Search NASA⌕ Search

SEARCH · Search NASA

Results for “products comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Ammonia Synthesis under Ambient Conditions: Insights into Water–Nitrogen–Magnetite Interfaces

New routes for transforming nitrogen into ammonia at ambient conditions would be a milestone toward an energy efficient and economically attractive production route in comparison to the traditional Haber-Bosch process. Recently, the synthesis of ammonia from water and nitrogen at room temperature and atmospheric pressure has been reported to be catalyzed by Fe 3 O 4 at the air-water interface. By integrating ambient pressure X-ray photoelectron spectroscopy and ab initio molecular dynamics and free energy calculations, we investigate the underlying thermodynamic mechanisms governing ammonia and hydrazine formation at the water-Fe 3 O 4 -nanoparticle interface. Here, we find that, unlike pure Fe 3 O 4 where N 2 can only interact with a limited number of Fe sites, hydroxylated species introduce large and diverse adsorption geometries where N 2 can bind through either Fe sites or Fe-OH groups, each of which are capable of independently facilitating proton-coupled electron transfer.

Chandy, Sruthy K. [University of California, Berke↗
DOE OSTI2023

AmeriFlux BASE data pipeline to support network growth and data sharing

Abstract AmeriFlux is a network of research sites that measure carbon, water, and energy fluxes between ecosystems and the atmosphere using the eddy covariance technique to study a variety of Earth science questions. AmeriFlux’s diversity of ecosystems, instruments, and data-processing routines create challenges for data standardization, quality assurance, and sharing across the network. To address these challenges, the AmeriFlux Management Project (AMP) designed and implemented the BASE data-processing pipeline. The pipeline begins with data uploaded by the site teams, followed by the AMP team’s quality assurance and quality control (QA/QC), ingestion of site metadata, and publication of the BASE data product. The semi-automated pipeline enables us to keep pace with the rapid growth of the network. As of 2022, the AmeriFlux BASE data product contains 3,130 site years of data from 444 sites, with standardized units and variable names of more than 60 common variables, representing the largest long-term data repository for flux-met data in the world. The standardized, quality-ensured data product facilitates multisite comparisons, model evaluations, and data syntheses.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Benchmark eA generator for leptoproduction in high-energy lepton-nucleus collisions

The upcoming electron-ion collider (EIC) will address several outstanding puzzles in modern nuclear physics. Topics such as the partonic structure of nucleons and nuclei, the origin of their mass and spin, among others, can be understood via the study of high-energy electron-proton (ep) and electron-nucleus (eA) collisions. Achieving the scientific goals of the EIC will require a novel electron-hadron collider and detectors capable to perform high-precision measurements but also dedicated tools to model and interpret the data. To aid in the latter, we present a general-purpose e A Monte Carlo generator—BeAGLE. In this paper, we provide a general description of the models integrated into BeAGLE, applications of BeAGLE in eA physics, implications for detector requirements at the EIC, and the tuning of the parameters in BeAGLE based on available experimental data. Specifically, we focus on a selection of model and data comparisons in particle production in both ep and eA collisions, where baseline particle distributions provide essential information to characterize the event. In addition, we investigate the collision geometry determination in eA collisions, which could be used as an experimental tool for varying the nuclear density.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Oxygen Reduction on Platinum-Nickel and Platinum-Cobalt Alloy Based Catalysts for High Temperature Proton Exchange Membrane Fuel Cells

Catalyst layers, with commercial PtNi/TKK (TECNiE52; platinum 46.5 wt%), PtCo/TKK (TEC36E52; platinum 45.8 wt%) catalysts, and an in-house catalyst PtNi-NC (platinum 38.4 wt%), synthesised using acoustic mixer and a tube furnace, are prepared using three different ionomers: 20 wt% Nafion®, 60 wt% polytetrafluoroethylene (PTFE), and an in-house 5 wt% ionomer (‘Ionomer X’). These inks are bar-coated onto carbon paper gas diffusion layers (GDLs), which are cut into 3 cm × 5 cm pieces. The coated layers are tested for oxygen reduction in a commercial gas diffusion electrode (GDE) test cell, FlexCell® (Gaskatel GmbH, Germany), using 85 wt% phosphoric acid at both room temperature and at 155°C. This study evaluates the polynorbornene (PNB)-based in-house ionomer performance as binder and in-house catalyst oxygen reduction reaction (ORR) activity in comparison to commercial products. The catalyst layers are characterised using X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy (XPS), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Among the catalyst layers prepared with PTFE ionomer and tested at 155°C, the in-house catalyst demonstrates the highest ORR activity. Ionomer X proves to be a good candidate to be used as a per- and polyfluoroalkyl-free binder for high-temperature (HT) proton exchange membrane fuel cell (PEMFC) applications.

85 wt% phosphoric acid↗
DOE OSTI2022

Proceedings of RIKEN BNL Research Center Workshop: Predictions for sPHENIX [Slides]

To complete the RHIC mission, sPHENIX was specifically designed to measure jet and heavy-flavor observables with a level of precision not previously achievable at RHIC. This will enhance our understanding of the quark-gluon plasma (QGP) properties and their temperature dependence beyond what is possible with existing and planned data from the LHC and other RHIC experiments. A major goal of the sPHENIX program is to address the question of the approach to thermalization of the quark-gluon plasma and its transport properties using hard probes such as jets and heavy flavor. The current three-year run plan includes Au+Au, p+Au and p+p collisions at 200 GeV. The Au+Au dataset provides a large QGP system to study the QGP properties. The p+Au dataset will allow for additional studies of the intriguing behavior observed in flow measurements from other RHIC experiments as well as transport properties of cold QCD matter and proton/nuclear structure. The p+p collisions provide a necessary reference for Au+Au and p+Au collisions and also allow for additional studies of proton structure. Anticipated measurements include but are not limited to, jet substructure observables, photon and heavy flavor tagged jets as well as comparisons of the production of the different upsilon states in all three collision systems. To maximize the rich physics sPHENIX is capable of accessing, this workshop will enhance the discussions between the experimentalists making the measurements and the theorists whose models will be tested and constrained by the new data. Since sPHENIX will start taking data in early 2023, this workshop is timely for theorists wishing to make final predictions of anticipated observables before data collection commences. In addition, it will provide an opportunity for theorists and experimentalists to propose and discuss new observables.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

THz Radiation Generation to Enable Internal Magnetic Field Measurement of Burning Plasmas (Final Scientific Report)

A one-year experimental program was performed using the Multi-TeraWatt (MTW) laser at the Laboratory for Laser Energetics (LLE) to investigate the efficiency and physical process of laser-driven—wire THz generation. This process was evaluated as a potential high-repetition-rate source of powerful THz pulses for use in THz pulsed polarimetry of a moderate-density magnetic-confinement fusion concept developed by TAE. The goal was to develop a source for short pulses in the THz regime (150 μm wavelength) containing 10’s of mJ. The campaign tested the impact of Cu wire diameter (25, 75, 160 μm), length (250 – 750 μm), and laser irradiation orientation on THz production efficiency in comparison to 20-μm thick Cu foils. Of these targets, the 160 µm diameter, 750 µm long wires with sharpened tips and irradiated at the base were found to produce the highest energy and shortest wavelength THz pulses, exceeding 2.5 Joule/sr and meeting the requirements for the polarimetry diagnostic. The brightest THz signal was radiated in the direction of the sharpened wire tip. A combination of two models – a traveling wave antenna combined with coherent transition radiation – describes the emission pattern, pulse energy, and spectrum observed in the experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1976

Producibility aspects of advanced composites for an L-1011 Aileron

The design of advanced composite aileron suitable for long-term service on transport aircraft includes Kevlar 49 fabric skins on honeycomb sandwich covers, hybrid graphite/Kevlar 49 ribs and spars, and graphite/epoxy fittings. Weight and cost savings of 28 and 20 percent, respectively, are predicted by comparison with the production metallic aileron. The structural integrity of the design has been substantiated by analysis and static tests of subcomponents. The producibility considerations played a key role in the selection of design concepts with potential for low-cost production. Simplicity in fabrication is a major factor in achieving low cost using advanced tooling and manufacturing methods such as net molding to size, draping, forming broadgoods, and cocuring components. A broadgoods dispensing machine capable of handling unidirectional and bidirectional prepreg materials in widths ranging from 12 to 42 inches is used for rapid layup of component kits and covers. Existing large autoclaves, platen presses, and shop facilities are fully exploited.

Van Hamersveld, J.↗
NASA NTRS1980

Vehicle testing of Cummins turbocompound diesel engine

Two turbocompound diesel engines were installed in Class VIII heavy-duty vehicles to determine the fuel consumption potential and performance characteristics. One turbocompound powered vehicle was evaluated at the Cummins Pilot Center where driveability, fuel consumption, torsional vibration, and noise were evaluated. Fuel consumption testing showed a 14.8% benefit for the turbocompound engine in comparison to a production NTC-400 used as a baseline. The turbocompound engine also achieved lower noise levels, improved driveability, improved gradeability, and marginally superior engine retardation. The second turbocompound engine was placed in commercial service and accumulated 50,000 miles on a cross-country route without malfunction. Tank mileage revealed a 15.92% improvement over a production NTCC-400 which was operating on the same route.

Brands, M. C.↗
NASA NTRS1983

Networking DEC and IBM computers

Local Area Networking of DEC and IBM computers within the structure of the ISO-OSI Seven Layer Reference Model at a raw signaling speed of 1 Mops or greater are discussed. After an introduction to the ISO-OSI Reference Model nd the IEEE-802 Draft Standard for Local Area Networks (LANs), there follows a detailed discussion and comparison of the products available from a variety of manufactures to perform this networking task. A summary of these products is presented in a table.

Mish, W. H.↗
NASA NTRS1982

Finding the lost river gas field - Lineament density analysis in hydrocarbon exploration

A comparative trial analysis of lineament density in 1:500,000 Landsat and 1:48,000 aerial Landsat-simulator images of a gas-field region in West Virginia is presented. The high-contrast, band 4, 5, 7 color composite Landsat image was interpreted independently by two analysts. The slightly different lineament maps were evaluated in terms of lineament-density variation in 10 x 10-km areas, and the resulting areal-variation maps are found to be statistically equivalent. High lineament density is shown to be associated with productive gas wells. Comparison of ground-based substructural contour maps and lineament-density analyses of the Landsat-simulator images reveals good correlation between density maxima or isopleths and substructural features associated with hydrocarbon formations. A hydrocarbon-exploration strategy using both Landsat and aerial images is proposed.

Lang, H. R.↗
NASA NTRS1986

Transport model of nucleon-nucleus reaction

A simplified model of nucleon-nucleus reaction is developed and some of its properties are examined. Comparisons with proton production measured for targets of Al-27, Ni-58, Zr-90, and Bi-209 show some hope for developing an accurate model for these complex reactions. It is suggested that binding effects are the next step required for further development.

Wilson, J. W.↗
NASA NTRS1993

The production of premixed flame surface area in turbulent shear flow

In the present work, we use three-dimensional Direct Numerical Simulation (DNS) of premixed flames in turbulent shear flow to characterize the effect of a mean shear motion on flame surface production. The shear is uniform in the unburnt gas, and simulations are performed for different values of the mean shear rate, S. The data base is then used to estimate and compare the different terms appearing in the Sigma-equation as a function of S. The analysis gives in particular the relative weights f the turbulent flow and mean flow components, a(sub T) and A(sub T), of the flame surface production term. This comparison indicates whether the dominant effects of a mean flow velocity gradient on flame surface area are implicit and scale with the modified turbulent flow parameters, kappa and epsilon, or explicit and scale directly with the rate of deformation.

Trouve, A.↗
NASA NTRS1999

The First Year of TRMM and its Connection to a Global Precipitation Measuring System

This presentation will focus primarily on the advances in our understanding of tropical rain systems needed to interpret the TRMM data. Global averages, as well as case studies from TRMM radar (PR), the TRMM Microwave Imager (TMI) and Visible and Infrared Sensor (VIRS) will be presented. Comparisons and contrasts among the different sensors will be drawn. The relationship between excessive cold clouds and lightning will be illustrated. Comparisons between rainfall products show fairly good agreement outside the deep tropics. The deep tropics will be examined in greater detail to highlight differences and possible sources of discrepancies. Results will also be compared to previous rainfall climatologies generated from the SSM/I instrument. Finally, the paper will focus upon the relationship between the estimates made from the TRMM sensor and those made from ground based radars and preliminary conclusions as well as steps being taken to continue improving our understanding will be presented.

Kummerow, Christian↗
NASA NTRS2000

Automation and Upgrade of Thermal System for Large 38-Year-Young Test Facility

The Goddard Space Flight Center's Space Environment Simulator (SES) facility has been improved by the upgrade of its thermal control hardware and software. This paper describes the preliminary design process, funding constraints, and the proposed enhancements as well as the installation details, the testing difficulties, and the overall benefits realized from this upgrade. The preliminary design process was discussed in a paper presented in October 1996 and will be recapped in this paper to provide background and comparison to actual product. Structuring the procurement process to match the funding constraints allowed Goddard to enhance its capabilities in an environment of reduced budgets. The installation of the new system into a location that has been occupied for over 38 years was one of the driving design factors for the size of the equipment. The installation was completed on time and under budget. The tuning of the automatic sequences for the new thermal system to the existing shroud system required more time and ultimately presented some setbacks to the vendor and the final completion of the system. However, the end product and its benefits to Goddard's thermal vacuum test portfolio will carry the usefulness of this facility well into the next century.

Webb, Andrew T.↗
NASA NTRS2000

Automation and Upgrade of Thermal System for Large 38-Year Young Test Facility

The Goddard Space Flight Center's Space Environment Simulator (SES) facility has been improved by the upgrade of its thermal control hardware and software. This paper describes the preliminary design process, funding constraints, and the proposed enhancements as well as the installation details, the testing difficulties, and the overall benefits realized from this upgrade. The preliminary design process was discussed in a paper presented in October 1996 and will be recapped in this paper to provide background and comparison to actual product. Structuring the procurement process to match the funding constraints allowed Goddard to enhance its capabilities in an environment of reduced budgets. The installation of the new system into a location that has been occupied for over 38-years was one of the driving design factors for the size of the equipment. The installation was completed on-time and under budget. The tuning of the automatic sequences for the new thermal system to the existing shroud system required more time and ultimately presented some setbacks to the vendor and the final completion of the system. However, the end product and its benefits to Goddard's thermal vacuum test portfolio will carry the usefulness of this facility well into the next century.

Webb, Andrew↗
NASA NTRS2003

Advanced Propulsion System Studies for General Aviation Aircraft

In this study, new technology engines were defined in two power classes: a 200 hp class, for a light, 4-place personal aircraft, and a 1500 pound thrust class for a twin-engined, 6 place business jet type aircraft. The engines were evaluated for retrofitting suitable current production aircraft for comparison to the existing engines. The engines were evaluated for performance using a typical mission for each aircraft, as well as a variant mission to further appraise performance.Issues of cost, safety, maintenance, and reliability were also addressed. Manufacturing plans were then constructed.

Eisenberg, Joseph D.↗
NASA NTRS2004

Status of TRMM Ground Validation Program at NASA GSFC

The TRMM Ground Validation (GV) program at NASA GSFC has made considerable progress: over the last several years. The GV program now has a Complete record of Level I-HI products from the Kwajaiein and Melbourne, Florida sites. Current emphasis is to eliminate the remaining backlog for the Houston, Texas and Darwin, Australia sites. This paper provides details on the status of our data processing efforts, defines accuracy estimates of the various GV rain products, end shows comparisons between GV rain intensities and accumulations to satellite retrievals over the GV sites. We will show that the Version 6a TRMM TMI and PR, at leas! over ocean areas of the GV sites, are within +/- 10% of the Version 5 GV estimates at least over open Ocean areas, away from contaminating effects of land and coastal regions.

Wolff, David B.↗
NASA NTRS2006

Remote Sensing Time Series Product Tool

The TSPT (Time Series Product Tool) software was custom-designed for NASA to rapidly create and display single-band and band-combination time series, such as NDVI (Normalized Difference Vegetation Index) images, for wide-area crop surveillance and for other time-critical applications. The TSPT, developed in MATLAB, allows users to create and display various MODIS (Moderate Resolution Imaging Spectroradiometer) or simulated VIIRS (Visible/Infrared Imager Radiometer Suite) products as single images, as time series plots at a selected location, or as temporally processed image videos. Manually creating these types of products is extremely labor intensive; however, the TSPT development tool makes the process simplified and efficient. MODIS is ideal for monitoring large crop areas because of its wide swath (2330 km), its relatively small ground sample distance (250 m), and its high temporal revisit time (twice daily). Furthermore, because MODIS imagery is acquired daily, rapid changes in vegetative health can potentially be detected. The new TSPT technology provides users with the ability to temporally process high-revisit-rate satellite imagery, such as that acquired from MODIS and from its successor, the VIIRS. The TSPT features the important capability of fusing data from both MODIS instruments onboard the Terra and Aqua satellites, which drastically improves cloud statistics. With the TSPT, MODIS metadata is used to find and optionally remove bad and suspect data. Noise removal and temporal processing techniques allow users to create low-noise time series plots and image videos and to select settings and thresholds that tailor particular output products. The TSPT GUI (graphical user interface) provides an interactive environment for crafting what-if scenarios by enabling a user to repeat product generation using different settings and thresholds. The TSPT Application Programming Interface provides more fine-tuned control of product generation, allowing experienced programmers to bypass the GUI and to create more user-specific output products, such as comparison time plots or images. This type of time series analysis tool for remotely sensed imagery could be the basis of a large-area vegetation surveillance system. The TSPT has been used to generate NDVI time series over growing seasons in California and Argentina and for hurricane events, such as Hurricane Katrina.

Predos, Don↗