Search NASA⌕ Search

SEARCH · Search NASA

Results for “redox cycling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Mechanistic Studies of Continuous Partial Methane Oxidation on Cu−Zeolites Using Kinetic and Spectroscopic Methods

Abstract Over the past few decades, a significant amount of research effort has focused on investigating the active site requirements and reaction mechanisms for partial methane oxidation (PMO) to methanol over copper–exchanged zeolites during stoichiometric and stepwise chemical looping routes. More recently, research efforts have expanded to include investigating the PMO reaction in a continuous catalytic regime, primarily focusing on determining the influence of catalyst composition on Cu speciation and structure and, in turn, on PMO rate and selectivity. The structures of candidate Cu active sites are commonly studied using a combination of ex situ and in situ spectroscopic approaches. In this perspective, we critically examine the prior literature on catalytic PMO over Cu–zeolites to identify key knowledge gaps that remain in our understanding as motivation for future research efforts. We identify opportunities for future research to address these gaps by adapting analogous interrogation techniques that have been successfully used to elucidate the active site requirements and mechanistic details of another catalytic redox reaction cycle on Cu–zeolites, the selective catalytic reduction (SCR) of nitrogen oxides (NO x ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Glycerol Binding at the Narrow Channel of Photosystem II Stabilizes the Low-Spin S 2 State of the Oxygen-Evolving Complex

The oxygen-evolving complex (OEC) of photosystem II (PSII) cycles through redox intermediate states S i (i = 0–4) during the photochemical oxidation of water. The S 2 state involves an equilibrium of two isomers including the low-spin S 2 (LS-S 2 ) state with its characteristic electron paramagnetic resonance (EPR) multiline signal centered at g = 2.0, and a high-spin S 2 (HS-S 2 ) state with its g = 4.1 EPR signal. The relative intensities of the two EPR signals change under experimental conditions that shift the HS-S 2 /LS-S 2 state equilibrium. Here, we analyze the effect of glycerol on the relative stability of the LS-S 2 and HS-S 2 states when bound at the narrow channel of PSII, as reported in an X-ray crystal structure of cyanobacterial PSII. Our quantum mechanics/molecular mechanics (QM/MM) hybrid models of cyanobacterial PSII show that the glycerol molecule perturbs the hydrogen-bond network in the narrow channel, increasing the pK a of D1-Asp61 and stabilizing the LS-S 2 state relative to the HS-S 2 state. Here, the reported results are consistent with the absence of the HS-S 2 state EPR signal in native cyanobacterial PSII EPR spectra and suggest that the narrow water channel hydrogen-bond network regulates the relative stability of OEC catalytic intermediates during water oxidation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Understanding the Mechanism of High Capacitance in Nickel Hexaaminobenzene-Based Conductive Metal-Organic Frameworks in Aqueous Electrolytes

Recently, intrinsically conductive metal-organic frameworks (MOFs) have demonstrated promising performance in fast-charging energy storage applications and may outperform some current electrode materials (e.g., porous carbons) for supercapacitors in terms of both gravimetric and volumetric capacitance. In this report, we examine the mechanism of high capacitance in a nickel hexaaminobenzene-based MOF (NiHAB). Using a combination of in situ Raman and X-Ray absorption spectroscopies, as well as detailed electrochemical studies in a series of aqueous electrolytes, we demonstrate in this work that the charge storage mechanism is in fact a pH-dependent surface pseudocapacitance, and, unlike typical inorganic systems, where transition metals change oxidation state during charge/discharge cycles, NiHAB redox activity is ligand-centered.

25 ENERGY STORAGE↗
DOE OSTI2022

Accelerated Discovery of Solar Thermochemical Hydrogen Production Materials via High-Throughput Computational and Experimental Methods

In this project, combinatorial synthesis and testing methods were combined with high-throughput materials theory calculations to greatly accelerate the discovery of thermodynamically suitable candidates for green hydrogen production via a two-stage solar thermochemical water splitting (STCH) process. Over the course of the project, more than 8000 quinary and higher oxide compositions were computationally screened for STCH viability, and detailed stability calculations were performed for more than 30 of the most promising identified compositional archetypes. As a result, three new STCH capable compositional families were discovered and experimentally verified. The first, Ce x Sr 2-x MnO 4 (CSM), represents the first known Ruddlesden-Popper compound to show STCH activity, and thus demonstrates that perovskite-related structures may hold promise for this application. The second family, Sr 1-x Ce x MnO 3 (SCM), is the simple perovskite sister-analog to CSM. Sr 0.7 Ce 0.3 MnO 3 (SCM30), a member of this compositional family, was found to produce the highest hydrogen yields of any compound tested in this project, exceeding the end of project milestone target of > 150 μmol H 2 /gram oxide at a reduction temperature of 1350 °C, although only at steam-to-hydrogen ratios greater than 1000:1. Finally, we proved that a third novel Sr-and Mn-containing family, Sr 1-x Ca x Ti 1-y Mn y O 3 (SCTM), which was identified by Materials Project tools, also splits water. The behavior of the SCTM system was found to be similar to the previously discovered Sr 1-x La x Al 1-y Mn y O 3 (SLMA) family, albeit with lower H 2 yields. Across the three thrusts of the project (computational, combinatorial, and bulk testing), five journal articles were published. As part of Program End Analysis and Data Dissemination, relevant data used for the publications was uploaded to the HydroGEN Data Hub for public access, and in certain cases, results were added to public materials databases.

08 HYDROGEN↗
NASA NTRS1985

Possible roles of manganese redox chemistry in the sulfur cycle

Sulfate reducing bacteria (SRB) are very potent MnO2 reducers by virtue of their sulfide production: H2S reacts rapidly with MnO2 to yield Mn(2), elemental sulfur, and water. In manganese rich zones, Mn cycles rapidly if sulfate is present to drive the reduction and the MnO2 precipitates and sinks into anaerobic zones. The production of sulfide (by organisms requiring organic carbon compounds) to reduce manganese oxides might act to couple the carbon and sulfur cycles in water bodies in which the two cycles are physically separated. Iron has been proposed for this provision of reducing power by (Jorgensen, 1983), but since MnS is soluble and FeS is very insoluble in water, it is equally likely that manganese rather than iron provides the electrons to the more oxidized surface layers.

Nealson, K. H.↗
DOE OSTI2021

Tailoring the Redox Reactions for High-Capacity Cycling of Cation-Disordered Rocksalt Cathodes

Cation-disordered rocksalts (DRXs) have emerged as a new class of high-capacity Li-ion cathode materials. One unique advantage of the DRX chemistry is the structural flexibility that substantially lessens the elemental constraints in the crystal lattice, such as Li content, choice of transition metal redox center paired with appropriate d 0 metal, and incorporation of F anion, which allows optimization of the key redox reactions. Herein, a series of the DRX oxyfluorides based on the Mn redox have been designed and synthesized. By tailoring the stoichiometry of the DRX compositions, high-capacity cycling by promoting the cationic Mn 2+ /Mn 4+ redox reactions while suppressing those from anionic O is successfully demonstrated. A highly fluorinated DRX compound, Li 1.2 Mn 0.625 Nb 0.175 O 1.325 F 0.675 (M 0.625 F 0.675 ), delivers a capacity of ≈170 mAh g -1 at C/3 for 100 cycles. Furthermore, this work showcases the concept of balancing the cationic and anionic redox reactions in the DRX cathodes for improved electrochemical performance through the rational composition design.

25 ENERGY STORAGE↗
DOE OSTI2023

Impact of Pendent Ammonium Groups on Solubility and Cycling Charge Carrier Performance in Nonaqueous Redox Flow Batteries

The synthesis, characterization, electrochemical performance, and theoretical modeling of two base-metal charge carrier complexes incorporating a pendent quaternary ammonium group, [Ni(bppn-Me3)][BF4], 3′, and [Fe(PyTRENMe)][OTf]3, 4’, are described. Both complexes were produced in high yield and fully characterized using NMR, IR, and UV–vis spectroscopies as well as elemental analysis and single-crystal X-ray crystallography. The solubility of 3′ in acetonitrile showed a 283% improvement over its neutral precursor, whereas the solubility of complex 4’ was effectively unchanged. Cyclic voltammetry indicates an ∼0.1 V positive shift for all waves, with some changes in reversibility depending on the wave. Bulk electrochemical cycling demonstrates that both 3′ and 4’ can utilize the second more negative wave to a degree, whereas 4’ ceases to have a reversible positive wave. Flow cell testing of 3′ and 4’ with Fc as the posolyte reveals little improvement to the cycling performance of 3′ compared with its parent complex, whereas 4’ exhibits reductions in capacity decay when cycling either negative wave. Postcycling CVs indicate that crossover is the likely source of capacity loss in complexes 3, 3′, and 4’ because there is little change in the CV trace. Density functional theory calculations indicate that the ammonium group lowers the HOMO energy in 3′ and 4’, which may impart stability to cycling negative waves while making positive waves less accessible. The incorporation of a positively charged species can improve solubility, stored electron density, and capacity decay depending on the complex, features critical to high energy density redox flow battery performance.

25 ENERGY STORAGE↗
DOE OSTI2023

Concentration‐dependent Cycling of Phenothiazine‐based Electrolytes in Nonaqueous Redox Flow Cells

Increasing redox-active species concentrations can improve viability for organic redox flow batteries by enabling higher energy densities, but the required concentrated solutions can become viscous and less conductive, leading to inefficient electrochemical cycling and low material utilization at higher current densities. To better understand these tradeoffs in a model system, we study a highly soluble and stable redox-active couple, N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT), and its bis(trifluoromethanesulfonyl)imide radical cation salt (MEEPT-TFSI). We measure the physicochemical properties of electrolytes containing 0.2–1 M active species and connect these to symmetric cell cycling behavior, achieving robust cycling performance. Specifically, for a 1 M electrolyte concentration, we demonstrate 94% materials utilization, 89% capacity retention, and 99.8% average coulombic efficiency over 435 h (100 full cycles). This demonstration helps to establish potential for high-performing, concentrated nonaqueous electrolytes and highlights possible failure modes in such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thiol post-translational modifications modulate allosteric regulation of the OpcA–G6PDH complex through conformational gate control

In cyanobacteria, the redox-sensitive protein OpcA acts as a metabolic switch for G6PDH, enabling rapid adjustment of reducing power generation from glycogen catabolism and thereby precisely regulating carbon flux between anabolic and catabolic pathways. Although redox-sensitive cysteines in OpcA are known to regulate G6PDH, the mechanisms by which redox post-translational modifications (PTMs) on OpcA control G6PDH structure and activity remain unclear. Here, we combine computational modeling with experimental redox proteomics in Synechococcus elongatus PCC 7942 to dissect this mechanism. Experimentally, redox proteome analysis revealed differential redox PTM patterns, particularly on cysteines within the G6PDH-binding site of OpcA. These environmentally sensitive PTM changes at the interface suggest that thiol modifications in this region form a key regulatory node. More broadly, redox proteomics identified site-specific cysteine modifications under light/dark transitions and circadian cycling, linking distinct redox regimes to discrete PTM states. We employed PTM-Psi simulations to show that thiol PTMs near the OpcA–G6PDH interface are critical for allosteric regulation of G6PDH. The thiol PTMs on OpcA affect a putative gate region in G6PDH for substrate ingress and product egress as well as key hydrogen-bond networks within the active site. We infer that PTMs on OpcA tune the conformational landscapes of individual G6PDH subunits toward functionally relevant configurations according to environmental gradients, biasing the enzyme toward catalytically favorable states. Together, our results reveal a molecular mechanism in which thiol PTMs on OpcA modulate G6PDH structure and function through PTM-induced reorganization of conformational dynamics and allosteric communication. These findings demonstrate that PTM-level regulation provides a critical control layer from genotypes to phenotypes that enables cyanobacteria to rapidly adapt to environmental fluctuations through precise metabolic fine-tuning.

Allosteric regulation↗
DOE OSTI2022

On the various Cu-redox pathways and O 2 -mediated Bronsted-to-Lewis adsorbed-NH 3 redistribution under SCR half-cycle conditions

The Standard SCR reaction on Cu-SSZ-13 is a complex redox process facilitated by a reduction half cycle (RHC) and an oxidation half cycle (OHC). It is generally accepted that RHC requires the simultaneous presence of NO and NH 3 , while OHC requires both NO and O 2 ; however understanding of how these individual reactants impact the Cu redox cycle is limited. In this work, we provide experimental investigation of NO-only, NH 3 -only and NO+NH 3 RHC, and their relative rates. Simple kinetic models were developed to understand the dependance of NO-only and NH 3 -only RHC on Cu speciation. Various OHC routes including NO+O 2 and O 2 -only OHC, and a previously unreported H 2 O-mediated OHC pathway were also investigated. Detailed NH 3 temperature-programmed desorption studies showed that RHC selectively consumes NH 3 adsorbed on Lewis-acid sites, and that part of the remaining Bronsted-bound NH 3 moves to the Lewis-acid sites during subsequent OHC, thereby resulting in a repartitioning of adsorbed NH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Materials Design Directions for Solar Thermochemical Water Splitting

The sustainable, economical production of molecular hydrogen is a crucial component of a net zero-greenhouse-gas-emissions future. Solar thermochemical water splitting (STWS) offers a renewable route to hydrogen with the potential to help decarbonize several industries, including transportation, manufacturing, mining, metals processing, and electricity generation, as well as provide sustainable hydrogen as a chemical feedstock. STWS uses high temperatures generated from concentrated sunlight or other sustainable means for high-temperature heat to produce hydrogen and oxygen from steam. For example, in its simplest form of a two-step thermochemical cycle, a redox-active metal oxide is heated to ≈1700-2000 K, driving off molecular oxygen while producing oxygen vacancies in the material. The reduced metal oxide then cools (ideally with the extracted heat recuperated for re-use) and, in a separate step, comes into contact with steam, which reacts with oxygen vacancies to produce molecular hydrogen while recovering the original state of the metal oxide. Despite its promising use of the entire solar spectrum to split water thermochemically, the current estimated cost of hydrogen produced via STWS is ≈4-6× the U.S. Department of Energy (DOE) Hydrogen Shot target value of $1/kg. One contributing approach to bridging this cost gap is the design of new materials with improved thermodynamic properties to enable higher efficiencies. The state-of-the-art (SOA) redox-active metal oxide for STWS is ceria (CeO 2 ), due to its close to optimal, although too high, oxygen vacancy formation enthalpy and large configurational and electronic entropy of reduction. However, ceria requires high operating temperatures and its efficiency is insufficient. Therefore, efforts to increase the efficiency of STWS cycles have focused on further optimizing oxygen vacancy formation enthalpies and augmenting the reduction entropy via substitution or doping and materials discovery schemes. Examples of the latter include the perovskites BaCe 0.25 Mn 0.75 O 3 and (Ca,Ce)(Ti,Mn)O 3 . These efforts and others have revealed intuitive chemical principles for the efficient and systematic design of more effective materials, such as the strong correlation between the enthalpies of crystal bond dissociation and solid-state cation reduction with the enthalpy of oxygen vacancy formation, as well as configurational entropy augmentation via the coexistence of two or more redox-active cation sublattices. The purpose of this chapter is to prepare the reader with an up-to-date account of STWS redox-active materials, both the SOA and promising newcomers, as well as to provide chemically intuitive strategies for improving their cycle efficiencies through materials design – in conjunction with ongoing efforts in reactor engineering and gas separations – to reach the cost points for commercial viability. First, we will introduce the thermodynamics of STWS using a two-step, metal-oxide, thermochemical cycle with economics in mind. We also will compare the pros and cons of processes that do or do not involve phase changes. Second, we will describe the qualities that make ceria the SOA STWS redox-active material, as well as its limitations. Third, we will survey some of the most promising candidates to date in the search for materials to supplant ceria, emphasizing the post-ternary, metal-oxide-perovskite alloys. Lastly, we will enumerate and discuss the following materials design directions for STWS redox-active materials: crystal reduction potentials as a proxy for oxygen vacancy formation enthalpies, engineering the electronic and configurational entropy of reduction via f-shells and simultaneous redox, and vetting materials stability via temperature-dependent phase diagrams and melting-point prediction.

08 HYDROGEN↗
DOE OSTI2024

Radiation-Induced Plutonium Redox Chemistry

Plutonium plays a key role in global actinide research and nuclear fuel cycle technologies, and yet, our fundamental understanding of its inherent radiation-induced chemical behavior is limited. These radiation-induced processes cannot simply be switched off, as they are as fundamentally inherent to plutonium as the impact of relativistic effects on its f-electrons. In less chemically complex actinide systems, such as aqueous solutions of neptunium and americium, , radiolysis products play a significant role in the redox cycling of their oxidation states. However, plutonium's multiple, coexisting, and chemically active oxidation states, which comprise of bare ions and dioxo cations, provide additional redox pathways that complicate radiation-induced processes. Oxidation state control is critical for the manipulation of plutonium, especially in used nuclear fuel reprocessing technologies, where oxidation specific states are successfully extracted, and others rejected. Consequently, mechanistically understanding the behavior of plutonium’s multiple oxidation states in the presence of intense ionizing radiation fields is essential for predicting the behavior of this element under multiple conditions that support the development and innovation of nuclear fuel cycle technologies. Here, we present recent advances in our understanding of plutonium radiation chemistry, including the first-ever multiscale model for predicting gamma radiation-induced plutonium redox chemistry, and new chemical kinetics for the reaction of plutonium and its complexes of tributyl phosphate (TBP), N,N-di-(2-ethylhexyl)butyramide (DEHBA), and N,N-di-(2-ethylhexyl)isobutyramide (DEHiBA) with transients radiolysis products, a measured using electron pulse radiolysis.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗