Search NASA⌕ Search

SEARCH · Search NASA

Results for “rotational transform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Cosmic ray anisotropies at high energies

The directional anisotropies of the energetic cosmic ray gas due to the relative motion between the observers frame and the one where the relativistic gas can be assumed isotropic is analyzed. The radiation fluxes formula in the former frame must follow as the Lorentz invariance of dp/E, where p, E are the 4-vector momentum-energy components; dp is the 3-volume element in the momentum space. The anisotropic flux shows in such a case an amplitude, in a rotating earth, smaller than the experimental measurements from say, EAS-arrays for primary particle energies larger than 1.E(14) eV. Further, it is shown that two consecutive Lorentz transformations among three inertial frames exhibit the violation of dp/E invariance between the first and the third systems of reference, due to the Wigner rotation. A discussion of this result in the context of the experimental anisotropic fluxes and its current interpretation is given.

Martinic, N. J.↗
NASA NTRS1998

Spectroscopy of Chlorosyl Fluoride, FClO

FClO has been proposed as an intermediate in reactions involving ClF, Cl2O, and ClF3O, and it has been suggested as a molecule of atmospheric interest. It has been prepared in situ by the hydrolysis of ClF3. The pure rotational spectrum of FClO has been studied by conventional millimeter wave techniques and by microwave Fourier transform spectroscopy. Selected transitions were searched for using predictions based on an analysis of the nu(sub 1) band. FClO is an asymmetric prolate top, kappa = -0.8950 for F(35)ClO, with a rather small dipole component of 0.093 (4) D along the a-axis and a larger one of 1.93 (5) D along the b-axis. Transitions with 0 <= J <= 54 and 0 <= K(sub a) <= 18 were observed. Cl hyperfine splitting was generally observable throughout the spectrum with F-19 spin-rotation splitting observable as well in the microwave region. Structural parameters, harmonic force constants, and nuclear magnetic shielding parameters were derived and will be compared with data of related molecules, such as ClF3, ClF, FClO2, and FClO3. High resolution infrared spectra were taken in the regions of the FCl stretching mode and bending mode around 600 and 310/cm, respectively. A preliminary analysis indicates that the FCl stretch, near 596.86/cm for F(35)ClO, is in resonance with the dark overtone of delta near 617/cm. A brief progress report will be given.

Mueller, Holger S. P.↗
NASA NTRS1992

Recognizing Patterns In Log-Polar Coordinates

Log-Hough transform is basis of improved method for recognition of patterns - particularly, straight lines - in noisy images. Takes advantage of rotational and scale invariance of mapping from Cartesian to log-polar coordinates, and offers economy of representation and computation. Unification of iconic and Hough domains simplifies computations in recognition and eliminates erroneous quantization of slopes attributable to finite spacing of Cartesian coordinate grid of classical Hough transform. Equally efficient recognizing curves. Log-Hough transform more amenable to massively parallel computing architectures than traditional Cartesian Hough transform. "In-place" nature makes it possible to apply local pixel-neighborhood processing.

Weiman, Carl F. R.↗
NASA NTRS1993

Near-Threshold Rovibrational Excitation of HF by Electron Impact

The pronounced threshold peaks found in cross sections for electron-impact excitation of the vibrational levels of HF have been studied using an R-matrix method, in which electron exchange, correlation effects and polarization are included. Vibration is modelled inside the R-matrix sphere using the energy-modified adiabatic phase matrix method (EMAP). Rotation of the target molecule is treated outside the R-matrix sphere, using the frame transformation method. The external rovibronic close-coupling equations are solved by analytic methods. Analysis of the multichannel threshold structures indicates that the peaks found for rovibrational excitation of nu = 1 can be interpreted as virtual states while those for nu = 2 correspond to nuclear-excited Feshbach resonances. These two different results correspond simply to a change of sign of a small parameter that is determined by the threshold analysis. Whereas the overall shapes of the excitation peaks agree with earlier theoretical results, we have found detailed rotational fine structures for scattering energies on the order of the rotational constant above and below the opening of the vibrational channels. The partial and total cross sections for rovibrational state-to-state transitions in the energy region of the peaks are analysed. Characteristic cusp structures and excitation peaks are found at the rovibrational thresholds for transitions with small angular momentum transfer (Delta)j =0, 1 and 2. Differential cross sections are similar to recent measurements. These experimental data do not show the relatively sharp rise at the vibrational thresholds indicated by theory. Theory and experiment are in good agreement for the shape and magnitude of the angular dependence of cross sections for rovibrational state-to-state transitions, especially at larger energies.

Thummel, Helmar T.↗
NASA NTRS1982

Line positions and strengths of HDO in the 2400-3300 per cm region

The vibration-rotation spectrum of HDO in the 2400-3300 per cm region has been studied at 0.01 per cm resolution with a Fourier transform spectrometer. Values of the ground state levels and levels in the (100) and (020) states have been determined from the data. The ground state levels are fitted to a Watson-type Hamiltonian from which 17 rotational constants are obtained. Measurements of the strengths of over 1100 lines have been made using a nonlinear least-squares fitting technique, and 548 of these lines are analyzed to determine the band strengths, the coefficients of the F factors, and the Coriolis interaction parameters. The strengths of the A- and B-type (100) bands and the A- and B-type (020) bands are 53.2 + or - 0.9, 0.43 + or - 0.07, 6.00 + or - 0.54, and 2.75 + or - 0.12 per sq cm per atm at 296 K, respectively.

Toth, R. A.↗
NASA NTRS1985

The global response of stratospheric ozone to ultraviolet solar flux variations

The relation between rotational modulation of the ultraviolet solar irradiance and variations in atmospheric ozone has been investigated using Fourier transform harmonic analysis and cross-correlations. Ozone variations with the same period and phase as 13.5 day or 27-day solar flux variations occur at tropical and subtropical latitudes over a range of pressure levels centered about 3 mbar. The solar-forced oscillation is stronger in the summer hemisphere; as temperature-related variations would be stronger in winter. Changes in solar irradiance over the 11-year cycle can be estimated by scaling rotational modulation. Using this estimate and the ozone-sun relation obtained for rotational modulation yields solar cycle changes of 3.5 percent in 3 percent mixing ratio comparable to that predicted from halocarbons and 0.7 mbar in total ozone.

Heath, D. F.↗
NASA NTRS1983

A parallel architecture for digital filtering using Fermat number transforms

In this correspondence, a parallel architecture is developed to compute the linear convolution of two sequences of arbitrary lengths using the Fermat number transform (FNT). In particular, a pipeline structure is designed to compute a 128-point FNT. In this FNT, only additions and bit rotations are required. The overlap-save method is generalized for the FNT to realize a digital filter of arbitrary length. The generalized overlap-save method alleviates the usual dynamic range limitation of FNT's of long transform lengths. A parallel architecture is developed to realize this type of overlap-save method using one FNT and several inverse FNT's of 128 points. Its architecture is regular, simple, and flexible, and therefore naturally suitable for VLSI implementation.

Truong, T. K.↗
NASA NTRS1991

Formulation of full state feedback for infinite order structural systems

The estimation of exact displacement and displacement rate feedback kernels from finite dimensional control solutions based on finite element structural models is discussed. These kernels are then transformed to equivalent curvature and curvature rate feedback kernels. These curvature kernels are augmented with single point displacement and rotation feedback to account for rigid body motions. A growing class of sensors known as area-averaging sensors is used to measure the curvature and curvature rate state functions. The output of area-averaging sensors equals the convolution of all structural curvature states with the spatial sensitivity function of the sensors. Transforming the discrete feedback gains into continuous feedback kernels and employing area-averaging sensors make it possible to implement full state feedback for infinite order structural systems.

Miller, David W.↗
NASA NTRS1979

A fast, conservative algorithm for solving the transonic full-potential equation

A fast, fully implicit approximate factorization (AF) algorithm designed to solve the conservative transonic full-potential equation in either two or three dimensions is described. The algorithm uses an upwind bias of the density coefficient for stability in supersonic regions. This provides an effective upwind difference of the streamwise terms for any orientation of the velocity vector (i.e., 'rotated differencing'), and thereby greatly enhances the reliability of the present algorithm. A numerical transformation is used to establish an arbitrary body-fitted finite-difference mesh. Computed results for both airfoils and simplified wings demonstrate substantial improvement in convergence speed for the new algorithm relative to standard successive-line overrelaxation algorithms.

Holst, T. L.↗
NASA NTRS1983

Line positions and strengths in the /001/, /110/, and /030/ bands of HDO

A Fourier transform spectrometer of 0.01/cm resolution has been used to study the vibration-rotation spectrum of HDO in the 3250-4370/cm region, and a nonlinear least squares fitting technique has been employed in measurements of the strengths, positions and pressure-broadening parameters of over 1400 lines. In addition to determining values of both the ground state levels and levels in the (001), (110), and (030) states, an analysis is undertaken of the strengths of 953 lines in order to establish band strengths, F factor coefficients, and Fermi interaction parameters. Detailed results are presented in tabular form.

Toth, R. A.↗
NASA NTRS1941

Potential flow through centrifugal pumps and turbines

The methods of conformal transformation up to the present have been applied to the potential flows in the rotation of solid bodies only to a limited extent. This report deals with aspects of centrifugal pumps and turbines such as: the complex potential for rotation, potential for the flow due to the blade rotation, velocities at the blade tip, comparison with "infinite number of blades," and a variable number of blades.

Sorensen, E↗
NASA NTRS1998

An Alternative Lunar Ephemeris Model for On-Board Flight Software Use

In calculating the position vector of the Moon in on-board flight software, one often begins by using a series expansion to calculate the ecliptic latitude and longitude of the Moon, referred to the mean ecliptic and equinox of date. One then performs a reduction for precession, followed by a rotation of the position vector from the ecliptic plane to the equator, and a transformation from spherical to Cartesian coordinates before finally arriving at the desired result: equatorial J2000 Cartesian components of the lunar position vector. An alternative method is developed here in which the equatorial J2000 Cartesian components of the lunar position vector are calculated directly by a series expansion, saving valuable on-board computer resources.

Simpson, David G.↗
NASA NTRS1999

An Alternative Lunar Ephemeris Model for On-Board Flight Software Use

In calculating the position vector of the Moon in on-board flight software, one often begins by using a series expansion to calculate the ecliptic latitude and longitude of the Moon, referred to the mean ecliptic and equinox of date. One then performs a reduction for precession, followed by a rotation of the position vector from the ecliptic plane to the equator, and a transformation from spherical to Cartesian coordinates before finally arriving at the desired result: equatorial J2000 Cartesian components of the lunar position vector. An alternative method is developed here in which the equatorial J2000 Cartesian components of the lunar position vector are calculated directly by a series expansion, saving valuable onboard computer resources.

Simpson, David G.↗
NASA NTRS1975

Effects of low frequency vibration of a limb

Low frequency oscillations were applied on the ankle joint in plantarflexion/dorsiflexion rotation using a torque motor. The torque, the angular rotation and the evoked electromyogram from the gastronemius soleus and the anterior tibial muscles were recorded. Significant nonlinearities were observed in the angular rotation from 8 to 12 Hz. The following methods are used for data analysis: (1) Two cycle averaged response; (2) Fourier transform; and (3) Fourier analysis at the driving frequency. Important observations are: (1) resonance near 6 to 8 Hz; (2) slowly increasing amplitudes of oscillation near resonance; (3) self sustaining oscillations after the motor is turned off, particularly in the fatigued limb; and (4) distortion of angular rotation during which there are spontaneous recurrences of oscillation at the driving frequency.

Agarwal, G. C.↗
NASA NTRS1991

Measurements of self-broadening of infrared absorption lines of ozone

Lorentz self-broadening coefficients have been determined for 355 spectral lines belonging to five different infrared vibration-rotation bands of O3 in the spectral region from 4.8 to 17 microns. Six ozone absorption spectra, recorded at room temperature using a Fourier transform spectrometer, were analyzed. The half-width values were obtained through a nonlinear least-squares spectral fitting procedure. The results are compared with previous measurements, and the vibration of the half-widths with vibrational and rotational quantum numbers is examined.

Smith, M. A. H.↗
NASA NTRS1982

Automatic digital image registration

This paper introduces a general procedure for automatic registration of two images which may have translational, rotational, and scaling differences. This procedure involves (1) segmentation of the images, (2) isolation of dominant objects from the images, (3) determination of corresponding objects in the two images, and (4) estimation of transformation parameters using the center of gravities of objects as control points. An example is given which uses this technique to register two images which have translational, rotational, and scaling differences.

Goshtasby, A.↗
NASA NTRS1973

Orientation of the moon by numerical integration

The differential equations of rotational motion of the moon are solved by numerical integration methods. Euler's dynamical equations transformed to a convenient form are treated by techniques analogous to ordinary orbit determination procedures. The proposed method is fully consistent with the ephemeris of the moon and can utilize a variety of observational material for the solution of the selected parameters. Examples are given of comparison between the proposed method and Eckhardt's 1970 model of the physical librations of the moon. The merits of the new method are discussed in the light of conventional data sources like earth-based or satellite-based photography as well as newly available data types like laser ranging to retroreflectors on the moon.

Papo, H. B.↗
NASA NTRS1980

Far infrared measurement of stratospheric HCl

Thermal emission from three rotational lines of H(Cl-35) and H(Cl-37) was observed with a Fourier transform spectrometer from a balloon platform at 28.9 km. The measured HCl line-of-sight density at 1.9 deg elevation above 28.9 km is 4.7 + or - 1.3 x 10 to the 15th/sq cm, implying an average volume mixing ratio of 0.8 + or - 0.2 x 10 to the -9th at the mean sampling altitude of 32.5 km. For a uniform mixing ratio model, this corresponds to a vertical column density of 2.4 + or - 0.6 x 10 to the 14th/sq cm. This result is in reasonable agreement with near infrared spectroscopic determinations and an abundance from a chemical sampling technique of HCl at this altitude; a pressure modulator radiometer measurement yields a significantly higher amount of HCl.

Chance, K. V.↗