum values which occur in the same polarization state regions as the minima of the polarized coefficients.

Fung, A. K.↗

Airborne full polarization radiometry using the MSFC Advanced Microwave Precipitation Radiometer (AMPR)

The applications of vertically and horizontally polarized brightness temperatures in both atmospheric and surface remote sensing have been long recognized by many investigators, particularly those studying SMMR and SSM/I data. Here, the large contrast between the first two Stokes' parameters (T(sub V) and T(sub H)) can be used for detection of sea ice, measurement of ocean surface wind speed, and measurement of cloud and water vapor opacity. High-resolution aircraft data from instruments such as the NASA/MSFC AMPR is crucial for verifying radiative transfer models and developing retrieval algorithms. Currently, the AMPR is outfitted with single-polarization channels at 10, 18, 37 and 85 GHz. To increase its utility, it is proposed that additional orthogonal linearly polarized channels be added to the AMPR. Since the AMPR's feedhorns are already configured for dual orthogonal linearly polarized modes, this would require only a duplication of the currently existing receivers. To circumvent the resulting polarization basis skew caused by the cross-track scanning mechanism, the technique of Electronic Polarization Basis Rotation is proposed to be implemented. Implementation of EPBR requires precise measurement of the third Stokes parameter and will eliminate polarization skew by allowing the feedhorn basis skew angle to be corrected in software. In addition to upgrading AMPR to dual polarization capability (without skew), the modifications will provide an opportunity to demonstrate EPBR on an airborne platform. This is a highly desirable intermediate step prior to satellite implementation.

Gasiewski, Al J.↗

Magellan vertical polarization radar observations

The Magellan high-gain radar antenna system was designed to transmit and receive signals in a pure linear polarization state. The nominal mapping configuration placed this linear polarization direction parallel to the surface of Venus, providing SAR image data in the HH polarization (horizontal transmit and receive) and radiothermal emission data in the H (horizontal - receive only) polarization. During Magellan's extended mission (cycles 2 and 3), two brief experiments were conducted in which the spacecraft was rotated 90 degrees along the axis of the antenna boresight, producing SAR data in the VV polarization and emission data in the V polarization. This study focuses on the SAR results from the first experiment, which included portions of the highly reflective Beta Regio highlands. Theoretical models of polarimetric backscatter, along with experimental data from terrestrial surfaces, predict VV backscatter cross section values to be higher than HH values for most natural surfaces. Randomly polarized ('depolarized') backscatter from rough surfaces is expected in equal amounts for either incident polarization. Roughness differences will therefore be more pronounced in HH measurements than in VV, because the depolarized random component makes up a proportionately larger fraction of the HH backscatter. In addition, HH cross section values are observed to fall off more rapidly than VV values with increasing incidence angle. Slope-related backscatter differences will, therefore, be more pronounced in HH images. The small perturbation polarimetric scattering model also predicts higher VV to HH ratios for surfaces of high dielectric constant.

Plaut, Jeffrey J.↗

The 20 GHz circularly polarized, high temperature superconducting microstrip antenna array

The primary goal was to design and characterize a four-element, 20 GHz, circularly polarized microstrip patch antenna fabricated from YBa2Cu3O(x) superconductor. The purpose is to support a high temperature superconductivity flight communications experiment between the space shuttle orbiter and the ACTS satellite. This study is intended to provide information into the design, construction, and feasibility of a circularly polarized superconducting 20 GHz downlink or cross-link antenna. We have demonstrated that significant gain improvements can be realized by using superconducting materials for large corporate fed array antennas. In addition, we have shown that when constructed from superconducting materials, the efficiency, and therefore the gain, of microstrip patches increases if the substrate is not so thick that the dominant loss mechanism for the patch is radiation into the surface waves of the conductor-backed substrate. We have considered two design configurations for a superconducting 20 GHz four-element circularly polarized microstrip antenna array. The first is the Huang array that uses properly oriented and phased linearly polarized microstrip patch elements to realize a circularly polarized pattern. The second is a gap-coupled array of circularly polarized elements. In this study we determined that although the Huang array operates well on low dielectric constant substrates, its performance becomes extremely sensitive to mismatches, interelement coupling, and design imperfections for substrates with high dielectric constants. For the gap-coupled microstrip array, we were able to fabricate and test circularly polarized elements and four-element arrays on LaAlO3 using sputtered copper films. These antennas were found to perform well, with relatively good circular polarization. In addition, we realized a four-element YBa2Cu3O(x) array of the same design and measured its pattern and gain relative to a room temperature copper array. The patterns were essentially the same as that for the copper array. The measured gain of the YBCO antenna was greater than that for the room temperature copper design at temperatures below 82K, reaching a value of 3.4 dB at the lowest temperatures.

Morrow, Jarrett D.↗

Polar Wind in the Context of the Auroral Plasma Fountain for 2 to 8 RE

Operations of the POLAR Plasma Source Instrument have provided adequate observing time with controlled spacecraft potential to begin a 3D characterization of the polar wind as it exists in the context of the auroral plasma fountain. The principal periods of such polar wind observation to date have been 15-18 Apr. 96, 28 may 96, 14 Jun. - 6 Sep. 96, 17-29 Mar. 97, 29 May - 12 Jun. 97, 13-27 Aug. 97. Separate observations have been made near 2 RE geocentric in the south polar perigee passes and between 6-8 RE geocentric in the north polar apogee passes. Analyses of data from the Thermal Ion Dynamics Experiment during these periods are used to characterize the altitude, local time, and invariant latitude distribution of the polar wind. Data from these and other periods are used to establish the auroral plasma heating context within which the polar wind outflows exist. The available data will be used to address the temporal variability of the polar wind during the period of operations to date. Comparisons between the observations and a coupled fluid-semikinetic model are used to interpret the observed spatial structure and temporal variability.

Moore, T. E.↗