SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Quasi-omnidirectional resonant array of circumferential shunt slots in ring waveguides for narrow bandwidth space vehicle applications at microwave frequencies
Center-frequency drift in diode lasers can be reduced by stabilizing the laser to an optical cavity with a low bandwidth feedback loop that acts on the injection current. Resonant optical feedback from a confocal or ring cavity can reduce high frequency noise, yielding linewidths in the 10 kHz range. With either an optical or an electronic lock to a cavity, the laser's wavelength is restricted to those regions that can be reached by temperature and current tuning of the solitary diode; this can be extended to full coverage by means of an extended cavity with a frequency-selective component, such as a diffraction grating.
The particle acceleration processes here studied are driven by the relaxation of unstable ion ring distributions; these produce strong wave activity at the lower hybrid resonance frequency which collapses, and forms energetic electron and ion tails. The results obtained are applied to the problem posed by the production of energetic particles by solar flares. The numerical simulation results thus obtained by a 2 1/2-dimensional particle-in-cell code show a simultaneous acceleration of electrons to 10-500 keV energies, and of ions to as much as the 1 MeV range; the energy of the latter is still insufficient to account for gamma-ray emission in the 4-6 MeV range, but furnish a seed population for further acceleration.
An experimental investigation has been carried out on the production of high intensity tones by axisymmetric ring cavities. Maximum sound production occurs during a double resonance at Strouhal numbers which depend only on the local flow velocity independent of cavity location. Values of sound pressure of about 115 dB at 1 meter distance can be generated by axisymmetric ring cavities on projectiles moving at a relatively low flight speed equal to 65 m/s. Frequencies in the audible range up to several Kilo Hertz can be generated aeroacoustically.
An experimental investigation has been carried out on the production of high-intensity tones by axisymmetric ring cavities. Maximum sound production occurs during an acoustic resonance at Strouhal numbers, which depend only on the local flow velocity independent of cavity location. Values of sound pressure of about 115 dB at 1-m distance can be generated by axisymmetric ring cavities on projectiles moving at a relatively low flight speed equal to 70 m/s. Frequencies in the audible range up to several kilohertz can be generated aeroacoustically. A simple analytical model has been developed to explain the experimental observations.
The Voyager mission revealed a complex system of rings and ring arcs around Neptune and uncovered six new satellites, four of which occupy orbits well inside the ring region. Analysis of Voyager data shows that a radial distortion with an amplitude of approximately 30 kilometers is traveling through the ring arcs, a perturbation attributable to the nearby satellite Galatea. Moreover, the arcs appear to be azimuthally confined by a resonant interaction with the same satellite, yielding a maximum spread in ring particle semimajor axes of 0.6 kilometer and a spread in forced eccentricities large enough to explain the arc's 15-kilometer radial widths. Additional ring arcs discovered in the course of this study give further support to this model.
In the present consideration of the structural and particle properties of Saturn's rings, emphasis is given to spacecraft observations and an attempt is made to relate observed properties to favored causative processes. While the ring particles are primarily icy, there is evidence for compositional variation on both local and regional scales. Ring structure is generally dominated by collisional and gravitational dynamics. On the basis of such features as orbital resonances with various satellites, which drive spiral density and bending waves, the ring mass density and local vertical thickness can be determined.
The conditions for resonant wave amplification in a plasma with a ring-beam distribution which is intended to model pick-up ions in a cometary environment are investigated. The inclination between the interplanetary field and the solar wind is found to play a crucial role in governing both the resonant frequency and the growth rate of any unstable mode. It is suggested that the low-frequency MHD mode should experience the most rapid amplification for intermediate inclination. In the frame of the solar wind, such waves should propagate along the field in the direction upstream toward the sun with a phase speed lower than the beaming velocity of the pick-up ions. This mechanism may account for the presence of the interior MHD waves noted by satellites over a region surrounding comets Giacobini-Zinner and Halley.
Several noteworthy phenomena in Saturn's rings were investigated which have until now received an inadequate amount of attention. Among these are the periodic variation of the spokes in the B ring and eccentric features throughout the rings. One of the major discoveries by Voyager was the existence of eccentric features within the predominantly circular rings of Saturn. Several of these nonaxisymmetric features are narrow elliptical rings which share many characteristics with the rings of Uranus. In recent work, two narrow ringlets were added to the list of eccentric features in the rings of Saturn. Voyager imaging and occultation data are now in hand, as well as image-processing software which allows accurate absolute positional measurements to be made in Voyager imaging data. Work is in progress to re-examine this region of Saturn's rings and to study the possibility of a dynamical interaction between the outer B ring edge, the Huygens ringlet and the nearby Mimas 2:1 resonance. An understanding of the kinematics and dynamics of this region promises to yield important clues to a matter of great interest in both theoretical and observation ring studies.
Explorer 45 satellite data on the stormtime proton ring current are reported and analyzed. Storm-associated variations of equatorially mirroring protons, interactions between the ring current and the plasmapause, and storm recovery phase behavior are discussed. Pitch-angle distributions are plotted as a function of proton energy and radial distance, the structure implying domination of pitch-angle diffusion of ring-current protons in the plasmapause region by resonant interactions with ion cyclotron waves during storm recovery. The anisotropic precipitation in the plasmapause region and the more poleward isotropic precipitation observed at low altitudes outside the plasmapause are compared and distinguished.
The physical processes that occur in planetary rings are discussed. The theoretical arguments leading to the conclusion that Saturn's rings are solid particles in nonuniform rotation are summarized, and the optical depth, thickness, and particle size of the rings are discussed. The influence of nearby satellites on the rings is analyzed, and asymmetries in the rings are briefly discussed. What is known of the rings of Uranus and of Jupiter's ring is summarized. Some of the dynamical processes and influences that are expected to be incorporated in more advanced theories of planetary rings are reviewed in detail, including radiation drag, plasma drag, interparticle collisions and viscosity, resonances with external satellites, shepherd satellites and moonlets. Finally, the orbital evolution of the shepherd satellites caused by the rings is estimated.
Flywheel energy storage devices comprising multilayered composite rotor systems are being studied extensively for utilization in the International Space Station. These composite material systems were investigated with a recently developed ultrasonic resonance spectroscopy technique. The ultrasonic system employs a continuous swept-sine waveform and performs a fast Fourier transform (FFT) on the frequency response spectrum. In addition, the system is capable of equalizing the amount of energy at each frequency. Equalization of the frequency spectrum, along with interpretation of the second FFT, aids in the evaluation of the fundamental frequency. The frequency responses from multilayered material samples, with and without known defects, were analyzed to assess the capabilities and limitations of this nondestructive evaluation technique for material characterization and defect detection. Amplitude and frequency changes were studied from ultrasonic responses of thick composite rings and a multiring composite rim. A composite ring varying in thickness was evaluated to investigate the full thickness resonance. The frequency response characteristics from naturally occurring voids in a composite ring were investigated. Ultrasonic responses were compared from regions with and without machined voids in a composite ring and a multiring composite rim. Finally, ultrasonic responses from the multiring composite rim were compared before and after proof spin testing to 63,000 rpm.
Our study of the Infrared Astronomy Satellite (IRAS) properties of ringed galaxies has been largely successful. We have identified what we think is the probable cause of the differences in the IRAS properties among non-interacting barred galaxies as the pattern speed of the bar. The key to identifying this parameter has been our focusing the study on outer-ringed galaxies where we know precisely what is present in the central regions (from available BVI CCD images in our library of images). The theory is that outer rings, through their morphology and other characteristics, can be identified with the outer Lindblad resonance, one of the major resonances in galaxy structure. Using a library of n-body simulations for comparison, we can reliably infer both low and high pattern speed galaxies from the appearance of outer rings and the existence of other ring features. It is clear that in some barred galaxies, the bar pattern speed is high enough to avoid an inner Lindblad resonance, hence such objects do not contain nuclear or circumnuclear star formation. The IRAS observations are most sensitive to nuclear star formation in early-type barred galaxies, and will thus select those barred galaxies where the pattern speed is low enough to allow an inner Lindblad resonance to exist. High pattern speed barred galaxies therefore weaken the correlation between bars and infrared excess. This finding helps to reconcile the inconsistent results found between different studies on the correlation between bars and far-IR emission.
Orbital resonances are defined as any system of two or more satellites (including planets) orbiting the same primary and whose orbital mean motions are in a ratio of small whole numbers. Known orbital resonances in the solar system are identified, including those involving Jupiter's satellites Io, Europa, and Ganymede; Saturn's satellites Mimas and Tethys, Enceladus and Dione, and Titan and Hyperion; Saturn's ring gaps and Mimas; various asteroids and Jupiter; and the planets Neptune and Pluto. The stability of orbital resonances is examined, the origin of orbital commensurabilities is investigated, and a simple model of the simplest kind of eccentricity-type resonance is outlined. A method is described by which tides carry a noncommensurate pair of satellites into a stable libration, and current ideas concerning the formation of the gaps in Saturn's rings and the asteroid belt are discussed. Various approaches to the analysis of orbital resonances are laid out and illustrated. Three two-body commensurabilities in Saturn's satellite system are analyzed numerically.
Using a similarity between morphologies of an optical planar waveguide and a whispering gallery resonator, we theoretically propose and experimentally demonstrate a one dimensional ring-like macroscopic object characterized with high finesse and small mode volume.
The mathematical model developed by Brown and Shook is used to explain the absence of asteroids in the Kirkwood gaps as well as the existence of some resonant asteroids with orbital periods commensurable to that of Jupiter. In addition, this model can possibly explain the biased number distributions at the commensurable positions of both resonant gaps and clusters. However, this resonant model is probably not applicable to the Saturnian ring system due to the possible cosmogonic plasma process during its formation.
In the Laboratory a high-T(sub c) one-hole squid was built from Y1Ba2Cu3O(7-x) ceramics obtained by a standard procedure of solid state reaction. The ceramics with critical current density J(sub c) is greater than 100 A/sq cm was selected. In the middle of 10 x 10 x 2 mm ceramics pellet a 0.8 mm hole was drilled in which superconducting loop of the squid was located. Between the hole and the edge of the pellet a cut was mechanically filed out with a bridge inside it connecting the superconducting ring. A scheme of the magnetometer is presented. The resonant frequency shift of the tank circuit, the connection of the squid with this circuit, and the squid inductance are evaluated. One of the most interesting fields of the squid-based magnetometer application is biomagnetism, particularly, the human heart magnetocardiogram measuring. The low-temperature squids were used in this area and many interesting and important scientific results have been obtained. The observations have shown that the main noise contribution was not due to the squid but to the Earth's magnetic field variations, industrial inductions, and mainly to the vibrations caused by liquid nitrogen boiling and by vibrations of the box. Further attempts are needed to reduce the magnetic noise inductions. Nevertheless, the estimations promise the maximum signal/noise relation of the high-T(sub c) squid-magnetocardiometer to be not less than 10:1 in a bandwidth of 60 Hz. Apparently, such resolution would be enough not only for steady cardiogram reading but even for thin structure investigation at average technique application.
In our laboratory of high-T(sub c), a one-hole squid was built from Y1Ba2Cu3O(7-x) ceramics obtained by a standard procedure of solid state reaction. The ceramics with critical current density J(sub c) is greater than 100 A/sq cm was selected. In the middle of a 10 x 10 x 2 mm ceramics pellet, a 0.8 mm hole was drilled in which the superconducting loop of the squid was located. Between the hole and the edge of the pellet, a cut was mechanically filed out with a bridge inside it connecting the superconducting ring. A scheme of the magnetometer is presented. The resonant frequency shift of the tank circuit, the connection of the squid with this circuit, and the squid inductance are evaluated. One of the most interesting fields of the squid-based magnetometer application is biomagnetism, particularly, the human heart magnetocardiogram measuring. The low-temperature squids were used in this area and many interesting and important scientific results have been obtained. The observations have shown that the main noise contribution was not due to the squid but to the Earth's magnetic field variations, industrial inductions, and mainly to the vibrations caused by liquid nitrogen boiling and by vibrations of the box. Further attempts are needed to reduce the magnetic noise inductions. Nevertheless, the estimations promise the maximum signal/noise relation of the high-T(sub c) squid-magnetocardiometer to be not less than 10:1 in a bandwidth of 60 Hz. Apparently, such resolution would be enough not only for steady cardiogram reading but even for thin structure investigation at average technique application.