Search NASA⌕ Search

SEARCH · Search NASA

Results for “solar white”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Evaluation of Coatings and Materials for Future Radiators

Radiators are used to reject energy from space vehicles through radiant heat transfer. They are typically the largest component in a vehicle's thermal control system and can have a large impact on the vehicle design and operation. NASA s current vision for exploration dictates that radiators for a Crew Exploration Vehicle (CEV), a Lunar Surface Access Module (LSAM), and a lunar base will need to be developed. These applications present new challenges when compared to previous radiators on the Space Shuttle and International Space Station (ISS). In addition, many technological advances have been made that could positively impact future radiator design. This paper outlines new requirements for future radiators and documents a trade study performed to select the some promising technologies for further evaluation. The technologies include K1100 based carbon composites for the radiator surface as well as Optical Solar Reflectors (OSRs), a lithium based white paint, and electrochromic thin films for optical coatings. Coupons were made using these materials and tests were performed to characterize their performance. Testing included evaluating structural and thermal properties of the carbon composites, thermal cycling, launch pad weather simulation, and exposure to solar wind, and Ultraviolet (UV) radiation.

Tuan, George C.↗

(abstract) Interplanetary Lyman-alpha Observations with the Galileo Ultraviolet Spectrometer: Solar Wind Latitude Variations and Multiple Scattering at Solar Maximum

The Galileo Ultraviolet Spectrometer obtained a Lyman-alpha celestrial sphere map on 13,14 December 1990 near the first Earth encounter, with spacecraft near the interstellar wind downwind axis. The data show solar flux longitudinal and latitudinal asymmetries which are modeled with He 10830 Ssolar images. The difference between the observed brightness and a single scattering model is attributed to multiple scattering effects, which we also calculate. The data constrain the solar wind flux latitude variation at solar maximum. Other 1990-1992 Galileo Lyman-alpha data will be discussed.

solar wind ultraviolet spectrometer solar flux cel↗

Results of the 1981 NASA/JPL balloon flight solar cell calibration program

The calibration of the direct conversion of solar energy through use of solar cells at high altitudes by balloon flight is reported. Twenty seven modules were carried to an altitude of 35.4 kilometers. Silicon cells are stable for long periods of time and can be used as standards. It is demonstrated that the cell mounting cavity may be either black or white with equal validity in setting solar simulators. The calibrated cells can be used as reference standards in simulator testing of cells and arrays.

Seaman, C. H.↗

Solar observations with the Multi-Spectral Solar Telescope Array

The Multi-Spectral Solar Telescope Array (MSSTA) is a sounding rocket-borne solar observatory which was succesfully launched on May 13, 1991, from the White Sands Missile Range, NM. Ultrahigh resolution, full-disk solar X-ray, EUV, and FUV images were obtained with the MSSTA Herschelian, Cassegrain, and Ritchey-Chretien telescopes. We describe the payload and provide some preliminary scientific results from the flight.

Hoover, Richard B.↗

Current technology for development of low solar absorptance/high emittance coatings

A comprehensive program to develop low solar absorptance/high emittance coatings, to be successful, must coordinate basic materials preparation, coatings technology, environmental simulation, production, and flight-test evaluation. The prime criteria for 'white' thermal-control coatings are low solar absorptance and, most importantly, solar-absorptance stability. Many variables affect the solar absorptance and its stability. These effects must be discerned and evaluated. The factors involved, however, are not entirely independent; accordingly, the present paper emphasizes the major variables, the relationships among them, and how important they are in improving the properties and performance of the coatings.

Gilligan, J. E.↗

Mass distribution and evolutionary scheme for central stars of planetary nebulae

IUE data and a distance measuring method that considered central stars in optically thick nebulae were used to examine mass distributions of planetary nebulae. Other data such as spectral type, spatial and kinematic characteristics, etc., were studied to derive relationships between population type and mass distribution. A central star mass range of at least 0.55 solar mass was obtained. Stars with masses of at least 0.64 solar mass, concentrated in the galactic disk, originated from 1.5 solar mass stars. Low mass nuclei originated in old disk or halo populations and evolved from 1.0 solar mass objects. A mass-loss parameter value of 1/3 was calculated for red giants, implying that white dwarfs evolve from stars of under 5 solar masses. Mass distributions around planetary nuclei were concluded to follow patterns associated with the individual mass.

Heap, Sara R.↗

1985 Voyager 2 Radio Ranging Measurements of Coronal Density: Asymmetry in the Radial Profiles Explained

An asymmetry in the radial variation of electron density above the cast and west limbs of the Sun was inferred from centimeter wavelength ranging measurements conducted by Voyager 2 during its 1985 solar conjunction. The Voyager 2 ranging measurements, which took place in the heliocentric distance range of 7-40 solar radius, have been compared with the white-light coronagraph measurements of the underlying corona collected by the Mark 3 K-coronameter located at the Mauna Loa Solar Observatory. It is shown that the disparity in radial profiles is not real but is instead caused by longitudinal variations stemming from the probing of significantly different source regions its revealed in the white-light measurements. These results improve our understanding of the probing abilities of ranging measurements and their relationship to white-light measurements. They reinforce the notion that the high-precision and high-sensitivity features of ranging measurements are more fully exploited in the investigation of density variations across the ubiquitous low-contrast raylike structures that permit the corona, rather than in determining radial density profiles.

Woo, Richard↗

Why P/OF should look for evidences of over-dense structures in solar flare hard X-ray sources

White-light and hard X-ray (HXR) observations of two white-light flares (WLFs) show that if the radiative losses in the optical continuum are powered by fast electrons directly heating the WLF source, then the column density constraints imposed by the finite range of the electrons requires that the WLF consist of an over-dense region in the chromosphere, with density exceeding 10 to the 14th power/cu cm. Thus, we recommend that P/OF search for evidences of over-dense structures in HXR images obtained simultaneously with optical observations of flares.

Neidig, D. F.↗

On the Coronal Mass Ejection Detection Rate during Solar Cycles 23 and 24

The Solar and Heliospheric Observatory (SOHO) mission's white light coronagraphs have observed more than25,000 coronal mass ejections (CMEs) from 1996 January to the end of 2015 July. This period of time covers almost two solar cycles (23 and 24). The basic attributes of CMEs, reported in the SOHO/Large Angle and Spectrometric Coronagraph (LASCO) catalog, during these solar cycles were statistically analyzed. The question of the CME detection rate and its connection to the solar cycles was considered in detail. Based on the properties and detection rate, CMEs can be divided into two categories: regular and specific events. The regular events are pronounced and follow the pattern of sunspot number. On the other hand, the special events are poorer and more correlated with the general conditions of heliosphere and corona. Nevertheless, both groups of CMEs are the result of the same physical phenomenon, viz. release of magnetic energy from closed field regions. It was demonstrated that the enhanced CME rate, since the solar cycle 23 polar-field reversal, is due to a significant decrease of total(magnetic and plasma) heliospheric pressure as well as the changed magnetic pattern of solar corona. CMEs expel free magnetic energy and helicity from the Sun; therefore, they are related to complex solar magnetic field structure. It is also worth emphasizing that the CMEs listed in the SOHO/LASCO catalog are real ejections (not false identification). Their detection rate reflects the global evolution of the magnetic field on the Sun, and not only changes in the magnetic structures associated with sunspots.

Michalek, Grzegorz↗

The Spacelab Lyman alpha and white light coronagraphs program

The Harvard-Smithsonian Center for Astrophysics and the High Altitude Observatory have defined a joint coronagraphs experiment for a future Spacelab mission. The instrumentation package would include an ultraviolet light coronagraph to measure the intensity and profiles of spectral lines formed between 1.2 and 8 solar radii from sun center and a white light coronagraph to measure the intensity and polarization of visible light. The overall goals of the joint program are to use new coronal plasma diagnostic techniques to understand the physical processes and mechanisms operating in the solar corona, to understand the acceleration of high-speed and low-speed solar wind streams and to extrapolate this knowledge to other stars in order to help understand the physics of stellar coronae and stellar mass loss.

Kohl, J. L.↗

Effect of thruster pulse length on thruster-exhaust damage of S13G white thermal control coatings

Rocket exhaust products which strike thermal control surfaces cause changes in solar absorptance (Alpha Sub s) and thermal emittance (Epsilon) of these surfaces. A study was made of the effect of rocket pulse duration on exhaust damage to S13G white coatings. Two pulse lengths were used - 14 msec and 50 msec. An MMH/N204 bipropellant 5-lb thrust rocket was fired into a simulated space environment with a vacuum of 0.00001 torr, a liquid helium temperature enclosure, and solar radiation. The changes in solar absorptance and thermal emittance of S13G white coatings due to rocket exhaust were made in-situ for total firing times of 58 seconds with 14 msec pulses and 223.7 sec with 50 msec pulses. The solar absorptance of S13G increased 25 percent due to 223.7 sec of exposure to 50 msec pulses and the thermal emittance was unaffected. The ratio of Alpha Sub s/Epsilon therefore increased by 25 percent. The short 14 msec pulse exhaust exposure caused between 40 and 70 percent increase in solar absorptance and a decrease of between 13 and 18 percent in thermal emittance. The corresponding increase in Alpha Sub s/Epsilon ratio was between 80 and 100 percent. Ultraviolet radiation was present in the short pulse test and may have contributed to the large damage of that test.

Sommers, R. D.↗

Solar Sail Propulsion: Enabling New Capabilities for Heliophysics

Solar sails can play a critical role in enabling solar and heliophysics missions. Solar sail technology within NASA is currently at 80% of TRL-6, suitable for an in-flight technology demonstration. It is conceivable that an initial demonstration could carry scientific payloads that, depending on the type of mission, are commensurate with the goals of the three study panels of the 2010 Heliophysics Survey. Follow-on solar sail missions, leveraging advances in solar sail technology to support Heliophysics Survey goals, would then be feasible. This white paper reports on a sampling of missions enabled by solar sails, the current state of the technology, and what funding is required to advance the current state of technology such that solar sails can enable these missions

Johnson, L.↗

Perceptions of Large-Scale Solar Project Neighbors: Results From a National Survey [Slides]

Driven by favorable economics, policy factors, and decarbonization goals, large-scale solar (LSS, defined here as ground-mounted photovoltaic projects ≥1 MWDC) has expanded rapidly in recent years, with more than 90 gigawatts (GW) now installed across the United States. Growth in LSS deployment is anticipated to accelerate in response to growing electricity demand and utility, state, and federal decarbonization goals. This continued expansion hinges, in part, on the continued support of local residents and decision-makers in communities hosting LSS projects. Understanding the perceptions and attitudes of existing LSS neighbors is critical to inform and enable future LSS deployment, and to improve outcomes for those host communities. As of 2022, there were more than 10 million U.S. homes within 3 miles of LSS plants. Yet, until recently, no comprehensive study had examined the experiences and perceptions of these LSS neighbors. In 2023, a Berkeley Lab team worked with the University of Michigan and Michigan State University to conduct the first-of-its-kind nationally representative survey of LSS neighbors as part of the Community-Centered Solar Development research project. The survey effort ultimately collected 984 responses from residents within 3 miles of existing LSS projects. The survey results are available for download via the full summary analysis slide deck report, as well as a shorter (~4 page) summary brief. The survey instrument (questionnaire) is also available for download for those interested in understanding the survey design or replicating questions in future research.

14 SOLAR ENERGY↗

Probing the Solar Corona with Radio Ranging Measurements

An asymmetry in the radial variation of electron density above the east and west limbs of the Sun was inferred from centimeter wavelength ranging measurements conducted by Voyager 2 during its 1985 solar conjunction. These older data are compared with white- light coronagraph measurements of the underlying corona collected by the Mark III K-coronameter at the Mauna Loa Solar Observatory.

solar corona Voyager coronameter coronagraph radio↗

Solar+Storage for Household Back-up Power: Implications of building efficiency, load flexibility, and electrification for backup during long-duration power interruptions [Slides]

The study analyzes the evolving role of solar+storage for home backup power during long-duration power interruptions. In particular, it evaluates how required storage sizing is impacted as homes become more efficient, flexible, and electrified. The study relies on NREL’s ResStock building modeling platform to create statistically representative distributions of the existing building stock in ten locations across the United States. It then shows how the amount battery storage required for backup power rises or falls as a series of building envelope efficiency, load flexibility, and electrification measures are applied across the building stock in each region. The study also includes sensitivities to show how backup power requirements are impacted by the timing and duration of power interruptions, and explores variation in backup power requirements across the building stock within each study location. The results demonstrate the value of pairing solar+storage with efficiency upgrades, smart home controls, and (in mild winter climates) efficient heat pump retrofits. That value comes in the form of reducing the amount of storage required and/or extending the range of interruption conditions over which a given system can provide backup power (i.e., more extreme weather and/or longer interruptions). Heat pumps in cold-weather climates can pose a challenge for solar+storage backup power, given the amount of storage required, though are a vast improvement over electric-resistance heating. Retaining existing fossil-based heating systems for occasional use during power interruptions, as either the primary or supplementary source of heat, can mitigate this challenge. Other forms of building electrification (e.g., cooking and water heating) generally have marginal impacts on backup battery sizing, given their relatively small energy demand.

14 SOLAR ENERGY↗

Leveraging Military Veteran Talent Through SkillBridge Training: Recommendations for the Solar Industry

Solar Energy International (SEI), in partnership with IREC, has published a white paper, Leveraging Military Veteran Talent Through SkillBridge Training: Recommendations for the Solar Industry. This resource presents SkillBridge as a key strategy for solar employers to attract, develop, and retain qualified veteran talent, and provides model training frameworks aligned with four key occupations, including solar installation, operations and maintenance, technical sales, and solar design.

Howes, Megan↗

MSFC Skylab Apollo Telescope Mount thermal control system mission evaluation

The Skylab Saturn Workshop Assembly was designed to expand the knowledge of manned earth orbital operations and accomplish a multitude of scientific experiments. The Apollo Telescope Mount (ATM), a module of the Skylab Saturn Workshop Assembly, was the first manned solar observatory to successfully observe, monitor, and record the structure and behavior of the sun outside the earth's atmosphere. The ATM contained eight solar telescopes that recorded solar phenomena in X-ray, ultraviolet, white light, and hydrogen alpha regions of the electromagnetic spectrum. In addition, the ATM contained the Saturn Workshop Assembly's pointing and attitude control system, a data and communication system, and a solar array/rechargeable battery power system. This document presents the overall ATM thermal design philosophy, premission and mission support activity, and the mission thermal evaluation. Emphasis is placed on premission planning and orbital performance with particular attention on problems encountered during the mission. ATM thermal performance was satisfactory throughout the mission. Although several anomalies occurred, no failure was directly attributable to a deficiency in the thermal design.

Hueter, U.↗

The X-ray spectrum of AM Herculis from 0.1 to 150 keV

No significant flux at 100 keV was detected in the observations by the HEAO 1 satellite (March and April of 1978) and in several OSO 7 observations. The spectrum above 2 keV can be fitted by a composite thermal bremsstrahlung model that includes an approximation to the albedo expected from the white dwarf. The bremsstrahlung kT sub e from this model (30.9 + or - 4.5 keV) implies a white dwarf mass in excess of 0.6 solar mass. An emission feature at 6.5 + or - 0.15 keV and equivalent width of 0.8 + or - 0.1 keV is confirmed; it is thought that this might be due to fluorescence from the white dwarf by the bremsstrahlung from a small thin shocked region. It is noted that the continuum could also have been steepened at high energy in scattering in the accretion column, but the line photons cannot have gone through the same optical depths.

Rothschild, R. E.↗