Search NASA⌕ Search

SEARCH · Search NASA

Results for “spacecraft providers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Three year orbital trim maneuver performance of the Cassini spacecraft attitude control subsystem.

Cassini is a sophisticated interplanetary spacecraft providing scientific findings that continue to offer insight into our solar system. After arriving at Saturn on June 30, 2004 it has completed three years of a four year prime mission. To date, Cassini has completed 49 orbits about Saturn and over 40 targeted flybys of Saturn’s moons. This has been achieved with a nominal design using three delta-V maneuvers per targeted encounter.

Smith, Brett A.↗
NASA NTRS2020

Impact-driven mobilization of deep crustal brines on dwarf planet Ceres

Ceres, the only dwarf planet in the inner Solar System, appears to be a relict ocean world. Data collected by NASA's Dawn spacecraft provided evidence that global aqueous alteration within Ceres resulted in a chemically evolved body that remains volatile-rich(1). Recent emplacement of bright deposits sourced from brines attests to Ceres being a persistently geologically active world(2,3), but the surprising longevity of this activity at the 92-km Occator crater has yet to be explained. Here, we use new high-resolution Dawn gravity data to study the subsurface architecture of the region surrounding Occator crater, which hosts extensive young bright carbonate deposits (faculae). Gravity data and thermal modelling imply an extensive deep brine reservoir beneath Occator, which we argue could have been mobilized by the heating and deep fracturing associated with the Occator impact, leading to long-lived extrusion of brines and formation of the faculae. Moreover, we find that pre-existing tectonic cracks may provide pathways for deep brines to migrate within the crust, extending the regions affected by impacts and creating compositional heterogeneity. The long-lived hydrological system resulting from the impact might also occur for large impacts in icy moons, with implications for creation of transient habitable niches over time.High-resolution data of Ceres's bright spots (faculae), obtained by Dawn's second extended mission, suggest the existence of a deep brine-rich reservoir that emerged to the surface through long-lived cryovolcanic activity as a consequence of the impact that created Occator crater.

C. A. Raymond↗
NASA NTRS2020

Residual Study: Testing Jupiter Atmosphere Models Against Juno MWR Observations

The Juno spacecraft provides unique close-up views of Jupiter underneath the synchrotron radiation belts while circling Jupiter in its 53-day orbits. The microwave radiometer (MWR) onboard measures Jupiter thermal radiation at wavelengths between 1.37 and 50 cm, penetrating the atmosphere to a pressure of a few hundred bars and greater. The mission provides the first measurements of Jupiter's deep atmosphere, down to ~250 bars in pressure, constraining the vertical distributions of its kinetic temperature and constituents. As a result, vertical structure models of Jupiter's atmosphere may now be tested by comparison with MWR data. Taking into account the MWR beam patterns and observation geometries, we test several published Jupiter atmospheric models against MWR data. Our residual analysis confirms Li et al.'s (2017, https://doi.org/10.1002/2017GL073159) result that ammonia depletion persists down to 50–60 bars where ground-based Very Large Array was not able to observe. We also present an extension of the study that iteratively improves the input model and generates Jupiter brightness temperature maps which best match the MWR data. A feature of Juno's north-to-south scanning approach is that latitudinal structure is more easily obtained than longitudinal, and the creation of optimum two-dimensional maps is addressed in this approach.

Zhimeng Zhang↗
NASA NTRSDate not supplied

Thermal Protection Materials and Systems at NASA Ames Research Center

Thermal Protection Systems (TPS) are critical for enabling NASA missions involving high-speed atmospheric flight where the entries usually include descending into the atmosphere followed by a trajectory that aims to burn off energy and result in a controlled landing. NASA Ames focuses on qualifying and certifying TPS for current missions, sustaining TPS for future missions, and developing new TPS for upcoming missions where a heritage solution is not viable. More recently there is also a focus on advancing and transferring technologies that can benefit both commercial and government space needs. Developing mature thermal protection systems is a lengthy process involving advanced tools, extensive research, and testing. Design and analysis tools are used to predict aerothermal environments, aid the design of test and flight hardware, and support the testing for the thermal/mechanical response of thermal protection systems. More recently, advances in computational methods help reduce the time and cost of technological advances, aid in optimized material architecture design, and improve material properties and performance. While high-enthalpy testing that simulates the conditions of space flight remains essential for the evaluation and development of TPS materials, computational tools are already showing promise in reducing the need for widespread testing and can help fast-track the design cycle. With the exploration of new destinations EDL instrumentation remains an important element of the heatshield and NASA Ames and partners have developed and delivered instrumentation flight hardware in support of recent Mars missions (MSL and M2020) as well as Artemis Orion. Sensors installed on the heatshield and backshell of spacecraft provide coveted information about the aerodynamic and aerothermal environment during entry. Over the years NASA Ames has brought several reusable and ablative TPS materials to a level of readiness to hand off to missions and the branch continues to serve as a TPS steward for the agency. This presentation will cover current developments in the above areas that have enabled recent missions, and look to future TPS needs for missions such as Ice Giants.

thermal protection materials↗
NASA NTRS2022

Special Sensor Microwave Imager/Sounder Updates for the Global Precipitation Measurement V07 Data Suite

Observations from the Special Sensor Microwave Imager/Sounder (SSMIS) onboard the Defense Meteorological Satellite Program F16, F17, F18, and F19 spacecrafts provide a significant portion of the microwave radiometer data within the Global Precipitation Measurement (GPM) mission constellation. In preparation for the GPM Version 7 (V07) data release, SSMIS corrections developed over a decade ago and incorporated in GPM Version 5 (V05) are reexamined and updated. The calibration updates presented here include pointing parameters affecting geolocation and viewing geometry, along-scan bias adjustments to account for scan edge falloffs, and sun angle corrections to account for heating anomalies including an emissive reflector. To address errors in the V05 geolocation, the sensor roll, pitch, yaw, half cone angle, and timing offsets are reanalyzed and updated. The along-scan bias adjustment is updated in a manner consistent with recent Special Sensor Microwave Imager updates to account for variations in scene temperature. Finally, significant improvements to the SSMIS sun angle correction are made by using data from the entire mission, extending the corrections to include the higher frequency channels, and deriving a more consistent channel-to-channel correction. From V05 to V07, the geolocation adjustment is approximately 5-10 km, the earth incidence angle difference is 0-0.4°, and the average brightness temperature change is 0-2 K, but individual pixels may be up to several Kelvin difference depending on sensor and channel. The result of these updates is a significant improvement in the quality and long-term consistency of the SSMIS data that are included in the GPM V07 dataset.

Rachael A Kroodsma↗
NASA NTRSDate not supplied

Thermal Protection Materials and Systems at NASA Ames Research Center

Thermal Protection Systems (TPS) are critical for enabling NASA missions involving high-speed atmospheric flight where the entries usually include descending into the atmosphere followed by a trajectory that aims to burn off energy and result in a controlled landing. NASA Ames focuses on qualifying and certifying TPS for current missions, sustaining TPS for future missions, and developing new TPS for upcoming missions where a heritage solution is not viable. More recently there is also a focus on advancing and transferring technologies that can benefit both commercial and government space needs.Developing mature thermal protection systems is a lengthy process involving advanced tools, extensive research, and testing. Design and analysis tools are used to predict aerothermal environments, aid the design of test and flight hardware, and support the testing for the thermal/mechanical response of thermal protection systems. More recently, advances in computational methods help reduce the time and cost of technological advances, aid in optimized material architecture design, and improve material properties and performance. While high-enthalpy testing that simulates the conditions of space flight remains essential for the evaluation and development of TPS materials, computational tools are already showing promise in reducing the need for widespread testing and can help fast-trackthe design cycle.With the exploration of new destinations EDL instrumentation remains an important element of the heatshield and NASA Ames and partners have developed and delivered instrumentation flight hardware in support of recent Mars missions,including Mars Science Lab (MSL) and Mars 2020 (M2020),as well as Artemis Orion. Sensors installed on the heatshield and backshell of spacecraft provide coveted information about the aerodynamic and aerothermal environment during entry.Overthe years NASA Ames has brought several reusable and ablative TPS materials to a level of readiness to hand off to missions and the Thermal Protection Materials branch continues to serve as a TPS steward for the agency.

Thermal protection materials↗
NASA NTRSDate not supplied

Independent Reliability Assessment of the NASA GSFC Laser Transmitter for the LISA Program

The Laser Interferometer Space Antenna (LISA) is a partnership between the European Space Agency (ESA) and NASA to build a Gravitational Wave (GW) observatory. The observatory, which consists of a three-spacecraft constellation with a nominal separation of 2.5 million km between each spacecraft, provides a tool for scientists to directly detect gravitational waves generated from various astronomical phenomena in a waveband that is not accessible from Earth. NASA is developing laser transmitters as one of the potential US contributions to LISA. The NASA laser design leverages lessons learned from previous flight missions and included the latest technologies in photonics packaging and reliability engineering to ensure a laser lifetime of >16 years covering integration and test through a possible extended mission phase. As part of the laser development process, NASA’s Goddard Space Flight Center (GSFC) requested support from the NASA Engineering and Safety Center (NESC) to independently assess the Technology Readiness Level (TRL) of the LISA Laser System (LS). The independent assessment included the following tasks: (a) assess the design for weaknesses and suggest improvements to mitigate risks, (b) assess the laser reliability plan for weaknesses and suggest improvements to mitigate risks and improve effectiveness, and (c) assess the current redundancy plan on laser subsystems for weaknesses and suggest improvements to mitigate risks and improve effectiveness. The NESC team comprised of a team of subject matter experts (SMEs) and performed a 12-month review of every aspect of the laser design. We present the assessment findings and the current development progress of the LISA laser to meet the mission requirements with a delivery of a form, fit, and functional TRL6 laser to the LSIA mission by late 2023.

LISA↗
NASA NTRS2023

Auroral, Ionospheric and Ground Magnetic Signatures of Magnetopause Surface Modes

Surface waves on Earth's magnetopause have a controlling effect upon global magnetospheric dynamics. Since spacecraft provide sparse in situ observation points, remote sensing these modes using ground-based instruments in the polar regions is desirable. However, many open conceptual questions on the expected signatures remain. Therefore, we provide predictions of key qualitative features expected in auroral, ionospheric, and ground magnetic observations through both magnetohydrodynamic theory and a global coupled magnetosphere-ionosphere simulation of a magnetopause surface eigenmode. These show monochromatic oscillatory field-aligned currents (FACs), due to both the surface mode and its non-resonant Alfvén coupling, are present throughout the magnetosphere. The currents peak in amplitude at the equatorward edge of the magnetopause boundary layer, not the open-closed boundary as previously thought. They also exhibit slow poleward phase motion rather than being purely evanescent. We suggest the upward FAC perturbations may result in periodic auroral brightenings. In the ionosphere, convection vortices circulate the poleward moving FAC structures. Finally, surface mode signals are predicted in the ground magnetic field, with ionospheric Hall currents rotating perturbations by approximately (but not exactly) 90° compared to the magnetosphere. Thus typical dayside magnetopause surface modes should be strongest in the East-West ground magnetic field component. Overall, all ground-based signatures of the magnetopause surface mode are predicted to have the same frequency across L-shells, amplitudes that maximize near the magnetopause's equatorward edge, and larger latitudinal scales than for field line resonance. Implications in terms of ionospheric Joule heating and geomagnetically induced currents are discussed.

M. O. Archer↗
NASA NTRSDate not supplied

Wi-Fi Signal Survey of the International Space Station by Autonomous Free-Flying Robot

This paper analyzes Wi-Fi signal propagation inside pressurized modules of the International Space Station (ISS). Various flight datasets were collected by the Astrobee fleet of autonomous free-flying robots developed by the NASA Ames Research Center (ARC). The enclosed module spaces of the ISS pose unique challenges for Wi-Fi signal propagation, and understanding these challenges is crucial for optimizing connectivity in such environments. The survey data presented are valuable for optimizing wireless access point (WAP) locations and conditions. A computational method is developed to analyze the wireless communication system, RF coverage, and module compositions. The method is both rigorous and practical for assessing the ISS wireless system performance. The computational tools in this paper serve as a complementary approach to direct, on-orbit measurements, which is a complicated and expensive task. In some operational scenarios, ground measurements may be intractable due to the size of the spacecraft. Results from this research will aid future space missions and commercial spacecraft, providing insights into optimal WAP placements and robust wireless communication systems.

Astrobee↗
NASA NTRSDate not supplied

Wi-Fi Signal Survey of the International Space Station by Autonomous Free-Flying Robot

This paper analyzes Wi-Fi signal propagation inside pressurized modules of the International Space Station (ISS). Various flight datasets were collected by the Astrobee fleet of autonomous free-flying robots developed by the NASA Ames Research Center (ARC). The enclosed module spaces of the ISS pose unique challenges for Wi-Fi signal propagation, and understanding these challenges is crucial for optimizing connectivity in such environments. The survey data presented are valuable for optimizing wireless access point (WAP) locations and conditions. A computational method is developed to analyze the wireless communication system, RF coverage, and module compositions. The method is both rigorous and practical for assessing the ISS wireless system performance. The computational tools in this paper serve as a complementary approach to direct, on-orbit measurements, which is a complicated and expensive task. In some operational scenarios, ground measurements may be intractable due to the size of the spacecraft. Results from this research will aid future space missions and commercial spacecraft, providing insights into optimal WAP placements and robust wireless communication systems.

International Space Station↗
NASA NTRS1978

Testing programs for the Multimission Modular Spacecraft

The Multimission Modular Spacecraft (MMS) provides a standard spacecraft bus to a user for a variety of space missions ranging from near-earth to synchronous orbits. The present paper describes the philosophy behind the MMS module test program and discusses the implementation of the test program. It is concluded that the MMS module test program provides an effective and comprehensive customer buy-off at the subsystem contractor's plant, is an optimum approach for checkout of the subsystems prior to use for on-orbit servicing in the Shuttle Cargo Bay, and is a cost-effective technique for environmental testing.

Greenwell, T. J.↗
NASA NTRS1989

Eos mission design utilizing the Space Station platforms

NASA is formulating a program that will encompass many scientific disciplines and involve a large share of the international scientific community in the study of planet earth. The mission is planned for the 1990s and will involve at least four spacecraft: two provided by the NASA and one each provided by European Space Agency (ESA) and Japan. The NASA platforms will utilize elements of the Space Station Freedom program to provide the basic spacecraft engineering subsystems. These subsystems are intended to serve as the basis for future earth orbiting United States spacecraft.

Scolese, Christopher J.↗
NASA NTRS2014

Loads and Structural Dynamics Requirements for Spaceflight Hardware

The purpose of this document is to establish requirements relating to the loads and structural dynamics technical discipline for NASA and commercial spaceflight launch vehicle and spacecraft hardware. Requirements are defined for the development of structural design loads and recommendations regarding methodologies and practices for the conduct of load analyses are provided. As such, this document represents an implementation of NASA STD-5002. Requirements are also defined for structural mathematical model development and verification to ensure sufficient accuracy of predicted responses. Finally, requirements for model/data delivery and exchange are specified to facilitate interactions between Launch Vehicle Providers (LVPs), Spacecraft Providers (SCPs), and the NASA Technical Authority (TA) providing insight/oversight and serving in the Independent Verification and Validation role. In addition to the analysis-related requirements described above, a set of requirements are established concerning coupling phenomena or other interaction between structural dynamics and aerodynamic environments or control or propulsion system elements. Such requirements may reasonably be considered structure or control system design criteria, since good engineering practice dictates consideration of and/or elimination of the identified conditions in the development of those subsystems. The requirements are included here, however, to ensure that such considerations are captured in the design space for launch vehicles (LV), spacecraft (SC) and the Launch Abort Vehicle (LAV). The requirements in this document are focused on analyses to be performed to develop data needed to support structural verification. As described in JSC 65828, Structural Design Requirements and Factors of Safety for Spaceflight Hardware, implementation of the structural verification requirements is expected to be described in a Structural Verification Plan (SVP), which should describe the verification of each structural item for the applicable requirements. The requirement for and expected contents of the SVP are defined in JSC 65828. The SVP may also document unique verifications that meet or exceed these requirements with Technical Authority approval.

George James↗
NASA NTRS1980

IUS solid rocket motor contamination prediction methods

A series of computer codes were developed to predict solid rocket motor produced contamination to spacecraft sensitive surfaces. Subscale and flight test data have confirmed some of the analytical results. Application of the analysis tools to a typical spacecraft has provided early identification of potential spacecraft contamination problems and provided insight into their solution; e.g., flight plan modifications, plume or outgassing shields and/or contamination covers.

Mullen, C. R.↗
NASA NTRS1973

Panoramic attitude sensor for Radio Astronomy Explorer B

An instrument system to acquire attitude determination data for the RAE-B spacecraft was designed and built. The system consists of an electronics module and two optical scanner heads. Each scanner head has an optical scanner with a field of view of 0.7 degrees diameter which scans the sky and measures the position of the moon, earth and sun relative to the spacecraft. This scanning is accomplished in either of two modes. When the spacecraft is spinning, the scanner operates in spherical mode, with the spacecraft spin providing the slow sweep of lattitude to scan the entire sky. After the spacecraft is placed in lunar orbit and despun, the scanner will operate in planar mode, advancing at a rate of 5.12 seconds per revolution in a fixed plane parallel to the spacecraft Z axis. This scan will cross and measure the moon horizons with every revolution. Each scanner head also has a sun slit which is aligned parallel to the spin axis of the spacecraft and which provides a sun pulse each revolution of the spacecraft. The electronics module provides the command and control, data processing and housekeeping functions.

Thomsen, R.↗
NASA NTRS2007

Particle and Smoke Detection on ISS for Next Generation Smoke Detectors

Rapid fire detection requires the ability to differentiate fire signatures from background conditions and nuisance sources. Proper design of a fire detector requires detailed knowledge of all of these signal sources so that a discriminating detector can be designed. Owing to the absence of microgravity smoke data, all current spacecraft smoke detectors were designed based upon normal-g conditions. The removal of buoyancy reduces the velocities in the high temperature zones in flames, increasing the residence time of smoke particles and consequently allowing longer growth time for the particles. Recent space shuttle experiments confirmed that, in some cases, increased particles sizes are seen in low-gravity and that the relative performance of the ISS (International Space Station) and space-shuttle smoke-detectors changes in low-gravity; however, sufficient particle size information to design new detectors was not obtained. To address this issue, the SAME (Smoke Aerosol Measurement Experiment) experiment is manifested to fly on the ISS in 2007. The SAME experiment will make measurements of the particle size distribution of the smoke particulate from several typical spacecraft materials providing quantitative design data for spacecraft smoke detectors. A precursor experiment (DAFT: Dust Aerosol measurement Feasibility Test) flew recently on the ISS and provided the first measurement of the background smoke particulate levels on the ISS. These background levels are critical to the design of future smoke detectors. The ISS cabin was found to be a very clean environment with particulate levels substantially below the space shuttle and typical ground-based environments.

Urban, David L.↗
NASA NTRS2014

Toughened Thermal Blanket for MMOD Protection

Thermal blankets are used extensively on spacecraft to provide passive thermal control of spacecraft hardware from thermal extremes encountered in space. Toughened thermal blankets have been developed that greatly improve protection from hypervelocity micrometeoroid and orbital debris (MMOD) impacts. These blankets can be outfitted if so desired with a reliable means to determine the location, depth and extent of MMOD impact damage by incorporating an impact sensitive piezoelectric film. Improved MMOD protection of thermal blankets was obtained by adding selective materials at various locations within the thermal blanket. As given in Figure 1, three types of materials were added to the thermal blanket to enhance its MMOD performance: (1) disrupter layers, near the outside of the blanket to improve breakup of the projectile, (2) standoff layers, in the middle of the blanket to provide an area or gap that the broken-up projectile can expand, and (3) stopper layers, near the back of the blanket where the projectile debris is captured and stopped. The best suited materials for these different layers vary. Density and thickness is important for the disrupter layer (higher densities generally result in better projectile breakup), whereas a highstrength to weight ratio is useful for the stopper layer, to improve the slowing and capture of debris particles.

Christiansen, Eric L.↗