Search NASA⌕ Search

SEARCH · Search NASA

Results for “polaron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Lewis acid–base pair doping of p-type organic semiconductors

Doping is required to increase the electrical conductivity of organic semiconductors for uses in electronic and energy conversion devices. The limited number of commonly used p-type dopants suggests that new dopants or doping mechanisms could improve the efficiency of doping and provide new means for processing doped polymers. Drawing on Lewis acid–base pair chemistry, we combined Lewis acid dopant B(C 6 F 5 ) 3 (BCF) with the weak Lewis base benzoyl peroxide (BPO). The detailed behavior of p-type doping of the model polymer poly(3-hexylthiophene) (P3HT) with this Lewis acid–base pair in solution was examined. Solution 19F-NMR spectra confirmed the formation of the expected counterion, as well as side products from reactions with solvent. BCF : BPO was also found to efficiently dope a range of semiconducting polymers with varying chemical structures demonstrating that the BCF : BPO combination has an effective electron affinity of at least 5.3 eV. In thin films of regioregular P3HT cast from the doped solutions, delocalized polarons formed due to the large counterions leading to a large polaron-counterion distance. At and above 0.2 eq. BCF : BPO doping, amorphous areas of the film became doped, disrupting the structural order of the films. Despite the change in structural order, thin films of regioregular P3HT doped with 0.2 eq. BCF : BPO had a conductivity of 25 S cm -1 . This study demonstrates the effectiveness of a two-component Lewis acid–base doping mechanism and suggests additional two-component Lewis acid–base chemistries should be explored.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Computational Fermi Level Engineering and Doping-Type Conversion of Mg:Ga 2 O 3 via Three-Step Synthesis Process

Gallium oxide (Ga 2 O 3 ) is being actively explored for electronics that can operate at high power, temperature, and frequency as well as for deep-ultraviolet optoelectronics and other applications due to its ultra-wide bandgap (UWBG) and low projected fabrication cost of large-size and high-quality crystals. Efficient n-type doping of monoclinic beta-phase of Ga 2 O 3 has been achieved, but p-type doping faces fundamental obstacles due to compensation, deep acceptor levels, and the polaron transport mechanism of free holes. However, aside from the challenges of achieving p-type conductivity, plenty of opportunity exists to engineer the position of the Fermi level for improved design of Ga 2 O 3 -based devices. We use first-principles defect theory and defect equilibrium calculations to simulate a three-step growth-annealing-quench synthesis protocol for hydrogen-assisted Mg doping in ß-Ga 2 O 3 . The simulations take into account the gas phase equilibrium between H 2 , O 2 , and H 2 O, which determines the H chemical potential. We predict Ga 2 O 3 doping-type conversion to a net p-type regime after growth under reducing conditions in the presence of H2 followed by O-rich annealing, which is a similar process to Mg acceptor activation by H removal in GaN. For equilibrium annealing with re-equilibration of compensating O vacancies, there is an optimal temperature that maximizes the Ga 2 O 3 net acceptor density for a given Mg doping level; the acceptor density is further increased in the non-equilibrium annealing scenario without re-equilibration. After quenching to operating temperature, the Ga 2 O 3 Fermi level drops below mid-gap down to about 1.5 eV above the valence band maximum, creating a significant number of uncompensated neutral Mg Ga 0 acceptors. The resulting free hole concentration in Ga 2 O 3 is very low even at elevated operating temperature (~10 8 cm -3 at 400°C) due to the deep energy level of these Mg acceptors, and hole conductivity is further impeded by the polaron hopping mechanism. However, the Fermi-level reduction and suppression of free electron density in this doping-type converted (NA>ND) Ga 2 O 3 material are important for improved designs of Ga 2 O 3 electronic devices. These results illustrate the power of computational predictions not only for new materials but also for their synthesis science.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultrafast spin-nematic and ferroelectric phase transitions induced by femtosecond light pulses

We report, optically induced phase transitions of the manganite Pr 1/3 Ca 2/3 MnO 3 have been simulated by using a model Hamiltonian that captures the dynamics of strongly correlated charge, orbital, lattice, and spin degrees of freedom. Its parameters have been extracted from first-principles calculations. Beyond a critical intensity of a femtosecond light pulse, the material undergoes an ultrafast and nonthermal magnetic phase transition from a noncollinear to collinear antiferromagnetic phase. The light-pulse excites selectively either a spin-nematic or a ferroelectric phase, depending on the light polarization. The behavior can be traced to an optically induced ferromagnetic coupling between Mn trimers, i.e., polarons which are delocalized over three Mn sites. The polarization guides the polymerization of the polaronic crystal into distinct patterns of ferromagnetic chains determining the target phase.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Superconductivity, charge density waves, and bipolarons in the Holstein model

The electron-phonon ( e-ph ) interaction remains of great interest in condensed matter physics and plays a vital role in realizing superconductors, charge density waves (CDW), and polarons. We study the two-dimensional Holstein model for e-ph coupling using determinant quantum Monte Carlo across a wide range of its phase diagram as a function of temperature, electron density, dimensionless e-ph coupling strength, and the adiabatic ratio of the phonon frequency to the Fermi energy. We describe the behavior of the CDW correlations, the competition between superconducting and CDW orders and polaron formation, the optimal conditions for superconductivity, and the transition from the weak-coupling regime to the strong-coupling regime. Superconductivity is optimized at intermediate e-ph coupling strength and intermediate electron density, and the superconducting correlations increase monotonically with phonon frequency. The global maximum for superconductivity in the Holstein model occurs at large phonon frequency, the limit where an attractive Hubbard model effectively describes the physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Many-body Green's function approaches to the doped Fröhlich solid: Exact solutions and anomalous mass enhancement

In polar semiconductors and insulators, the Fröhlich interaction between electrons and long-wavelength longitudinal optical phonons induces a many-body renormalization of the carrier effective masses and the appearance of characteristic phonon sidebands in the spectral function, commonly dubbed “polaron satellites.” The simplest model that captures these effects is the Fröhlich model, whereby electrons in a parabolic band interact with a dispersionless longitudinal optical phonon. The Fröhlich model has been employed in a number of seminal papers, from early perturbation-theory approaches to modern diagrammatic Monte Carlo calculations. One limitation of this model is that it focuses on undoped systems, thus ignoring carrier screening and Pauli blocking effects that are present in real experiments on doped samples. Here, to overcome this limitation, we extend the Fröhlich model to the case of doped systems, and we provide exact solutions for the electron spectral function, mass enhancement, and polaron satellites. We perform the analysis using two approaches, namely, Dyson’s equation with the Fan-Migdal self-energy, and the second-order cumulant expansion. We find that these two approaches provide qualitatively different results. In particular, Dyson’s approach yields better quasiparticle masses and worse satellites, while the cumulant approach provides better satellite structures, at the price of worse quasiparticle masses. Both approaches yield an anomalous enhancement of the electron effective mass at finite doping levels, which in turn leads to a breakdown of the quasiparticle picture in a significant portion of the phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Essential role of magnetic frustration in the phase diagrams of doped cobaltites

Doped perovskite cobaltites (e.g., La 1–x Sr x CoO 3 ) have been extensively studied for their spin-state physics, electronic inhomogeneity, and insulator-metal transitions. Ferromagnetically interacting spin-state polarons emerge at low x in the phase diagram of these compounds, eventually yielding long-range ferromagnetism. The onset of long-range ferromagnetism (x≈0.18) is substantially delayed relative to polaron percolation (x≈0.05), however, generating a troubling inconsistency. Here, in this study, Monte Carlo simulations of a disordered classical spin model are used to establish that previously ignored magnetic frustration is responsible for this effect, enabling faithful reproduction of the magnetic phase diagram.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The role of Co valence in charge transport in the entropy‐stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O

Abstract Many of the studies on the entropy‐stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O have been heavily application‐based. Previous works have studied effects of cation stoichiometry on the entropy‐driven reaction to form a single phase, but a fundamental exploration of the effects of anion stoichiometry and/or redox chemistry on electrical properties is lacking. Using near‐edge X‐ray absorption fine structure (NEXAFS) and electrical measurements, we show that oxidizing thin film samples of (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O affects primarily the valence of Co, leaving the other cations in this high‐entropy system unchanged. This oxidation increases electrical conduction in these thin films, which occurs via small polaron hopping mediated by the Co valence shift from 2+ to a mixed 2+/3+ state. In parallel, we show that bulk samples sintered in an oxygen‐rich atmosphere have a lower activation energy for electrical conduction than those equilibrated in a nitrogen (reducing) atmosphere. Combining feasible defect compensation scenarios with electrical impedance measurements and NEXAFS data, we propose a self‐consistent interpretation of Co redox‐mediated small polaron conduction as the dominant method of charge transfer in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling a High-Temperature Electrochemically Driven Water-Gas-Shift Process Using a Mixed-Conducting Membrane without External Electrical Power

This paper develops a model to predict and interpret the performance of an elevated-temperature, electrochemical, membrane-assisted, water-gas-shift process. The process uses separated feed streams of H 2 O and CO to produce separated streams of H 2 and CO 2 , without an external electrical power source. The dense ceramic membrane is mixed ionic-electronic-conducting (MIEC) gadolinium-doped ceria (GDC) and the porous composite electrodes are Ni-YSZ. At elevated temperature, GDC conducts both oxygen ions and small polarons. The present process uses chemical potential to drive the process. Electrochemical oxidation of CO proceeds within the composite anode and H 2 O reduction proceeds within the composite cathode. At high temperature (e.g., T > 700 °C), GDC has significant electronic leakage in the form of a reduced-cerium small polaron, which supports the charge-transfer reactions. In a typical electrolyzer or fuel cell, this leakage is significantly problematic. However, the present process depends on the leakage current to complete the electrochemical circuit. Model development and validation is based on measured material properties and reactor performance. Potential applications include using CO-rich blast-furnace off gases in steel processing, producing separated streams of H 2 and CO 2 .

Zhu, Huayang↗
DOE OSTI2020

Time-Resolved Structural Kinetics of an Organic Mixed Ionic–Electronic Conductor

The structure and packing of organic mixed ionic–electronic conductors have an especially significant effect on transport properties. In operating devices, this structure is not fixed but is responsive to changes in electrochemical potential, ion intercalation, and solvent swelling. Toward this end, the steady-state and transient structure of the model organic mixed conductor, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), is characterized using multimodal time-resolved operando techniques. Steady-state operando X-ray scattering reveals a doping-induced lamellar expansion of 1.6 Å followed by 0.4 Å relaxation at high doping levels. Time-resolved operando X-ray scattering reveals asymmetric rates of lamellar structural change during doping and dedoping that do not directly depend on potential or charging transients. Further, time-resolved spectroscopy establishes a link between structural transients and the complex kinetics of electronic charge carrier subpopulations, in particular the polaron–bipolaron equilibrium. These findings provide insight into the factors limiting the response time of organic mixed-conductor-based devices, and present the first real-time observation of the structural changes during doping and dedoping of a conjugated polymer system via X-ray scattering.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhanced mobility of cations and anions in the redox state: The polaronium mechanism

Hugely enhanced slow-ion diffusivity has been widely observed under extreme redox conditions and for unclear reasons. Aided by first-principles calculations on model systems of ZrO 2 , CeO 2 , BaTiO 3 and Li 4/3 Mn 2/3 O 2 , here we successfully explained the intriguing phenomenon by a polaronium mechanism. We found a polaronium, defined as a transitory complex of a polaronic electron or hole and a migrating counterion, becomes highly mobile when the counterion comes from a d 0 or f 0 cation (e.g., Zr 4+ , Ti 4+ and Ce 4 ) or a p 6 anion (e.g., O 2- ) in the host compound. Upon a redox reaction, the complex attains a d 1 /f 1 or p 5 configuration, which spontaneously forms because it is favored by an electron-phonon interaction (manifest as the Jahn-Teller effect in high symmetry systems) that enables local relaxation and lowers the system energy. Here our calculations found such interaction reaching its peak at the saddle point where the local environment is softest, so soft that it allows a reorientation of the anisotropic d/f/p orbital to minimize the electron repulsion locally. Since the complex may dissolve after a successful ion-migration event, the redox electron/hole can be recycled to form another free-radical-like polaronium elsewhere, thereby enhancing ion migration repeatedly. The proposed polaronium mechanism, which also operates in ceramics doped with mixed-valence cations, is most relevant under dynamic and extreme thermal/field/irradiation conditions where extra electrons/holes are abundantly generated by non-equilibrium redox reactions. For such operations, some with emerging applications, our diffusion-enhancing mechanism may provide new theoretical insight to help understand their material/microstructure stability and performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Adsorption, charge transfer and a coverage-driven transition of alkali metals on rutile TiO 2 (110)

The interaction of alkali metals with metal oxide surfaces is central to tuning surface reactivity in heterogeneous catalysis and photocatalysis. Here we present a comprehensive DFT+U study of the adsorption of alkali metals (Li, Na, K, Rb, Cs) on the (110) surface of rutile TiO 2 . At low coverage (θ = 1/8), all alkali metals bind preferentially to bridging oxygen sites with adsorption energies in the range −4.06 to −3.33 eV, transferring nearly one full electron (0.92–0.99 |e|) to the substrate and inducing Ti 4+ → Ti 3+ reduction. The excess charge localizes preferentially at subsurface Ti sites in the form of small polarons. Diffusion barriers indicate facile motion along bridging-oxygen rows, whereas inter-row hopping is strongly hindered. Coverage effects were examined systematically for potassium: adsorption energy and charge transfer per K atom decrease monotonically with increasing θ. Strikingly, a sharp energy discontinuity occurs between θ = 4/8 and θ = 5/8 (ΔE ≈ 1 eV per atom), which we identify as a coverage-driven structural transition arising from steric packing constraints and enhanced K–K electrostatic repulsion once every (1×1) surface cell is occupied. This structural transition perfectly correlates with a dramatic drop in the work function down to an ultra-low minimum of 0.84 eV at θ=5/8, followed by a metallization- driven recovery at higher coverages. Ab initio molecular dynamics simulations confirm zigzag K arrangements at moderate coverage (θ = 1/3), while at high coverage (θ = 2/3) short-range K–K correlations emerge without long-range order. These results provide atomistic insight into the structure–activity relationships underlying alkali promotion effects on oxide-supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Light-Induced Transient Lattice Dynamics and Metastable Phase Transition in CH 3 NH 3 PbI 3 Nanocrystals

In this study, methylammonium lead iodide (MAPbI 3 ) perovskite nanocrystals (NCs) offer desirable optoelectronic properties with prospective utility in photovoltaics, lasers, and light-emitting diodes (LEDs). Structural rearrange-ments of MAPbI 3 in response to photoexcitation, such as lattice distortions and phase transitions, are of particular interest, as these engender long carrier lifetime and bolster carrier diffusion. Here, we use variable temperature X-ray diffraction (XRD) and synchrotron-based transient X-ray diffraction (TRXRD) to investigate lattice response following ultrafast optical excitation. MAPbI 3 NCs are found to slowly undergo a phase transition from the tetragonal to a pseudocubic phase over the course of 1 ns under 0.02-4.18 mJ/cm 2 fluence photoexcitation, with apparent nonthermal lattice distortions attributed to polaron formation. Lattice recovery exceeds time scales expected for both carrier recombination and thermal dissipation, indicating meta-stability likely due to the proximal phase transition, with symmetry-breaking along equatorial and axial directions. These findings are relevant for fundamental understanding and applications of structure-function properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrafast Carrier Drift Transport Dynamics in CsPbI3 Perovskite Nanocrystalline Thin Films

We study the early time carrier drift dynamics in CsPbI3 nanocrystal thin films with a sub 25 ps time resolution. Prior to trapping, carriers exhibit band-like transport characteristics, which is similar to those of traditional semiconductor solar absorbers including Si and GaAs due to optical phonon and carrier scattering at high temperatures. In contrast to the popular polaron scattering mechanism, the CsPbI3 nanocrystal thin film demonstrates the strongest optical phonon scattering mechanism among other inorganic-organic hybrid perovskites, Si, and GaAs. This ultrafast dynamics study establishes a foundation for understanding the fundamental carrier drift properties that drive perovskite nanocrystal optoelectronics.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,S↗
DOE OSTI2024

Resonant Multiple-Phonon Absorption Causes Efficient Anti-Stokes Photoluminescence in CsPbBr 3 Nanocrystals

Lead halide perovskite nanocrystals, such as CsPbBr 3 , exhibit efficient photoluminescence (PL) up-conversion, also referred to as anti-Stokes photoluminescence (ASPL). This is a phenomenon where irradiating nanocrystals up to 100 meV below gap results in higher energy band edge emission. Most surprising is that ASPL efficiencies approach unity and involve single-photon interactions with multiple phonons. This is unexpected given the statistically disfavored nature of multiple-phonon absorption. Here, in this study, we report and rationalize near-unity anti-Stokes photoluminescence efficiencies in CsPbBr 3 nanocrystals and attribute them to resonant multiple-phonon absorption by polarons. The theory explains paradoxically large efficiencies for intrinsically disfavored, multiple-phonon-assisted ASPL in nanocrystals. Moreover, the developed microscopic mechanism has immediate and important implications for applications of ASPL toward condensed phase optical refrigeration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Understanding lead halide perovskites

It has been ten years since research on lead halide perovskites (LHPs) took off spectacularly and expanded into one of the most active fields today in chemistry, physics, materials science, and engineering. There is no doubt that the rapid growth of this field has been fueled by the exceptional performance of this class of materials in solar cells, light emitting devices, and other electronic, optoelectronic, and photonic devices. Such application oriented advance has been accompanied by major development in mechanistic understanding. Growing mechanistic studies on LHPs have revealed structure–property relationships including, among others, structural instability, unique defect chemistry, dynamic disorder and anharmonicity of phonons, local symmetry breaking, efficient screening of charge carriers in large polaron formation, and the Rashba effect due to spin–orbital coupling and the presence of local electric fields. This special issue collects the cutting edge of our understanding of why LHPs work and what lessons LHPs have taught us about structure and dynamics, in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Zn acceptors in β-Ga 2 O 3 crystals

Electron paramagnetic resonance (EPR) is used to identify and characterize neutral zinc acceptors in Zn-doped β-Ga 2 O 3 crystals. Two EPR spectra are observed at low temperatures, one from Zn ions at tetrahedral Ga(1) sites (the $Zn$$^{0}_{Ga 1}$ acceptor) and one from Zn ions at octahedral Ga(2) sites (the $Zn$$^{0}_{Ga 2}$ acceptor). These Zn acceptors are small polarons, with the unpaired spin localized in each case on a threefold coordinated oxygen O(I) ion adjacent to the Zn ion. Resolved hyperfine interactions with neighboring 69 Ga and 71 Ga nuclei allow the EPR spectra from the two acceptors to be easily distinguished: $Zn$$^{0}_{Ga 1}$ acceptors interact equally with two Ga(2) ions and $Zn$$^{0}_{Ga 2}$ acceptors interact unequally with a Ga(1) ion and a Ga(2) ion. The as-grown crystals are compensated, with the Zn ions initially present as singly ionized acceptors ($Zn$$^{-}_{Ga 1}$ and $Zn$$^{-}_{Ga 2}$). Exposing a crystal to 325 nm laser light, while being held at 140 K, primarily produces neutral $Zn$$^{0}_{Ga 2}$ acceptors when photoinduced holes are trapped at $Zn$$^{-}_{Ga 2}$ acceptors. This suggests that there may be significantly more Zn ions at Ga(2) sites than at Ga(1) sites. Warming the crystal briefly to room temperature, after removing the light, destroys the EPR spectrum from the shallower $Zn$$^{0}_{Ga 2}$ acceptors and produces the EPR spectrum from the more stable $Zn$$^{0}_{Ga 1}$ acceptors. Furthermore, the $Zn$$^{0}_{Ga 2}$ acceptors decay in the 240–260 K region with a thermal activation energy near 0.65 eV, similar to $Mg$$^{0}_{Ga 2}$ acceptors, whereas the slightly deeper $Zn$$^{0}_{Ga 1}$ acceptors decay close to room temperature with an approximate thermal activation energy of 0.78 eV.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nonadiabatic coupling of the dynamical structure to the superconductivity in YSr 2 Cu 2.75 Mo 0.25 O 7.54 and Sr 2 CuO 3.3

A crucial issue in cuprates is the extent and mechanism of the coupling of the lattice to the electrons and the superconductivity. Here we report Cu K edge extended X-ray absorption fine structure measurements elucidating the internal quantum tunneling polaron (iqtp) component of the dynamical structure in two heavily overdoped superconducting cuprate compounds, tetragonal YSr 2 Cu 2.75 Mo 0.25 O 7.54 with superconducting critical temperature, T c = 84 K and hole density p = 0.3 to 0.5 per planar Cu, and the tetragonal phase of Sr 2 CuO 3.3 with T c = 95 K and p = 0.6. In YSr 2 Cu 2.75 Mo 0.25 O 7.54 changes in the Cu-apical O two-site distribution reflect a sequential renormalization of the double-well potential of this site beginning at T c , with the energy difference between the two minima increasing by ~6 meV between T c and 52 K. Sr 2 CuO 3.3 undergoes a radically larger transformation at T c , >1-Å displacements of the apical O atoms. The principal feature of the dynamical structure underlying these transformations is the strongly anharmonic oscillation of the apical O atoms in a double-well potential that results in the observation of two distinct O sites whose Cu–O distances indicate different bonding modes and valence-charge distributions. The coupling of the superconductivity to the iqtp that originates in this nonadiabatic coupling between the electrons and lattice demonstrates an important role for the dynamical structure whereby pairing occurs even in a system where displacements of the atoms that are part of the transition are sufficiently large to alter the Fermi surface. The synchronization and dynamic coherence of the iqtps resulting from the strong interactions within a crystal would be expected to influence this process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗