Search NASA⌕ Search

SEARCH · Search NASA

Results for “proxy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Pale Blue Dot Explorer: A Case for Adding Earth to the Planetary Sciences List of Targets

Obtaining observational data to inform the science of future missions focused on Earth-like exoplanets is of prime importance for NASA Planetary Science and Astrobiology. However, Earth observations as a proxy for an exoplanet is an area of interdivisional research not well captured by existing NASA programs. To accommodate this, we propose adding Earth to the list of planets allowable by NASA Planetary Science Division’s objectives and adding Earth observation to the cruise phase of planetary probes. A specific research investigation would be a spacecraft whose goal would be to characterize Earth as an exoplanet proxy — a Pale Blue Dot Explorer. Such a mission’s objective would be to monitor the habitability and biological signatures of Earth in reflected light over broad wavelengths and phase angles.

Sanjoy M. Som↗

Linkage among Ice Crystal Microphysics, Mesoscale Dynamics and Cloud and Precipitation Structures Revealed By Collocated Microwave Radiometer and Multi-Frequency Radar Observations

Ice clouds and falling snow are ubiquitous globally and play important roles in the Earth’s radiation budget and precipitation processes. Ice particle microphysical properties (e.g., size, habit and orientation) are not only influenced by ambient environment’s dynamic and thermodynamic conditions, but also intimately connect to the cloud radiative effects and particle fall speeds, which therefore impact up to the future climate projection and down to the details of the surface precipitation (e.g., onset-time, location, type and strength). Our previous work revealed that high-frequency Polarimetric radiance Difference (PD) from passive microwave sensors is a good indicator of the bulk aspect ratio of horizontally oriented ice particles that are often occur inside anvil clouds and/or stratiform precipitations. In this current work, we further investigate the dynamic/thermodynamic mechanisms and cloud/precipitation structures associated with ice-phase microphysics corresponding to different PD signals. In order to do so, collocated CloudSat radar (W-band) and Global Precipitation Measurement Dual-frequency Precipitation Radar (GPM-DPR, Ku/Ka bands) observations as well as European Centre for Medium-Range Weather Forecasts (ECMWF) atmosphere background profiles are grouped according to the magnitude of PD for only stratiform precipitation and/or anvil cloud scenes. We found that horizontally-oriented snow aggregates or large snow particles are likely the major contributor to the high-PD signals at 166 GHz, while low-PD magnitudes can be attributed to small cloud ice, randomly oriented snow aggregates, riming snow or super-cooled water. Further, high (low) PD scenes are found to be associated with stronger (weaker) wind shear and higher (lower) ambient humidity, both of which help promote (prohibit) the growth of frozen particles and the organization of convective systems. An ensemble of squall line cases is studied at the end to demonstrate that the PD asymmetry in the leading and trailing edges of the deep convection line is closely tied to the anvil cloud and stratiform precipitation layers respectively, suggesting the potential usefulness of PD as a proxy of stratiform/convective precipitation flag, as well as a proxy of convection life stage.

Ice crystal microphysics↗

Evaluation of Arctic Warming in Mid-Pliocene Climate Simulations

Palaeoclimate simulations improve our understanding of the climate, inform us about the performance of climate models in a different climate scenario, and help to identify robust features of the climate system. Here, we analyse Arctic warming in an ensemble of 16 simulations of the mid-Pliocene Warm Period (mPWP), derived from the Pliocene Model Intercomparison Project Phase 2 (PlioMIP2). The PlioMIP2 ensemble simulates Arctic (60–90∘ N) annual mean surface air temperature (SAT) increases of 3.7 to 11.6 ∘C compared to the pre-industrial period, with a multi-model mean (MMM) increase of 7.2 ∘C. The Arctic warming amplification ratio relative to global SAT anomalies in the ensemble ranges from 1.8 to 3.1 (MMM is 2.3). Sea ice extent anomalies range from −3.0 to −10.4×106 km2, with a MMM anomaly of −5.6×106 km2, which constitutes a decrease of 53 % compared to the pre-industrial period. The majority (11 out of 16) of models simulate summer sea-ice-free conditions (≤1×106 km2) in their mPWP simulation. The ensemble tends to underestimate SAT in the Arctic when compared to available reconstructions, although the degree of underestimation varies strongly between the simulations. The simulations with the highest Arctic SAT anomalies tend to match the proxy dataset in its current form better. The ensemble shows some agreement with reconstructions of sea ice, particularly with regard to seasonal sea ice. Large uncertainties limit the confidence that can be placed in the findings and the compatibility of the different proxy datasets. We show that while reducing uncertainties in the reconstructions could decrease the SAT data–model discord substantially, further improvements are likely to be found in enhanced boundary conditions or model physics. Lastly, we compare the Arctic warming in the mPWP to projections of future Arctic warming and find that the PlioMIP2 ensemble simulates greater Arctic amplification than CMIP5 future climate simulations and an increase instead of a decrease in Atlantic Meridional Overturning Circulation (AMOC) strength compared to pre-industrial period. The results highlight the importance of slow feedbacks in equilibrium climate simulations, and that caution must be taken when using simulations of the mPWP as an analogue for future climate change.

Palaeoclimate simulations↗

Long-Term Variations in Total Solar Irradiance

For more than a decade total solar irradiance has been monitored simultaneously from space by different satellites. The detection of total solar irradiance variations by satellite -based experiments during the past decade and a half has stimulated modeling efforts to help identify their causes and to provide estimates of irradiance data, using "proxy" indicators of solar activity, for the time intervals when no satellite observations exist. In this paper the variations in total solar irradiance observed by the Nimbus-7/ERB, SMM/ACRIM I, and UARS/ACRIM II radiometers are compared to the changes in sunspot darkening and the enhanced emission of bright magnetic elements, including faculae and the magnetic network. Quantitative indices of sunspot darkening have been derived from the area and position of sunspots published in the NOAA-WDC Solar Geophysical Data catalog. The Mg core-to-wing ratio, derived from the irradiance observations of Nimbus-7 and NOAA9 satellites, is used as a proxy for the bright magnetic elements. It has been found that a model, calculated from the Mg II core-to-wing ratio underestimates the observed total irradiance at the time of maximum and during the beginning of the declining portion of solar cycle 22 similar in behaviour just before the maximum of solar cycle 21. Similar results are found using He-line equivalent width and 10.7 cm radio flux which indicates that the current irradiance models are in general not capable to reproducing the changes observed in total solar irradiance.

total↗

Large-scale features of Last Interglacial climate: results from evaluating the lig127k simulations for the Coupled Model Intercomparison Project (CMIP6)–Paleoclimate Modeling Intercomparison Project (PMIP4)

The modeling of paleoclimate, using physically based tools, is increasingly seen as a strong out-of-sample test of the models that are used for the projection of future climate changes. New to the Coupled Model Intercomparison Project (CMIP6) is the Tier 1 Last Interglacial experiment for 127 000 years ago (lig127k), designed to address the climate responses to stronger orbital forcing than the midHolocene experiment, using the same state-of-the-art models as for the future and following a common experimental protocol. Here we present a first analysis of a multi-model ensemble of 17 climate models, all of which have completed the CMIP6 DECK (Diagnostic, Evaluation and Characterization of Klima) experiments. The equilibrium climate sensitivity (ECS) of these models varies from 1.8 to 5.6°C. The seasonal character of the insolation anomalies results in strong summer warming over the Northern Hemisphere continents in the lig127k ensemble as compared to the CMIP6 piControl and much-reduced minimum sea ice in the Arctic. The multi-model results indicate enhanced summer monsoonal precipitation in the Northern Hemisphere and reductions in the Southern Hemisphere. These responses are greater in the lig127k than the CMIP6 midHolocene simulations as expected from the larger insolation anomalies at 127 than 6 ka. New synthesis for surface temperature and precipitation, targeted for 127 ka, have been developed for comparison to the multi-model ensemble. The lig127k model ensemble and data reconstructions are in good agreement for summer temperature anomalies over Canada, Scandinavia, and the North Atlantic and for precipitation over the Northern Hemisphere continents. The model–data comparisons and mismatches point to further study of the sensitivity of the simulations to uncertainties in the boundary conditions and of the uncertainties and sparse coverage in current proxy reconstructions. The CMIP6–Paleoclimate Modeling Intercomparison Project (PMIP4) lig127k simulations, in combination with the proxy record, improve our confidence in future projections of monsoons, surface temperature, and Arctic sea ice, thus providing a key target for model evaluation and optimization.

Last Interglacial climate↗

The AERONET Version 3 Aerosol Retrieval Algorithm, Associated Uncertainties and Comparisons to Version 2

The Aerosol Robotic Network (AERONET) Version 3 (V3) aerosol retrieval algorithm is described, which is based on the Version 2 (V2) algorithm with numerous updates. Comparisons of V3 aerosol retrievals to those of V2 are presented, along with a new approach to estimate uncertainties in many of the retrieved aerosol parameters. Changes in the V3 aerosol retrieval algorithm include (1) a new polarized radiative transfer code (RTC), which replaced the scalar RTC of V2, (2) detailed characterization of gas absorption by adding NO2 and H2O to specify total gas absorption in the atmospheric column, specification of vertical profiles of all the atmospheric species, (3) new bidirectional reflectance distribution function (BRDF) parameters for land sites adopted from the MODIS BRDF/Albedo product, (4) a new version of the extraterrestrial solar flux spectrum, and (5) a new temperature correction procedure of both direct Sun and sky radiance measurements. The potential effect of each change in V3 on single scattering albedo (SSA) retrievals was analyzed. The operational almucantar retrievals of V2 versus V3 were compared for four AERONET sites: GSFC, Mezaira, Mongu, and Kanpur. Analysis showed very good agreement in retrieved parameters of the size distributions. Comparisons of SSA retrievals for dust aerosols (Mezaira) showed a good agreement in 440 nm SSA, while for longer wavelengths V3 SSAs are systematically higher than those of V2, with the largest mean difference at 675 nm due to cumulative effects of both extraterrestrial solar flux and BRDF changes. For non-dust aerosols, the largest SSA deviation is at 675 nm due to differences in extraterrestrial solar flux spectrums used in each version. Further, the SSA 675 nm mean differences are very different for weakly (GSFC) and strongly (Mongu) absorbing aerosols, which is explained by the lower sensitivity to a bias in aerosol scattering optical depth by less absorbing aerosols. A new hybrid (HYB) sky radiance measurement scan is introduced and discussed. The HYB combines features of scans in two different planes to maximize the range of scattering angles and achieve scan symmetry, thereby allowing for cloud screening and spatial averaging, which is an advantage over the principal plane scan that lacks robust symmetry. We show that due to an extended range of scattering angles, HYB SSA retrievals for dust aerosols exhibit smaller variability with solar zenith angles (SZAs) than those of almucantar (ALM), which allows extension of HYB SSA retrievals to SZAs less than 50∘ to as small as 25∘. The comparison of SSA retrievals from closely time-matched HYB and ALM scans in the 50 to 75∘ SZA range showed good agreement with the differences below ∼0.005. We also present an approach to estimate retrieval uncertainties which utilizes the variability in retrieved parameters generated by perturbing both measurements and auxiliary input parameters as a proxy for retrieval uncertainty. The perturbations in measurements and auxiliary inputs are assumed as estimated biases in aerosol optical depth (AOD), radiometric calibration of sky radiances combined with solar spectral irradiance, and surface reflectance. For each set of Level 2 Sun/sky radiometer observations, 27 inputs corresponding to 27 combinations of biases were produced and separately inverted to generate the following statistics of the inversion results: average, standard deviation, minimum and maximum values. From these statistics, standard deviation (labeled U27) is used as a proxy for estimated uncertainty, and a lookup table (LUT) approach was implemented to reduce the computational time. The U27 climatological LUT was generated from the entire AERONET almucantar (1993–2018) and hybrid (2014–2018) scan databases by binning U27s in AOD (440 nm), Angström exponent (AE, 440–870 nm), and SSA (440, 675, 870, 1020 nm). Using this LUT approach, the uncertainty estimates U27 for each individual V3 Level 2 retrieval can be obtained by interpolation using the corresponding measured and inverted combination of AOD, AE, and SSA.

Aliaksandr Siniuk↗

Maternal provisioning gives young-of-the-year Hammerheads a head start in early life

For species that do not provide parental care after birth, excess maternal provisioning during development, beyond what is required for embryogenesis, provides offspring with resources to increase their chances of survival. Maternally derived resources are expected to be important for buffering offspring against limited food resources at birth or time needed to learn how to properly feed. Young-of-the-year (YOY) cryptic Scalloped Hammerheads (Sphyrna lewini) and Carolina Hammerheads (Sphyrna gilberti) were sampled from nurseries along the US Atlantic Coast and compared for a number of biological condition metrics across three developmental stages. Large declines in liver lipid content and hepatosomatic indices were found in neonatal sharks, using umbilical scar healing as a proxy for time since birth. Feeding commenced quickly as 96% of sharks had prey remnants in their stomachs. The combination of rapid exhaustion of maternally provided resources and high occurrence of stomachs with prey contents indicate that nursery quality, with respect to prey availability, may be important for YOY hammerhead survivorship. While externally the two species are morphologically similar, longer length-at-birth in S. lewini and higher hepatic condition in neonatal S. gilberti suggest that aspects of reproductive biology, including physiology, may differ between species. While more information is needed to distinguish life history differences between these two species, data collected from YOY may serve as a useful proxy to inform management when adult samples of cryptic species are difficult to collect.

none↗

Petrology, Geochemistry, and Pairing of Lunar Meteorites from the Dominion Range

Introduction: During the 2018-2019 Antarctic Search for Meteorites (ANSMET) field season in the Dominion Range (DOM), 7 lunar meteorite stones were collected: DOM 18242 (15.1 g), DOM 18244 (25.1 g), DOM 18262 (6.8 g), DOM 18509 (16.5 g), DOM 18543 (13.6 g), DOM 18666 (45.9 g), and DOM 18678 (11.6 g). Here we present the initial results of electron microprobe and X-ray computed tomography (XCT) studies of these stones and look at the details of their petrography and mineral chemistry, as well as investigate possible pairing relationships, both with each other and with previously described lunar meteorites. Most of the work presented here is on the DOM 18509, 18543, and 18678 stones; subsamples of the other stones are in hand and similar measurements will be made on them by the time of the meeting. Methods: Textures in DOM 18509, DOM 18543, and DOM 18678 were characterized in 2D by optical microscopy, backscattered electron (BSE) imaging and elemental X-ray images on thin sections, as well as in 3D by X-ray computed tomography (XCT) on sample chips. Mineral compositions were assessed through a combination of wavelength dispersive spectroscopy EPMA (electron probe microanalysis) and x-ray mapping on the JEOL 8530 at NASA JSC. The bulk composition of all three meteorites was determined based on analyses of the fusion crust glass. XCT analyses were done on the Nikon XTH 320 at NASA JSC. ICP-MS data on bulk rock subsamples for each meteorite will be carried out in the near future. Results: The stones are all similar in macroscopic appearance with a dark aphanitic matrix hosting a variety of small- to medium-sized angular mineral and lithic fragments (often light colored in nature) [1,2]. Based on EPMA and XCT results, the three meteorites are polymict regolith breccias comprised of mineral, glass, and lithic clasts ranging up to several mm in length. Melt veins run through all three meteorite samples. Mineral clasts in all 3 stones are dominated by pyroxene and plagioclase (An82-96), with minor amounts of SiO2, olivine (Fo1-52), and FeTi-oxides. Pyroxene grains are mostly Fe-rich pigeonite and augite, and larger clasts are normally zoned and have fine exsolution lamellae. The lithic clasts in all stones consists of: (1) basalt clasts that contain zoned pyroxene, plagioclase laths, and ilmenite, with minor silica and Fe-rich olivine; (2) granulitic clasts; (3) anorthosite clasts; (4) Si-rich clasts that also contain ilmenite, troilite, high-Ca pyroxene, fayalite, and K-feldspar likely mesostasis from late stage basalts). All three meteorites contain glassy fusion crust that is highly vesicular, high in FeO and Al2O3 (15-17 wt% each), ferroan (Mg# of 23-24), and moderately rich in TiO2 (1.4-1.8 wt%). The composition of the fusion crust can serve as a proxy for the bulk meteorite composition and is identical within error for all three meteorites. Implications: The lithic and mineral clasts in all three stones are similar in clast population and assemblages as well as mineral chemistry. In addition, the fusion crust composition, a proxy for bulk composition, is within error of each other for all three stones. Thus DOM 18509, DOM 18543, and DOM 18678 are almost certainly paired. Based on similarities in macroscopic description as well as preliminary classification data [1,2], all 7 lunar stones from DOM are likely paired, though additional quantitative analyses are needed to confirm this. The presence of spherules and vesicular fusion crusts indicates that the DOM pairing group is a regolith breccia. The presence of basaltic and gabbroic clasts as well as more feldspathic materials, suggest that the regolith from which these meteorites formed contained a mixture of feldspathic highland material and mare material, suggesting a possible provenance near a marehighlands boundary. No evidence of KREEPy lithologies have been observed so far in these meteorites, however, future ICP-MS data on bulk rock chips for the stones will reveal any KREEP component if present. The DOM pairing group has many similarities to previously described lunar breccia meteorite MET 01210, however more detailed compositional data will be needed to make a definitive comparison.

R.A. Zeigler↗

The Application of Remote Sensing and Machine Learning to Improve Early Warning Systems for Harmful Algal Events in the Highland Lake Chain, TX

Beginning in 2019, harmful algal events have caused canine deaths in both Lady Bird Lake and Lake Travis located near Austin, Texas. These two reservoirs are part of the larger Highland Lakes chain, managed by the City of Austin Department of Watershed Protection (COA DWP) and the Lower Colorado River Authority (LCRA), which fulfill municipal, commercial, and agricultural water demands. Given the recent increase in favorable environmental conditions for algal events in central Texas, NASA DEVELOP partnered with LCRA and COA DWP to improve monitoring and early detection of algal events, utilizing satellite remote sensing and machine learning. Spatially and temporally varied chlorophyll a concentrations, cyanobacteria detections, turbidity, and water surface temperature products are used as environmental proxies. Landsat 8 Operational Land Imager (OLI) and the Sentinel-2 MultiSpectral Instrument (MSI) data were used to provide a combined revisit time of up to ~3 days and < 30 m per pixel products. Chlorophyll a concentrations were estimated using a pre-trained Mixture Density Network, and cyanobacteria detection was accomplished using the Broad Wavelength Algae Index, which can differentiate algal blooms from algal proliferations (mats). In situ data were used to validate remotely sensed measurements and quantify uncertainties. Preliminary results show a good fit between the modeled output and in situ observations, suggesting that remote sensing data can be used to retrieve biogeochemical properties and/or inherent optical properties (IOPs) of water columns in these inland human-made lakes. Uncertainties were introduced from the sensitivity to atmospheric correction, inherent mismatch between satellite and sampling data, and a relatively lower signal-to-noise ratio over water. The resulting products enable near real-time monitoring of environmental proxies relevant to algal event presence in the Highland Lakes chain, and will ultimately support water management, decision making, and risk communication.

Shuyu Chang↗

Investigating Stable Oxygen and Carbon Isotopic Variability in Speleothem Records Over the Last Millennium Using Multiple Isotope-Enabled Climate Models

The incorporation of water isotopologues into the hydrology of general circulation models (GCMs) facilitates the comparison between modeled and measured proxy data in paleoclimate archives. However, the variability and drivers of measured and modeled water isotopologues, as well as the diversity of their representation in different models, are not well constrained. Improving our understanding of this variability in past and present climates will help to better constrain future climate change projections and decrease their range of uncertainty. Speleothems are a precisely datable terrestrial paleoclimate archives and provide well-preserved (semi-)continuous multivariate isotope time series in the lower latitudes and mid-latitudes and are therefore well suited to assess climate and isotope variability on decadal and longer timescales. However, the relationships of speleothem oxygen and carbon isotopes to climate variables are influenced by site-specific parameters, and their comparison to GCMs is not always straightforward. Here we compare speleothem oxygen and carbon isotopic signatures from the Speleothem Isotopes Synthesis and Analysis database version 2 (SISALv2) to the output of five different water-isotope-enabled GCMs (ECHAM5-wiso, GISS-E2-R, iCESM, iHadCM3, and isoGSM) over the last millennium (850–1850 CE). We systematically evaluate differences and commonalities between the standardized model simulation outputs. The goal is to distinguish climatic drivers of variability for modeled isotopes and compare them to those of measured isotopes. We find strong regional differences in the oxygen isotope signatures between models that can partly be attributed to differences in modeled surface temperature. At low latitudes, precipitation amount is the dominant driver for stable water isotope variability; however, at cave locations the agreement between modeled temperature variability is higher than for precipitation variability. While modeled isotopic signatures at cave locations exhibited extreme events coinciding with changes in volcanic and solar forcing, such fingerprints are not apparent in the speleothem isotopes. This may be attributed to the lower temporal resolution of speleothem records compared to the events that are to be detected. Using spectral analysis, we can show that all models underestimate decadal and longer variability compared to speleothems (albeit to varying extents). We found that no model excels in all analyzed comparisons, although some perform better than the others in either mean or variability. Therefore, we advise a multi-model approach whenever comparing proxy data to modeled data. Considering karst and cave internal processes, e.g., through isotope-enabled karst models, may alter the variability in speleothem isotopes and play an important role in determining the most appropriate model. By exploring new ways of analyzing the relationship between the oxygen and carbon isotopes, their variability, and co-variability across timescales, we provide methods that may serve as a baseline for future studies with different models using, e.g., different isotopes, different climate archives, or different time periods.

isotope-enabled simulations↗

Interpretation of Spectral LiDAR Backscattering off the Florida Coast

A multispectral backscattering LiDAR (Light detection and range) system (hereafter Oculus) was integrated into a wave glider and used to estimate the scattering order (i.e., single vs multiple collisions), inherent optical properties (IOPs) and characteristics of particulate scatterers (i.e., relative size, composition and motion) on shelf waters of South East Florida. Oculus has a dual-wavelength configuration (473 and 532 nm) and two detection geometries (off- and on-axis). Characteristics of scatterers were investigated based on two complementary LiDAR-derived proxies (the Structural Dissimilarity Index and the spectral slope of LiDAR backscattering). In March 2017, field measurements showed a covariation between direct and diffuse backscattering contributions during morning hours and away from shore. LiDAR attenuation coefficients explained up to 57% of IOPs variability. The analysis of LiDAR-derived proxies suggested higher turbidity and larger particulates near the coast.

LiDAR↗

Tonlé Sap Food Security & Agriculture III: Evaluating Changes in Ecosystem Vitality and Freshwater Health in the Tonlé Sap Basin using Remotely Sensed Data

Tonlé Sap Lake, located in Cambodia, Southeast Asia, is one of the most productive inland fisheries in the world. With the unique reverse flow hydrology of the Tonlé Sap River, this freshwater system contains rich biodiversity and provides critical freshwater resources for the local community. Overfishing, stronger seasonality, drought, dam construction, forest fires, and untreated industrial domestic sewage threaten the ecosystem vitality and economic success of Tonlé Sap. In collaboration with Conservation International and the Cambodian Ministry of Water Resources and Meteorology’s Tonlé Sap Authority, we calibrated and finalized remotely-sensed proxies for sub-indicators of the Freshwater Health Index (FHI). We used NASA Earth observation data from Moderate Resolution Imaging Spectroradiometer (MODIS), and the Gravity Recovery and Climate Experiment (GRACE). These datasets were used in RS proxies and a Soil and Water Assessment Tool (SWAT) model that previous teams developed for sub-indicators of FHI. They included landcover, bank modification, and water quality metrics. It was determined that the ground water storage in Tonlé Sap Lake exhibited a slight declining trend over from April 1st, 2002 to February 3rd, 2017. To calculate chlorophyll-a concentration in the Tonlé Sap Lake, we used Copernicus Global Land Service mission data which provided a Trophic State Index of the lake. Between January 1st, 2000 and December 31st, 2020, the lake and surrounding region within the study area boundary displayed a slight decrease in vegetation density and consistently high chlorophyll-a concentrations. The SWAT model calculated nitrogen and phosphorus content measured in outlet points of the lake. We demonstrated that remotely sensed data is valuable for providing additional information for the FHI, but is not fully capable of replacing its in situ counterpart. We also concluded the water quantity is on a slowly declining trend within the basin.

Joey Lindsay↗

Optimal Locations for Air Mobility Vertiports

The purpose of this study was to effectively solicit the public to obtain inputs on potential Advanced Air Mobility (AAM) vertiport locations for UAM and RAM operations that transport people, specifically: where they would like to see vertiports located, and how they would like to use this new mode of transport (e.g. for “local” trips across town, for more “regional” trips between cities/towns, for business-related purposes, for leisure/personal purposes, routinely or only for “special” occasions, etc.) Maven conducted an electronic survey of individuals residing in specific geographies in order to obtain a broadly representative sample of the citizenry across all demographics and population density designations (e.g. rural, exurban, suburban, and urban). For the purposes of this survey, Maven received input from over 1,500 individuals divided between the Los Angeles Metropolitan area (as a general proxy for urban residents), and the state of Ohio (as a general proxy for suburban, exurban, and rural residents).

Advanced air mobility↗

Mineral Inputs, Paleoecological Change, and Holocene Carbon Accumulation at a Boreal Peatland in the Hudson Bay Lowlands, Canada

The Hudson Bay Lowlands (HBL) is a vast contiguous peatland extending over >370,000 km2 in Canada's boreal-subarctic, and is the traditional land of the Omushkego Cree. It is currently undergoing climatic warming alongside other anthropogenic stressors, and contains a large below-ground carbon pool. Understanding how climate variability and multiple stressors impact peat accumulation in this region is critical to discerning how northern peatlands will respond to future climate and land-use changes. Pollen- and macrofossil-based paleoecological reconstructions, and analyses of aluminum (Al) and titanium (Ti) fluxes in a Holocene-aged peat core (VM375) taken from a bog in the Attawapiskat watershed were conducted to link ecosystem changes with hydroclimate and long-term carbon storage. Peat initiation is dated to 5780 cal yr B.P., coincident with land emergence driven by glacial isostatic adjustment. From 4500 to 4200 cal yr B.P., apparent rate of carbon accumulation increased, and was linked to more rapid rates of peat accretion and increases in minerotrophic indicators in the pollen record. This increase in peat accretion and shift in vegetation composition co-occur with higher rates of mineral influx as shown by Ti and Al concentrations, which may have supplied nutrients. A fen to bog transition takes place ~3300 cal yr B.P., with increases in Sphagnum spores and macrofossils, and a decline in the apparent rate of carbon accumulation relative to the earlier half of the record, where paleoecological proxies indicate treed wetland and fen stages. Since peat inception, the total carbon stock of the 260-cm peat column is 110 kg C m−2. This multi-proxy record shows an association between changing peat types and variability in apparent rates of carbon accumulation, and supports the hypothesis that mineral nutrients either supplied by surface hydrology or by eolian deposition played a role in Holocene peat carbon accumulation in eastern North American boreal peatlands.

Dust↗

Examining the Trends in Financial Support Given to Science Teams for Data Analysis in Mission Proposals

Introduction: The goal of this summer internship research project was to analyze trends in financial support proposed for the science teams of planetary missions. The analysis focuses on the funding for Co-Investigators (Co-Is) to conduct research and/or data analysis needed to achieve the science objectives of the mission. The operational portion of the missions after launch (i.e., Phase E, including cruise and prime operations at the final destination) were examined since that is when the bulk of research is funded and conducted. The objectives of the project were to determine the average level of support for Co-Investigators, identify variation between mission competitions and over time, and determine the relationship between mission type and the amount of support requested. Methodology: This project was conducted using data from 90 proposals submitted to six mission competitions in the Discovery and New Frontiers programs. The level of support for Co-Is was determined by examining Work Breakdown Structure (WBS) 4 (Science Analysis) for Phase E, which was further subdivided into cruise and prime operations. This data represents a proxy rather than the actual funding Co-Is receive to perform research and data analysis because not every dollar in WBS 4 is spent on this activity. Therefore, the proxy obtained in this research represents an overestimate of the funds allocated to Co-Is for research and data analysis. Findings: Analysis shows that on average a Co-I receives approximately four full years of support spread across the entirety of Phase E for science analysis. The variation among proposed missions is less than expected given the variety of factors that are expected to drive this metric (length of mission, mission type, etc.). Additionally, the level of requested support for Co-Is has been remarkably consistent across every variable considered (by competition, over time, by mission type) over the six competitions and nearly 20 years spanned by this project. This remains true for cruise, primary operations, and all of Phase E. Conclusions: A remarkable amount of science is accomplished by the science teams of planetary missions. However, a surprisingly small amount of funding is requested to support the science analysis driving this productivity, both in terms of absolute magnitude of funding and as a portion of total mission cost. This suggests improvements are needed to refine the estimates of Co-I support and/or that Co-Is rely on other funding sources to conduct their research. Better estimates can be determined by engaging directly with Co-Is and NASA centers to obtain data as well as finding other data sources. Additionally, NASA could consider mandating improved reporting of requested funding levels in mission competitions.

E Murray↗

Industrial-Era Decline in Subarctic Atlantic Productivity

Marine phytoplankton play a critical role in modulating marine-based food webs, fishery yields, and the global drawdown of atmospheric CO2. Due to sparse measurements prior to 21st century satellite monitoring, however, little is known of the long-term response of planktonic stocks to climate forcing. Here we produce the first continuous, multi-century record of subarctic Atlantic marine productivity, showing a marked 10 ± 7% decline has occurred across this highly-productive ocean basin over the last two centuries. We support this conclusion through the application of a novel marine-productivity proxy, established using a unique signal of planktonic-derived aerosol commonly identified across an array of Greenlandic ice cores. Utilizing contemporaneous satellite-era observations, we demonstrate this signal’s use as a robust and high-resolution proxy for spatially-integrated marine productivity variations. We show that the initiation of declining subarctic Atlantic productivity broadly coincides with the onset of Arctic surface warming, and that productivity strongly covaries with regional sea-surface temperatures and basin-wide gyre circulation strength over recent decades. Taken together, our results suggest the industrial era productivity decline may be evidence of the predicted5 collapse of northern Atlantic planktonic stocks in response to a weakened Atlantic Meridional Overturning Circulation (AMOC). Continued AMOC weakening, as projected for the 21st century, may therefore result in further productivity declines across this globally-relevant region.

Climate change↗

Clumped-Isotope Constraint on Upper-Tropospheric Cooling During the Last Glacial Maximum

Ice cores and other paleotemperature proxies, together with general circulation models, have provided information on past surface temperatures and the atmosphere's composition in different climates. Little is known, however, about past temperatures at high altitudes, which play a crucial role in Earth's radiative energy budget. Paleoclimate records at high-altitude sites are sparse, and the few that are available show poor agreement with climate model predictions. These disagreements could be due to insufficient spatial coverage, spatiotemporal biases, or model physics; new records that can mitigate or avoid these uncertainties are needed. Here, we constrain the change in upper-tropospheric temperature at the global scale during the Last Glacial Maximum (LGM) using the clumped-isotope composition of molecular oxygen trapped in polar ice cores. Aided by global three-dimensional chemical transport modeling, we exploit the intrinsic temperature sensitivity of the clumped-isotope composition of atmospheric oxygen to infer that the upper troposphere (effective mean altitude 10–11 km) was 6–9°C cooler during the LGM than during the late preindustrial Holocene. A complementary energy balance approach supports a minor or negligible steepening of atmospheric lapse rates during the LGM, which is consistent with a range of climate model simulations. Proxy-model disagreements with other high-altitude records may stem from inaccuracies in regional hydroclimate simulation, possibly related to land-atmosphere feedbacks.

clumped isotope↗

Assimilation of GEO and LEO Satellite Retrievals in WRF-Chem (15 km and 4 km) with ‘Top-Down’ Emissions Estimation

We are constraining concentrations and emissions for all criteria pollutants (CO, O3, NO2, SO2, PM10, and PM2.5) with WRF-Chem/DART in applications for FRAPPE (15-km grid) and COLORADO (4-km grid). Our results show that: (i) dynamic emissions estimation at medium resolutions (15 km) improves forecast skill; (ii) At high resolutions, the results look good, but we do not have validation data; (iii) for what may be the first time, we assimilate O3 retrieval profiles in a regional model. The problem is that the averaging kernels generally extend above the upper boundary of regional models. We use O3 upper boundary conditions from the global model to solve that problem; and (iv) In the high resolution experiments, we document the potential benefits of assimilating TEMPO O3 profile and NO2 tropospheric column retrievals. Here, we assimilate proxy TEMPO retrievals from a GEOS-Chem nature run, so there’s a conceptual problem due to the potential bias of the proxy retrievals, but the point is to demonstrate our ability to assimilate TEMPO and identify its potential impacts.

Chemical data assimilation↗