Search NASA⌕ Search

SEARCH · Search NASA

Results for “rheological additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dynamic, hollow nanotubular networks with superadjustable pH-responsive and temperature resistant rheological characteristics

Recently, the interest in stimuli-responsive and adaptable materials has continuously grown in various fields and applications. For such responsive systems, different triggers, including pH, light, pressure, temperature, and electric field, have been utilized to control dynamics and assembly. Among these, pH is one of the most convenient, energy-efficient, and economic modalities. Besides, plenty of traditional materials have poor thermal and salt stability, limiting their applications. Herein, we report a new design of a pH-responsive viscoelastic supramolecular complex (VSC) based on commplexation of a new long-chain amino-amide and maleic acid. In this study, the system demonstrated a sol–gel-sol transition from pH 2 to 10, with the largest static viscosity occurring at pH 6 (~1000 Pa·s) and the smallest viscosity at pH 4 (~3.3 Pa·s), indicating ~ 300-fold control over the viscosity. For a given concentration, the static viscosity of VSC was about 15 times larger than that of CTAB/NaSal, a well-established dynamic viscoelastic system, and no pH-responsiveness was observed for the traditional system. In addition, the VSC demonstrated a superior temperature tolerance and lower temperature dependence. The potential of these intriguing dynamics viscoelastic systems was evaluated for hydraulic fracturing and enhanced oil recovery applications. Proppant settling velocity of DMAA/MA was 500 ~ 1000 times lower than that of CTAB/NaSal and common traditional polymers. Likewise, the oil recovery percentage could be significantly improved with the utilization of DMAA/MA compared to the CTAB/NaSal (86 % vs 52 %). Aside from applications in hydraulic fracturing and enhanced oil recovery, we anticipate that the intriguing rheological properties of this viscoelastic system can be beneficial for other chemical engineering applications including personal care products, cosmetics, lubricants, and biomedical gels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1973

Friction losses in a lubricated thrust-loaded cageless angular-contract bearing

The NASA spinning torque apparatus was modified to measure the spinning torque on a cageless ball thrust bearing. Friction torque was measured for thrust loads varying from 44.5 to 403 newtons (10 to 90 lb) at speeds of 1000, 2000, and 3000 rpm. Tests were conducted with di-2-ethylhexyl sebacate and a synthetic paraffinic oil. These tests were run with either oil jet lubrication or with a thin surface film of lubricant only. An analytical model which included rolling resistance was developed and extended from previous models for spinning torque and lubricant rheology. The model was extended by the inclusion of rolling resistance. The computed values were in fair agreement with the experimental results and confirmed previous hypotheses that a thin lubricant film gives minimum bearing torque and an oil jet flow of a viscous lubricant will result in considerable rolling torque in addition to the torque due to ball spin.

Townsend, D. P.↗
DOE OSTI2021

Fatigue of laser powder bed fusion processed 17-4 stainless steel using prior process exposed powder feedstock

The rapid pace of development seen in the metal additive manufacturing (AM) process of laser powder-bed fusion (LPBF) requires in-step advances in processes qualification to enable full-scale adoption. This particularly applies to quantifying how powder feedstock conditions impact end-component quality. Here this study examines how in-machine 17-4 stainless steel powder feedstocks are affected by prior LPBF processes, and how these effects impact subsequent builds. Examinations of powder morphology, chemistry, flowability, and rheology were conducted to characterize the powder conditions. The resultant effects of powder feedstock condition on produced component quasi-static tensile and high-cycle fatigue properties were analyzed. Fatigue life was analyzed using a reliability modeling approach that enabled a robust statistical comparison of life. Powder characteristics were found to evolve with powder exposure to prior LPBF processes, particularly in the extremes of powder size distribution and measures of bulk flow. No significant effects of these changes on tensile properties were observed. Reliability modeling methods, including the lognormal and Weibull distributions as well as the empirical survival function, are shown to be effective tools for modeling fatigue variability in LPBF manufactured components. Through these tools, fatigue life was found to be invariant with changes in powder condition.

42 ENGINEERING↗
DOE OSTI2024

LDRD poster - Identifying the speciation of salt-based actinides in the presence of contaminants

Molten salt reactors (MSRs) are among the most promising Generation IV nuclear reactors. The salts used in these reactors exhibit a high affinity for moisture and oxygen, and heating does not eliminate the oxides that are formed. Additionally, due to the high operating temperatures, reactor parts experience pronounced corrosion, and the resulting corrosion products integrate into the fuel salt system. It is hypothesized that the speciation of f-elements in molten salts would change in the presence of oxides and corrosion products. These changes in local structure can alter the rheological properties, which are critical to the operational and safety parameters of the reactors. Therefore, an in-depth understanding of how corrosion products influence lanthanide/actinide speciation is crucial. To test this hypothesis, lanthanides (as surrogates for actinides) and actinide chlorides were mixed with oxides (such as nickel oxide and lithium oxide) and/or corrosion products (e.g., nickel chloride) and reacted in molten salts. The resulting phases were analyzed using techniques such as powder X-ray diffraction, Raman spectroscopy, UV-Visible spectroscopy, and nuclear magnetic resonance spectroscopy. In the presence of oxides, due to the high oxophilicity of f-elements, these elements capture oxygen from the oxides, forming lanthanide/actinide oxide or oxychloride phases. Specifically, with cerium chloride, the introduction of lithium oxide to the formation of various final products depending on the oxide concentration. At lower oxide concentrations, cerium oxychloride (CeOCl) in the +3 oxidation state was observed, while an increase in the oxide concentration led to the formation of cerium dioxide (CeO2), where cerium is in the +4 oxidation state. In contrast, with nickel oxide, CeOCl formation was consistently observed, regardless of the oxide concentration. This project successfully determined that the speciation of f-elements change in the presence of oxides and different oxides in molten salts result in different final products. When the influence of nickel chloride was examined, changes in f-element speciation were not observed. However, it reacted with lithium chloride to generate a lithium-nickel-chloride (Li6NiCl8) phase, which was also observed when nickel oxide was reacted. Computational models were developed to simulate the phases anticipated under experimental conditions.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
NASA NTRS2016

Rheological Properties of Quasi-2D Fluids in Microgravity

Freely suspended smectic films of sub-micrometer thickness and lateral extensions of several millimeters are used to study thermally driven convection and diffusion in the film plane. The experiments were performed during a six minute microgravity phase of a TEXUS suborbital rocket flight (Texus 52, launched April 27, 2015). The project served as a preliminary test for a planned ISS Experiment with liquid crystal films (OASIS), and in addition it provided new experimental data on smectic films exposed to in-plane thermal gradients.We find an attraction of the smectic material towards the cold edge of the film in a temperature gradient, similar to a Soret effect. This process is reversed when this edge is heated up again. Thermal convection driven by two thermocontacts in the film is practically absent, even at temperature gradients up to 10 Kmm, thermally driven convection sets in when the hot post reaches the transition temperature to the nematic phase.An additional experiment was performed under microgravity conditions to test the stability of liquid crystal bridges in different smectic phases.

microgravity↗
DOE OSTI2024

Shelf-Stable Bingham Plastic Polyurethane Thermosets for Additive Manufacturing

Here, this study presents an innovative 3D-printing method for fabricating hybrid-hardness polyurethane (PU) thermosets via direct-ink writing (DIW). This method features an unprecedentedly long pot-life of at least 16 months for uncured material, achieved by employing internally-blocked polymeric uredines as the isocyanate source. This innovation not only extends pot life but also broadens the pre-print processing temperature range. Surface-modified fumed silica, used as a rheology modifier, ensures the maintenance of Bingham fluid characteristics. Rigorous evaluations, including DSC, tensile tests, SEM, OM, and μ-CT, verify the material’s uniform and nearly isotropic structure, devoid of defects. DMA analysis reveals that these 3D-printed PUs withstand processing temperatures up to 240°C. The practical application of this technology is demonstrated through the successful 3D printing of a shoe sole, showcasing the ability to incorporate regions of varying hardness, highlighting the versatile property customization of this method.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Addition Polyimides from Non-Mutagenic Diamines

Studies were conducted to find an acceptable non-mutagenic diamine to replace 4,4'-methylenedianiline (MDA), a suspect carcinogen, which is currently being used in PMR-15 polyimide applications. Several diamines containing fluorine and trifluoromethyl substituent groups were synthesized. The diamines were polymerized with the dimethyl ester of 3,3',4,4'-benzophenone tetracarboxylic acid (BTDE), using the monomethyl ester of nadic acid (NE) as an endcap. The effect of diamine structure on rheological properties, glass transition temperature, and thermo-oxidative stability was investigated. Unidirectional laminates were fabricated from selected resins, using carbon fiber as the reinforcement. The results indicate that some of the diamines containing trifluoromethyl groups are non-mutagenic, and have potential to replace MDA in PMR polyimides for long-term applications at temperatures up to 300 C.

Delvigs, Peter↗
DOE OSTI2020

Collaborative Research: Polymer Macrocycles: A novel topology to control dynamics of rubbery materials

Understanding the dynamics of polymers of different topologies is an important field of study and one of the most important unanswered questions in this field is "how do circular polymers move," particularly in the melt state. New information suggests that molecular topology, specifically circular rings, impacts the response of materials in nanometer- scale confinement. The work performed here tackles these subjects through a collaboration in which specialists in polymer synthesis, polymer rheology and scattering methods, and in the physics of nanoconfinement work together to investigate the thermophysical behavior of circular macromolecules. The project goals are to use a novel synthesis method of "green" oxidative polymerization to produce high purity macrocycles and to investigate their linear viscoelastic behavior in order to fully characterize the dynamics of circular macromolecules to sizes that correspond to linear molecule entanglement densities higher than previously obtainable with synthetic polymers. Chemical chain end characterization and critical edge fractionation coupled with direct visualization of the prepared polymers through the use of polymer amplification methods are proposed in order to quantify the numbers of circular and linear molecules in each sample. The study of the linear viscoelastic response of blends of linear and circular molecules is also to be undertaken in the project. Nonlinear viscoelastic measurements, including extensional viscosity, are to be made. Strong differences in behavior between linear chains and circular ones also provides an important opportunity for new technology to break the "magic triangle" for tires: it is believed that improving one of the three key attributes - traction, wear, rolling resistance - necessarily sacrifices at least one of the others. Rubber made from cyclic polymers has the potential to break out of this triangle by reducing the so-called Payne effect in reinforced rubbers because circular macromolecules are less sensitive to nanoconfinement than their linear counterparts. The work has as one objective to characterize the impact of nanoconfinement on the behavior of large circular macromolecules. In addition, the dynamics of carbon black filled circular macromolecules are to be studied to test the hypothesis that the resulting rubbery materials will exhibit a reduced Payne effect.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Rheology and engine performance of very low sulfur fuel oil blended with 10% fast pyrolysis and hydrothermal liquefaction oils in a 2-stroke crosshead engine

The performance and emissions for a downscaled single-cylinder 2-stroke crosshead engine were determined for a very low sulfur fuel oil (VLSFO) when blended with 10 wt.% fast pyrolysis (FP) or hydrothermal liquefaction (HTL) bio-intermediates. The FP and HTL oils were derived from biomass and were observed to contain lower molecular weight (MW) hydrocarbons than neat VLSFO (which was evaluated as a baseline comparison). The addition of either biofuel reduced the overall viscosity of the VLSFO. Aging tests at 50, 90, and 120°C showed that the dynamic viscosity of VLSFO increased with exposure time up to two weeks. Similar trends were observed for the FP and HTL blends, but a pronounced spike in viscosity occurred for these fuels during the early period of exposure. None of the viscosity increases exceeded the operational limits of fuel system pumps. Engine performance studies were conducted under low, medium and high load operational settings. The relative performance of the test fuels was highly dependent on operating condition. In general, the engine results for the three test fuels were similar, but modest improvements in brake thermal efficiency and brake specific fuel consumption were observed, which may be attributed to the heightened reactivity of low molecular weight fraction of the FP and HTL oils.

09 BIOMASS FUELS↗
DOE OSTI2025

Resin chemistry and particle size influence on stereolithography with silicon carbide

Stereolithography (SLA) is an established process able to produce high resolution polymer parts with complex geometries. Silicon carbide (SiC) has uses in a variety of applications, but traditionally was difficult to manufacture into complex geometries. There have been advances in producing SiC through SLA using a SiC-derived ceramic such as silicon oxycarbide (SiOC). In this study, a slurry using a commercially available resin as the base material with additional modifiers was investigated to create a SiC slurry ready for pressureless sintering. The effects of photoinitiator, dispersant and a bimodal distribution of SiC particle sizes was studied using a design of experiments (DOE). A slurry with a bimodal distribution of 70 % coarse and 30 % fine SiC powder at 40 % solids loading by volume was prepared and successfully printed. Rheology measurements show the slurry to have viscoelastic shear thinning behavior below the recommended 1000 Pas necessary for printing. Printing parameters for the new material on a commercially available SLA printer were studied parametrically. The laser marking speeds found to print the slurry was 260 mm/s and 130 mm/s. A slurry and printing parameters were determined to produce a green part with a proposed debinding cycle.

Herd, Tien [ORNL]↗
DOE OSTI2025

Additive manufacturing of high explosives with inert dilution for wave shaping and detonation velocity grading

The performance of a high explosive charge is highly influenced by the detonation velocity and any inherent internal structure. Additively manufactured (AM) high explosive charges allow for a precisely engineered internal structure and the selective placement of discrete or graded volumes of a tailored material, which are unachievable by conventional means. The dilution of a solid explosive by an inert additive for detonation velocity reduction is herein evaluated for a method of material extrusion called a direct-ink-write AM, where an 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane-based ultraviolet -curable energetic-binder paste explosive was diluted by the inert density mock 5-iodo-2′-deoxyuridine for use in the manufacture of multi-material explosive charges. The explosive ink was characterized for printing by rheological and particle size measurements, and the detonation velocities for 0–40 wt. % inert diluent were found to have a continuous linear reduction in detonation velocity down to 14.3% difference. A two-component 3D plane wave explosive lens with 8.038 km/s “fast” and 7.491 km/s “slow” diluted ink in an internal cone demonstrated a reduced time of breakout at the output face from 361 to 53 ns. A linearly graded “fast–slow–fast” cylinder was successfully printed and fired, showing engineered control along the length of the charge as the detonation velocity dropped from 7.851 to 6.700 km/s and then recovered to 7.241 km/s. The extreme control over the internal composition of a high explosive charge via a dual-material extruder/mixer challenges conventional manufacturing approaches and opens new avenues for engineered detonation wavefronts, high explosive charge performance, and new applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Correlating viscosity and die swell in 3D printing of polyphenylsulfone: A thermo-mechanical optimization modus operandi

Additive manufacturing (AM) of polyphenylsulfone (PPSU), an amorphous high-performance polymer (HPP), has shown promise in exhibiting structural integrity for many applications. With thermoplastic material extrusion 3D printing, parts consisting of layered melts exhibited voids, where the adhesion quality and void size depend on the processing parameters implemented during printing. However, the structure-process-property (SPP) relationships between the thermal properties and rheological and mechanical behavior of AM PPSU are poorly understood. Here, in this study, a comprehensive analysis of the thermal, thermo-mechanical, and layer-by-layer build-up of PPSU is investigated and correlated with viscosity and extrudate die swell behavior with void fraction volume as confirmed by high-resolution x-ray computed tomography (XCT). Gas chromatography–mass spectrometry (GC–MS) pyrolysis confirmed PPSU composition and degradation at 480 °C, consistent with thermo-gravimetric analysis TGA. A 141% difference in viscosity was observed when processing temperatures increased from 350 °C to 400 °C. Likewise, extrudate die swell decreased with increasing temperatures, resulting in a 17% difference. Tensile and compressive properties confirmed that higher extruding temperatures resulted in lower porosity and higher mechanical strength. In general, higher extruding temperatures lower the viscosity to allow for stronger cohesion between layers; however, increasing the temperature too high results in a below unity extrudate die swell, reducing mechanical properties. Therefore, to optimize the mechanical integrity of 3D printed amorphous PPSU parts, an increase in the viscosity, near unity of the extrudate die swell, and tempered extrusion temperature are needed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Revealing meso-structure dynamics in additive manufacturing of energy storage via operando coherent X-ray scattering

3D printing is an emerging technology for the fabrication of energy storage devices, offering advantages over traditional manufacturing methods. However, optimization and design of such devices requires an understanding of the meso-structure formation during the 3D printing process. This study utilizes operando coherent X-ray scattering, X-ray Photon Correlation Spectroscopy (XPCS), to study the spatiotemporally-resolved far-from-equilibrium dynamics during direct ink writing 3D printing. Here, Lithium Titanate (LTO) based ink is prepared and rheologically tested for its shear-thinning properties. Two-time intensity-intensity functions are calculated to be used in subsequent quantitative analysis, which allows for an overall characterization of the dynamics, description of an initial fast decorrelation and identification of sudden rearrangements of subdomains of the sample. The results show the dynamics to be anisotropic, spatiotemporally heterogenous and marked by distinct rearrangement events, all of which impact the electrochemical performance of energy storage devices. The studied 3D printing ink is used to fabricate electrodes which are then electrochemically tested, showing good performance in cycling and retaining structural integrity. This work furthers the understanding of the far-from-equilibrium material dynamics during 3D printing, giving quantitative characterization of this process, and highlights aspects of structure formation relevant to the electrochemical performance of the resultant energy storage device.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Stability and rheology of dispersions of silicon nitride and silicon carbide

The relationship between the surface and colloid chemistry of commercial ultra-fine silicon carbide and silicon nitride powders was examined by a variety of standard characterization techniques and by methodologies especially developed for ceramic dispersions. These include electrokinetic measurement, surface titration, and surface spectroscopies. The effects of powder pretreatment and modification strategies, which can be utilized to augment control of processing characteristics, were monitored with these technologies. Both silicon carbide and nitride were found to exhibit silica-like surface chemistries, but silicon nitride powders possess an additional amine surface functionality. Colloidal characteristics of the various nitride powders in aqueous suspension is believed to be highly dependent on the relative amounts of the two types of surface groups, which in turn is determined by the powder synthesis route. The differences in the apparent colloidal characteristics for silicon nitride powders cannot be attributed to the specific absorption of ammonium ions. Development of a model for the prediction of double-layer characteristics of materials with a hybrid site interface facilitated understanding and prediction of the behavior of both surface charge and surface potential for these materials. The utility of the model in application to silicon nitride powders was demonstrated.

Feke, Donald L.↗
DOE OSTI2022

Large-scale reactive thermoset printing: Complex interactions between temperature evolution, viscosity, and cure shrinkage

Thermoset composites are strong candidates for large-scale material extrusion additive manufacturing (AM). However, uncured thermoset composites become unstable as print height increases. Here, chemical initiation of vinyl ester immediately before deposition was used to suppress collapse and enable large-scale thermoset printing. Structural stability was assessed by printing thin walls at various layer times and monitoring thermal gradients with an infrared camera. Stable printing was observed at a layer time of 4.50 min, approximately half the gel time of the material (8 min). Self-weight collapse occurred at short layer time (0.68 min), whereas warpage occurred at long layer time (6.50 min). Here, a new behavior was discovered at intermediate layer time (2.25 min) where the heat generated by the reaction causes new, un-gelled layers to flow. Forced convection eliminates this behavior, stabilizing the 2.25-min layer time print. These findings motivated development of a less exothermic material system, which was used to print a large-scale mold and demonstrate the value of this understanding. By presenting these challenges of large-scale reactive thermoset AM for the first time, this work motivates focused studies of the complex interplay between rheological, thermal, and chemical behaviors to improve the feasibility of large-scale thermoset AM. Tensile properties of the printed material were also measured. Longitudinal and transverse elastic moduli are 3.79 and 2.95 GPa, respectively, and corresponding tensile strengths are 36.11 and 18.83 MPa. The glass transition temperature is 93.13 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Relaxation dynamics of deformed polymer nanocomposites as revealed by small-angle scattering and rheology

Here, the relaxation dynamics of polystyrene (PS)/silica nanocomposites after a large step deformation are studied by a combination of small-angle scattering techniques and rheology. Small-angle X-ray scattering measurements and rheology show clear signatures of nanoparticle aggregation that enhances the mechanical properties of the polymer nanocomposites (PNCs) in the linear viscoelastic regime and during the initial phase of stress relaxation along with accelerated relaxation dynamics. Small-angle neutron scattering experiments under the zero-average-contrast condition reveal, however, smaller structural anisotropy in the PNCs than that in the neat polymer matrix, as well as accelerated anisotropy relaxation. In addition, the degrees of anisotropy reduction and relaxation dynamics acceleration increase with increasing nanoparticle loading. These results are in sharp contrast to the prevailing viewpoint of enhanced molecular deformation as the main mechanism for the mechanical enhancement in PNCs. Furthermore, the observed acceleration of stress relaxation and reduction in structural anisotropy point to two types of nonlinear effects in the relaxation dynamics of PNCs at large deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Correlating inter-particle forces and particle shape to shear-induced aggregation/fragmentation and rheology for dilute anisotropic particle suspensions: A complementary study via capillary rheometry and in-situ small and ultra-small angle X-ray scattering

Predicting the stability of suspensions composed of anisotropic particles is difficult due to the complexity and interplay of hydrodynamic and colloidal forces. For example, it is not well understood how non-spherical particle shapes affect suspension-rheological responses. This study presents evidence showing how the stacking of boehmite platelets dispersed in aqueous solution leads to moderate shear thinning, even at low boehmite mass fractions. Wide angle X-ray, small angle X-ray, and ultra-small angle X-ray scattering were used to simultaneously monitor changes to the size and fractal dimensions of boehmite aggregates from 6 – 10,000 Å as the sample was recirculated through an in situ capillary rheometer. The latter also provided simultaneous measurements of the viscosity of the suspensions. Computational fluid dynamics modeling of the apparatus was used to provide a more rigorous analysis of the fluid flow. In addition to shear-induced aggregation/fragmentation correlated to a complicated balance between hydrodynamic and colloidal forces, the results indicate that orientationally-dependent interactions, arising from non-spherical boehmite aggregate sub-units, may explain the relatively large experimental viscosity when the hydrodynamic force is small compared to colloidal forces. Ultimately, the results from this study can provide a foundation for future work investigating particle shape effects on colloidal and hydrodynamics forces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗