Search NASA⌕ Search

SEARCH · Search NASA

Results for “resolution process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Predicted performance of a tangential viewing hard x-ray camera for the DIII-D high field side lower hybrid current drive experiment

High field side launch of lower hybrid current drive (LHCD) has improved accessibility and penetration over low field side launch on DIII-D. Simulations predict single pass absorption under a wide range of plasma conditions. Hard x-ray (HXR) measurement of LHCD generated fast electron bremsstrahlung (50–250 keV) will validate wave propagation and absorption. Emissivity profiles are recovered from one-dimensional inversion of HXR brightness to determine LH damping location, fast electron slowing down time, and some indication of the fast electron energy. The camera will be implemented by populating 32 tangential sightlines of the existing Gamma Ray Imager with Kromek SPEARTM Cadmium Zinc Telluride (CZT) detectors sensitive to 10–1000 keV photons with 10 keV energy resolution. Expected count rates allow for <0.5 ms time resolution. Pulses are processed using 50 ns shaping time Cremat CR-200 Gaussian shaping modules and are digitized by 25 MHz D-TACQ ACQ216 digitizers. The performance of the HXR camera is evaluated by comparing predicted fast electron density profiles and inverted synthetic brightnesses obtained from the ray-tracing/Fokker–Planck codes GENRAY/CQL3D. Inversions closely matched predicted fast electron profiles for a range of experimental parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Structure of RADX and mechanism for regulation of RAD51 nucleofilaments

Replication fork reversal is a fundamental process required for resolution of encounters with DNA damage. A key step in the stabilization and eventual resolution of reversed forks is formation of RAD51 nucleoprotein filaments on exposed single strand DNA (ssDNA). To avoid genome instability, RAD51 filaments are tightly controlled by a variety of positive and negative regulators. RADX (RPA-related RAD51-antagonist on the X chromosome) is a recently discovered negative regulator that binds tightly to ssDNA, directly interacts with RAD51, and regulates replication fork reversal and stabilization in a context-dependent manner. Here, we present a structure-based investigation of RADX’s mechanism of action. Mass photometry experiments showed that RADX forms multiple oligomeric states in a concentration-dependent manner, with a predominance of trimers in the presence of ssDNA. The structure of RADX, which has no structurally characterized orthologs, was determined ab initio by cryo-electron microscopy (cryo-EM) from maps in the 2 to 4 Å range. The structure reveals the molecular basis for RADX oligomerization and the coupled multi-valent binding of ssDNA binding. The interaction of RADX with RAD51 filaments was imaged by negative stain EM, which showed a RADX oligomer at the end of filaments. Based on these results, we propose a model in which RADX functions by capping and restricting the end of RAD51 filaments.

Science & Technology - Other Topics↗
DOE OSTI2022

Computational approaches to model X-ray photon correlation spectroscopy from molecular dynamics

X-ray photon correlation spectroscopy (XPCS) allows for the resolution of dynamic processes within a material across a wide range of length and time scales. X-ray speckle visibility spectroscopy (XSVS) is a related method that uses a single diffraction pattern to probe ultrafast dynamics. Interpretation of the XPCS and XSVS data in terms of underlying physical processes is necessary to establish the connection between the macroscopic responses and the microstructural dynamics. To aid the interpretation of the XPCS and XSVS data, we present a computational framework to model these experiments by computing the X-ray scattering intensity directly from the atomic positions obtained from molecular dynamics simulations. We compare the efficiency and accuracy of two alternative computational methods: the direct method computing the intensity at each diffraction vector separately, and a method based on fast Fourier transform that computes the intensities at all diffraction vectors at once. Furthermore, the computed X-ray speckle patterns capture the density fluctuations over a range of length and time scales and are shown to reproduce the known properties and relations of experimental XPCS and XSVS for liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Super-resolution image display using diffractive decoders

High-resolution image projection over a large field of view (FOV) is hindered by the restricted space-bandwidth product (SBP) of wavefront modulators. We report a deep learning–enabled diffractive display based on a jointly trained pair of an electronic encoder and a diffractive decoder to synthesize/project super-resolved images using low-resolution wavefront modulators. The digital encoder rapidly preprocesses the high-resolution images so that their spatial information is encoded into low-resolution patterns, projected via a low SBP wavefront modulator. The diffractive decoder processes these low-resolution patterns using transmissive layers structured using deep learning to all-optically synthesize/project super-resolved images at its output FOV. This diffractive image display can achieve a super-resolution factor of ~4, increasing the SBP by ~16-fold. We experimentally validate its success using 3D-printed diffractive decoders that operate at the terahertz spectrum. This diffractive image decoder can be scaled to operate at visible wavelengths and used to design large SBP displays that are compact, low power, and computationally efficient.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Geospatial Diffusion for Land Cover Imperviousness Change Forecasting

Land-use and land-cover (LULC) has a significant effect on several Earth system processes. For example, impervious surfaces reduce infiltration and speed water flow, impacting regional hydrology and flood risk. While Earth System models have improved forecasting hydrologic and atmospheric processes at higher resolutions, the ability to forecast LULC change has lagged behind. In this paper, we propose a new paradigm exploiting Generative AI (GenAI) for land cover change forecasting by framing it as a data synthesis problem conditioned on historical and auxiliary data-sources. To demonstrate the feasibility of our methodology, we perform experiments where a diffusion model is trained for decadal forecasting of imperviousness change across the entire United States. We find that our model yields MAE lower than a no-change baseline for resolutions ≥ 0.7 X 0.7km2 on average, demonstrating its ability to capture and project accurate spatiotemporal patterns. Finally, we discuss future research to incorporate Earth's physical properties and enabling scenario simulations via driver variables.

Varshney, Debvrat [ORNL] (ORCID:0000000188981736)↗
DOE OSTI2023

Automatic Point Cloud Building Envelope Segmentation (AutoCuBES)

The Auto-CuBES algorithm is based on unsupervised machine learning that automatically labels 3D point cloud data and reduces the time spent in manual segmentation. The algorithm can process high-resolution point clouds and generate a wire-frame building envelope model with a small set of calibration parameters. The algorithm inputs a 3D point cloud generated by commonly available surveying equipment and outputs a wire-frame model of the building envelope. Unsupervised machine learning methods were used to identify facades, windows, and doors while minimizing the number of calibration parameters.

Puente, BryanMaldonado↗
DOE OSTI2024

Mechanical and Thermal Forcing for Upslope Flows and Cumulus Convection over the Sierras de Córdoba

Abstract The upslope flow processes affecting the vertical extent of orographic cumulus convection are examined using observations from the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign. Specifically, clear air returns from the U.S. Department of Energy (DOE) second-generation C-band scanning Atmospheric Radiation Measurement (ARM) precipitation radar (CSAPR2) are used to characterize the structure and variability of the ridge-normal (i.e., up/downslope) flow components, which transport mass to the crest of Argentina’s Sierras de Córdoba and contribute to convective initiation. Data are compiled for the entire CACTI period (October–April), including days with clear skies, shallow cumuli, cumulus congestus, and deep convection. To examine shared variability among >70 000 radar scans, we use (i) a principal component analysis (PCA) to isolate modes of variability in the upslope flow and (ii) composite analysis based on convective outcomes, determined from GOES-16 satellite observations. These data are contextualized with observed surface sensible heat fluxes, thermodynamic profiles, and synoptic-scale analysis. Results indicate distinct thermally and mechanically forced upslope flow modes, modulated by diurnal heating and synoptic-scale variations, respectively. In some instances, there is a superposition of thermal and mechanical forcing, yielding either deeper or shallower upslope flow. The composite analyses based on satellite data show that successively deeper convective outcomes are associated with successively deeper upslope flow layers that more readily transport mass to the ridge crest in conjunction with lower lifting condensation levels, facilitating convective initiation. These results help to isolate the forcing mechanisms for orographic convection and thus provide a foundation for parameterizing orographic convective processes in coarse resolution models.

Meteorology & Atmospheric Sciences↗
DOE OSTI2020

Understanding Microstructural Effects on Dynamic Performance Towards the Development of Shock Metamaterials

With the recent advances in additive manufacturing (AM), long-range periodic lattice assemblies are being developed for vibration and shock mitigation components in aerospace and military applications with unique geometric and topological structures. There has been extensive work in understanding the static properties associated with varying topology of these lattice architectures, but there is almost no understanding of microstructural affects in such structures under high-strain rate dynamic loading conditions. Here we report the shock behavior of lattices with varying intrinsic grain structures achieved by post process annealing. High resolution 316L stainless steel lattices were 3D printed by a laser-powder bed fusion machine and characterized by computed tomography. Subsequent annealing resulted in stress-relieved and recrystallized lattices. Overall the lattices had strong cubic texture aligning with the x-, y- and z-directions of the build with a preference outside the build direction (z). The recrystallized sample had more equiaxed polygonal grains and a layer of BCC ferrite at the surface of the structure approximately 1 grain thick. Upon dynamic compression the as-deposited lattice showed steady compaction behavior while the heat-treated lattices exhibit negative velocity behavior indicative of failure. We attribute this to the stiffer BCC ferrite in the annealed lattices becoming damaged and fragmenting during compression.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unresolved resonance region cross section measurements and validation [Slides]

This presentation discusses the ENDF format and its implication for experimental data. The effect of self-shielding on measured cross sections some call this effect transmission enhancement (to be explained). Additionally discussed: from experiment to evaluation. And finally, Processing “high energy resolution” transmission for URR evaluation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

GCAM-USA v5.3_water_dispatch: integrated modeling of subnational US energy, water, and land systems within a global framework

Abstract. This paper describes GCAM-USA v5.3_water_dispatch, an open-source model that represents key interactions across economic, energy, water, and land systems in a consistent global framework with subnational detail in the United States. GCAM-USA divides the world into 31 geopolitical regions outside the United States (US) and represents the US economy and energy systems in 51 state-level regions (50 states plus the District of Columbia). The model also includes 235 water basins and 384 land use regions, and 23 of each fall at least partially within the United States. GCAM-USA offers a level of process and temporal resolution rare for models of its class and scope, including detailed subnational representation of US water demands and supplies and sub-annual operations (day and night for each month) in the US electric power sector. GCAM-USA can be used to explore how changes in socioeconomic drivers, technological progress, or policy impact demands for (and production of) energy, water, and crops at a subnational level in the United States while maintaining consistency with broader national and international conditions. This paper describes GCAM-USA's structure, inputs, and outputs, with emphasis on new model features. Four illustrative scenarios encompassing varying socioeconomic and energy system futures are used to explore subnational changes in energy, water, and land use outcomes. We conclude with information about how public users can access the model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1972

A range expanding signal conditioner

Telemetry system modifications to improve signal resolution are described. Process uses zero suppression technique which consists of subtracting known voltage from input and amplifying remainder. Schematic diagram of circuit is provided and details of operation are presented.

Russell, W. A.↗
NASA NTRS1975

New capabilities for the Wallops Island SPANDAR

Systems incorporated into the SPANDAR to increase spatial resolution and data processing capabilities are described. They include a minicomputer that performs real-time formatting of video data, rapid antenna scan control, and control of a digital integrator; a frequency diversity technique for faster accumulation of independent video samples; the on-line calibration system for insertion of high and low calibration signals during every PRF interval; and utilization of a large capacity, high speed computer. The resultant data will be used to create statistical thunderstorm models for designing microwave communications systems.

Kropfli, R. A.↗
NASA NTRS1975

Image degradation in aerial imagery duplicates

A series of Earth Resources Aircraft Program data flights were made over an aerial test range in Arizona for the evaluation of large cameras. Specifically, both medium altitude and high altitude flights were made to test and evaluate a series of color as well as black-and-white films. Image degradation, inherent in duplication processing, was studied. Resolution losses resulting from resolution characteristics of the film types are given. Color duplicates, in general, are shown to be degraded more than black-and-white films because of the limitations imposed by available aerial color duplicating stock. Results indicate that a greater resolution loss may be expected when the original has higher resolution. Photographs of the duplications are shown.

Lockwood, H. E.↗
NASA NTRS1982

APQ-102 imaging radar digital image quality study

A modified APQ-102 sidelooking radar collected synthetic aperture radar (SAR) data which was digitized and recorded on wideband magnetic tape. These tapes were then ground processed into computer compatible tapes (CCT's). The CCT's may then be processed into high resolution radar images by software on the CYBER computer.

Griffin, C. R.↗
NASA NTRS1985

The GOES-G and -H spacecraft design

The design of the Geostationary Operational Environmental Satellites (GOES) uses newer technology and has expanded capability relative to the predecessor GOES series of satellites. The satellite directly transmits day and night observations of hemispheric-scale weather, hurricanes, and other more localized severe storms and relays processed high-resolution observation data along with weather facsimile (WEFAX) data. Weather observations are generated in the visible and infrared spin scan radiometer (VISSR) atmospheric sounder (VAS). The VAS performs visible and infrared imaging as well as multispectral imaging (MSI) and temperature sounding of the atmosphere. The satellite provides direct interrogation and simultaneous relay transmission between the command data acquisition station (CDAS) and the multiple, widely dispersed data collection platforms (DCP). The satellites also monitor the condition of the earth's magnetic field, energetic particle flux, and X-ray emissions from the sun. The satellite performs all communications functions by means of a multifunction communications system that operates on S-band and uhf frequencies at rates varying from 100 bit/s to 28 megabit/s. An experimental capability for the detection of the emergency locator transmitter beacons is included in the GOES-GH design as a part of the international satellite-aided search and rescue system.

Fermelia, L. R.↗
NASA NTRS1987

A study of carbon monoxide distribution determinations for a global transport model

A system of programs which model the chemistry and transport of carbon monoxide and methane in the Earth's atmosphere on a global scale was installed onto the NASA-Langley central scientific computer network. This system, the GLOBAL system, consists of a user-friendly set of procedural files which allow for simplified pre-processing, execution, and post-processing for all program elements. The package includes procedures for obtaining the NMC meteorological data, calculating the vertical winds to satisfy mass conservation, determining the boundary layer, and executing the transport/chemical model for carbon monoxide. In addition, plotting, saving to tape, and reading from tape routines were developed. Final modifications to the subprograms for processing the input data for the transport/chemistry model have improved these data to more accurately reflect true atmospheric conditions. The transfer of the transport/chemistry model from the NCAR CRAY system to the NASA-Langley VPS-32 system was completed. The problems encountered during this process and their resolutions are discussed.

Peters, Leonard K.↗
NASA NTRS1988

An albedo map of P/Halley on 13 March 1986

An albedo map is presented of comet Halley from a 10 micrometer image taken from the Wyoming Infrared Observatory on 13 Mar. 1986, and a 7311 A CCD image taken from the Anglo-Australian Telescope about an hour later. To construct this map, the CCD image was first converted from 0.49 arcsec/pixel to 1 arcsec/pixel to match the scale of the 10 micron image, then both were calibrated in lambda F sub lambda units. According to the albedo map, most of the inner coma of Halley lies between gamma = 0.04 and 0.08. The overall smoothness of the map is remarkable considering the large dynamic range of the optical and IR maps, and the differences in spatial resolution and image processing.

Hayward, Thomas L.↗
NASA NTRS1989

Photodissociation of CO in the thermosphere of Venus

Recent investigations of CO photoabsorption demonstrate that photodissociation longward of the ionization threshold at 88.5 nm occurs primarily through line absorptions rather than continuous processes. High-resolution photoabsorption cross sections for CO at rotational temperatures near 250 K have been constructed from the improved data on dissociating transitions. The effects of the new cross sections on the rate of solar photodissociation of CO in the thermosphere of Venus are examined, and the results are compared to values obtained with the lower resolution cross sections available previously. It is found that the photodissociation profile peaks slightly higher in the atmosphere and the peak value and integrated total rate both decrease by about a factor of two.

Fox, J. L.↗