Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral shape parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Drop Axis Ratio Distributions in Stratiform and Convective Rain

A fully calibrated low profile 2D video disdrometer (2DVD) has been recording many different rainfall events in Northern Alabama (USA) since June 2007. An earlier publication reported drop shapes and axis ratio distributions determined for some of the events. For one of the cases examined, a noticeable shift in the 3.5 - 3.75 mm drop axis ratio distribution was noted. In this paper, we extend the earlier work by separating the 2DVD measurements into stratiform and convective rain. The separation is made possible by using the minute-by-minute drop size distribution (DSD) measured by the 2DVD. The 1-minute DSDs are fitted to a gamma distribution, and using a simple indexing technique which involves two of the fitted parameters, periods of convective and stratiform rain are separated for a given event. The output of the DSD indexing technique is qualitatively confirmed by comparing with simultaneous time series observations from a co-located UHF profiler which continuously records height profiles of reflectivity, Doppler mean and spectral width, all of which enable the identification of bright-band periods and, furthermore, periods of moderate and deep convection. Excellent consistency is found between the output of the DSD-based separation method and the profiler observations. Next, we utilize the output of DSD index-based separation method to flag the periods of severe convection for a given event. Drop axis ratios during the flagged periods are derived and compared with those during stratiform rain periods. Five cases have been considered. Axis ratio distributions do not show appreciable differences between stratiform and convective periods for four of the cases. The fifth case (the same case as reported earlier) shows a shift in the 3.5 - 3.75 mm drop axis ratios during a prolonged period of convection. The contoured shapes for these drops determined from the 2DVD camera data indicate the possibility of non-axisymmetric oscillations, compared with the contoured images for other events which fit well to our reference drop shapes. For all of above cases, observations from a C-band polarimetric radar - situated 15 km away are examined. The variations between the co-polar radar reflectivity and the differential reflectivity as well as the specific differential phase are compared with the 2DVD data based scattering calculations for the 5 events. The implications will be discussed.

Thurai, M.↗
NASA NTRS1982

Acoustically induced oscillation and rotation of a large drop in space

A 2.5 cm diameter water drop was successfully deployed and manipulated in a triaxial acoustic resonance chamber during a 240 sec low-gravity SPAR rocket flight. Oscillation and rotation were induced by modulating and phase shifting the signals to the speakers. Portions of the film record were digitized and analyzed. Spectral analysis brought out the n = 2, 3, 4 free oscillation modes of the drop, its very low-frequency center-of-mass motion in the acoustic potential well, and the forced oscillation frequency. The drop boundaries were least-square fitted to general ellipses, providing eccentricities of the distorted drop. The normalized equatorial area of the rotating drop was plotted vs a rotational parameter, and was in excellent agreement with values derived from the theory of equilibrium shapes of rotating liquid drops.

Jacobi, N.↗
NASA NTRS1998

Multi-Bandwidth Frequency Selective Surfaces for Near Infrared Filtering: Design and Optimization

Frequency selective surfaces are widely used in the microwave and millimeter wave regions of the spectrum for filtering signals. They are used in telecommunication systems for multi-frequency operation or in instrument detectors for spectroscopy. The frequency selective surface operation depends on a periodic array of elements resonating at prescribed wavelengths producing a filter response. The size of the elements is on the order of half the electrical wavelength, and the array period is typically less than a wavelength for efficient operation. When operating in the optical region, diffraction gratings are used for filtering. In this regime the period of the grating may be several wavelengths producing multiple orders of light in reflection or transmission. In regions between these bands (specifically in the infrared band) frequency selective filters consisting of patterned metal layers fabricated using electron beam lithography are beginning to be developed. The operation is completely analogous to surfaces made in the microwave and millimeter wave region except for the choice of materials used and the fabrication process. In addition, the lithography process allows an arbitrary distribution of patterns corresponding to resonances at various wavelengths to be produced. The design of sub-millimeter filters follows the design methods used in the microwave region. Exacting modal matching, integral equation or finite element methods can be used for design. A major difference though is the introduction of material parameters and thicknesses that may not be important in longer wavelength designs. This paper describes the design of multi- bandwidth filters operating in the 1-5 micrometer wavelength range. This work follows on a previous design. In this paper extensions based on further optimization and an examination of the specific shape of the element in the periodic cell will be reported. Results from the design, manufacture and test of linear wedge filters built using microlithographic techniques and used in spectral imaging applications will be presented.

Cwik, Tom↗
NASA NTRS2001

Cloud Spatial Structure and 3D Radiative Transfer

Cloud radiative properties are sensitive to drop size and other parameters of cloud micro-structure, but also to cloud shape, spacing, and other parameters of cloud macro-structure, including internal fractal structure. New information on cloud structure is being derived from a variety of cloud radars and lidars. Ongoing field programs such as DoE/ARM (atmospheric radiation measurement) are improving the measurement and modelling of physical and radiative properties of clouds. A parallel effort is underway to improve cloud remote sensing, especially from the new suite of EOS (Earth observing system) instruments which are beginning to provide higher spectral, spatial resolution, and/or angular resolution. Key parameters for improving pixel-scale retrievals are cloud thickness and photon mean-free-path, which together determine the scale of 'radiative smoothing' of cloud fluxes and radiances. This scale has been observed as a change in the spatial spectrum of Landsat cloud radiances, and was also recently found with the Goddard micropulse lidar, by searching for returns from directions nonparallel to the incident beam. 'Offbeam' Lidar returns are now being used to estimate the cloud 'radiative Green's function' (G). G depends on cloud thickness and may be used to retrieve that important quantity. G is also being applied to improving simple estimates of cloud radiative properties that are based on the 'Independent Pixel Approximation' or IPA. This and other measurements of 3D (three dimensional) transfer in clouds, coupled with Monte Carlo and other 3D transfer methods, are beginning to provide a better understanding of the dependence of radiation on cloud inhomogeneity, and to suggest new retrieval and parameterization algorithms which take account of cloud inhomogeneity. An international 'Intercomparison of 3D Radiation Codes' (I3RC) program is underway to coordinate and evaluate the variety of 3D radiative transfer methods now available, and to make them more widely available. Information is on the Web at: http://climate.gsfc.nasa.gov/I3RC. Input consists of selected cloud fields derived from data sources such as radar, microwave and satellite, and from models involved in the GEWEX Cloud Systems Studies. Output is selected radiative quantities that characterize the large-scale properties of the fields of radiative fluxes and heating. Several example cloud fields will be used to illustrate the effects of cloud inhomogeneity and 3D radiation.

Cahalan, Robert F.↗
NASA NTRS2011

A Sensitivity Study on the Effects of Particle Chemistry, Asphericity and Size on the Mass Extinction Efficiency of Mineral Dust in the Earth's Atmosphere: From the Near to Thermal IR

To determine a plausible range of mass extinction efficiencies (MEE) of terrestrial atmospheric dust from the near to thermal IR, sensitivity analyses are performed over an extended range of dust microphysical and chemistry perturbations. The IR values are subsequently compared to those in the near-IR, to evaluate spectral relationships in their optical properties. Synthesized size distributions consistent with measurements, model particle size, while composition is defined by the refractive indices of minerals routinely observed in dust, including the widely used OPAC/Hess parameterization. Single-scattering properties of representative dust particle shapes are calculated using the T-matrix, Discrete Dipole Approximation and Lorenz-Mie light-scattering codes. For the parameterizations examined, MEE ranges from nearly zero to 1.2 square meters per gram, with the higher values associated with non-spheres composed of quartz and gypsum. At near-IR wavelengths, MEE for non-spheres generally exceeds those for spheres, while in the thermal IR, shape-induced changes in MEE strongly depend on volume median diameter (VMD) and wavelength, particularly for MEE evaluated at the mineral resonant frequencies. MEE spectral distributions appear to follow particle geometry and are evidence for shape dependency in the optical properties. It is also shown that non-spheres best reproduce the positions of prominent absorption peaks found in silicates. Generally, angular particles exhibit wider and more symmetric MEE spectral distribution patterns from 8-10 micrometers than those with smooth surfaces, likely due to their edge-effects. Lastly, MEE ratios allow for inferring dust optical properties across the visible-IR spectrum. We conclude the MEE of dust aerosol are significant for the parameter space investigated, and are a key component for remote sensing applications and the study of direct aerosol radiative effects.

Hansell, R. A., Jr.↗
NASA NTRS2019

Cloud Remote Sensing with EPIC/DSCOVR Observations: A Sensitivity Study with Radiative Transfer Simulations

The Earth Polychromatic Imaging Camera (EPIC) onboard the Deep Space Climate Observatory (DSCOVR) views nearly the whole sunlit face of the Earth with 10 spectral bands ranging from the UV to the near-infrared, including two oxygen absorbing bands centered at 764 nm (A-band) and 687.75 nm (B-band). Clouds are among the primary remote sensing targets using EPIC images because of their important impacts on the Earth’s radiation budget. In order to facilitate the EPIC cloud data product development, we have built a radiative transfer simulator featuring flexible cloud microphysical parameters, gas absorptions, and the instrument line shape functions for each EPIC band. The radiative transfer simulator is used to explore the sensitivity of EPIC observations on liquid-phase cloud microphysical parameters, including optical depth, geometric thickness, and cloud top height. We found that the ratios of the reflectances in the oxygen A and B bands to their respective continuum measurements can be used to increase the confidence level of cloud masking over scenes with sun-glint. In addition, the 388 nm band can be used to differentiate low and high clouds with the uncertainty of roughly 2–3 km. Combining this information with the oxygen absorption bands, the cloud geometric thickness can be obtained with the rough uncertainty of 3–4 km.

atmospheric and ocean optics↗
DOE OSTI2026

Photoluminescence line shapes of nanocrystals: Contributions from first- and second-order vibronic couplings

Here, we present a microscopic, parameter-free approach for computing the photoluminescence spectra of a single semiconductor nanocrystal. The method derives exciton–phonon coupling directly from the semi-empirical pseudopotential framework and systematically incorporates both diagonal and off-diagonal exciton-phonon interactions, expanded to second-order in the phonon coordinates. The dipole–dipole correlation function was calculated using a Dyson expansion within the Kubo–Toyozawa formalism, enabling a consistent description of the role of pure dephasing and population transfer on the photoluminescence spectral features. Applied to CdSe/CdS core–shell nanocrystals, the approach quantitatively reproduces experimental photoluminescence spectra over a wide temperature range, revealing that quadratic phonon couplings account for nearly half of the homogeneous linewidth above ≈ 100−150 K, while off-diagonal couplings leading to exciton thermalization play only a minor role and only as T → 300 K.

Dephasing Rate↗
NASA NTRS2015

Photopolarimetric Retrievals of Snow Properties

Polarimetric observations of snow surfaces, obtained in the 410-2264 nm range with the Research Scanning Polarimeter onboard the NASA ER-2 high-altitude aircraft, are analyzed and presented. These novel measurements are of interest to the remote sensing community because the overwhelming brightness of snow plagues aerosol and cloud retrievals based on airborne and spaceborne total reflection measurements. The spectral signatures of the polarized reflectance of snow are therefore worthwhile investigating in order to provide guidance for the adaptation of algorithms currently employed for the retrieval of aerosol properties over soil and vegetated surfaces. At the same time, the increased information content of polarimetric measurements allows for a meaningful characterization of the snow medium. In our case, the grains are modeled as hexagonal prisms of variable aspect ratios and microscale roughness, yielding retrievals of the grains' scattering asymmetry parameter, shape and size. The results agree with our previous findings based on a more limited data set, with the majority of retrievals leading to moderately rough crystals of extreme aspect ratios, for each scene corresponding to a single value of the asymmetry parameter.

aspect ratio↗
NASA NTRS2020

Proposed Recommendation for DDOR PN Spread Spectrum Systems

Currently, instrumental phase dispersion is a large error term in the Delta-Differential One-way Ranging (DDOR) error budget. This error arises from the spectral difference between the narrowband spacecraft signal and the broadband quasar signal. This error term can be reduced in modern transponders by implementing a pseudo-noise (PN) spread spectrum DOR signal instead of the classic sinusoidal DOR signal. To standardize PN DDOR cross-support, this paper proposes the definitions and specifications required to support a PN DDOR system. The motivation for PN DDOR is first presented. Then, informational background is presented on code selection, pulse shaping, and code parameters. Finally, Appendix A presents a new proposed Recommendation 2.5.7B for Spread Spectrum DDOR, to be included in CCSDS 401.

Volk, Christopher P↗
DOE OSTI2024

Energy-dependent flavour ratios in neutrino telescopes from charm

Abstract The origin of the observed diffuse neutrino flux is not yet known. Studies of the relative flavour content of the neutrino flux detected at Earth can give information on the production mechanisms at the sources and on flavour mixing, complementary to measurements of the spectral index and normalization. Here we demonstrate the effects of neutrino fluxes with different spectral shapes and different initial flavour compositions dominating at different energies, and we study the sensitivity of future measurements with the IceCube Neutrino Observatory. Where one kind of flux gives way to another, this shows up as a non-trivial energy dependence in the flavour compositions. We explore this in the context of slow-jet supernovae and magnetar-driven supernovae — two examples of astrophysical sources where charm production may be effective. Using current best-fit neutrino mixing parameters and the projected 2040 IceCube uncertainties, we use event ratios of different event morphologies at IceCube to illustrate the possibilities of distinguishing the energy dependence of neutrino flavour ratios.

Astronomy & Astrophysics↗
DOE OSTI2021

Solid-Density Ion Temperature from Redshifted and Double-Peaked Stark Line Shapes

Heβ spectral line shapes are important for diagnosing temperature and density in many dense plasmas. This work presents Heβ line shapes measured with high spectral resolution from solid-density plasmas with minimized gradients. The line shapes show hallmark features of Stark broadening, including quantifiable redshifts and double-peaked structure with a significant dip between the peaks; these features are compared to models through a Markov chain Monte Carlo framework. Line shape theory using the dipole approximation can fit the width and peak separation of measured line shapes, but it cannot resolve an ambiguity between electron density n e and ion temperature T i , since both parameters influence the strength of quasistatic ion microfields. Here a line shape model employing a full Coulomb interaction for the electron broadening computes self-consistent line widths and redshifts through the monopole term; redshifts have different dependence on plasma parameters and thus resolve the n e – T i ambiguity. The measured line shapes indicate densities that are 80–100% of solid, identifying a regime of highly ionized but well-tamped plasma. This analysis also provides the first strong evidence that dense ions and electrons are not in thermal equilibrium, despite equilibration times much shorter than the duration of x-ray emission; cooler ions may arise from nonclassical thermalization rates or anomalous energy transport. Furthermore, the experimental platform and diagnostic technique constitute a promising new approach for studying ion-electron equilibration in dense plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

time-resolved spectroscopy fit (trspecfit) v0.01

Analyze 2D time- and energy-resolved data, such as from a pump-probe spectroscopy experiment. User can select and input different peak shapes/ functions and background types to first fit a ground state/ unperturbed spectrum. This would be similar to how standard spectroscopy data is fit. Subsequently, to describe the time domain, users can choose functions that describe the temporal dynamics of one or more spectral features, such as a peak amplitude, peak position, etc. These time dynamics functions can be added or convoluted (e.g. describing an instrument response function) with each other. Functionality to integrate implicit variables leading to distributions of certain parameters/ functions is in development. Alternatively, 2D data can be analyzed one time step at a time to get an idea of the time dynamics of the system before deploying the global 2D fit described above. Typically people write custom software for this purpose. During my PhD I've seen five internal LBL and external researchers write one-off code in different languages to analyze time- and energy-resolved spectra. While this was specifically was for a laser pump - X-ray probe spectroscopy experiment, I'm trying to write a general package for the time-resolved spectroscopy community.

Mahl, Johannes [Lawrence Berkeley National Laborat↗
NASA NTRS2010

Analysis of Snow Bidirectional Reflectance from ARCTAS Spring-2008 Campaign

The spring 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) experiment was one of major intensive field campaigns of the International Polar Year aimed at detailed characterization of atmospheric physical and chemical processes in the Arctic region. A part of this campaign was a unique snow bidirectional reflectance experiment on the NASA P-3B aircraft conducted on 7 and 15 April by the Cloud Absorption Radiometer (CAR) jointly with airborne Ames Airborne Tracking Sunphotometer (AATS) and ground-based Aerosol Robotic Network (AERONET) sunphotometers. The CAR data were atmospherically corrected to derive snow bidirectional reflectance at high 1 degree angular resolution in view zenith and azimuthal angles along with surface albedo. The derived albedo was generally in good agreement with ground albedo measurements collected on 15 April. The CAR snow bidirectional reflectance factor (BRF) was used to study the accuracy of analytical Ross-Thick Li-Sparse (RTLS), Modified Rahman-Pinty-Verstraete (MRPV) and Asymptotic Analytical Radiative Transfer (AART) BRF models. Except for the glint region (azimuthal angles phi less than 40 degrees), the best fit MRPV and RTLS models fit snow BRF to within 0.05. The plane-parallel radiative transfer (PPRT) solution was also analyzed with the models of spheres, spheroids, randomly oriented fractal crystals, and with a synthetic phase function. The latter merged the model of spheroids for the forward scattering angles with the fractal model in the backscattering direction. The PPRT solution with synthetic phase function provided the best fit to measured BRF in the full range of angles. Regardless of the snow grain shape, the PPRT model significantly over-/underestimated snow BRF in the glint/backscattering regions, respectively, which agrees with other studies. To improve agreement with experiment, we introduced a model of macroscopic snow surface roughness by averaging the PPRT solution over the slope distribution function and by adding a simple model of shadows. With macroscopic roughness described by two parameters, the AART model achieved an accuracy of about plus or minus 0.05 with a possible bias of plus or minus 0.03 in the spectral range 0.4-2.2 micrometers. This high accuracy holds at view zenith angles below 55-60 degrees covering the practically important range for remote sensing applications, and includes both glint and backscattering directions.

Lyapustin, A.↗
NASA NTRS1991

Surface scattering properties estimated from modeling airborne multiple emission angle reflectance data

Here, researchers apply the Hapke function to airborne bidirectional reflectance data collected over three terrestrial surfaces. The objectives of the study were to test the range of natural surfaces that the Hapke model fits and to evaluate model parameters in terms of known surface properties. The data used are multispectral and multiple emission angle data collected during the Geologic Remote Sensing Field Experiment (GRSFE) over a mud-cracked playa, an artificially roughened playa, and a basalt cobble strewn playa at Lunar Lake Playa in Nevada. Airborne remote sensing data and associated field measurements were acquired at the same time. The airborne data were acquired by the Advanced Solid State Array Spectroradiometer (ASAS) instrument, a 29-spectral band imaging system. ASAS reflectance data for a cobble-strewn surface and an artificially rough playa surface on Lunar Lake Playa can be explained with the Hanke model. The cobble and rough playa sites are distinguishable by a single scattering albedo, which is controlled by material composition; by the roughness parameter, which appears to be controlled by the surface texture and particle size; and the symmetry factor of the single particle phase function, which is controlled by particle size and shape. A smooth playa surface consisting of compacted, fine-grained particles has reflectance variations that are also distinct from either the cobble site or rough playa site. The smooth playa appears to behave more like a Lambertian surface that cannot be modeled with the Hapke function.

Guinness, Edward A.↗
NASA NTRS2018

Derivation of Vertical Profiles of Droplet Size in Cumulus Clouds from Passive Remote Sensing Observations by the Research Scanning Polarimeter

The Research Scanning Polarimeter (RSP) is an airborne along-track scanner measuring the polarized and total reflectance in 9 spectral channels. Its uniquely high angular resolution allows for characterization of liquid water cloud droplet sizes using the rainbow structure observed in the polarized reflectance over the scattering angle range from 135 to 165 degrees. Such an angular resolution coupled with high frequency of the RSP measurements also allows for geometric constraint of the cumulus cloud's 2D cross section between a number of tangent lines of view, thus, providing estimates of the macroscopic parameters of the cloud, such as its geometric shape, dimensions, and height above the ground.

Alexandrov, Mikhail D.↗
DOE OSTI2020

Two-color-driven enhanced high-order harmonic generation in solids

We theoretically investigate the emission of high-harmonic (HH) radiation in model crystals by bichromatic few-cycle driving pulses that are composed as the phase-coherent superposition of a mid-infrared fundamental pulse and its second harmonic. Adjusting the model-crystal parameters to reproduce the lowest band gap of MgO, we examine the extent to which distinct domains of the HH spectrum can be controlled and enhanced by tuning the temporal profile of the bichromatic driving laser electric field. We change the driving-pulse shape by varying its fundamental-versus-second-harmonic pulse amplitude ratio and delay, while keeping the energy of the driving laser pulse fixed. For suitable amplitude ratios and delays, we find an up to fivefold enhancement of the spectral HH yield and significant shifts of the HH cutoff frequency.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Temperature-dependent phonon lifetimes and thermal conductivity of silicon by inelastic neutron scattering and ab initio calculations

In this paper, inelastic neutron scattering on a single crystal of silicon was performed at temperatures from 100 to 1500 K. These experimental data were reduced to obtain phonon spectral intensity at all wave vectors $\overset{→}{Q}$ and frequencies ω in the first Brillouin zone. Thermal broadenings of the phonon peaks were obtained by fitting and by calculating with an iterative ab initio method that uses thermal atom displacements on an ensemble of superlattices. Agreement between the calculated and experimental broadenings was good, with possible discrepancies at the highest temperatures. Distributions of phonon widths versus phonon energy had similar shapes for computation and experiment. These distributions grew with temperature but maintained similar shapes. Parameters from the ab initio calculations were used to obtain the thermal conductivity from the Boltzmann transport equation, which was in good agreement with experimental data. Despite the high group velocities of longitudinal acoustic phonons, their shorter lifetimes reduced their contribution to the thermal conductivity, which was dominated by transverse acoustic modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1999

Multi-Bandwidth Frequency Selective Surfaces for Near Infrared Filtering: Design and Optimization

Frequency selective surfaces are widely used in the microwave and millimeter wave regions of the spectrum for filtering signals. They are used in telecommunication systems for multi-frequency operation or in instrument detectors for spectroscopy. The frequency selective surface operation depends on a periodic array of elements resonating at prescribed wavelengths producing a filter response. The size of the elements is on the order of half the electrical wavelength, and the array period is typically less than a wavelength for efficient operation. When operating in the optical region, diffraction gratings are used for filtering. In this regime the period of the grating may be several wavelengths producing multiple orders of light in reflection or transmission. In regions between these bands (specifically in the infrared band) frequency selective filters consisting of patterned metal layers fabricated using electron beam lithography are beginning to be developed. The operation is completely analogous to surfaces made in the microwave and millimeter wave region except for the choice of materials used and the fabrication process. In addition, the lithography process allows an arbitrary distribution of patterns corresponding to resonances at various wavelengths to be produced. The design of sub-millimeter filters follows the design methods used in the microwave region. Exacting modal matching, integral equation or finite element methods can be used for design. A major difference though is the introduction of material parameters and thicknesses tha_ may not be important in longer wavelength designs. This paper describes the design of multi-bandwidth filters operating in the I-5 micrometer wavelength range. This work follows on previous design [1,2]. In this paper extensions based on further optimization and an examination of the specific shape of the element in the periodic cell will be reported. Results from the design, manufacture and test of linear wedge filters built using micro-lithographic techniques and used ir spectral imaging applications will be presented.

Cwik, Tom↗