Search NASA⌕ Search

SEARCH · Search NASA

Results for “space electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Degradation of Aluminum and Tantalum Wet Electrolytic Capacitors during High Temperature Storage

Aluminum electrolytic capacitors (AEC) are available to higher ranges of capacitance and voltage compared to tantalum electrolytic capacitors (TEC). However, evaporation of the electrolyte during operation or storage of conventional AEC that is accelerated with temperature does not allow use of these parts in space electronics. Instead, for systems requiring large value capacitors and high operating voltages, designers must use banks of TECs that increases substantially the size and weight of electronic modules. Development of hermetically sealed AECs might be beneficial for space systems provided the necessary reliability is assured. Increase in leakage current during storage of AEC is well known and is often explained by dissolution of aluminum oxide in electrolyte. However, other possible mechanisms of this effect have not been discussed. Although hermetically sealed TEC have been used in space systems for years, there is a lack of information about the effects of storage on their characteristics that is of great interest as a comparison for aluminum capacitors. This work explores degradation of AC characteristics (capacitance, dissipation factor, and equivalent series resistance) and DC characteristics (leakage and absorption currents) in different types of aluminum and tantalum hermetically sealed capacitors during long-term storage at high temperatures (100 °C, 125 °C, and 150 °C). It is shown that leakage currents are degrading in both types of capacitors, but this degradation is reversible after bias application. Mechanisms of degradation are discussed, and explanations based on the processes common for both types of capacitors are suggested. Problems associated with assessments of hermeticity and evaporation of the electrolyte in hermetically sealed capacitors are analyzed.

Alexander Teverovsky↗

Particle-in-cell simulation of multipactor discharge on a dielectric in a parallel-plate waveguide

An original 2D3V (two-dimensional in coordinate space and three-dimensional in velocity space) particle-in-cell code has been developed for simulation of multipactor discharge on a dielectric in a parallelplate metal waveguide with allowance for secondary electron emission (SEE) from the dielectric surface and waveguide walls, finite temperature of secondary electrons, electron space charge, and elastic and inelastic scattering of electrons from the dielectric and metal surfaces. The code allows one to simulate all stages of the multipactor discharge, from the onset of the electron avalanche to saturation. It is shown that the threshold for the excitation of a single-surface multipactor on a dielectric placed in a low-profile waveguide with absorbing walls increases as compared to that in the case of an unbounded dielectric surface due to escape of electrons onto the waveguide walls. It is found that, depending on the microwave field amplitude and the SEE characteristics of the waveguide walls, the multipactor may operate in two modes. In the first mode, which takes place at relatively low microwave amplitudes, a single-surface multipactor develops only on the dielectric, the surface of which acquires a positively potential with respect to the waveguide walls. In the second mode, which occurs at sufficiently high microwave intensities, a single-surface multipactor on the dielectric and a two-surface multipactor between the waveguide walls operate simultaneously. In this case, both the dielectric surface and the interwall space acquire a negative potential. It is shown that electron scattering from the dielectric surface and waveguide walls results in the appearance of high-energy tails in the electron distribution function.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Technical Report for NSF/DOE partnership grant 1004284/ER54905/SC0004660: 2011- 2013

Research has been performed on two topics: (1) Nonlinear time-dependent phenomena in the regime of electron magnetohydrodynamics (EMHD). (2) Plasma structures forming ”bubbles”. The latter are regions of localized density depletions or enhancements separated from the ambient plasma by sheaths or double layers. Three-dimensional magnetic null points can also be considered as ”magnetic bubbles”. Nonlinear EMHD fields are generated by pulsed magnetic loops. The magnetic field varies in time faster than an ion cyclotron period, hence interacts only with electrons. Space charge electric fields are created when magnetic forces try to separate electrons from ions. Electric and magnetic forces nearly balance to keep the plasma quasi neutral. This leads to rotational electron motions, i.e. Hall currents and associated magnetic perturbations. When the time scale falls between the ion and electron cyclotron period the magnetic perturbation is convected in the whistler mode. When the time-varying magnetic field exceeds the background magnetic field the whistler mode becomes highly nonlinear since its properties depend on the total magnetic field. When the time-varying magnetic field creates magnetic null points or null lines EMHD breaks down. Electrons can be accelerated in null lines which dissipated magnetic energy like in magnetic reconnection. Energized electrons with anisotropic distributions create secondary whistler instabilities. These effects have been observed in field topologies resembling spheromaks and field-reversed configurations (FRCs). The whistler mode propagation near magnetic nulls is not trivial when the field gradients and wavelength are comparable. Ray tracing is inappropriate when the WKB approximation breaks down. Experiments have been started to map wave propagation on curved field lines with null points. Initial results show that whistlers in highly nonuniform fields have highly oblique phase velocities but the energy flow remains dominantly along the field. Density bubbles are created by anode discharges, typically forming spherical ”fireballs” bounded by a double layer. In a magnetized plasma the shape becomes cylindrical, in nonuniform magnetic fields many asymmetric fireball shapes are possible. Due to electron energization the fireball plasma has higher density and temperature than the ambient plasma. The double layer can also be produced by a high transparency positively biased grid. Instabilities arise from the electron transit through the plasma bubble and the double layer. When a permanent magnet is biased positively the electrons perform ExB drifts in the equatorial plane between the poles. Electron drift modes are excited with a high spectral contents. Similarly, a negatively biased magnet produces a disk-shaped plasma bubble. The cold magnet emits secondary electrons due to the impact of energetic ions. Such magnetron discharges exhibit a variety of instabilities which affect the cross-field transport and sputtering applications. This report will summarize the main effects observed and provide references to more detailed publications.

, nonlinear time-dependent phenomena↗

Construction and evaluation of an imaging focussed-mesh electron multiplier for space instrumentation

A focused-mesh electron multiplier (FMEM) has been combined with a wedge and strip position-sensitive anode to create a novel detector that is considered likely to have a number of applications in space astronomy and laboratory image sensing. Results from the first application of a wedge and strip anode to an FMEM are presented including spatial resolution, spatial linearity, background rate, and pulse risetime. The converted multiplier retains the attributes of an FMEM that made it attractive in the first place, such as low background, high speed, and high dynamic range.

Vallerga, J.↗

Application of an alkylammonium method for characterization of phyllosilicates in CI chondrites

Many meteorites and interplanetary dust particles (IDP's) with primitive compositions contain significant amounts of phyllosilicates, which are generally interpreted as evidence of protoplanetary aqueous alteration at an early period in the solar system. These meteorites are chondrites of the carbonaceous and ordinary varieties. Characterization of phyllosilicates in these materials is important because of the important physico-chemical information they hold, e.g., from well characterized phyllosilicates, thermodynamic stability relations and hence the conditions of formation of phyllosilicates in the parent body of the meteorite can be predicted. Although we are at a rudimentary level of understanding of the minerals resulting from the aqueous alteration in the early solar nebula, we know that the most common phyllosilicates present in chondritic extraterrestrial materials are serpentines, smectites, chlorites, and micas. The characterization of fine grained minerals in meteorites and IDP's rely heavily on electron beam instruments, especially transmission electron microscopy (TEM). Typically, phyllosilicates are identified by a combination of high resolution imaging of basal spacings, electron diffraction analysis, and chemical analysis. Smectites can be difficult to differentiate from micas because the smectites loose their interlayer water and the interlayers collapse to the same basal spacing as mica in the high vacuum of the TEM. In high-resolution TEM (HRTEM) images, smectite basal spacings vary from 1 nm up to 1.5 nm, while micas show 1 or 2 nm basal spacings. Not only is it difficult to differentiate smectites from micas, but there is no way of identifying different classes of smectites in meteorites and IDP's. To differentiate smectites from micas and also to recognize the charge differences among smectites, an alkylammonium method can be employed because the basal spacings of alkylammonium saturated smectites expand as a function of alkylamine chain length and the layer-charge density of the 2:1 expanding phyllosilicate, and the final product is significantly more stable under electron beam examination. Such a method was tested on standard clays and several meteorite samples using four alkylammonium salts.

Golden, D. C.↗

Near fields in the vicinity of pulsed electron beams in space

Most measurements of the radio frequency emissions from artificial electron beams in space have been made in close proximity to the beam. This paper presents theory and results for the near-field radiation associated with the operation of a pulsed electron beam, taking into account the effects of the ionospheric plasma. The beam is modeled as an infinite train of square-wave pulses and the radiation is obtained by adding coherently the radiation from each individual electron in the idealized helical trajectory assumed by the beam as it traverses the magnetized plasma. The mathematical solution is obtained by taking the Fourier transform in space and time of Maxwell's equations and the driving modulated beam current, and then taking the inverse transform of the resulting electric field. Typical electric field strengths are presented for a range of modulation frequencies extending from below the ion cyclotron to the electron cyclotron frequency.

Harker, K. J.↗

Strong Field Electron Emission from Fixed in Space H{sub 2}{sup +} Ions

We have studied electron emission from the H{sub 2}{sup +} ion by a circularly polarized laser pulse (800 nm, 6x10{sup 14} W/cm{sup 2}). The electron momentum distribution in the body fixed frame of the molecule is experimentally obtained by a coincident detection of electrons and protons. The data are compared to a solution of the time-dependent Schroedinger equation in two dimensions. We find radial and angular distributions which are at odds with the quasistatic enhanced ionization model. The unexpected momentum distribution is traced back to a complex laser-driven electron dynamics inside the molecule influencing the instant of ionization and the initial momentum of the electron.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Incoherent effect of space charge and electron cloud

Trapping by resonances or scattering off resonances induced by space charge (SC) or electron cloud (EC) in conjunction with synchrotron motion can explain observations of slow beam loss and emittance growth, which are often accompanied by changes in the longitudinal beam profile. In this paper we review the recent progress in understanding and modeling of the underlying mechanisms, highlight the differences and similarities between space charge and electron cloud, and discuss simulation results in the light of experimental observations, e.g., at GSI, CERN, and BNL. In particular, we address the role of the pinched electrons and describe in detail the complexity of the electron pinch formation. We present simulation results within a dipole or in a field-free region of the beam pipe, which reveal the morphology and main features of this phenomenon, explain the physical origin of the complex electron structures like stripe in either field configuration, and discuss the dependence on some key parameters.

43 PARTICLE ACCELERATORS↗

Compression of Subrelativistic Space-Charge-Dominated Electron Bunches for Single-Shot Femtosecond Electron Diffraction

We demonstrate the compression of 95 keV, space-charge-dominated electron bunches to sub-100 fs durations. These bunches have sufficient charge (200 fC) and are of sufficient quality to capture a diffraction pattern with a single shot, which we demonstrate by a diffraction experiment on a polycrystalline gold foil. Compression is realized by means of velocity bunching by inverting the positive space-charge-induced velocity chirp. This inversion is induced by the oscillatory longitudinal electric field of a 3 GHz radio-frequency cavity. The arrival time jitter is measured to be 80 fs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Eliminating unwanted electrons in EBIS devices

In electron beam ion sources, step-wise ionization to high charge states is accomplished by magnetically confined electron beam. Electron space charge and high voltage electrodes confine the ions. The relativistic heavy ion collider (RHIC) ion source Debye length meets requirements for instabilities with free source of energy to grow. Electrons stripped from ions provide energy for a variety of microinstabilities to grow. Possible solution is to remove these electrons from the trap to a drift tube biased to higher voltage than the other tubes between the gate and the collector. If needed, a split drift tube for bleeding these electrons to ground is added.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Reliability of Electronics for Cryogenic Space Applications Being Assessed

Many future NASA missions will require electronic parts and circuits that can operate reliably and efficiently in extreme temperature environments below typical device specification temperatures. These missions include the Mars Exploration Laboratory, the James Webb Space Telescope, the Europa Orbiter, surface rovers, and deep-space probes. In addition to NASA, the aerospace and commercial sectors require cryogenic electronics in applications that include advanced satellites, military hardware, medical instrumentation, magnetic levitation, superconducting energy management and distribution, particle confinement and acceleration, and arctic missions. Besides surviving hostile space environments, electronics capable of low-temperature operation would enhance circuit performance, improve system reliability, extend lifetime, and reduce development and launch costs. In addition, cryogenic electronics are expected to result in more efficient systems than those at room temperature.

Patterson, Richard L.↗

Evolution of electron beam phase space distribution in a high-gain FEL

FEL-based coherent electron cooling (CEC) offers a new avenue to achieve high luminosities in high energy colliders such as RHIC, LHC, and eRHIC. Traditional treatments consider the FEL as an amplifier of optical waves with specific initial conditions, focusing on the resulting field. CEC requires knowledge of the phase space distribution of the electron beam in the FEL. We present 1D analytical results for the phase space distribution of an electron beam with an arbitrary initial current profile, and discuss approaches of expanding to 3D results.

43 PARTICLE ACCELERATORS↗

Clay minerals in primitive meteorites and interplanetary dust 2. Smectites and micas

The classification is briefly summarized of stony meteorites and cosmic dust, and the mineralogy and chemistry is described of serpentine group minerals. The occurrence of smectites and micas in extraterrestrial materials is examined. The characterization of fine grained minerals in meteorites and IDPs relies heavily on electron beam instruments, especially the transmission electron microscope (TEM). Typically, phyllosilicates are identified by a combination of high resolution imaging of basal spacings, electron diffraction, and chemical analysis. Smectites can be difficult to differentiate from micas because the smectites lose their interlayer water and the interlayer partly collapse in the high vacuum of the TEM.

Keller, L. P.↗

A Single-Block TRL Test Fixture for the Cryogenic Characterization of Planar Microwave Components

The High-Temperature-Superconductivity (HTS) group of the RF Technology Branch, Space Electronics Division, is actively involved in the fabrication and cryogenic characterization of planar microwave components for space applications. This process requires fast, reliable, and accurate measurement techniques not readily available. A new calibration standard/test fixture that enhances the integrity and reliability of the component characterization process has been developed. The fixture consists of 50 omega thru, reflect, delay, and device under test gold lines etched onto a 254 microns (0.010 in) thick alumina substrate. The Thru-Reflect-Line (TRL) fixture was tested at room temperature using a 30 omega, 7.62 mm (300 mil) long, gold line as a known standard. Good agreement between the experimental data and the data modelled using Sonnet's em(C) software was obtained for both the return (S(sub 11)) and insertion (S( 21)) losses. A gold two-pole bandpass filter with a 7.3 GHz center frequency was used as our Device Under Test (DUT), and the results compared with those obtained using a Short-Open-Load-Thru (SOLT) calibration technique.

Mejia, M.↗

The ISPM solar-wind plasma experiment

The ISPM solar wind plasma experiment accurately characterizes the bulk flow and internal state conditions of the interplanetary plasma in three dimensions at all heliographic distances and heliographic latitudes reached by the spacecraft. Solar wind electrons, protons, alpha particles, and heavier ions are measured. Oxygen, silicon, and iron ions at various charge levels are resolved. Electrons and ions are measured simultaneously with independent curved-plate electrostatic analysers equipped with multiple continuous channel electron multipliers arranged so that particle velocity distributions are suitably resolved without gaps in spacecraft polar-angle space. Electrons with energies between 1 and 900 eV are detected at 7 polar angles and various combinations of azimuth angle to cover the unit sphere comprehensively. Ions are detected between 257 eV/Q and 35 keV/Q. Data matrices are obtained every 4 min when the spacecraft is actively transmitting and every 8 min during storage periods. These matrices contain sufficient energy and angle resolution to permit detailed calculations of ion velocity distributions.

Bame, S. J.↗

Commensurate 4 a 0 -period charge density modulations throughout the Bi 2 Sr 2 CaCu 2 O 8+x pseudogap regime

Theories based upon strong real space (r-space) electron–electron interactions have long predicted that unidirectional charge density modulations (CDMs) with four-unit-cell (4a0) periodicity should occur in the hole-doped cuprate Mott insulator (MI). Experimentally, however, increasing the hole density p is reported to cause the conventionally defined wavevector QA of the CDM to evolve continuously as if driven primarily by momentum-space (k-space) effects. Here we introduce phase-resolved electronic structure visualization for determination of the cuprate CDM wavevector. Remarkably, this technique reveals a virtually doping-independent locking of the local CDM wavevector at |Q0|=2π/4a0|Q0|=2π/4a0 throughout the underdoped phase diagram of the canonical cuprate Bi2Sr2CaCu2O8. These observations have significant fundamental consequences because they are orthogonal to a k-space (Fermi-surface)–based picture of the cuprate CDMs but are consistent with strong-coupling r-space–based theories. Our findings imply that it is the latter that provides the intrinsic organizational principle for the cuprate CDM state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗