Search NASA⌕ Search

SEARCH · Search NASA

Results for “pressure points”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Turbulent pressure field in a co-annular jet

Single point and two-point fluctuating static pressure measurements have been made in the initial mixing and transition regions in a co-annular circular jet. Space scales, correlation and time scales in the convected frame, and convection velocities have been determined for both broad band and narrow band frequency components. Analytical functionals describing the structural behavior of the turbulent pressure field have been developed from the data which are suitable for direct application in predicting the sound power level radiated from this turbulent field. Effects of both area and velocity ratios are incorporated in the model.

Hammersley, R. J.↗
DOE OSTI2024

Bubble Point Measurements of cis-1,1,1,4,4,4-Hexafluorobutene [R-1336mzz(Z)] + trans-1,2-Dichloroethene [R-1130(E)] mixtures

Saturation pressures of pure R-1336mzz(Z) and R-1130(E) and bubble point pressures of three R-1336mzz(Z)/1130(E) blends were measured from 265 K to 360 K. For each pure refrigerant or refrigerant blend, a total of twenty unique saturation pressures or bubble points were measured. In total 100 unique state points were obtained. Presently, no Helmholtz-energy-explicit type equation of state (EoS) is available for R-1130(E). While an extended corresponding states EoS for R-1130(E) is available to estimate the properties of the R-1336mzz(Z)/1130(E) blend, this model does not resolve the azeotropic behavior of the mixture. Therefore, the perturbed-chain statistical-associating fluid theory (PC-SAFT) EoS is used to model the vapor–liquid equilibria of the R-1336mzz(Z)/1130(E) blend. PC-SAFT model parameters are reported, and the overall performance of the model is characterized by deviations from the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Applications of liquid state physics to the earth's core

New results derived for application to the earth's outer core using the modern theory of liquids and the hard-sphere model of liquid structure are presented. An expression derived in terms of the incompressibility and pressure is valid for a high-pressure liquid near its melting point, provided that the pressure is derived from a strongly repulsive pair potential; a relation derived between the melting point and density leads to a melting curve law of essentially the same form as Lindemann's law. Finally, it is shown that the 'core paradox' of Higgins and Kennedy (1971) can occur only if the Gruneisen parameter is smaller than 2/3, and this constant is larger than this value in any liquid for which the pair potential is strongly repulsive.

Stevenson, D. J.↗
NASA NTRS1991

Static pressure measurements in A 30 kWe class arcjet

A series of cold and hot flow static pressure measurements have been made as a function of distance along the principal axis of a 30 kWe arcjet. During these experiments, the background pressure was varied from atmospheric pressure to less than 1 Torr. The experimental arcjet used in these tests had the same constrictor and conical nozzle dimensions as the baseline MOD-1 ammonia arcjet developed at NASA-JPL, but used nitrogen as the propellant gas. Comparison of the measured static pressure profiles with the arc erosion patterns on the anode surface showed that anode arc attachment points directly coincided with the minimum static pressure points. The dual voltage modes commonly observed in 30 kWe class arcjet thrusters are also believed to be caused by the presence of two pressure minima in the arcjet, one at the constrictor entrance and the other in the expansion nozzle. The static pressure profiles also suggest that the sonic flow transition occurs at the entrance to the nozzle, indicating the existence of very thick boundary layers in the arcjet constrictor.

Harris, William J.↗
NASA NTRS1990

Controlling Gas-Flow Mass Ratios

Proposed system automatically controls proportions of gases flowing in supply lines. Conceived for control of oxidizer-to-fuel ratio in new gaseous-propellant rocket engines. Gas-flow control system measures temperatures and pressures at various points. From data, calculates control voltages for electronic pressure regulators for oxygen and hydrogen. System includes commercially available components. Applicable to control of mass ratios in such gaseous industrial processes as chemical-vapor depostion of semiconductor materials and in automotive engines operating on compressed natural gas.

Morris, Brian G.↗
NASA NTRS2014

Ice Crystal Icing Engine Testing in the NASA Glenn Research Center's Propulsion Systems Laboratory: Altitude Investigation

The National Aeronautics and Space Administration (NASA) conducted a full scale ice crystal icing turbofan engine test using an obsolete Allied Signal ALF502-R5 engine in the Propulsion Systems Laboratory (PSL) at NASA Glenn Research Center. The test article used was the exact engine that experienced a loss of power event after the ingestion of ice crystals while operating at high altitude during a 1997 Honeywell flight test campaign investigating the turbofan engine ice crystal icing phenomena. The test plan included test points conducted at the known flight test campaign field event pressure altitude and at various pressure altitudes ranging from low to high throughout the engine operating envelope. The test article experienced a loss of power event at each of the altitudes tested. For each pressure altitude test point conducted the ambient static temperature was predicted using a NASA engine icing risk computer model for the given ambient static pressure while maintaining the engine speed.

Altitude Testing↗
NASA NTRS1975

The possibility of using superconductive systems in the analysis of the composition of cosmic rays

The experimental results on the use of superconductive systems onboard of spacecraft are described. To ensure low temperatures in the cryostat under weightlessness, helium was used at a pressure above the critical pressure. In flight, the temperature was controlled at six points, while the pressure and intensity of the magnetic field were controlled in the solenoids. The methodical test proved it possible to mount special installations on satellites, with extensive magnetic fields based on superconductive alloys, and particularly, low weights and low power consumption magnetic analyzers.

Anashkin, O. P.↗
DOE OSTI2020

Novel Hot-Spot Ignition Designs for Inertial Confinement Fusion with Liquid-Deuterium-Tritium Spheres

A new class of ignition designs is proposed for inertial confinement fusion (ICF) experiments. These designs are based on the hot-spot-ignition approach, but instead of conventional targets that comprise of spherical shells with thin frozen deuterium{tritium (DT) layers, homogeneous-density (solid or liquid) DT spheres are used where the lower-density central region and higher-density shell are created dynamically by appropriately shaping the laser pulse. These offer several advantages, including simplicity in target production and lower sensitivity to both laser imprint and physics uncertainty in shock interaction with the ice-vapor interface. The design evolution starts by launching an ~1-Mbar shock into a homogeneous DT sphere. After bouncing from the center, the reflected shock reaches the outer surface of the sphere and the shocked material starts to expand outward until its pressure drops below the ablation pressure. At this point, an adjustment shock is launched inward by supporting ablation pressure. This shock compresses the ablator and fuel, forming a shell. The shell is then accelerated and compressed by appropriately shaping the drive laser pulse, similar to the conventional thin-shell, hot-spot designs. Here, this paper demonstrates the feasibility of the new concept using hydrodynamic simulations and discusses the advantages and disadvantages of the concept compared with more-traditional ICF designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Pressure-induced creation and annihilation of Weyl points in T d - Mo 0.5 W 0.5 Te 2 and 1 T " - Mo 0.5 W 0.5 Te 2

By means of first-principles density-functional theory calculations, we investigate the role of hydrostatic pressure in the electronic structure of the T d (Pmn2 1 ) and 1T" (Pm) phases of the Weyl semimetal Mo 0.5 W 0.5 Te 2 , which is a promising material for phase-change memory technology and superconductivity. We particularly focus on changes occurring in the distribution of the gapless Weyl points (WPs) within the 0 to 45 GPa pressure range. Here we further investigate the structural phase transition and lattice dynamics of the T d and 1T" phases within the aforementioned pressure range. Our calculations suggest that both the T d and 1T" phases of Mo 0.5 W 0.5 Te 2 host four WPs in their full Brillouin zone at zero pressure. The total number of WPs increases to 44 (36) with increasing pressure via pair creation up to 20 (15) GPa for the T d (1T") phase, and beyond this pressure pair annihilation of WPs starts occurring, leaving only 16 WPs at 45 GPa in both phases. The enthalpy versus pressure data reveal that the 1T" phase is more favorable below the critical pressure of 7.5 GPa; however, beyond this critical pressure the T d phase becomes enthalpically favorable. We also provide the calculated x-ray diffraction spectra along with the calculated Raman- and infrared-active phonon frequencies to facilitate the experimental identification of the studied phases

36 MATERIALS SCIENCE↗
NASA NTRS1992

An approach to constrained aerodynamic design with application to airfoils

An approach was developed for incorporating flow and geometric constraints into the Direct Iterative Surface Curvature (DISC) design method. In this approach, an initial target pressure distribution is developed using a set of control points. The chordwise locations and pressure levels of these points are initially estimated either from empirical relationships and observed characteristics of pressure distributions for a given class of airfoils or by fitting the points to an existing pressure distribution. These values are then automatically adjusted during the design process to satisfy the flow and geometric constraints. The flow constraints currently available are lift, wave drag, pitching moment, pressure gradient, and local pressure levels. The geometric constraint options include maximum thickness, local thickness, leading-edge radius, and a 'glove' constraint involving inner and outer bounding surfaces. This design method was also extended to include the successive constraint release (SCR) approach to constrained minimization.

Campbell, Richard L.↗
DOE OSTI2022

Predicting Melt Curves of Energetic Materials Using Molecular Models

Here, in this work, the solid–liquid coexistence curves of classical fully flexible atomistic models of α-RDX and β-HMX were calculated using thermodynamically rigorous methodologies that identify where the free energy difference between the phases is zero. The free energy difference between each phase at a given state point was computed using the pseudosupercritical path (PSCP) method, and Gibbs–Helmholtz integration was used to evaluate the solid–liquid free energy difference as a function of temperature. This procedure was repeated for several pressures to determine points along the coexistence curve, which were then fit to the Simon–Glatzel functional form. While effective, this method is computationally expensive. An alternative approach is to compute the melting point at a single pressure via the PSCP method, and then use the Gibbs–Duhem integration technique to trace out the coexistence curve in a more computationally economical manner. Both approaches were used to determine the coexistence curve of α-RDX. The Gibbs–Duhem integration method was shown to generate a melt curve that is in good agreement with the PSCP-derived melt curve, while only costing ~10 % of the computational resources used for the PSCP method. For α-RDX, the predicted melting temperature increases significantly more for a given increase in pressure when compared to available experimental data.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS2016

Optic Nerve Sheath Mechanics in VIIP Syndrome

Visual Impairment Intracranial Pressure (VIIP) syndrome is a major concern in current space medicine research. While the exact pathology of VIIP is not yet known, it is hypothesized that the microgravity-induced cephalad fluid shift increases intracranial pressure (ICP) and drives remodeling of the optic nerve sheath. To investigate this possibility, we are culturing optic nerve sheath dura mater samples under different pressures and investigating changes in tissue composition. To interpret results from this work, it is essential to first understand the biomechanical response of the optic nerve sheath dura mater to loading. Here, we investigated the effects of mechanical loading on the porcine optic nerve sheath.Porcine optic nerves (number: 6) were obtained immediately after death from a local abattoir. The optic nerve sheath (dura mater) was isolated from the optic nerve proper, leaving a hollow cylinder of connective tissue that was used for biomechanical characterization. We developed a custom mechanical testing system that allowed for unconfined lengthening, twisting, and circumferential distension of the dura mater during inflation and under fixed axial loading. To determine the effects of variations in ICP, the sample was inflated (0-60 millimeters Hg) and circumferential distension was simultaneously recorded. These tests were performed under variable axial loads (0.6 grams - 5.6 grams at increments of 1 gram) by attaching different weights to one end of the dura mater. Results and Conclusions: The samples demonstrated nonlinear behavior, similar to other soft connective tissue (Figure 1). Large increases in diameter were observed at lower transmural pressures (approximately 0 to 5 millimeters Hg), whereas only small diameter changes were observed at higher pressures. Particularly interesting was the existence of a cross-over point at a pressure of approximately 11 millimeters Hg. At this pressure, the same diameter is obtained for all axial loads applied to the tissue; i.e., as the axial load is varied, the diameter of the dura mater remains constant. This cross-over in the pressure-diameter curves occurred in all optic nerve sheaths that were tested, and may correspond with in vivo ICP levels for pigs. These data suggest that diameter of the dura mater of the optic nerve remains nearly constant in vivo despite being stretched axially. This may be a homeostatic mechanism aimed at maintaining target stresses/strains on the cells in the dura mater, and deviations from these stresses may play an important role in optic nerve sheath remodeling. Future studies will involve subjecting the dura mater to varying pressures and axial tensions for extended periods of time, while monitoring changes in the biomechanical properties. The data can then be used to study the effects of changes in ICP on the remodeling of the dura mater.

biomechanics↗
DOE OSTI2026

Kondo effect in ferromagnetic quantum critical CeRh 6 ⁢Ge 4

The mechanism of a pressure-induced quantum critical point in the heavy fermion ferromagnet CeRh 6 ⁢Ge 4 has attracted interest, as ferromagnetic quantum criticality in a clean itinerant Ce compound is typically avoided. The localized versus itinerant character of the 4⁢𝑓 electrons is a key aspect for understanding this behavior. We investigated the electronic structure of the 4⁢𝑓 shell in CeRh 6 ⁢Ge 4 using core-level photoelectron and x-ray absorption spectroscopy, demonstrating the hybridization of Ce 4⁢𝑓 with the conduction electrons. Linearly polarized x-ray absorption reveals a temperature-dependent linear dichroism consistent with the crystal-electric-field sequence as inferred from the static susceptibility. This dichroism cannot be described by an ionic full-multiplet model alone, but is reproduced by including the Kondo effect within a single-impurity Anderson model in the noncrossing approximation. The Kondo effect mixes higher-lying crystal-field states into a resulting multiorbital ground state with 4⁢𝑓 occupancy, 𝑛 𝑓 ∼ 0.9. Deviations at low temperatures between the measured linear dichroism and calculated dichroism suggest an orbital-dependent Kondo effect. A scenario in which there is a multiorbital ground state and orbital-dependent Kondo hybridization should be a starting point for a model of pressure-induced criticality in CeRh 6 ⁢Ge 4 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1973

Application of finite difference techniques to noise propagation in jet engine ducts

A finite difference formulation is presented for wave propagation in a rectangular two-dimensional duct without steady flow. The difference technique, which should be useful in the study of acoustically treated inlet and exhausts ducts used in turbofan engines, can readily handle acoustical flow field complications such as axial variations in wall impedance and cross section area. In the numerical analysis, the continuous acoustic field is lumped into a series of grid points in which the pressure and velocity at each grid point are separated into real and imaginary terms. An example calculation is also presented for the sound attenuation in a two-dimensional straight soft-walled suppressor.

Baumeister, K. J.↗
NASA NTRS1973

Application of finite difference techniques to noise propagation in jet engine ducts

A finite difference formulation is presented for wave propagation in a rectangular two-dimensional duct without steady flow. The difference technique, which should be used in the study of acoustically treated inlet and exhausts ducts used in turbofan engines, can readily handle acoustical flow field complications such as axial variations in wall impedance and cross-section area. In the numerical analysis, the continuous acoustic field is lumped into a series of grid points in which the pressure and velocity at each grid point are separated into real and imaginary terms. An example calculation is also presented for the sound attenuation in a two-dimensional straight soft-walled suppressor.

Baumeister, K. J.↗