Search NASA⌕ Search

SEARCH · Search NASA

Results for “stacking method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A multiscale model to understand the interface chemistry, contacts, and dynamics during lithium stripping

A reversible Li-metal electrode, paired with a solid electrolyte, is critical for attaining higher energy density and safer batteries beyond the current lithium-ion cells. A stable stripping process may be even harder to attain as the stripping process will remove Li-atoms from the surface, and naturally reduce surface contact area, if not self-corrected by other mechanisms, such as diffusion and plastic deformation under an applied external stack pressure. Here, we capture these mechanisms occurring at multiple length- and time- scales, i.e., interface interactions, vacancy hopping, and plastic deformation, by integrating density functional theory (DFT) simulations, kinetic Monte Carlo (KMC), and continuum finite element method (FEM). By assuming the self-affine nature of multiscale contacts, we predict the steady-state contact area as a function of stripping current density, interface wettability, and stack pressure. We further estimate the exponential increase of overpotential due to contact area loss to maintain the same stripping current density. We demonstrate that a lithiophilic interface requires less stack pressure to reach the same steady-state contact area fraction than a lithiophobic interface. A “tolerable steady-state” contact area loss for maintaining stable stripping is estimated at 20 %, corresponding to a 10 % increase in overpotential. To constrain contact loss within the tolerance, the required stack pressure is 0.1, 0.5, and 2 times the yield strength of lithium metal for three distinct interfaces, lithiophilic Li/lithium oxide(Li2O), Li/lithium lanthanum zirconium oxide(LLZO), and lithiophoblic Li/lithium fluoride(LiF), respectively. The modeling results agree with experiments on the impact of the stack pressure quantitatively, while the discrepancy in stripping rate sensitivity is attributed to the simplifying interface interaction in our simulations. Overall, this multiscale simulation framework demonstrates the importance of electrochemical-mechanical coupling in understanding the dynamics of the Li/SE interface during stripping.

Feng, Min↗
DOE OSTI2023

ORNL_AISD-Ex: Quantum chemical prediction of UV/Vis absorption spectra for over 10 million organic molecules

We performed calculations of electronic excitation energies and associated oscillator strengths based on the time-dependent density-functional tight-binding (TD-DFTB) method [1]. The SMILES (Simplified molecular-input line-entry system) strings of the molecules from the AISD HOMO-LUMO database [2] were converted to a 3D atomistic structure and stored in a PDB file after preliminary geometry optimization using the Merck Molecular Force Field (MMFF94) in RDKit [3,4]. The primary information stored in the PDB file archive consists of Cartesian coordinates for each atom of the molecule in their 3D location in space, along with summary information about the structure, sequence, and experiment. We then performed molecular geometry optimization using the density-functional tight-binding (DFTB) method [5] in the electronic ground state, followed by single-point excited states calculations, as described below. We note that, since RDKit employs a random choice for the generation of molecular conformers, the molecular geometries obtained in this dataset could be different from the ones that were generated when the AISD HOMO-LUMO dataset was generated. The computed excitation energies and associated oscillator strengths can be converted to predict UV/Vis absorption spectra, where excitation energies correspond to absorption peak positions, and oscillator strengths are a good measure of the probability of absorption of visible or UV light in transitions between electronic ground and excited states. The conversion of SMILES strings to 3D Cartesian coordinates of fully DFTB-optimized molecules was successful for 10,502,904 out of 10,502,917 molecules. For these molecules, both geometry optimizations and excited states calculations were successful. The DFTB calculations did not complete for 13 molecules of the original AISD HOMO-LUMO dataset. We still provide information about the geometry of these molecules. The molecules are diverse for chemical compositions (which span 5 non-hydrogen elements: oxygen, carbon, nitrogen, fluorine, sulfur) and molecular size (the smallest molecule contains 5 non-hydrogen atoms, and the largest molecule contains 71 non-hydrogen atoms). The DFTB method [5] is an approximation to density functional theory (DFT), utilizing a minimal basis set in conjunction with a two-center approximation to the electronic Hamiltonian and overlap matrix elements. The DFTB total energy is the sum of an electronic and a repulsive energy contribution, and their calculation requires optimized electronic parameters and diatomic repulsive potential energy functions. All DFTB calculations were performed using the DFTB+ code [6] (version 21.2) and the wrapper for DFTB+ in the Atomic Simulation Environment (ASE) (version 3.22.1) [7], which performed an internal conversion of Cartesian coordinates from PDB to the .gen file format. For the geometry optimizations on the electronic ground state potential energy surface of the molecules, we have chosen the third-order DFTB (DFTB3) method [5c] and employed the matching 3ob set of electronic parameters and repulsive potentials [8]. The empirical γ-damping for hydrogen bond correction, and Grimme's D3 empirical dispersion correction with Becke-Johnson damping (D3(BJ)) [9] dispersion correction was included to improve the description of non-covalent interactions. For excited states single-point energy calculations, we employed the TD-DFTB method in conjunction with the DFTB2 method [5b] and the matching mio [5b,10] and halorg [11] parameter sets. We opted to request the simultaneous calculation of 50 excited states for singlet transition to investigate sufficient number of excited states, based on linear response theory using the Casida equation [Ref: T. A. Niehaus, S. Suhai, F. Della Sala, P Lugli, M. Elstner, G. Seifert, and Th. Frauenheim. Tight-binding approach to time-dependent density-functional response theory. Phys. Rev. B, 63:085108, 2001] and the ARPACK diagonalizer [R. B. Lehoucq, D. C. Sorensen, and C. Yang. Arpack users guide: Solution of large-scale eigenvalue problems by implicitly restarted arnoldi methods, 1997. 46, 51]. The dataset contains 1001 tar.gz files. Tar files are named as “ornl_aisd_ex_1.tar.gz†through “ornl_aisd_ex_1000.tar.gzâ€. Additionally, the 13 failed molecules are in “ornl_aisd_ex_unprocessed.tar.gzâ€. Except for the tar files listed below, each tar file contains 10,500 molecules. Tar files numbered 34, 121, 128, 352, 360, 429, 495, 509, 518, 627, 676, 668, and 862 contain 10,499 molecules each. The last tar file numbered 1000 contains 13,417 molecules. The total size of the uncompressed dataset is over 283 Gigabytes. The code for calculating the electronic excitation energies and statistical analysis of the dataset is provided at the following GitLab repository: https://github.com/ORNL/Analysis-of-Large-Scale-Molecular-Datasets-with-Python Calculating the UV spectrum of a molecule requires performing 3 main operations: 1. Converting the smiles string representation of a molecule into a geometric structure where each atom is assigned XYZ coordinates. The geometric structure is written to the file smiles.pdb. 2. Using smiles.pdb to compute the relaxed geometry of the molecule, which corresponds with the position of the atoms at the position of equilibrium at the ground state. This generates the files band.out, detailed.out, and geo_end.gen. 3. Using geo_end.gen to calculate the UV spectrum of the molecule which is written into the file EXC.DAT. Every molecule in the dataset has its own directory. The files contained in each molecule directory are as follows: 1. geo_end.gen 2. detailed.out 3. band.out 4. EXC.DAT 5. smiles.pdb REFERENCES [1] Niehaus, T. A.; Suhai, S.; Della Salla, F.; Lugli, P.; Elstner, M.; Seifert, G.; Frauenheim, Th. Tight-binding approach to time-dependent density-functional response theory. Phys. Rev. B, 2001, 63, 085108/1-9. [2] Blanchard, A.; Gounley, J.; Metha, K.; Yoo, P.; Irle, S. AISD HOMO-LUMO. DOI: 10.13139/ORNLNCCS/1869409 [3] RDKit: Cheminformatics and Machine Learning Software. 2013, [http://www.rdkit.org] [4] Tosco, P.; Stiefl, N. and Landrum, G. Bringing the MMFF force field to the RDKit: implementation and validation. J Cheminform. 2014, 6, 1–4. [5] a) Porezag, D.; Frauenheim, T.; Kohler, T.; Seifert, G.; Kaschner, Construction of tight-binding-like potentials on the basis of density-functional theory: Application to carbon, R. Phys. Rev. B 1995, 51, 12947-12957; b) Elstner, M.; Porezag, D.; Jungnickel, G.; Elsner, J.; Haugk, M.; Frauenheim, Th.; Suhai, S.; Seifert, G.; Phys. Rev. B 1998, 58, 7260-7268; c) Gaus, M.; Cui, Q.; Elstner, M. DFTB3: Extension of the Self-Consistent-Charge Density-Functional Tight-Binding Method (SCC-DFTB), J. Chem. Theory Comput. 2011, 7, 931-948; d) Cui, Q.; Elstner, M. Density functional tight binding: values of semi-empirical methods in an ab initio era, Phys. Chem. Chem. Phys. 2014, 16, 14368-14377. [6] Hourahine, B. et al. DFTB+, a software package for efficient approximate density functional theory based atomistic simulations, J. Chem. Phys. 2020, 152, 124101/1-19. [7] Larsen, A. H. et al. The atomic simulation environment—a Python library for working with atoms. J. Phys.: Cond. Matter 2017, 29, 273002. [8] Kubillus, M.; Kubar, T.; Gaus, M.; Rezac, J.; Elstner, M. Parameterization of the DFTB3 Method for Br, Ca, Cl, F, I, K, and Na in Organic and Biological Systems, J. Chem. Theory Comput. 2015, 11, 332-342. [9] Brandenburg, J. G.; Grimme, S. Accurate Modeling of Organic Molecular Crystals by Dispersion-Corrected Density Functional Tight Binding (DFTB), J. Phys. Chem. Lett. 2014, 5, 1785−1789. [10] a) Niehaus, T. A.; Elstner, M.; Frauenheim, Th.; Suhai, S. Application of an approximate density-functional method to sulfur containing compounds. J. Mol. Struct.: THEOCHEM 2001, 541, 185-94; b) Elstner, M.; Hobza, P.; Frauenheim, Th.; Suhai, S.; Kaxiras, E. Hydrogen bonding and stacking interactions of nucleic acid base pairs: A density-functional-theory based treatment. J. Chem. Phys. 2001, 114, 5149-55. [11] Kubar, T.; Bodrog, Z.; Gaus, M.; Köhler, C.; Aradi, B.; Frauenheim, Th.; Elstner, M. Parametrization of the SCC-DFTB Method for Halogens. J. Chem. Theory Comput. 2013, 9, 2939-49.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Long-exposure NuSTAR constraints on decaying dark matter in the Galactic halo

Here, we present two complementary NuSTAR x-ray searches for keV-scale dark matter decaying to monoenergetic photons in the Milky Way halo. In the first, we utilize the known intensity pattern of unfocused stray light across the detector planes—the dominant source of photons from diffuse sources—to separate astrophysical emission from internal instrument backgrounds using ~7- Ms/detector deep blank-sky exposures. In the second, we present an updated parametric model of the full NuSTAR instrument background, allowing us to leverage the statistical power of an independent ~20-Ms/detector stacked exposures spread across the sky. Finding no evidence of anomalous x-ray lines using either method, we set limits on the active-sterile mixing angle sin 2 ⁡(2⁢θ) for sterile-neutrino masses 6–40 keV. The first key result is that we strongly disfavor a ~7-keV sterile neutrino decaying into a 3.5-keV photon. The second is that we derive leading limits on sterile neutrinos with masses ~15–18 keV and ~25–40 keV, reaching or extending below the big bang nucleosynthesis limit. In combination with previous results, the parameter space for the neutrino minimal standard model is now nearly closed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

From Femtoseconds to Gigaseconds: The SolDeg Platform for the Performance Degradation Analysis of Silicon Heterojunction Solar Cells

Heterojunction Si solar cells exhibit notable performance degradation. Here, we modeled this degradation by electronic defects getting generated by thermal activation across energy barriers over time. To analyze the physics of this degradation, we developed the SolDeg platform to simulate the dynamics of electronic defect generation. First, femtosecond molecular dynamics simulations were performed to create a-Si/c-Si stacks, using the machine learning-based Gaussian approximation potential. Second, we created shocked clusters by a cluster blaster method. Third, the shocked clusters were analyzed to identify which of them supported electronic defects. Fourth, the distribution of energy barriers that control the generation of these electronic defects was determined. Fifth, an accelerated Monte Carlo method was developed to simulate the thermally activated time-dependent defect generation across the barriers. Our main conclusions are as follows. (1) The degradation of a-Si/c-Si heterojunction solar cells via defect generation is controlled by a broad distribution of energy barriers. (2) We developed the SolDeg platform to track the microscopic dynamics of defect generation across this wide barrier distribution and determined the time-dependent defect density N(t) from femtoseconds to gigaseconds, over 24 orders of magnitude in time. (3) We have shown that a stretched exponential analytical form can successfully describe the defect generation N(t) over at least 10 orders of magnitude in time. (4) We found that in relative terms, Voc degrades at a rate of 0.2%/year over the first year, slowing with advancing time. (5) We developed the time correspondence curve to calibrate and validate the accelerated testing of solar cells. We found a compellingly simple scaling relationship between accelerated and normal times t normal ∝ t accel T(accel)/T(normal) . (6) We also carried out experimental studies of defect generation in a-Si:H/c-Si stacks. We found a relatively high degradation rate at early times that slowed considerably at longer time scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Robust Predictive Control for Modular Solid-State Transformer With Reduced DC Link and Parameter Mismatch

This paper presents the analysis and implementation of a predictive control method for dc-link regulation and voltage balance in a cascaded modular reduced dc-link solid-state transformer (SST). Passive components like bulky dc links limit the power density of power converters, especially medium-voltage (MV) SST. Reduced dc-link or low-inertia converters can dramatically reduce the size, cost, and weight by tolerating larger dc-link ripples and improve the reliability with electrolytic capacitor-less dc link. However, a small dc link leads to tight coupling between the input and the output stages, which is a challenge for control design. In stacked low-inertia converters (SLIC), the low-inertia converter modules are stacked for MV applications, resulting in coupling between the modules and making the control more challenging. A new model predictive control method which can achieve deadbeat regulation on the dc link without weighting factors has been proposed to address this novel problem. This paper focuses on analyzing the condition of the low-inertia dc link up to 80% ripple, the robustness of the control under parameter mismatches, high-order terms, and important implementation issues such as model-based sampling and computation delay compensation. Significantly, the high-order terms are introduced because of the large dc-link ripple. These high-order terms are unique to the SLIC and negligible in conventional high-inertia converters. A discrete-time large-signal model is built to capture the dc-link’s nonlinear dynamics, and the eigenvalues of a small-signal Jacobian matrix are analyzed with Floquet theory to evaluate stability, using the modular soft-switching solid-state transformer (M-S4T) as an example of the SLIC. Simulation and experimental results of an MVDC M-S4T verify the analysis and the predictive control method. Finally, the general application of the predictive control to low-inertia converters is compared against a conventional PI controller using a reduced dc-link active-front-end (AFE) rectifier as an example.

14 SOLAR ENERGY↗
DOE OSTI2021

High Throughput In-Line Coating Metrology Development for Solid Oxide Fuel Cell Manufacturing

Coatings play key roles in solid oxide fuel cell (SOFC) stack durability. For example, diffusion barrier coatings on Cr-containing interconnect and balance of plant (BOP) components protect electrodes from Cr poisoning over the long operational lifetimes (>10,000 hours) of the fuel cell stack. Common defects in coatings, such as cracks, pinholes, and porosity, result in a failure to protect the electrodes, resulting in shorter operational lifetime and thus higher cost. It is very unlikely, even in the best coating process, that all these defects can be mitigated, hence identifying critical defects in parts, and removing defective parts from production before they can damage the stack, becomes paramount. Furthermore, these quality control techniques must be operational in the production/assembly line (in-line), i.e., high throughput and non-destructive, and cost effective. Redox Power Systems, LLC (Redox) together with the National Renewable Energy Laboratory (NREL) developed much needed high throughput, in-line metrology techniques for protective coatings. The overall goal of the project is to lower cost while increasing robustness, reliability, and endurance of SOFC stacks. To accomplish this, we had several objectives, including: to identify key coating and substrate defects that lead to coating failure through the use of detailed characterization methods (e.g., microscopy, XRD, EDS, electrochemistry); to assess capabilities of in-line metrology techniques, e.g., optical profilometry (Redox) and thermography (NREL), to probe these defects, or evidence thereof; demonstrate long-term performance of “defect-free” protective coatings, as identified by in-line metrology, in solid oxide fuel cell (SOFC) stack operation. In the first part of this project, the ability to identify key defects expected to lead to coating and SOFC degradation using in-line metrology tools were evaluated. Coated interconnect samples with controlled defect types and populations were tested under conditions similar to SOFC operation, followed by detailed post-test analysis to reveal the defects responsible for observed degradation. In the second part of the project, the optimal in-line metrology techniques and methodologies were used to map the defect distribution in full-size interconnects with critical defects intentionally allowed to exist in some cases. These interconnects underwent SOFC testing for extended periods (up to ~3,000 hours) followed by post-test analysis to evaluate the effectiveness of in-line metrology techniques in mitigating MCO coating related degradation. Key accomplishments in this project included the following: Demonstrated ASR of < 0.05 ohm-cm 2 at 650 °C for 1,000 hours with low defect (determined by in-line metrology) interconnect samples (average ASR=37 milliohms-cm 2 after over 1,000 hours). Demonstrated that low defect coatings on interconnects (as screened using in-line metrology) have low volatilization of chromium at ~650 °C for 1,000 hours as detected using Cr-getter material (< 5 at% increase above baseline); 1022 hour duration tests under humidified, elevated temperature (750 °C rather than 650 °C) compared a base case against different coating thicknesses. Demonstrated capability to identify initial key defects of interest with in-line metrology techniques using up to 8 cm by 10 cm having coatings with and without intentional defects of interest using thermal imaging and optical profilometry. Correlated key defects identified using metrology techniques with observed coating performance (e.g., ASR and Cr volatility). Conducted several 4 cm by 4 cm cell tests using MCO-interconnects that were pre-screened using some of the metrology techniques developed in the project (e.g., optical profilometry). An analysis of ASR measurements were able to show that defect-free coatings resulted in the anticipated performance in the cell tests.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Source Term Analysis of Xenon (STAX): An effort focused on differentiating man-made isotope production from nuclear explosions via stack monitoring

An overview of the hardware and software developed for the Source Term Analysis of Xenon (STAX) project is presented which includes the data collection from two stack monitoring systems installed at medical isotope production facilities, infrastructure to transfer data to a central repository, and methods for sharing data from the repository with users. STAX is an experiment to collect radioxenon emission data from industrial nuclear facilities with the goal of developing a better understanding of the global radioxenon background and the effect industrial radioxenon releases have on nuclear explosion monitoring. The final goal of this work is to utilize collected data along with atmospheric transport modeling to calculate the contribution of a peak or set of peaks detected by the International Monitoring System (IMS) to provide desired discriminating information to the International Data Centre (IDC) and National Data Centers (NDCs). Types of data received from the STAX equipment are shown and collected data was used for a case study to predict radioxenon concentrations at two IMS stations closest to the Institute for RadioElements (IRE) in Belgium. The initial evaluation of results indicate that the data is very valuable to the nuclear explosion monitoring community.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

Optimization-based approaches to control of connected and automated vehicles: Principles, complexities, applications, challenges, and outlook

Safe and optimal motion control for connected and automated vehicles (CAVs) poses a fundamental optimization challenge at the intersection of system complexity, environmental uncertainty, and stringent real-time constraints. Existing surveys address this challenge in isolation – focusing either on specific control techniques or individual uncertainty sources – without providing a unified framework that characterizes the trade-offs among computational tractability, performance verifiability, and adaptive generalization across paradigms. This review addresses that gap by presenting a cohesive analytical framework concentrated on the decision-making and trajectory optimization layers of the CAV autonomy stack. We systematically analyze three major optimization paradigms – first-principles model-based optimization, data-driven methods, and hybrid synergistic architectures – evaluating each against four core complexity axes: problem formulation, constraint handling, optimality guarantees, and robustness. Key applications including platooning, trajectory planning, collision avoidance, and cooperative control are examined to reveal recurring methodological patterns and critical operational constraints that limit real-world performance. Our synthesis identifies verifiable hybrid architectures, incentive-aligned multi-agent cooperation, and hardware-algorithm co-design as the defining research frontiers, and distills a targeted agenda for developing CAV control systems that are simultaneously safe, computationally efficient, and deployable in the full complexity of real-world traffic environments.

Muzahid, Abu Jafar Md [University of Tennessee, Kn↗
DOE OSTI2021

Identification and correction of temporal and spatial distortions in scanning transmission electron microscopy

Scanning transmission electron microscopy (STEM) has become the technique of choice for quantitative characterization of atomic structure of materials, where the minute displacements of atomic columns from high-symmetry positions can be used to map strain, polarization, octahedra tilts, and other physical and chemical order parameter fields. The latter can be used as inputs into mesoscopic and atomistic models, providing insight into the correlative relationships and generative physics of materials on the atomic level. However, these quantitative applications of STEM necessitate understanding the microscope induced image distortions and developing the pathways to compensate them both as part of a rapid calibration procedure for in situ imaging, and the post-experimental data analysis stage. Here, we explore the spatiotemporal structure of the microscopic distortions in STEM using multivariate analysis of the atomic trajectories in the image stacks. Based on the behavior of principal component analysis (PCA), we develop the Gaussian process (GP)-based regression method for quantification of the distortion function. The limitations of such an approach and possible strategies for implementation as a part of in-line data acquisition in STEM are discussed. Here, the analysis workflow is summarized in a Jupyter notebook that can be used to retrace the analysis and analyze the reader's data.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nanoscale Ferroelectric Programming of van der Waals Heterostructures

We demonstrate an approach to creating nanoscale potentials in van der Waals layers integrated with a buried programmable ferroelectric layer. Using ultra-low-voltage electron beam lithography (ULV-EBL), we can program the ferroelectric polarization in Al 1–x B x N (AlBN) thin films, generating structures with sizes as small as 35 nm. We demonstrate the ferroelectric field effect with a graphene/vdW stack on AlBN by creating a p–n junction. This resist-free, high-resolution, contactless patterning method offers a new pathway to integrate ferroelectric films with a wide range of two-dimensional layers including transition-metal dichalcogenides (TMD), enabling arbitrary programming and top-down creation of multifunctional devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantitative Performance Assessment of Proxy Apps and Parents (ECP Proxy App Project Milestone ADCD-504-9)

This report presents highlights of these efforts. Section 2 describes work that has been done to compare the performance of proxy applications on AMD MI60 vs. Nvidia V100 GPUs. So far only a small set of ECP proxies are running on AMD GPUs, but we will continue to expand this analysis as additional proxies become available. We find that although the MI60 and V100 have nearly the same measured memory bandwidth, memory bound proxy app kernels perform 20-30% worse on the MI60. Further work is needed to refine these comparisons to determine whether the root cause is due to differences in the hardware, software stack, platform specific optimization, or some combination of the three. Section 3 describes our continuing effort to find methods to accurately assess the similarity of proxies and parents. We have recently seen very encouraging results using a cosine similarity metric. This technique uses the angle between two vectors of hardware performance counters to characterize the similarity (or difference) between two applications or proxies. We show not only that several widely used proxies are highly similar to their parents, but also that they differ from non-related codes. We also show that cosine similarity can be used to identify gaps and redundancies in suites and even to gain insight into the effects of architectural differences between platforms. Our work on assessing the Exascale toolchain is ongoing. Our successes with performance measurement tools are evident from the data provided in this report. However, our assessments across the broader tool chain are still too incomplete to provide a meaningful report at this time. We will continue to assess tools and work with vendors and third party developers as issues are identified.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Hydrogen Production Cost with Alkaline Electrolysis

Rigorous stakeholder-vetted techno-economic analysis was performed to assess the cost of hydrogen (H 2 ) produced using state-of-the-art Liquid Alkaline (LA) electrolysis. Projected high-volume, untaxed levelized cost of hydrogen (LCOH) range from 2020US $\$ 1.84$ to $\$ 2.88$/kg-H 2 depending on technology year, process design, and electrolyzer project scale, assuming an electricity price of $\$ 0.03$/kWh. The total installed capital cost for a LA electrolysis plant was estimated from bottom-up stack and installed cost models that account for purchased equipment, installation costs, site preparation, and general overhead costs. For this study, the LA electrolysis plant is assumed to be a stick-built, greenfield project developed by an EPC firm with electrolysis stacks purchased directly from an electrolysis stack manufacturer. The price of the electrolysis stacks is based on a bottom-up cost assessment with business markup for the electrolysis company fabricator. Methods from the Hydrogen Analysis (H 2 A) production model, a peer-reviewed national laboratory-developed discounted cash flow model, were used to calculate the LCOH production in 2020$/kg-H 2 . The baseline electricity price case ($\$ 0.03$/kWh) corresponds to average wholesale electricity prices currently possible in U.S. markets with plentiful wind. Similar low-cost electricity pricing is possible from solar Power Purchase Agreements (PPA) although these prices are typically limited by renewable energy capacity factors.

08 HYDROGEN↗
DOE OSTI2024

Hydrogen Production Cost with Anion Exchange Membrane Electrolysis

Rigorous stakeholder-vetted techno-economic analysis was performed to assess the cost of hydrogen (H 2 ) produced using state-of-the-art Anion Exchange Membrane (AEM) electrolysis. Projected high-volume, untaxed and unsubsidized levelized cost of hydrogen (LCOH)1 range from 2020 $\$$1.78 to $\$$3.68/kg H 2 depending on technology year, process design, and electrolyzer project scale, assuming an electricity price of $\$$0.03/kWh and a capacity factor of 97%. The total installed capital cost for an AEM electrolysis plant was estimated from bottom-up stack and process plant cost models. The stack cost model accounts for manufacturing equipment, equipment maintenance, material, tooling, cycle time, yield, labor, utilities and general overhead. The process plant cost model accounts for purchased equipment, installation costs, site preparation, and general overhead costs. For this study, the AEM electrolysis plant is assumed to be a stick-built, greenfield project developed by an engineering, procurement, and construction (EPC) firm with electrolysis stacks purchased directly from an electrolysis stack manufacturer. The price of the electrolysis stacks is based on a bottom-up cost assessment with business markup for the electrolysis company fabricator. Methods from the Hydrogen Analysis (H2A) production model, a peer-reviewed national laboratory-developed discounted cash flow (DCF) model, were used to calculate the production LCOH in 2020 $\$$/kg H 2 . The baseline electricity price case ($\$$0.03/kWh) corresponds to average wholesale electricity prices currently possible in U.S. markets with plentiful wind. Similar low-cost electricity pricing is possible from solar Power Purchase Agreements (PPA) although these prices are typically limited by renewable energy capacity factors.

08 HYDROGEN↗
DOE OSTI2021

Method of fabricating a three-dimensionally patterned mechanical energy absorptive material

A three-dimensionally patterned energy absorptive material and fabrication method having multiple layers of patterned filaments extrusion-formed from a curable pre-cursor material and stacked and cured in a three-dimensionally patterned architecture so that the energy absorptive material produced thereby has an engineered bulk property associated with the three-dimensionally patterned architecture.

Duoss, Eric B.↗
DOE OSTI2022

Temperature Mapping of Stacked Silicon Dies from X-Ray-Diffraction Intensities

Increasing power densities in integrated circuits have led to an increased prevalence of thermal hotspots in integrated circuits. Tracking these thermal hotspots is imperative to prevent circuit failures. In three- dimensional (3D) integrated circuits, conventional surface techniques like infrared thermometry are unable to measure the 3D temperature distribution, and optical and magnetic resonance techniques are difficult to apply due to the presence of metals and large current densities. X-rays offer a high penetration depth and can be used to probe 3D structures. We report a method utilizing the temperature dependence of x-ray-diffraction intensity via the Debye-Waller factor to simultaneously map the temperature of individual silicon dies in a stack. Here, utilizing beamline 1-ID-E at the Advanced Photon Source (Argonne), we demonstrate, for each individual silicon die, a temperature resolution of 3 K, a spatial resolution of 100 × 400 μm 2 , and a temporal resolution of 20 s. Utilizing a sufficiently high-intensity laboratory source, e.g., from a liquid-anode source, this method can be scaled down to laboratories for noninvasive temperature mapping of 3D integrated circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Evaluation of a 5kW Solid Oxide Electrolysis Cell Stack

Solid oxide electrolysis cells (SOECs) are a developing technology for hydrogen production. They are promising due to their utilization of thermal energy to reduce their electricity consumption. The Department of Energy (DOE) has set goals to reduce the price per kilogram of hydrogen, and Idaho National Laboratory (INL) is conducting research to develop and demonstrate advanced methods and technologies to achieve making hydrogen a more affordable, efficient, and sustainable energy source. In this project, INL is collaborating with a vendor to evaluate and validate the design of a 5kW SOEC stack. The test aims to demonstrate a safe startup, operation, and shutdown on INL’s 5kW test stand, providing third-party validation in a different environment. A successful 50-hour test with stable hydrogen production will pave the way for a subsequent 1000-hour test. This project emphasized learning about electrolysis and the various support systems, referred to as balance of plant (BOP) equipment. These systems required modification while swapping to the vendor 5kW SOEC stack, most prominently the furnace door design and the controls system. It also included gaining skills in creating computer-aided design (CAD) drawings for the new door while using available materials and ensuring it met high-temperature requirements. Upon completion of modifications to the test stand, the SOEC will be test-fitted with respective wiring and piping. Instrumentation and piping will be checked for leaks and quality. This must be completed before the vendor’s engineers arrive to observe the test plan, startup, and a collection of 50 hours of data. The vendor’s engineers will ensure their stack performed sufficiently in the 50-hour test to enable the progression to a 1000-hour test.

08 - HYDROGEN↗
DOE OSTI2024

Electrochemical Control of the Ultrafast Lattice Response of a Layered Semimetal

The unique layer-stacking in two-dimensional (2D) van der Waals materials facilitates the formation of nearly degenerate phases of matter and opens novel routes for the design of low-power, reconfigurable functional materials. Electrochemical ion intercalation between stacked layers offers a promising approach to stabilize bulk metastable phases and to explore the effects of extreme carrier doping and strain. However, in situ characterization methods to study the structural evolution and dynamical functional properties of these intercalated materials remains limited. Here a novel experimental platform is presented capable of simultaneously performing electrochemical lithium-ion intercalation and multimodal ultrafast characterization of the lattice using both electron diffraction and nonlinear optical techniques. Using the layered semimetal WTe 2 as a model system, the interlayer shear phonon mode that modulates stacking between 2Dlayers is probed, showing that small amounts of lithiation enhance the amplitude and lifetime of the phonon, contrary to expectations. This results from the dynamically fluctuating and anharmonic structure between nearly degenerate phases at room temperature, which can be stabilized by electronic carriers accompanying the inserted lithium ions. At high lithiation, the T d ’ structure emerges and quenches the phonon response. This work defines new approaches for using electrochemistry to engineer the dynamic structure of 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High temperature superconducting magnet

Systems and methods for superconducting magnets are disclosed, such systems and methods comprising a primary coil and short-circuited secondary coil. The secondary coil can be made from a stack of superconducting tapes having longitudinal cuts forming closed superconductor loops without splices. The primary coil is used to pump the current into the secondary coil where it circulates continuously generating a permanent magnetic field.

Kashikhin, Vladimir↗