Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantitative evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Investigation of structural behavior of candidate Space Station structure

Quantitative evaluations of the structural loads, stiffness and deflections of an example Space Station truss due to a variety of influences, including manufacturing tolerances, assembly operations, and operational loading are reported. The example truss is a dual-keel design composed of 5-meter-cube modules. The truss is 21 modules high and 9 modules wide, with a transverse beam 15 modules long. One problem of concern is the amount of mismatch which will be expected when the truss is being erected on orbit. Worst-case thermal loading results in less than 0.5 inch of mismatch. The stiffness of the interface is shown to be less than 100 pounds per inch. Thus, only moderate loads will be required to overcome the mismatch. The problem of manufacturing imperfections is analyzed by the Monte Carlo approach. Deformations and internal loads are obtained for ensembles of 100 example trusses. All analyses are performed on a personal computer. The necessary routines required to supplement commercially available programs are described.

Hedgepeth, John M.↗
NASA NTRS1988

Ozone measurements using balloon-borne ozonesondes

Vertical profiles of atmospheric ozone have been measured for a number of years by WFF personnel using small balloon borne ozonesondes. These sondes are interfaced with meteorological radiosondes so that both ozone data and meterological data (pressure, temperature, humidity, wind speed and direction) are obtained from ground level up to 30 to 35 km. Efforts at Wallops have been focused in three areas. The first involves biweekly launches from two sites (Wallops and Natal, Brazil), timed to coincide with overpasses of satellite borne ozone sensors such as the Solar Backscattered Ultraviolet. The resulting data are reported to the World Ozone Data Center and are used for satellite correlative support, as well as, for studies of both tropospheric and stratospheric ozone. The second activity consists of field campaigns in remote locations in support of special projects. The third is a continuing activity to quantitatively evaluate and improve the sonde's performance under stratospheric conditions.

Torres, A. L.↗
NASA NTRS1989

Visual enhancements in pick-and-place tasks: Human operators controlling a simulated cylindrical manipulator

A teleoperation simulator was constructed with vector display system, joysticks, and a simulated cylindrical manipulator, in order to quantitatively evaluate various display conditions. The first of two experiments conducted investigated the effects of perspective parameter variations on human operators' pick-and-place performance, using a monoscopic perspective display. The second experiment involved visual enhancements of the monoscopic perspective display, by adding a grid and reference lines, by comparison with visual enhancements of a stereoscopic display; results indicate that stereoscopy generally permits superior pick-and-place performance, but that monoscopy nevertheless allows equivalent performance when defined with appropriate perspective parameter values and adequate visual enhancements.

Kim, Won S.↗
NASA NTRS1990

Non-linear dynamic analysis of geared systems, part 2

A good understanding of the steady state dynamic behavior of a geared system is required in order to design reliable and quiet transmissions. This study focuses on a system containing a spur gear pair with backlash and periodically time-varying mesh stiffness, and rolling element bearings with clearance type non-linearities. A dynamic finite element model of the linear time-invariant (LTI) system is developed. Effects of several system parameters, such as torsional and transverse flexibilities of the shafts and prime mover/load inertias, on free and force vibration characteristics are investigated. Several reduced order LTI models are developed and validated by comparing their eigen solution with the finite element model results. Several key system parameters such as mean load and damping ratio are identified and their effects on the non-linear frequency response are evaluated quantitatively. Other fundamental issues such as the dynamic coupling between non-linear modes, dynamic interactions between component non-linearities and time-varying mesh stiffness, and the existence of subharmonic and chaotic solutions including routes to chaos have also been examined in depth.

Singh, Rajendra↗
NASA NTRS1990

Upward ion flow in ionospheric holes on Venus

The nature of ion flow within two ionospheric holes on the nightside of Venus was investigated using ion composition measurements made by the ion mass spectrometer on the Pioneer Venus Orbiter. A comparison of the altitude profiles of the observed ion densities with those expected under diffusive equilibrium conditions indicates that the major ions O(+), NO(+), and O2(+), as well as the minor ions H(+) and He(+) flow upward and away from Venus along the axes of the holes. This result agrees with a quantitative evaluation of the ion flow speeds appearing in expressions derived from the equations for conservation of mass and momentum of the ions and electrons. The analysis shows that all ion species flow upward in the holes because the upward force produced by the plasma pressure gradient exceeds all downward forces. However, the nature of the ion source required to maintain such flow is not known.

Hartle, R. E.↗
NASA NTRS1989

Performance of advanced missions using fusion propulsion

A quantitive evaluation of the premise that nuclear fusion propulsion offers benefits as compared to other propulsion technologies for carrying out a program of advanced exploration of the solar system and beyond is presented. Using a simplified analytical model of trajectory performance, numerical results of mass requirements versus trip time are given for robotic missions beyond the solar system that include flyby and rendezvous with the Oort cloud of comets and with the star system Alpha Centauri. Round trip missions within the solar system, including robotic sample returns from the outer planet moons and multiple asteroid targets, and manned Mars exploration are also described.

Friedlander, Alan↗
NASA NTRS1990

Gated photomultiplier response characterization for DIAL measurements

The characteristics of various detector responses are studied to understand the cause of various systematic biases and to minimize these undesirable effects in measurements of transient signals with large dynamic range. Signal-induced bias, gain variation, and the linearity of commonly used gated photomultipliers in the current integrating mode are quantitatively evaluated. Analysis of the results indicates that impurity ions inside the photomultiplier tubes (PMT) are the source of the signal induced bias and gain variation. Two different PMTs used in this study show significant differences in the magnitude and decay behavior of signal-induced bias. It was found that it can be minimized by using an external amplifier to reduce PMT gain, and by applying a low potential between the cathode and first dynode. The linearity of a PMT is also studied over a large dynamic range of input intensities employing a new technique which does not require an absolute calibration. The result of this study shows that the photomultiplier response is linear only for a limited input intensity range below a certain anode current.

Lee, H. Sang↗
NASA NTRS1990

The shallow structure of the Martian lithosphere in the vicinity of the ridged plains

On Mars, the most prominent assemblage of regularly spaced plain ridges occurs in the plains of the Coprates and Lunae Planum regions. In this paper, a number of tectonic models is developed and quantitatively evaluated, that relate the regular spacing of these ridges to the shallow internal structure of Mars. It is shown that models with both rigid and deformable megaregolith-basement interface conditions can provide solutions which can explain the ridge spacing within the constraint provided by the estimated thickness of the smooth plains materials. Implications of the models for the structure and state of stress in the Tharsis region at the time of ridge formation are discussed.

Zuber, M. T.↗
NASA NTRS1991

A superior edge preserving filter with a systematic analysis

A new, adaptive, edge preserving filter for use in image processing is presented. It had superior performance when compared to other filters. Termed the contiguous K-average, it aggregates pixels by examining all pixels contiguous to an existing cluster and adding the pixel closest to the mean of the existing cluster. The process is iterated until K pixels were accumulated. Rather than simply compare the visual results of processing with this operator to other filters, some approaches were developed which allow quantitative evaluation of how well and filter performs. Particular attention is given to the standard deviation of noise within a feature and the stability of imagery under iterative processing. Demonstrations illustrate the performance of several filters to discriminate against noise and retain edges, the effect of filtering as a preprocessing step, and the utility of the contiguous K-average filter when used with remote sensing data.

Holladay, Kenneth W.↗
NASA NTRS1990

Composite structure global fracture toughness via computational simulation

A computational method for the simulation of damage and fracture propagation in laminated composites is presented. A quantitative evaluation of the global fracture toughness of composites is shown as a tool for monitoring the fracture stability of composites under sustained loading. Changes in overall structural properties such as natural frequencies and the fundamental buckling load are also computed with increasing load-induced damage. Structural degradation, delamination, fracture, and damage propagation are included in the simulation. An angle-plied composite plate structure subjected to inplane tensile loading is used as an example to demonstrate some of the feature of the computational method.

Minnetyan, L.↗
NASA NTRS1991

Preliminary assessment of Termoskan observations of Mars

The limited set of high-resolution observations of the 8-12 micron thermal emission from Mars' equatorial regions by the Termoskan instrument onboard the Phobos '88 spacecraft in February and March of 1989 is considered. Observations were also simultaneously acquired in the 0.5 to 1.0 micron region. A combined U.S. and Soviet scientific team made a preliminary quantitative evaluation of about 25 percent of the entire data set. It is found that there is a close agreement with the Viking Infrared Thermal Mapper brightness temperatures, confirming the accuracy of the Termoskan system and calibration. A novel pattern of emission from particles was observed in the morning and assumed to be water or ice. Thermal emission from surface features is varied and distinct down to the limit of resolution. The presence of unusually insulating material has been detected in the uppermost fraction of a millimeter of the Martian surface in places where the shadow of Phobos briefly eclipsed by the surface.

Murray, B.↗
NASA NTRS1990

Analysis of troposphere-stratosphere exchange

The overall goal is to improve our understanding of stratosphere-troposphere exchange processes in the tropics and midlatitudes. Specifically, modeling and analysis are performed using aircraft, radiosonde, and satellite data from the 1980 and 1987 NASA tropical field experiments in Panama and Australia, respectively, and the 1986 NASA jet stream field experiment in California. The objectives are to: (1) examine the structure of ozone, temperature, horizontal winds, tropospheric tracers, water and ice particles, and water vapor within, around, and above cumulus anvils in the tropics and jet streams in midlatitudes; (2) establish the presence, during each of the experimental periods, of various potential mechanisms of exchange, such as direct injection by cumulus, gravity wave fluxes, turbulent fluxes, and radiative heating; and (3) evaluate quantitatively, if possible, the mass of air transferred by these mechanisms during specific transport events.

Pfister, Leonhard↗
NASA NTRS1990

Effects of fade distribution on a mobile satellite downlink and uplink performance in a frequency reuse cellular configuration

In a mobile satellite system with a frequency reuse cellular configuration, significant co-channel interference can be experienced due to the antenna sidelobe level. The signal will be subjected not only to its own fading, but also to the effect of the varying degree of fading on co-channel interferer, and this interference will behave differently in the up and in the down link. This paper presents a quantitative evaluation of the combined effects of fades and co-channel interference on a mobile satellite link.

Boutin, Karl↗
NASA NTRS1991

Analyses of near- and far-field two-lobe patterns outside the output endface of a two-mode fiber

The behaviors of the near- and far-field two-lobe radiation patterns from a circular-core two-mode fiber are studied by using both the mode and Kirchhoff diffraction theories. The electric field outside the output endface of the fiber is derived from the electric field distribution of the LP sub 01 and LP sub 11 modes at the fiber endface using the Kirchhoff diffraction formula. Different phenomena are studied by solving this expression numerically at near-and far-fields. The Gouy phase shifts are quantitatively evaluated at cross-sections of the near field. The results reveal the distortion and dislocation of the far-field two-lobe pattern induced by an inclination angle of the fiber endface.

Wang, A.↗
NASA NTRS1992

A study of atmospheric optical scattering parameters at 1.5 and 2 micron region for solid state Doppler lidar applications

The increasing interest in the development of an eye-safe, solid state, Doppler lidar for avionic applications has created the need for a quantitative evaluation of atmospheric effects on performance. Theoretical calculations were completed for optical scattering parameters to be compared with the field measurements. Computer codes were developed for the required calculations and designed to be interactive and user friendly in order to support comparison with experimental results and, thus, provide the basis for evaluation of eye-safe Doppler lidar over a wide range of atmospheric conditions and geographical locations. A holmium Doppler lidar operating at 2.09 microns was constructed for atmospheric backscattering, attenuation, and wind velocity measurements. Theoretical calculations and field studies were performed for backscatter coefficients. The selected wavelengths correspond to Er:glass, Tm:YAG, and Tm,Ho:YAG solid state lasers that are suitable for use in an eye-safe Doppler lidar system.

Margalit, Eli↗
NASA NTRS1990

Water balance model for Kings Creek

Particular attention is given to the spatial variability that affects the representation of water balance at the catchment scale in the context of macroscale water-balance modeling. Remotely sensed data are employed for parameterization, and the resulting model is developed so that subgrid spatial variability is preserved and therefore influences the grid-scale fluxes of the model. The model permits the quantitative evaluation of the surface-atmospheric interactions related to the large-scale hydrologic water balance.

Wood, Eric F.↗
NASA NTRS1991

Regenerative Life Support Systems (RLSS) test bed performance - Characterization of plant performance in a controlled atmosphere

By growing higher plants for food, lunar and Martian manned habitats will not only reduce resupply requirements but obtain CO2 removal and both oxygen-production and water-reclamation requirements. Plants have been grown in the RLSS at NASA-Johnson in order to quantitatively evaluate plant CO2 accumulation, O2 generation, evapotranspiration, trace-contaminant generation, and biomass productivity. Attention is presently given to test conditions and anomalies in these RLSS trials; areas where performance must be improved have been identified.

Edeen, Marybeth↗
NASA NTRS1992

A test suite for magnetohydrodynamical simulations

A collection is presented of MHD problems that will provide researchers who have interests in modeling MHD phenomena with a battery of tests (a 'test suite') for calibrating their numerical algorithms. Use of these tests will provide a common reference for comparison of different numerical MHD algorithms. The test suite includes both 1D and 2D problems. Taken together, these problems test the abilities of a numerical method to propagate accurately all of the MHD wave families in moving and stationary media, to capture MHD shocks and contact discontinuities, and to model accurately Lorentz force terms in multiple dimensions. An example solution of each test problem is presented. Diagnostic convergence-testing procedures that provide a quantitative evaluation of MHD algorithms are demonstrated.

Stone, James M.↗