Search NASA⌕ Search

SEARCH · Search NASA

Results for “size exclusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Sulphur variations in annually layered stalagmites using benchtop micro-XRF

Variation of sulphur in annually laminated stalagmites can be used to infer the impact of past volcanic activities, anthropogenic pollution, and climate change due to increased bushfire activity. The synchrotron radiation micro-X-Ray fluorescence (SR-XRF) microprobe is a powerful tool to analyse and image sulphur recorded in stalagmites with micrometre resolution. However, access to SR-XRF beamlines can be limited, so researchers must select the most promising stalagmites for imaging. Benchtop micro-XRF is an effective tool for trace elemental analysis of speleothem samples and is a candidate for routine laboratory measurement of sulphur along stalagmite laminae and screening for SR-XRF. Here, this study describes a protocol using matrix-matched standards to measure annual variations of sulphur at trace to percent level along the laminae of two Western Australian stalagmites, one of which already having been analysed using SR-XRF. Parameters that affected quantitation include X-ray tube voltage and current, spot size of the X-ray beam and stalagmite surface roughness and porosity. The use of a 20 μm X-ray spot size provides sub-annual spatial resolution that can be completed in an overnight scan. The features in a 1000 point micro-XRF analysis of sulphur along a 20 mm transect show good consistency with SR-XRF microprobe data. Micro-XRF mapping was also performed to produce chemical images on the stalagmite and compared with Raman and X-ray diffraction (XRD) to confirm that the stalagmite is exclusively calcite, with no aragonite, and that the source of sulphur in the samples was gypsum and anhydrite. Regions of very high sulphur in the micro-XRF maps were found to be artefacts due to diffraction of the incident beam but these could be efficiently removed by using a multiple point statistics approach to produce a clean image suitable for analysis of the laminae. This work shows the potential of micro-XRF for routine analysis of sulphur in stalagmites, and to streamline sample characterisation before SR-XRF imaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fission gas trapped in Chornobyl fuel microparticles reveals details of reactor operations

The isotopic ratios of fission gas would provide important source information of a nuclear fuel sample found in the environment. However, it is believed that during a reactor accident like Chornobyl all fission gas is lost and that the radioactive particles found in the Chornobyl Exclusion Zone today are depleted in gases by the initial explosion and subsequent fire. We disprove this hypothesis by detection and analysis of trapped krypton and xenon in these particles. Our analysis of krypton and xenon isotopes by noble gas mass spectroscopy in combination with resonance ionization mass spectrometry establishes that important information about reactor operations like age, neutron flux and plutonium fission fraction can still be reconstructed from individual micrometer-sized particles even after decades of weathering in the environment.

Chornobyl↗
DOE OSTI2025

Finite-size effects on small- x evolution and saturation in proton and nuclear targets

Within the color glass condensate effective field theory, we assess the importance of including a finite size for the target on observables sensitive to small- x evolution. To this end, we study the Balitsky-Kovchegov (BK) equation with impact-parameter dependence in the initial condition. We demonstrate that neglecting the dependence on the impact parameter can result in overestimated saturation effects for protons, while it has little effect for heavy nuclei at the energies available at current experiments. When fixing the nonperturbative parameters to the energy dependence of the exclusive J / ψ photoproduction cross section with proton targets, predictions for lead targets are not sensitive to the applied running-coupling prescription, the scheme chosen to resum large transverse logarithms in the BK equation, or the infrared regulator in the evolution. Published by the American Physical Society 2025

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Carbon Anode Material from Biomass Pyrolysis Oil

Lithium-ion batteries (LIB) are an important component of electric vehicles and sodium-ion batteries (SIB) are an attractive alternative for grid electric storage. We are investigating a novel approach to synthesizing the carbon anode materials for these batteries from biomass pyrolysis oil as part of conversion processes to produce biofuels. Graphite is used as anode material in LIB and is exclusively produced from petroleum residue or mined mineral carbon. We have synthesized drop-in graphite by coking the heavy residual oil from the distillation of catalytic fast pyrolysis oil and by catalytic graphitizing raw pyrolysis oil. XRD and Raman spectroscopies were used to verify the production of high purity crystalline graphite. Figure 1 shows typical XRD spectra of the bio-graphite compared to commercial material as well as the charge/discharge cycle. Graphite particle sizes and morphologies were adjusted to improve performance using jet milling and carbon coating. The bio-graphite delivered a high capacity (335 mAh/g) when tested in a graphite half-cell. Full cell coin cell experiments were also conducted to verify the observations from half-cell testing. The high value of graphite (>$9/kg) can positively impact the economics of biofuels production and can be an important part of a future circular carbon economy. We have also investigated synthesizing hard carbon from pyrolysis oil for use as anode material in SIB. These batteries are not commercially mature but have great promise in grid storage and use earth abundant elements. We have demonstrated that pyrolysis oil can be used to synthesize hard carbon, which was subsequently be used in SIB experiments. This material achieved a sodium-ion capacity of 250 mAh/g and a first cycle efficiency of 78%, with opportunities to further optimize this performance from optimizing the composition of the pyrolysis oil to shaping the hard carbon particles. As with graphite, hard carbon is a high value (> $10/kg) material that could facilitate biofuels production.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2023

Critical Roles of Chalcogenide Anion on Strengthening Stability of Ni 2 Mo 6 Te 8 for Almost Exclusive Electrocatalysts Nitrate to Ammonia Conversion

Electrochemical hydrogenation of nitrate to ammonia using renewable electricity is a promising route for sustainability but lacks catalysts that can deliver balanced selectivity, activity, and durability. For this work, a new family of noble metal-free and high-performing Chevrel phase Ni 2 Mo 6 T 8 (T = S, Se, and Te) catalysts that have similar structural and textural properties and differ presumably only in chalcogenide anion is systematically studied. The side-by-side comparisons allow the uncovering of the critical roles of chalcogenide anions in impacting kinetic activities and long-term durability. The incorporation of anions with larger size and smaller electronegativity from sulfide to selenide and telluride invokes stronger inhibition of the otherwise competing hydrogen evolution reaction (HER) and steers the hydrogenation toward the selective formation of ammonia, thus improving both Faradic selectivity and the turnover frequency to high levels of 99.4% and 21.5 s –1 , respectively, on the Ni 2 Mo 6 Te 8 catalyst. More significantly, the bulkier anion in the Ni 2 Mo 6 T 8 catalyst kinetically inhibited the intercalation of electrolyte cations, a major degradation mechanism in the catalyst family examined here and delivered several times improved durability. Therefore, this study introduces novel active motifs for selective nitrate reduction and provides insights into the catalyst degradation mechanism and practical ways to improve durability.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Draft genome sequences of strains CBS6241 and CBS6242 of the basidiomycetous yeast Filobasidium floriforme

The Tremellomycetes are a species-rich group within the basidiomycete fungi; however, most analyses of this group to date have focused on pathogenic Cryptococcus species within the order Tremellales. Recent genome-assisted studies of other Tremellomycetes have identified interesting features with respect to biotechnological applications as well as the evolution of genes involved in mating and sexual development. Here, we report genome sequences of two strains of Filobasidium floriforme, a species from the order Filobasidiales, which branches basally to the Tremellales, Trichosporonales, and Holtermanniales. The assembled genomes of strains CBS6241 and CBS6242 are 27.4 Mb and 26.4 Mb in size, respectively, with 8314 and 7695 predicted protein-coding genes. Overall sequence identity at nucleic acid level between the strains is 97%. Among the predicted genes are pheromone precursor and pheromone receptor genes as well as two genes encoding homedomain (HD) transcription factors, which are predicted to be part of the mating type (MAT) locus. Sequence analysis indicates that CBS6241 and CBS6242 carry different alleles for both the pheromone/receptor genes as well as the HD transcription factors. Orthology inference identified 1482 orthogroups exclusively found in F. floriforme, some of which were involved in carbohydrate transport and metabolism. Subsequent CAZyme repertoire characterization identified 267 and 247 enzymes for CBS6241 and CBS6242, respectively, the second highest number of CAZymes among the analyzed Tremellomycete species. In addition, F. floriforme contains five CAZymes absent in other species and several plant-cell-wall degrading CAZymes with the highest copy number in Tremellomycota, indicating the biotechnological potential of this species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Phylogenomic insights into the taxonomy, ecology, and mating systems of the lorchel family Discinaceae (Pezizales, Ascomycota)

Lorchels, also known as false morels (Gyromitra sensu lato), are iconic due to their brain-shaped mushrooms and production of gyromitrin, a deadly mycotoxin. Molecular phylogenetic studies have hitherto failed to resolve deep-branching relationships in the lorchel family, Discinaceae, hampering our ability to settle longstanding taxonomic debates and to reconstruct the evolution of toxin production. We generated 75 draft genomes from cultures and ascomata (some collected as early as 1960), conducted phylogenomic analyses using 1542 single-copy orthologs to infer the early evolutionary history of lorchels, and identified genomic signatures of trophic mode and mating-type loci to better understand lorchel ecology and reproductive biology. Our phylogenomic tree was supported by high gene tree concordance, facilitating taxonomic revisions in Discinaceae. We recognized 10 genera across two tribes: tribe Discineae (Discina, Maublancomyces, Neogyromitra, Piscidiscina, and Pseudodiscina) and tribe Gyromitreae (Gyromitra, Hydnotrya, Paragyromitra, Pseudorhizina, and Pseudoverpa); Piscidiscina was newly erected and 26 new combinations were formalized. Paradiscina melaleuca and Marcelleina donadinii formed their own family-level clade sister to Morchellaceae, which merits further taxonomic study. Genome size and CAZyme content were consistent with a mycorrhizal lifestyle for the truffle species (Hydnotrya spp.), whereas the other Discinaceae genera possessed genomic properties of a saprotrophic habit. Lorchels were found to be predominantly heterothallic-either MAT1-1 or MAT1-2-but a single occurrence of colocalized mating-type idiomorphs indicative of homothallism was observed in Gyromitra esculenta strain CBS101906 and requires additional confirmation and follow-up study. Lastly, we confirmed that gyromitrin has a phylogenetically discontinuous distribution, having been detected exclusively in two distantly related genera (Gyromitra and Piscidiscina) belonging to separate tribes. Our genomic dataset will facilitate further investigations into the gyromitrin biosynthesis genes and their evolutionary history. With additional sampling of Geomoriaceae and Helvellaceae-two closely related families with no publicly available genomes-these data will enable comprehensive studies on the independent evolution of truffles and ecological diversification in an economically important group of pezizalean fungi.

Dirks, Alden C↗
DOE OSTI2021

A deterministic verification strategy for electrostatic particle-in-cell algorithms in arbitrary spatial dimensions using the method of manufactured solutions

As simulations of kinetic plasmas continue to increase in scope and complexity, a rigorous and straightforward method for verifying particle-in-cell (PIC) implementations is necessary to ensure their correctness. Here, in this paper, we present a deterministic method for the rigorous verification of multidimensional, multispecies, electrostatic particle-in-cell codes based on the method of manufactured solutions. Specifically, we prove that rigorous verification is possible through the exclusive examination of errors of grid quantities (i.e., moments and/or fields), allowing for a very light-weight and non-intrusive implementation in existing PIC codes. This is a marked improvement over earlier PIC verification approaches (only demonstrated with one species in 1D-1V), which rely on the comparison of cumulative distribution functions, and are invasive on the code base, introduce additional stochastic noise, are significantly more computationally expensive, and lack rigorous convergence properties. Interestingly, we show that different grid quantities feature different rates of convergence with the number of particles and mesh size, impacting the verification process. These theoretical results are confirmed numerically with a multi-species 2D-2V particle-in-cell code, including the ability of the method to detect order reduction due to an incorrect implementation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Surface distribution of heterogenous clathrin assemblies in resorbing osteoclasts

Highlights: • Platinum replica microscopy has revealed new structural data on the clathrins on the ventralmembrane of osteoclasts. • Various clathrins were visualized, suggesting that they followed variations in the surface topography of the apatite. • Most of the flat clathrins may participate in the adhesive and mechnosensory functions in co-operation with podosomes. • The present findings in osteoclast biology reveal potential novel drug targets or treatment regimens. Osteoclasts seeded on either glass coverslips or apatite pellets have at least two morphologically distinct substrate adhesion sites: actin-based adhesion structures including podosome belts and sealing zones, and adjacent clathrin sheets. Clathrin-coated structures are exclusively localized at the podosome belts and sealing zone, in both of which the plasma membrane forms a tight attachment to the substrate surface. When cultured on apatite osteoclasts can degrade the apatite leading to the formation of resorption lacunae. The sealing zone divides the ventral membrane into different domains, outside and inside of the sealing zones. The former facing the smooth-surfaced intact apatite contains relatively solitary or networks of larger flat clathrin structures; and the latter, facing the rough-surfaced degraded apatite in the resorption lacunae contain clathrin in various shapes and sizes. Clathrin assemblies on the membrane domain facing not only a resorption lacuna, or trails but also intact apatite indeed were observed to be heterogeneous in size and intensity, suggesting that they appeared to follow variations in the surface topography of the apatite surface. These results provide a detailed insight into the flat clathrin sheets that have been suggested to be the sites of adhesion and mechanosensing in co-operation with podosomes.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Degeneracy in Intercalated Pb Phases under Buffer-Layer Graphene on SiC(0001) and Diffuse Moiré Spots in Surface Diffraction

First-principles density functional theory (DFT) is used to analyze the stability of Pb intercalated phases under buffer layer graphene on SiC(0001) as a function of the supercell size, Pb coverage, and degree of Pb ordering. By comparing the chemical potentials of such two-dimensional Pb structures, here we find that there is a family of structurally distinct thermodynamically preferred Pb subsurface configurations with minute stability differences. These differences are comparable to the thermal energies at about 450 °C, where the Pb intercalated phases are grown. High-resolution surface-diffraction experiments using Spot Profile Analysis Low-Energy Electron Diffraction (SPA-LEED) confirm this high degree of degeneracy of the Pb intercalated phases from broad, low-intensity moiré spots observed exclusively from intercalated Pb. The low intensity of the moiré spots implies the coexistence of structurally different subsurface Pb phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Efficient Monte Carlo event generation for neutrino-nucleus exclusive cross sections

Modern neutrino-nucleus cross section computations need to incorporate sophisticated nuclear models to achieve greater predictive precision. However, the computational complexity of these advanced models often limits their practicality for experimental analyses. To address this challenge, we introduce a new Monte Carlo method utilizing normalizing flows to generate surrogate cross sections that closely approximate those of the original model while significantly reducing computational overhead. As a case study, we built a Monte Carlo event generator for the neutrino-nucleus cross section model developed by the Ghent group. This model employs a Hartree-Fock procedure to establish a quantum mechanical framework in which both the bound and scattering nucleon states are solutions to the mean-field nuclear potential. The surrogate cross sections generated by our method demonstrate excellent accuracy with a relative effective sample size of more than 98.4%, providing a computationally efficient alternative to traditional Monte Carlo sampling methods for differential cross sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Metabolic skinflint or spendthrift? Insights into ground sloth integument and thermophysiology revealed by biophysical modeling and clumped isotope paleothermometry

Abstract Remains of megatheres have been known since the 18th -century and were among the first megafaunal vertebrates to be studied. While several examples of preserved integument show a thick coverage of fur for smaller ground sloths living in cold climates such as Mylodon and Nothrotheriops , comparatively very little is known about megathere skin. Assuming a typical placental mammal metabolism, it was previously hypothesized that megatheres would have had little-to-no fur as they achieved giant body sizes. Here the “hairless model of integument” is tested using geochemical analyses to estimate body temperature to generate novel models of ground sloth metabolism, fur coverage, and paleoclimate with Niche Mapper software. The simulations assuming metabolic activity akin to those of modern xenarthrans suggest that sparse fur coverage would have resulted in cold stress across most latitudinal ranges inhabited by extinct ground sloths. Specifically, Eremotherium predominantly required dense 10 mm fur with implications for seasonal changes of coat depth in northernmost latitudes and sparse fur in the tropics; Megatherium required dense 30 mm fur year-round in its exclusive range of cooler, drier climates; Mylodon and Nothrotheriops required dense 10–50 mm fur to avoid thermal stress, matching the integument remains of both genera, and further implying the use of behavioral thermoregulation. Moreover, clumped isotope paleothermometry data from the preserved teeth of four genera of ground sloth yielded reconstructed body temperatures lower than those previously reported for large terrestrial mammals (29 ± 2°–32 ± 3° C). This combination of low metabolisms and thick fur allowed ground sloths to inhabit various environments.

Deak, Michael D.↗
DOE OSTI2023

Merger identification through photometric bands, colours, and their errors

Aims. We present the application of a fully connected neural network (NN) for galaxy merger identification using exclusively photometric information. Our purpose is not only to test the method’s efficiency, but also to understand what merger properties the NN can learn and what their physical interpretation is. Methods. We created a class-balanced training dataset of 5860 galaxies split into mergers and non-mergers. The galaxy observations came from SDSS DR6 and were visually identified in Galaxy Zoo. The 2930 mergers were selected from known SDSS mergers and the respective non-mergers were the closest match in both redshift and r magnitude. The NN architecture was built by testing a different number of layers with different sizes and variations of the dropout rate. We compared input spaces constructed using: the five SDSS filters: u, g, r, i, and z; combinations of bands, colours, and their errors; six magnitude types; and variations of input normalization. Results. We find that the fibre magnitude errors contribute the most to the training accuracy. Studying the parameters from which they are calculated, we show that the input space built from the sky error background in the five SDSS bands alone leads to 92.64 ± 0.15% training accuracy. We also find that the input normalization, that is to say, how the data are presented to the NN, has a significant effect on the training performance. Conclusions. We conclude that, from all the SDSS photometric information, the sky error background is the most sensitive to merging processes. This finding is supported by an analysis of its five-band feature space by means of data visualization. Moreover, studying the plane of the g and r sky error bands shows that a decision boundary line is enough to achieve an accuracy of 91.59%.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Off forward non- s -channel helicity conserving contributions to exclusive vector quarkonium production from the spin dependent BFKL Pomeron

A novel contribution to off forward, exclusive vector quarkonium production, γ(*)+p → V+p, at high energy is derived which corresponds to a t-channel exchange of a Balitsky-Fadin-Kuraev-Lipatov (BFKL) hard Pomeron, with a helicity flip of the proton. This “spin-dependent BFKL Pomeron” is required in a consistent expansion in powers of the momentum transfer t ≈−Δ$^{2}_{⊥}$ beyond first order. The spin-dependent Pomeron violates s-channel helicity conservation at O(Δ$^{2}_{⊥}$), and beyond. Expanding to leading twist only, it corresponds to generalized parton distributions E g (x,t) for vanishing skewness. We derive explicit expressions for the eikonal BFKL amplitudes, to all orders in dipole size times momentum transfer, for all helicity configurations of the particles in the initial and final states. We also provide numerical estimates of the helicity flip two gluon exchange amplitude at moderate x from a light cone quark model of the proton. The spin dependent BFKL Pomeron could, in principle, be discovered via double spin asymmetries in e+p → e+p+J/ψ with a transversely polarized proton and longitudinally polarized electron in the initial state.

Deep inelastic scattering↗
DOE OSTI2025

Evaluation of PBR Spent Fuel Criticality and Dose Rate Compliance for Storage and Transportation

Spent tri-structural isotropic (TRISO)–based fuels have a strong track record in storage and transportation without documented incidents. This work seeks to reduce uncertainty to aid in more informed spent fuel management of TRISO-based fuels by modeling both fresh and spent pebble bed reactor (PBR) fuel and comparing the results to the regulatory standards from 10 CFR 71. SCALE was used for all modeling due to it having fast and accurate methods for handling PBR fuel modeling, as well as having an efficient method for shielding calculations in monaco with automated variance reduction using importance calculations (MAVRIC), which utilizes the consistent adjoint-driven importance sampling (CADIS) and the forward-weighted consistent adjoint-driven importance sampling (FW-CADIS) methods. KENO-VI was used for all criticality calculations, TSUNAMI was used for uncertainty quantification on k-effective, TRITON and the Oak Ridge isotope generation code (ORIGEN) were both used for depletion of the fuel, and MAVRIC was used for shielding calculations. For criticality assessments, this study focused on the requirement that the value of the neutron multiplication factor, k-effective (k-eff), would not exceed a peak value of 0.95, including uncertainty, with 95% confidence. Criticality was initially examined by modeling fresh fuel from three different designs—HTR-10 fuel, PBMR-400 fuel, and demonstration fuel representative of a TRISO-fueled modern high-temperature gas reactor (HTGR) design, henceforth referred to as Demo HTGR—and placing them into various sized containers with conditions described in 10 CFR 71 to quantify the peak k-eff state. When the peak value of 0.95 k-eff was exceeded, mitigation methods were examined in those scenarios. Burnup credit, pebble displacement in areas of strong neutron multiplication, and random pebble replacement using pebbles of various compositions and replacement fractions were examined. In summary, the criticality of PBR fuels can be well accounted for by restricting container size, taking credit for burnup, or by displacing/replacing pebbles. Uncertainty of the k-eff due to nuclear data uncertainties was recorded at ~0.6644%Δk/k, or roughly 664% mil (pcm). The nuclear data–induced uncertainty was relatively small and should not require significant modification in the design to be accounted for. Revisions to the evaluated nuclear data file values have been shown to have a larger impact than nuclear data–induced uncertainty. For dose rate aspects, U.S. Nuclear Regulatory Commission regulations require a maximum dose rate of 10 millirem per hour (mrem/h) at 2 meters. In examining the dose rate behavior of spent PBR fuel, the representative Demo HTGR fuel was modeled exclusively due to it possessing the highest target burnup of the examined fuels. Equilibrium cycle modeling methods were used to produce a higher-fidelity discharge isotopic composition than simple assumptions, such as reflected pebbles. The discharge composition was used as a source term in the fixed-source transport shielding calculations, and dose rates were calculated at 2 m for the shortest possible cooling time. The low concentration of fuel material led to dose rates that were in line with regulatory limits, despite the high burnup when compared to traditional light water reactor fuels. In conclusion, the methods employed in this study would require more work to further verify and validate and are limited to the criticality and dose rate analyses performed.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

b b ¯ kinematic correlations in cold nuclear matter

Background: The LHCb Collaboration has studied a number of kinematic correlations between B -hadron pairs through their subsequent decays to J / ψ pairs in p + p collisions at 7 and 8 TeV for four minimum values of the J / ψ p T . Purpose: In this work, these measurements are compared to calculations of b b ¯ pairs and their hadronization and inclusive decays to J / ψ J / ψ are compared to the same observables. Potential cold matter effects on the b b ¯ pair observables are discussed to determine which are most likely to provide insights about the system and why. Methods: The calculations, employing the exclusive HVQMNR code, assume the same intrinsic k T -broadening and fragmentation as in prior work. The pair distributions presented by LHCb are calculated in this approach, both for the parent b b ¯ and the J / ψ J / ψ pairs produced in their decays. The sensitivity of the results to the intrinsic k T broadening is shown. The theoretical uncertainties due to the b quark mass and scale variations on both the initial b b ¯ pairs and the resulting J / ψ pairs are also shown, as is the dependence of the results on the rapidity range of the measurement. Possible effects due to the presence of the nucleus are studied by increasing the size of the k T broadening and modifying the fragmentation function. Results: Good agreement with the LHCb data is found for all observables. The parent b b ¯ distributions are more sensitive to the k T broadening than are the final-state J / ψ pairs. Conclusions: Next-to-leading order calculations with k T broadening, as in prior work, can describe all correlated observables. Multiple measurements of correlated observables are sensitive to different nuclear effects which can help distinguish between them.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Modeling the differential rate for signal interactions in coincidence with noise fluctuations or large rate backgrounds

The characteristic energy of a relic dark matter interaction with a detector scales strongly with the putative dark matter mass. Consequently, experimental search sensitivity at the lightest masses will always come from interactions whose size is similar to noise fluctuations and low energy backgrounds in the detector. In this paper, we correctly calculate the net change in measured differential event rate due to low rate signal interactions that overlap in time with noise and backgrounds, accounting for both periods of time when the signal is coincident with noise/backgrounds and for the decreased amount of time in which only noise/backgrounds occur and we show that the introduction of random simulated signal events into the continuous raw data stream (a form of “salting”) provides a correct and practical implementation to estimate this net linear signal sensitivity. Unfortunately this does not apply to the situation with non negligible pileups as we show through explicit examples. Consequently, this exclusion technique should be complemented by less sensitive techniques that can separately exclude large rate, high pileup signal parameter space. An analysis threshold above the Gaussian-like noise component of the measured differential rate spectrum should also likely produce conservative limits. Though previous light mass dark matter searches did not correctly account for decreased background only live time effects in their signal sensitivity, conservative analysis choices likely protected their published limits from being nonconservative.

Li, Xinran↗