Search NASA⌕ Search

SEARCH · Search NASA

Results for “preforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Using small angle x-ray scattering to examine the aggregation mechanism in silica nanoparticle-based ambigels for improved optical clarity

Silica-based aerogels are a promising low-cost solution for improving the insulation efficiency of single-pane windows and reducing the energy consumption required for space heating and cooling. Two key material properties required are high porosity and small pore sizes, which lead to low thermal conductivity and high optical transparency, respectively. However, porosity and pore size are generally directly linked, where high porosity materials also have large pore sizes. This is unfavorable as large pores scatter light, resulting in reduced transmittance in the visible regime. In this work, we utilized preformed silica colloids to explore methods for reducing pore size while maintaining high porosity. Further, the use of preformed colloids allows us to isolate the effect of solution conditions on porous gel network formation by eliminating simultaneous nanoparticle growth and aggregation found when using typical sol–gel molecular-based silica precursors. Specifically, we used in situ synchrotron-based small-angle x-ray scattering during gel formation to better understand how pH, concentration, and colloid size affect particle aggregation and pore structure. Ex situ characterization of dried gels demonstrates that peak pore widths can be reduced from 15 to 13 nm, accompanied by a narrowing of the overall pore size distribution, while maintaining porosities of 70%–80%. Optical transparency is found to increase with decreasing pore sizes while low thermal conductivities ranging from 95 +/− 13 mW/m K are maintained. Mechanical performance was found to depend primarily on effective density and did not show a significant dependence on solution conditions. Overall, our results provide insights into methods to preserve high porosity in nanoparticle-based aerogels while improving optical transparency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical properties of active bismuth centres in silica fibres containing no other dopants

Optical fibre preforms and fibres with a bismuth-doped silica core containing no other dopants have been fabricated by the powder-in-tube technique. The optical loss has been measured for the first time in such fibres in a wide spectral range, from 190 to 1700 nm. We have studied the luminescence of active bismuth centres and the luminescence lifetime for some of their bands in both the preforms and the fibres drawn out from them. (optical fibres)

36 MATERIALS SCIENCE↗

Luminescence and photoinduced absorption in ytterbium-doped optical fibres

Photochemical reactions induced in the glass network of an ytterbium-doped fibre core by IR laser pumping and UV irradiation have been investigated by analysing absorption and luminescence spectra. We have performed comparative studies of the photoinduced absorption and luminescence spectra of fibre preforms differing in core glass composition: Al{sub 2}O{sub 3} : SiO{sub 2}, Al{sub 2}O{sub 3} : Yb{sub 2}O{sub 3} : SiO{sub 2}, and P{sub 2}O{sub 5} : Yb{sub 2}O{sub 3} : SiO{sub 2}. The UV absorption spectra of unirradiated preform core samples show strong bands peaking at 5.1 and 6.5 eV, whose excitation plays a key role in photoinduced colour centre generation in the glass network. 'Direct' UV excitation of the 5.1- and 6.5-eV absorption bands at 244 and 193 nm leads to the reduction of some of the Yb{sup 3+} ions to Yb{sup 2+}. The photodarkening of ytterbium-doped fibres by IR pumping is shown to result from oxygen hole centre generation. A phenomenological model is proposed for the IR-pumping-induced photodarkening of ytterbium-doped fibres. The model predicts that colour centre generation in the core glass network and the associated absorption in the visible range result from a cooperative effect involving simultaneous excitation of a cluster composed of several closely spaced Yb{sup 3+} ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of IR-emitting centres in Pb-doped silica fibres

The first fibre preforms with a Pb-doped silica core, free of other dopants, have been produced using chemical vapour deposition. The preforms have been used to fabricate holey optical fibres. The spectroscopic properties of the fibres have been studied in detail in the range 400 - 1700 nm: we have measured the optical loss, constructed a three-dimensional luminescence excitation - emission graph and determined the decay time for the major luminescence peaks.

36 MATERIALS SCIENCE↗

Spectral behaviour of bismuth centres in different steps of the FCVD process

The behaviour of bismuth ions in silica glass free of other dopants has been studied in different steps of the furnace chemical vapour deposition (FCVD) process. Porous layers annealed and consolidated in different atmospheres, a bismuth chloride solution in acetone for porous layer impregnation, the resultant glass preform and holey fibres drawn out under various conditions have been characterised by spectroscopic techniques and X-ray diffraction. Active bismuth centres present in the preform and luminescing in the visible and IR spectral regions persist during drawing under reducing conditions, whereas drawing under oxidising conditions eliminates such centres. Annealing under reducing conditions produces absorption bands of IR-emitting bismuth centres (IRBCs) in spectra of fibres drawn out under oxidising conditions and concurrently increases the background loss. Under the annealing conditions of this study (argon atmosphere, T{sub max} = 1100 Degree-Sign C, 30 min), the IRBC concentration reaches a maximum and then decreases, whereas the background loss increases monotonically. (fiber optics)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge-transfer state excitation as the main mechanism of the photodarkening process in ytterbium-doped aluminosilicate fibres

We have studied photodarkening in ytterbium-doped fibre preforms with an aluminosilicate glass core. Analysis of their absorption and luminescence spectra indicates the formation of stable Yb{sup 2+} ions in the glass network under IR laser pumping at a wavelength λ = 915 nm and under UV irradiation with an excimer laser (λ = 193 nm). We have performed comparative studies of the luminescence spectra of the preforms and crystals under excitation at a wavelength of 193 nm. The mechanism behind the formation of Yb{sup 2+} ions and aluminium – oxygen hole centres (Al-OHCs), common to ytterbium-doped YAG crystals and aluminosilicate glass, has been identified: photoinduced Yb{sup 3+} charge-transfer state excitation. (optical fibres)

36 MATERIALS SCIENCE↗

Transport model study of nuclear stopping in heavy-ion collisions over the energy range from 0.09A to 160A GeV

Nuclear stopping in heavy-ion collisions over a beam energy range from SIS and AGS up to SPS is studied in the framework of the modified Ultrarelativistic Quantum Molecular Dynamics transport model, in which mean field potentials of both formed and 'preformed' hadrons (from string fragmentation) and medium-modified nucleon-nucleon elastic cross sections are considered. It is found that nuclear stopping is influenced by both the stiffness of the equation of state and medium modifications of nucleon-nucleon cross sections at SIS energies. At high SPS energies, a two-bump structure is shown in the experimental rapidity distribution of free protons, which can be understood by considering the preformed hadron potentials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

{alpha}-decay and fusion phenomena in heavy ion collisions using nucleon-nucleon interactions derived from relativistic mean-field theory

Nucleus-nucleus potentials are determined in the framework of the double-folding model for a new microscopic nucleon-nucleon (NN) interaction relativistic mean field-3-Yukawa (R3Y) derived from the popular relativistic mean-field theory Lagrangian, and the results are compared for the use of Michigan-3-Yukawa (M3Y) effective NN interactions. The double-folding potentials so obtained are further taken up in the context of the preformed cluster model (PCM) of Gupta and collaborators and the barrier penetration model to study respectively the ground-state (g.s.) {alpha}-decay and low-energy fusion reactions. In this paper, using PCM, we deduce empirically the {alpha} preformation probability P{sub 0}{sup {alpha}(emp)} from experimental data on a few g.s. {alpha} decays in the trans-lead region. For fusion reactions, two projectile-target systems {sup 12}C+{sup 208}Pb and {sup 16}O+{sup 208}Pb are selected for calculating the barrier energies as well positions, fusion cross sections ({sigma}{sub fus}), and fusion barrier distribution [D(E{sub c.m.})]. The barrier energies and positions change for the R3Y NN interactions in comparison with those of the M3Y NN interactions. We find that in the {alpha}-decay studies the values of P{sub 0}{sup {alpha}(emp)}(R3Y) are similar to those of P{sub 0}{sup {alpha}(emp)}(M3Y). Further, both NN interactions give similar {sigma}{sub fus} values using the Wong formula specifically when the R3Y NN interaction calculated {sigma}{sub fus} values are reduced by 1.5 times, and the results are in agreement with the experimental data for both the systems, especially for the higher energies. Results for D(E{sub c.m.}) are also quite similar for both choices of NN interaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Role of higher-multipole deformations in exotic {sup 14}C cluster radioactivity

We have studied nine cases of spontaneous emission of {sup 14}C clusters in the ground-state decays of the same number of parent nuclei from the trans-lead region, specifically from {sup 221}Fr to {sup 226}Th, using the preformed cluster model (PCM) of Gupta and collaborators, with choices of spherical, quadrupole deformation ({beta}{sub 2}) alone, and higher-multipole deformations ({beta}{sub 2}, {beta}{sub 3}, {beta}{sub 4}) with cold ''compact'' orientations {theta}{sup c} of decay products. The calculated {sup 14}C cluster decay half-life times are found to be in nice agreement with experimental data only for the case of higher-multipole deformations ({beta}{sub 2}-{beta}{sub 4}) and {theta}{sup c} orientations of cold elongated configurations. In other words, compared to our earlier study of clusters heavier than {sup 14}C, where the inclusion of {beta}{sub 2} alone, with ''optimum'' orientations, was found to be enough to give the best comparison with data, here for {sup 14}C cluster decay the inclusion of higher-multipole deformations (up to hexadecapole), together with {theta}{sup c} orientations, is found to be essential on the basis of the PCM. Interestingly, whereas both the penetration probability and assault frequency work simply as scaling factors, the preformation probability is strongly influenced by the order of multipole deformations and orientations of nuclei. The possible role of Q value and angular-momentum effects are also considered in reference to {sup 14}C cluster radioactivity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hot-electron energy coupling in ultraintense laser-matter interaction

We investigate the hydrodynamic response of plasma gradients during the interaction with ultraintense energetic laser pulses using kinetic particle simulations. Energetic laser pulses are capable of compressing preformed plasma gradients over short times, while accelerating low-density plasma backward. As light is absorbed on a steepened interface, hot-electron temperature and coupling efficiency drop below the ponderomotive scaling and we are left with an absorption mechanism that strongly relies on the electrostatic potential caused by low-density preformed plasma. We describe this process, discuss properties of the resulting electron spectra and identify the parameter regime where strong compression occurs. Finally, we discuss implications for fast ignition and other applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser Heating of Solid Matter by Light-Pressure-Driven Shocks at Ultrarelativistic Intensities

The heating of solid targets irradiated by 5 x 10^20 W cm^-2, 0.8 ps, 1.05 um wavelength laser light is studied by x-ray spectroscopy of the K-shell emission from thin layers of Ni, Mo, and V. A surface layer is heated to ~5 keV with an axial temperature gradient of 0.6 um scale length. Images of Ni Ly sub-alpha show the hot region has <25 um diameter. These data are consistent with collisional particle-in-cell simulations using preformed plasma density profiles from hydrodynamic modeling which show that the >100 Gbar light pressure compresses the preformed plasma and dries a shock into the solid, heating a thin layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hot-Electron Energy Coupling in Ultraintense Laser-Matter Interaction

We investigate the hydrodynamic response of plasma gradients during the interaction with ultraintense energetic laser pulses, using kinetic particle simulations. Energetic laser pulses are capable of compressing preformed plasma gradients over short times while accelerating low-density plasma backwards. As light is absorbed on a steepened interface, hot-electron temperature and coupling efficiency drop below the ponderomotive scaling, and we are left with a new absorption mechanism that strongly relies on the electrostatic potential caused by low-density preformed plasma. We describe this process, explain electron spectra, and identify the parameter regime where strong compression occurs. Finally, we discuss the implications for fast ignition and other applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strategies for mitigating the ionization-induced beam head erosion problem in an electron-beam-driven plasma wakefield accelerator

Strategies for mitigating ionization-induced beam head erosion in an electron-beam-driven plasma wakefield accelerator (PWFA) are explored when the plasma and the wake are both formed by the transverse electric field of the beam itself. Beam head erosion can occur in a preformed plasma because of a lack of focusing force from the wake at the rising edge (head) of the beam due to the finite inertia of the electrons. When the plasma is produced by field ionization from the space charge field of the beam, the head erosion is significantly exacerbated due to the gradual recession (in the beam frame) of the 100% ionization contour. Beam particles in front of the ionization front cannot be focused (guided) causing them to expand as in vacuum. When they expand, the location of the ionization front recedes such that even more beam particles are completely unguided. Eventually this process terminates the wake formation prematurely, i.e., well before the beam is depleted of its energy. Ionization-induced head erosion can be mitigated by controlling the beam parameters (emittance, charge, and energy) and/or the plasma conditions. In this paper we explore how the latter can be optimized so as to extend the beam propagation distance and thereby increase the energy gain. In particular we show that, by using a combination of the alkali atoms of the lowest practical ionization potential (Cs) for plasma formation and a precursor laser pulse to generate a narrow plasma filament in front of the beam, the head erosion rate can be dramatically reduced. Simulation results show that in the upcoming “two-bunch PWFA experiments” on the FACET facility at SLAC national accelerator laboratory the energy gain of the trailing beam can be up to 10 times larger for the given parameters when employing these techniques. Comparison of the effect of beam head erosion in preformed and ionization produced plasmas is also presented.

43 PARTICLE ACCELERATORS↗

Crystallization of the Nonameric Small Terminase Subunit of bacteriophage P22

The packaging of viral genomes into preformed empty procapsids is powered by an ATP-dependent genome-translocating motor. This molecular machine is formed by a heterodimer consisting of large terminase (L-terminase) and small terminase (S-terminase) subunits, which is assembled into a complex of unknown stoichiometry, and a dodecameric portal protein. There is considerable confusion in the literature regarding the biologically relevant oligomeric state of terminases, which, like portal proteins, form ring-like structures. The number of subunits in a hollow oligomeric protein defines the internal diameter of the central channel and the ability to fit DNA inside. Thus, knowledge of the exact stoichiometry of terminases is critical to decipher the mechanisms of terminase-dependent DNA translocation. Here, the gene encoding bacteriophage P22 S-terminase in Escherichia coli has been overexpressed and the protein purified under native conditions. In the absence of detergents and/or denaturants that may cause disassembly of the native oligomer and formation of aberrant rings, it was found that P22 S-terminase assembles into a concentration-independent nonamer of {approx}168 kDa. Nonameric S-terminase was crystallized in two different crystal forms at neutral pH. Crystal form I belonged to space group P2{sub 1}2{sub 1}2, with unit-cell parameters a = 144.2, b = 144.2, c = 145.3 {angstrom}, and diffracted to 3.0 {angstrom} resolution. Crystal form II belonged to space group P2{sub 1}, with unit-cell parameters a = 76.48, b = 100.9, c = 89.95 {angstrom}, {beta} = 93.73{sup o}, and diffracted to 1.75 {angstrom} resolution. Preliminary crystallographic analysis of crystal form II confirms that the S-terminase crystals contain a nonamer in the asymmetric unit and are suitable for high-resolution structure determination.

59 BASIC BIOLOGICAL SCIENCES↗

Three-Dimensional Permeability of Thick-Section Glass Fabric Reinforced Polymer Composite by Vacuum-Assisted Resin Infusion Molding

Abstract Determination of permeability of thick-section glass fabric preforms with fabric layers of different architectures is critical for manufacturing large, thick composite structures with complex geometry, such as wind turbine blades. The thick-section reinforcement permeability is inherently three-dimensional and needs to be obtained for accurate composite processing modeling and analysis. Numerical simulation of the liquid stage of vacuum-assisted resin infusion molding (VARIM) is important to advance the composite manufacturing process and reduce processing-induced defects. In this research, the 3D permeability of thick-section E-glass fabric reinforcement preforms is determined, and the results are validated by a comparison between flow front progressions from experiments and from numerical simulations using ansys fluent software. The orientation of the principal permeability axes were unknown prior to experiments. The approach used in this research differs from those in literature in that the through-thickness permeability is determined as a function of flow front positions along the principal axes and the in-plane permeabilities and is not dependent on the inlet radius. The approach was tested on reinforcements with fabric architectures which vary through-the-thickness direction, such as those in a spar cap of a wind turbine blade. The computational simulations of the flow-front progression through-the-thickness were consistent with experimental observations.

Engineering↗

Numerical simulation of terahertz radiation by laser-driven plasma dipole oscillation

Laser-plasma interactions have many theoretical and technological applications. One is the use of coherently accelerated electrons to provide novel sources of THz radiation. Our research focuses on simulating the cross/self-interactions between two high intensity, ultra-short, counter propagating and detuned laser pulses and an initial neutral target for controlled ionization. Unlike our previous studies of laser-matter interaction over preformed plasma, we explore the injection and collision of laser pulses to induce background plasma driven by the self-guided laser wakefield mechanism, which is then used to perturb the plasma resulting in induced dipole oscillations leading to transverse radiation. Inducing a cylindrical spatial plasma column within the laser beam radius regime provides a stable, spatially localized plasma channel. The emitted radiation from the plasma dipole oscillation (PDO) will not be affected by surrounding plasma absorption, resulting in effective radiation distribution. Finally, results include 3D EM-PIC simulations and a comparison of the self- ionizing plasma against the preformed plasma to assess the efficiency of the mechanisms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Numerical Simulation with Experimental Validation of the Draping Behavior of Woven Fabrics

Woven fabric composites are extensively used in molding complex geometrical shapes due to their high conformability compared to other fabrics. Preforming is an important step in the overall process. In this step, the two-dimensional fabric is draped to become the three-dimensional shape of the part prior to resin injection. During preforming, the orientation of the tows may change significantly compared to the initial orientations. Accurate prediction of the tow orientations after molding is important for evaluating the structural performance of the final part. This paper investigates the fiber angle changes for carbon fiber woven fabrics during draping over a truncated pyramid tool designed and fabricated at the General Motors Research Labs. This aspect of study is a subset of the broad study conducted under the purview of a Department of Energy project funded to GM in developing state of the art computational tools for integrated manufacturing and structural performance prediction of carbon fiber composites. Fabric bending, picture frame testing, and bias-extension evaluations were carried out to determine the material parameters for these fabrics. The PAM-FORM computer program was used to model the draping behavior of these fabrics. Following deformation, fiber angle changes at different locations on the truncated pyramid were measured experimentally. The predicted angles matched the experimental results well as measured along the centerline and at several different locations on the deformed fabric. Details of the test methods used as well as the numerical results with various simulation parameters will be provided.

42 ENGINEERING↗

Near-Net Shape Fabrication Using Low-Cost Titanium Alloy Powders

The use of titanium in commercial aircraft production has risen steadily over the last half century. The aerospace industry currently accounts for 58% of the domestic titanium market. The Kroll process, which has been used for over 50 years to produce titanium metal from its mineral form, consumes large quantities of energy. And, methods used to convert the titanium sponge output of the Kroll process into useful mill products also require significant energy resources. These traditional approaches result in product forms that are very expensive, have long lead times of up to a year or more, and require costly operations to fabricate finished parts. Given the increasing role of titanium in commercial aircraft, new titanium technologies are needed to create a more sustainable manufacturing strategy that consumes less energy, requires less material, and significantly reduces material and fabrication costs. A number of emerging processes are under development which could lead to a breakthrough in extraction technology. Several of these processes produce titanium alloy powder as a product. The availability of low-cost titanium powders may in turn enable a more efficient approach to the manufacture of titanium components using powder metallurgical processing. The objective of this project was to define energy-efficient strategies for manufacturing large-scale titanium structures using these low-cost powders as the starting material. Strategies include approaches to powder consolidation to achieve fully dense mill products, and joining technologies such as friction and laser welding to combine those mill products into near net shape (NNS) preforms for machining. The near net shape approach reduces material and machining requirements providing for improved affordability of titanium structures. Energy and cost modeling was used to define those approaches that offer the largest energy savings together with the economic benefits needed to drive implementation. Technical feasibility studies were performed to identify the most viable approaches to NNS preform fabrication using basic powder metallurgy mill product forms as the building blocks and advanced joining techniques including fusion and solid state joining to assemble these building blocks into efficient machining performs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗