Search NASA⌕ Search

SEARCH · Search NASA

Results for “sites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Microwave radiometer experiment of soil moisture sensing at BARC test site during summer 1981

Soil moisture was measured by truck mounted microwave radiometers at the frequencies of 1.4 GHz, 5 GHz, and 10.7 GHz. The soil textures in the two test sites were different so that the soil type effect of microwave radiometric response could be studied. Several fields in each test site were prepared with different surface roughnesses and vegetation covers. Ground truth on the soil moisture, temperature, and the biomass of the vegetation was acquired in support of the microwave radiometric measurements. Soil bulk density for each of the fields in both test sites was sampled. The soils in both sites were measured mechanically and chemically. A tabulation of the measured data is presented and the sensors and operational problems associated with the measurements are discussed.

Wang, J.↗

Mars landing sites

An intensive effort has been underway for the past two years to study possible landing sites for a future Mars rover and returned-sample mission. The task has been to identify and study nine sites, each of which is near a variety of representative geologic units. The choice of sites is independent of future decisions as to whether the rovers will be manned or unmanned, except that unmanned rover traverses may be shorter and more restricted. North and south polar locations, the Grand canyon that exposes layered terrain, two stream channels, two volcanic centers, and two upland sites are under consideration.

Masursky, H.↗

Selection of the Apollo 15 landing site

Telescopic studies in the early 1960's pinpointed the future Apollo 15 landing site as a potential exploration site because it included one of the largest lunar sinuous rilles, Rima Hadley, and some of the highest mountains, Montes Apenninus. Additional targets were identified once Apennine-Hadley emerged as a potential landing site. Site selection processes were discussed.

Wilhelms, D. E.↗

The search for the site of the r-process

A number of sites have been suggested for the r-process, including neutronized cores of exploding supernovae, jets of neutronized matter ejected from the collapse of rotating magnetized stellar cores, the helium and carbon zones of stars undergoing supernova explosions, and helium core flashes in low-mass stars. Despite much work and many advances in nuclear physics, the site or sites of the r-process is still unknown. Observations of metal-poor stars in the halo of the Galaxy indicate r-process production early in the history of the Galaxy and provide important constraints on galactic nucleosynthesis. Further observations of metal-poor stars, along with advances in understanding the nuclear properties of neutron-rich nuclei and improved astrophysical models of stars in the late stages of evolution, should help to identify the site of the r-process.

Cowan, John J.↗

Mining for helium: Site selection and evaluation

Part of the University of Wisconsin study of the feasibility of recovering He-3 from the moon is selection and evaluation of potential mining sites. Selection and evaluation are based primarily on salient findings by investigators: (1) Regoliths from areas underlain by highland materials contain less than 20 wppm He; (2) Regoliths of certain maria or parts of maria also contain less than 20 wppm He, but mare regoliths at the Apollo 11 and 17 sites contain 25 to 49 wppm He; (3) The helium content of a regolith is a function of its composition; and (4) Helium is concentrated in the -50 micron size fractions of regoliths. In site selection, the concern is with the compositions of lunar regoliths, in particular with their titanium contents. It is widely accepted that compositions of mare regoliths are controlled by the nature of the underlying basalts from which the regoliths are largely derived. The distribution and extent of the three groups of basalts and the regoliths derived from them are the first basis for site selection and evaluation. Other considerations are briefly discussed.

Cameron, Eugene N.↗

Preliminary analysis of Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) for mineralogic mapping at sites in Nevada and Colorado

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data for sites in Nevada and Colorado were evaluated to determine their utility for mineralogical mapping in support of geologic investigations. Equal energy normalization is commonly used with imaging spectrometer data to reduce albedo effects. Spectra, profiles, and stacked, color-coded spectra were extracted from the AVIRIS data using an interactive analysis program (QLook) and these derivative data were compared to Airborne Imaging Spectrometer (AIS) results, field and laboratory spectra, and geologic maps. A feature extraction algorithm was used to extract and characterize absorption features from AVIRIS and laboratory spectra, allowing direct comparison of the position and shape of absorption features. Both muscovite and carbonate spectra were identified in the Nevada AVIRIS data by comparison with laboratory and AIS spectra, and an image was made that showed the distribution of these minerals for the entire site. Additional, distinctive spectra were located for an unknown mineral. For the two Colorado sites, the signal-to-noise problem was significantly worse and attempts to extract meaningful spectra were unsuccessful. Problems with the Colorado AVIRIS data were accentuated by the IAR reflectance technique because of moderate vegetation cover. Improved signal-to-noise and alternative calibration procedures will be required to produce satisfactory reflectance spectra from these data. Although the AVIRIS data were useful for mapping strong mineral absorption features and producing mineral maps at the Nevada site, it is clear that significant improvements to the instrument performance are required before AVIRIS will be an operational instrument.

Kruse, Fred A.↗

Environmental projects, volume 11. Environmental assessment: Addition to operations building, Mars site

An Environmental Assessment was performed of the proposed addition to building G-86 at the Mars Site, which will provide space for new electronic equipment to consolidate the Deep Space Network (DSN) support facilities from other Goldstone Deep Space Communication Complex (GDSCC) sites at the Mars Site, and will include a fifth telemetry and command group with its associated link monitor, control processor, and operator consoles. The addition of these facilities will increase the capability of the DSN to support future sophisticated NASA spacecraft missions such as the International Solar and Terrestrial Physics (ISTP) Program. The planned construction of this building addition requires an Environmental Assessment (EA) document that records the existing environmental conditions at the Mars Site, that analyzes the environmental effects that possibly could be expected from the construction and use of the new building addition, and that recommends measures to be taken to mitigate any possible deleterious environmental effects.

Source record↗

Site comparison for optical visibility statistics in southern Arizona

One of the best locations in the continental United States for astronomical telescopes is southern Arizona. The mountains surrounding Tucson have clear skies 80 percent of the year, with image quality generally better than 2 seconds on peaks. Two of the existing observatory sites in this area are being considered as locations for one of the three Atmospheric Visibility Monitoring (AVM) observatories. These sites are Mount Lemmon and Mount Hopkins. A comparison of the characteristics of each of the sites is made here to identify the more desirable of the two locations. It is recommended that Mount Lemmon be selected as the Arizona site for this project.

Cowles, K. A.↗

Site-certification imaging sensor for the exploration of Mars

A 'time dilation' push-broom imaging CCD sensor is being considered for certification of landing and roving sites for the exploration of Mars. It will be used to certify several 10 x 10 km candidate sites and to identify rocks and holes of 1 m or larger at those sites, using an optical sensor with 0.25 m resolution. This will require a high-resolution large-aperture camera and a camera-pointing system designed for high accuracy and stability. To reduce the data rate and increase the exposure time, the imaging time will be stretched out by a factor of eight over the time required to fly directly over the imaged site. Six parallel data storage strings will be used to reduce the data acquisition rate, allowing each string to process a manageable 25 Mb/s.

Scholl, M. S.↗

Diurnal HO2 cycles at clean air and urban sites in the troposphere

HO2 concentrations at two Oregon sites were determined for continuous periods of 36 to 48 hours, using fluorescence assay with gas expansion. At the sea level coastal site, NNW winds prevailed during daytime, and a point measurement of very low total nonmethane hydrocarbon concentration indicated the presence of remote tropospheric air of oceanic origin. At the urban site, HO2 was determined during moderately low ozone pollution levels. At both sites, maximum daily (HO2) was in the range of 1-2 x 10 exp 8/cu cm under clear-sky conditions, with an estimated overall uncertainty of 40 percent. HO2 was detected by continuous low-pressure sampling with flowing chemical conversion to HO, which was detected by laser-excited fluorescence. The instrumental response to HO2 was calibrated by the self-decay of HO2 at atmospheric pressure. Interference in the measured daytime HO2 concentrations by RO2 was estimated at less than 20 percent.

Hard, T. M.↗

Lunar Observer Laser Altimeter observations for lunar base site selection

One of the critical datasets for optimal selection of future lunar landing sites is local- to regional-scale topography. Lunar base site selection will require such data for both engineering and scientific operations purposes. The Lunar Geoscience Orbiter or Lunar Observer is the ideal precursory science mission from which to obtain this required information. We suggest that a simple laser altimeter instrument could be employed to measure local-scale slopes, heights, and depths of lunar surface features important to lunar base planning and design. For this reason, we have designed and are currently constructing a breadboard of a Lunar Observer Laser Altimeter (LOLA) instrument capable of acquiring contiguous-footprint topographic profiles with both 30-m and 300-m along-track resolution. This instrument meets all the severe weight, power, size, and data rate limitations imposed by Observer-class spacecraft. In addition, LOLA would be capable of measuring the within-footprint vertical roughness of the lunar surface, and the 1.06-micron relative surface reflectivity at normal incidence. We have used airborne laser altimeter data for a few representative lunar analog landforms to simulate and analyze LOLA performance in a 100-km lunar orbit. We demonstrate that this system in its highest resolution mode (30-m diameter footprints) would quantify the topography of all but the very smallest lunar landforms. At its global mapping resolution (300-m diameter footprints), LOLA would establish the topographic context for lunar landing site selection by providing the basis for constructing a 1-2 km spatial resolution global, geodetic topographic grid that would contain a high density of observations (e.g., approximately 1000 observations per each 1 deg by 1 deg cell at the lunar equator). The high spatial and vertical resolution measurements made with a LOLA-class instrument on a precursory Lunar Observer would be highly synergistic with high-resolution imaging datasets, and will allow for direct quantification of critical slopes, heights, and depths of features visible in images of potential lunar base sites.

Garvin, James B.↗

Comparison of surface fluxes and conductances at two contrasting sites within the FIFE area

Surface flux measurements from two contrasting sites within the FIFE study area are analyzed. The seasonal variation of midday latent heat fluxes and surface conductances at the two sites was found to be very similar even though the ratio of their average total leaf area indices was greater than two to one. Concurrent measurements made at another six flat sites within the FIFE area confirmed the independence of latent heat flux with respect to leaf area index. The surface conductance stress function related to specific humidity deficit was the same for the two sites, whereas the solar radiation stress function showed a difference of 30 percent at a solar radiation input of 300 W/sq m and the soil moisture stress function showed a difference of 16 percent when half the extractable soil moisture had been taken up. However, when the stress functions were combined to determine the surface conductance, these differences virtually canceled out.

Stewart, J. B.↗

Variation in energy balance components from six sites in a native prairie for three years

Six automatic stations were used to evaluate the surface energy and radiation balances on a native prairie near Manhattan, Kansas, using the Bowen ratio technique for a total of 300 days. Data were taken during the periods from May 26 to October 16, 1987, May 10 to September 18, 1988, and July 21 to August 13, 1989. The station site locations were selected to represent burned and unburned treatments on ridges, valley bottoms, and slopes with various aspects. The measured variables were (1) air and wet bulb temperatures at two heights, (2) net radiation, (3) solar radiation (up and down), (4) total hemispherical radiation (up and down), (5) diffuse radiation, (6) soil heat flow and soil temperature, (7) wind speed, (8) wind direction, and (9) precipitation. Energy balance components at the sites were compared for the 3 years. The variation between sites and years was small, even though some sites were as much as 10 km apart and the years had different rainfall amounts. The average values for the four summer intensive field campaigns (IFCs) were as follows: albedo, 0.2; ratio of net radiation to solar radiation, 62 percent; evaporation equivalent, 4 mm/d; Bowen ratio, 0.32; evaporation fraction, 70 percent; and the ratio of evaporation to solar energy, 40 percent. These values were different for the fall IFC. The latent and sensible heat fluxes were more variable than the radiation terms reflecting soil moisture differences between IFCs.

Fritschen, Leo J.↗

Multispectral, multialtitude observations of the KUREX-91 experiment site from a helicopter platform

An eight-channel modular multiband radiometer, a 252-channel SE-590 spectroradiometer, and a single-channel infrared thermometer were mounted in a nadir-looking attitude on a Soviet MI-8 helicopter to collect visible, infrared, and thermal measurements of the KUREX-91 study area. These measurements were coincident with surface, other airborne, and spaceborne measurements collected during the July 1991 field campaign. The helicopter missions included both hovers and slow-flight transects over specific sites. Multiple altitude flights over several of the study sites were also made. Study sites included grasslands, forest stands, and agricultural fields. Data collection was executed so that observations from the multispectral devices could be compared with multispectral and biophysical observations made on the surface as well as with multispectral observations from other airborne and spaceborne systems. A preliminary analysis of multispectral and multialtitude data of several study sites is presented.

Walthall, Charles L.↗

Environmental projects. Volume 15: Environmental assessment: Proposed 1-megawatt radar transmitter at the Mars site

The Goldstone Deep Space Communications Complex (GDSCC), located in the Mojave Desert about 64.5 km (40 mi) north of Barstow, California. and about 258 km (160 mi) northeast of Pasadena, California, is part of the National Aeronautics and Space Administration's (NASA's) Deep Space Network (DSN), one of the world's larger and more sensitive scientific telecommunications and radio navigation networks. The Goldstone Complex is managed, technically directed, and operated for NASA by the Jet Propulsion Laboratory (JPL) of the California Institute of Technology in Pasadena, California. Activities at the GDSCC support the operation of six parabolic dish antennas located at five separate sites called Deep Space Stations (DSS's). Four sites, named Echo, Mars, Uranus, and Apollo, are operational for space missions, while the remaining Venus Site is devoted to research and development activities. The Mars Site at the GDSCC contains two antennas: the Uranus antenna (DSS 15, 34 m) and the Mars antenna (DSS 14, 70 m). This present volume deals solely with the DSS-14 Mars antenna. The Mars antenna not only can act as a sensitive receiver to detect signals from spacecraft, but it also can be used in radar astronomy as a powerful transmitter to send out signals to probe the solar system. At present, the Mars antenna operates as a continuous-wave microwave system at a frequency of 8.51 GHz at a power level of 0.5 MW. JPL has plans to upgrade the Mars antenna to a power level of 1 MW. Because of the anticipated increase in the ambient levels of radio frequency radiation (RFR), JPL retained Battelle Pacific Northwest Laboratories (BPNL), Richland, Washington, to conduct an environmental assessment with respect to this increased RFR. This present volume is a JPL-expanded version of the BPNL report titled Environmental Assessment of the Goldstone Solar System Radar, which was submitted to JPL in Nov. 1991. This BPNL report concluded that the operation of the upgraded Mars antenna at the GDSCC, with its increased potential electromagnetic radiation hazards and interferences, would have no significantly adverse biological, physical, or socioeconomic effects on the environment. Thus, a Finding of No Significant Impact (FONSI) is appropriate in accordance with local, State, Federal, and NASA environmental rules and regulations.

Source record↗

Geology and radiophysical properties of the Venera and Vega landing sites

Geologic maps for all seven Venera and Vega landing sites have been produced. Because the radius of error for each landing site is 150 km, the entire landing circle has been mapped centered about the estimated landing point. Correlations were found between the Magellan imagery and the lander TV panoramas and geochemical measurements made at the landing site. Radiophysical properties, including backscatter cross-sections, altimetry, emissivity, and rms slopes, were determined for each landing circle. After mapping the geology of the landing circles, the regional geology of the seven sites was mapped and the geologic history of theses large regions was determined.

Weitz, C. M.↗

Potential landing sites for Mars Pathfinder

In addition to a better understanding of the geological evolution of Mars, new techniques for processing available data have emerged, new data have been acquired, and the engineering approaches for placing spacecraft on the surface have evolved. Selection of the Mars Pathfinder landing site must take these issues into account, along with mission constraints. An advantage of Mars Pathfinder is the rover for sampling surface materials over a range of tens of meters. However, engineering constraints and the limited scientific payload of this mission require new approaches for landing site selection. One approach is to select sites exhibiting a wide variety of rocks near the lander. An alternative approach is to select sites in which the regional geology consists of a single rock type representing a key datum for the geological study of Mars, and is uniformly distributed within the landing ellipse.

Kuzmin, Ruslan O.↗

The Global Oscillation Network Group site survey. 1: Data collection and analysis methods

The Global Oscillation Network Group (GONG) Project is planning to place a set of instruments around the world to observe solar oscillations as continuously as possible for at least three years. The Project has now chosen the sites that will comprise the network. This paper describes the methods of data collection and analysis that were used to make this decision. Solar irradiance data were collected with a one-minute cadence at fifteen sites around the world and analyzed to produce statistics of cloud cover, atmospheric extinction, and transparency power spectra at the individual sites. Nearly 200 reasonable six-site networks were assembled from the individual stations, and a set of statistical measures of the performance of the networks was analyzed using a principal component analysis. An accompanying paper presents the results of the survey.

Hill, Frank↗