Search NASA⌕ Search

SEARCH · Search NASA

Results for “stream processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

On the interpretation of measured ion streams in the wake of the Shuttle Orbiter in terms of plasma expansion processes

Measurements of the flow vector and current density of ion streams between 11 and 18 m downstream in the near wake of the Shuttle Orbiter during the Spacelab 2 mission are compared with a one-dimensional, time-dependent plasma expansion model for wake filling. The model is based on the self-consistent plasma model of Singh et al. (1987) modified to simulate the one-dimensional expansion of counter-streaming plasmas. The results show good agreement between the model and the experimental results, suggesting that the measured streams can be interpreted in terms of collisionless plasma expansion.

Singh, N.↗
DOE OSTI2024

On learning what to learn: Heterogeneous observations of dynamics and establishing possibly causal relations among them

Abstract Before we attempt to (approximately) learn a function between two sets of observables of a physical process, we must first decide what the inputs and outputs of the desired function are going to be. Here we demonstrate two distinct, data-driven ways of first deciding “the right quantities” to relate through such a function, and then proceeding to learn it. This is accomplished by first processing simultaneous heterogeneous data streams (ensembles of time series) from observations of a physical system: records of multiple observation processes of the system. We determine (i) what subsets of observables are common between the observation processes (and therefore observable from each other, relatable through a function); and (ii) what information is unrelated to these common observables, therefore particular to each observation process, and not contributing to the desired function. Any data-driven technique can subsequently be used to learn the input–output relation—from k-nearest neighbors and Geometric Harmonics to Gaussian Processes and Neural Networks. Two particular “twists” of the approach are discussed. The first has to do with the identifiability of particular quantities of interest from the measurements. We now construct mappings from a single set of observations from one process to entire level sets of measurements of the second process, consistent with this single set. The second attempts to relate our framework to a form of causality: if one of the observation processes measures “now,” while the second observation process measures “in the future,” the function to be learned among what is common across observation processes constitutes a dynamical model for the system evolution.

Sroczynski, David W.↗
DOE OSTI2024

Materials Characterization, Prediction and Control Project: Summary Report on Data Analytics Framework

This report summarizes the activities performed under the data analytics Vertex in the Materials Characterization, Prediction and Control Project funded under laboratory directed research and development at Pacific Northwest National Laboratory. The data analytics Vertex developed models for associating global or local process parameters, microstructural features, and performance properties of friction-stir-processed 316L stainless steel plates. Statistical, machine learning, and deep learning models, as well as generative artificial intelligence approaches, were used to develop the associations between the process-structure-property data streams. These associations formed the basis for predicting global properties of parts manufactured under different process envelopes, providing a basis for predicting performance using data driven as well as physics-informed and physics-constrained approaches. Additionally, the associations were used to predict local process parameters and microstructural features of the product, predictive relationships that have the potential to form the basis of a control framework that could eventually modulate a friction-stir process to maintain product quality.

316L stainless steel↗
NASA NTRS2024

Input Waste Stream Modeling for Trash Management, Recycling, and Manufacturing Processes

Astronaut waste is an important aspect of the planning and execution of long-term crewed missions, especially to the Moon and Mars. However, as new technologies arise and mission planning evolves, the projected composition of the waste similarly evolves. This poses a problem for researchers who are investigating various approaches to mitigating crew waste, since the investigation of each new waste-mitigation technology typically uses a static waste composition that is based on a simulant developed at the time of the research; several such waste simulants have been developed over recent years. To mitigate the ‘moving target’ aspect of crew waste composition and use, researchers at NASA KSC have developed a computational tool wherein researchers can adjust the composition of the crew waste, as well as other important parameters such as crew size, mission duration, and waste mitigation method (e.g., incineration, compaction, jettison, etc.). The computational tool then returns important mission metrics such as waste-related mass reduction, power consumed, water produced or consumed, elemental mass balance, and available feedstock for in-space manufacturing (ISM) applications. This tool can then be used to adjust aspects of a waste model (e.g., removal of metal aluminum (Al) for ISM applications) and determine an associated set of metrics in order to inform mission planning.

Ray Pitts↗
DOE OSTI2025

Contaminant Investigation and Pre‐Processing Opportunities for Textile‐To‐Textile Recycling

Millions of metric tons of textiles are landfilled or incinerated each year in the United States, with less than 1% of textiles recycled into new clothing or fabrics. To counter this trend, a growing number of companies and researchers are exploring how a circular economy can be applied to support textile‐to‐textile recycling. A significant barrier they face comes down to quickly and efficiently extracting pure feedstock material from post‐consumer garments that feature a mix of natural and synthetic fibers. Textile recyclers prefer pure feedstocks, as working with mixed sources typically means lower throughput, higher risk of equipment failure, and diminished business margins. To facilitate a circular economy for textiles, methods, and technologies are needed that can efficiently separate out materials and contaminants from end‐of‐life textiles to increase the flow of pure feedstocks to recyclers. This paper summarizes findings from interviews with a cross section of textile recyclers and from a review of literature to define basic feedstock requirements. In addition to our qualitative research, we deconstruct a bale of post‐consumer textiles and analyze them using computer‐vision imaging, Fourier transform infrared spectroscopy (FTIR), and machine learning. The resulting data are used to set system‐level design inputs for an automated contaminant removal system to process post‐consumer clothing into appropriate feedstocks for recycling. To set the system's levels for automated real‐time near‐infrared analysis, we identify the minimum percentage of primary material that any single garment in a load of used clothing must contain for the average of the full output stream to meet the target purity levels of recyclers. Here, the envisioned automated system can also address undesirable trace materials that might contaminate the processed stream by using imaging cameras coupled with artificial intelligence to identify sections of clothing for de‐trimming. Proof‐of‐concept machine learning algorithms are evaluated to locate and identify trims or garment areas with hidden contaminant materials. Integrating these methods into automated textile cutting systems can provide a cost‐effective means for increasing feedstock purity from used clothing, which can advance circularity for textiles by helping recyclers to reach production volumes and quality targets that were not possible solely with manual dismantling operations.

Parsons, Ryan [Rochester Institute of Technology, ↗
NASA NTRS1994

Approaches to resource recovery in controlled ecological life support systems

Recovery of resources from waste streams in a space habitat is essential to minimize the resupply burden and achieve self sufficiency. The ultimate goal of a Controlled Ecological Life Support System (CELSS) is to achieve the greatest practical level of mass recycle and provide self sufficiency and safety for humans. Several mission scenarios leading to the ultimate application could employ CELSS component technologies or subsystems with initial emphasis on recycle of the largest mass components of the waste stream. Candidate physical/chemical and biological processes for resource recovery from liquid and solid waste streams are discussed and the current fundamental recovery potentials are estimated.

Bubenheim, D. L.↗
DOE OSTI2024

Characterization of Precipitate Reactor Feed Tank (PRFT) Batches 15, 22, and 26 from the Defense Waste Processing Facility (DWPF)

The Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) processes a Monosodium Titanate/Sludge Solids (MST/SS) waste stream received from the Salt Waste Processing Facility (SWPF) via the Precipitate Reactor Feed Tank (PRFT). During processing, DWPF is required to provide evidence of compliance with the Waste Acceptance Product Specifications (WAPS) to ensure acceptance of their vitrified high-level waste (HLW) into the Civilian Radioactive Waste Management System. Production Records must document the constituents of the MST/SS material in the PRFT from each salt batch (StB) processed at SWPF. Savannah River Mission Completion (SRMC) has requested Savannah River National Laboratory (SRNL) to analyze PRFT samples representing each SWPF salt batch for thirty-two radionuclides. Additionally, elemental analysis of PRFT slurry and MST/SS solids was performed to aid SRMC in further refinement of the inputs and assumptions used in future frit development and Material Tracking Program calculations. The analyses of PRFT Batches 15, 22, and 26, which corresponds to material from the processing of StB4, StB5, and StB7, respectively, are reported herein. The unwashed dried solids of the PRFT batches were found to be 86-87% MST. Additionally, the total sulfur values are well below the assumed 982 mg of sulfate/kg of PRFT slurry used in Material Tracking Program calculations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Characterization of Precipitate Reactor Feed Tank (PRFT) Batches 44 and 49 from the Defense Waste Processing Facility (DWPF)

The Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) processes a Monosodium Titanate/Sludge Solids (MST/SS) waste stream received from the Salt Waste Processing Facility (SWPF) via the Precipitate Reactor Feed Tank (PRFT). During processing, DWPF is required to provide evidence of compliance with the Waste Acceptance Product Specifications (WAPS). Savannah River Mission Completion (SRMC) has requested Savannah River National Laboratory (SRNL) to analyze PRFT samples representing each SWPF salt batch for thirty-two radionuclides. Additionally, elemental analysis of PRFT slurry and MST/SS solids was performed to aid SRMC in further refinement of the inputs and assumptions used in future frit development and Material Tracking Program calculations. The analyses of PRFT Batches 44 and 49, which correspond to material from the processing of Salt Batches (StB) 12 and 11, respectively, are reported herein. The unwashed dried solids of the PRFT Batches 44 and 49 are predominately MST, ~63-59% MST. The two batches have a much higher amount of Fe, Mn, and Ni compared to all previous batches. For Batch 44 this appears to be due to the use of a sludge simulant filter aid during processing of StB 12 and for Batch 49, it is possibly due to the larger amount of insoluble solids for StB 11 in comparison to all previous salt batches. Like previous PRFT batches, a significant amount of the unwashed dried solids are alkaline earth metals. The total sulfate, in mg/kg of slurry, for PRFT Batches 44 and 49 is 119 and 139, respectively, which is well below the current sulfate concentration used in Material Tracking Program calculations and is in agreement with DWPF laboratory sulfate measurements.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1981

Carbon scrubber

Inorganic carbon is removed from samples to be analyzed for "total organic carbon". In automated water analysis systems, semipermeable membrane separates two sample streams, one treated with acid, other with base. Carbonate and bicarbonated ions are converted to dissolved CO2 by acid; reverse process occurs in basic stream. Only CO2 is passed by membrane, from acid treated stream to base treated stream. Acidic stream emerges free of all inorganic carbon.

Frant, M. S.↗
DOE OSTI2024

Streaming Large-Scale Microscopy Data to a Supercomputing Facility

Data management is a critical component of modern experimental workflows. As data generation rates increase, transferring data from acquisition servers to processing servers via conventional file-based methods is becoming increasingly impractical. The 4D Camera at the National Center for Electron Microscopy generates data at a nominal rate of 480 Gbit s -1 (87,000 frames s -1 ⁠), producing a 700 GB dataset in 15 s. To address the challenges associated with storing and processing such quantities of data, we developed a streaming workflow that utilizes a high-speed network to connect the 4D Camera’s data acquisition system to supercomputing nodes at the National Energy Research Scientific Computing Center, bypassing intermediate file storage entirely. In this work, we demonstrate the effectiveness of our streaming pipeline in a production setting through an hour-long experiment that generated over 10 TB of raw data, yielding high-quality datasets suitable for advanced analyses. Additionally, we compare the efficacy of this streaming workflow against the conventional file-transfer workflow by conducting a postmortem analysis on historical data from experiments performed by real users. Our findings show that the streaming workflow significantly improves data turnaround time, enables real-time decision-making, and minimizes the potential for human error by eliminating manual user interactions.

4D-STEM↗
NASA NTRS1993

Membrane Separation Of Nitrogen Tetroxide

Pilot plant reduces N2O4 content to one-hundredth of inlet value. Permeable-membrane process removes nitrogen tetroxide from stream of nitrogen or helium gas. Operates in conjunction with scrubbing process removing N2O4 from He or N2 after He or N2 used as gas blanket in N2O4-storage tank. First stage of separator divided into two steps for efficiency. Permeate from second step of first stage and residue from second stage returned to inlet of first stage. Each module contains spiral-wound interleaved permeable membranes and spacer sheets.

Castro, R. C.↗
DOE OSTI2025

Integrated low-temperature PVC and polyolefin upgrading

Polyolefins and their chlorinated derivatives such as polyvinyl chloride (PVC) are among the most prevalent plastics in global production and waste streams. Traditional waste-to-energy methods such as incineration and pyrolysis, as well as most chemical upcycling methods for PVC utilization, require thorough, high-temperature dechlorination to prevent the release of toxic chlorinated compounds. Here, we present here a strategy for upgrading discarded PVC into chlorine-free fuel range hydrocarbons and hydrogen chloride in a single-stage process catalyzed by chloroaluminate ionic liquids. This approach offsets endothermic dechlorination and carbon-carbon bond cleavage with exothermic alkylation and hydrogen transfer by isobutane or isopentane in a low-temperature tandem process. The light isoalkanes are available from refinery processes and partly from recycling of the product stream. This process is suitable for handling real-world mixed and contaminated PVC and polyolefin waste streams.

Zhang, Wei [East China Normal Univ. (ECNU), Shangh↗
DOE OSTI2026

rustpix

rustpix is a high-performance, open-source Rust library with first-class Python bindings (via PyO3) for processing pixel-detector data in neutron imaging. It targets time-stamping detectors such as Timepix3 (TPX3) at ORNL's Spallation Neutron Source (VENUS beamline), where each detected neutron deposits charge across a cluster of pixels within a very high-rate event stream (96M+ hits/sec). rustpix parses TPX3 event data in parallel using memory-mapped I/O, offers four interchangeable clustering algorithms (ABS adjacency-based search, DBSCAN, graph/union-find connected components, and a parallel grid method), and extracts weighted, super-resolved centroids to produce neutron-event lists. A streaming architecture lets it process files larger than available memory. rustpix is distributed as a pip-installable Python package (with NumPy integration), Rust crates, a command-line tool, and an interactive GUI; it writes HDF5, Apache Arrow, and CSV; and it is designed to extend to TPX4 and other detector types. Released as open-source under the MIT License.

Zhang, Chen [Oak Ridge National Laboratory (ORNL),↗
NASA NTRS1992

Formation of the Leonid meteor stream and storm

It is well known that some meteor showers display a very high level of activity at certain times, the most famous being the Leonid shower with very spectacular displays at roughly 33 year intervals. This period being also the period of the parent comet of the stream, Comet Tempel-Tuttle. An investigation of the geometry of the comet and the Earth at the time of each high activity occurrence by Yeomans suggests that most of the meteoroids are found outside the cometary orbit and lagging the comet. The formation process of such a stream by numerically integrating the orbits of dust particles ejected from the comet and moving under the influence of gravity and radiation pressure are simulated. The intersection of these dust particles with the Earth is also considered and it is concluded that about 12 percent of the ejected particles may be observed and that of those observable, 63 percent will be outside the cometary orbit and behind the comet.

Wu, Zidian↗
DOE OSTI2025

Real-time data processing for serial crystallography experiments

We report the use of streaming data interfaces to perform fully online data processing for serial crystallography experiments, without storing intermediate data on disk. The system produces Bragg reflection intensity measurements suitable for scaling and merging, with a latency of less than 1 s per frame. Our system uses the CrystFEL software in combination with the ASAP::O data framework. In a series of user experiments at PETRA III, frames from a 16 megapixel Dectris EIGER2 X detector were searched for peaks, indexed and integrated at the maximum full-frame readout speed of 133 frames per second. The computational resources required depend on various factors, most significantly the fraction of non-blank frames ('hits'). The average single-thread processing time per frame was 242 ms for blank frames and 455 ms for hits, meaning that a single 96-core computing node was sufficient to keep up with the data, with ample headroom for unexpected throughput reductions. Further significant improvements are expected, for example by binning pixel intensities together to reduce the pixel count. We discuss the implications of real-time data processing on the `data deluge' problem from recent and future photon-science experiments, in particular on calibration requirements, computing access patterns and the need for the preservation of raw data.

47 OTHER INSTRUMENTATION↗
NASA NTRS1978

A three-dimensional model of corotating streams in the solar wind. 1: Theoretical foundations

The theoretical and mathematical background pertinent to the study of steady, corotating solar wind structure in all three spatial dimensions (3-D) is discussed. The dynamical evolution of the plasma in interplanetary space (defined as the region beyond roughly 35 solar radii where the flow is supersonic) is approximately described by the nonlinear, single fluid, polytropic (magneto-) hydrodynamic equations. Efficient numerical techniques for solving this complex system of coupled, hyperbolic partial differential equations are outlined. The formulation is inviscid and nonmagnetic, but methods allow for the potential inclusion of both features with only modest modifications. One simple, highly idealized, hydrodynamic model stream is examined to illustrate the fundamental processes involved in the 3-D dynamics of stream evolution. Spatial variations in the rotational stream interaction mechanism were found to produce small nonradial flows on a global scale that lead to the transport of mass, energy, and momentum away from regions of relative compression and into regions of relative rarefaction.

Pizzo, V. J.↗
NASA NTRS2010

The Reduction of Lunar Regolith by Carbothermal Processing Using Methane

The processing of lunar regolith for the production of oxygen is a key component of the In-Situ Resource Utilization plans currently being developed by NASA. In the carbothermal process, a portion of the surface of the regolith in a container is heated by exposure to a heat source so that a small zone of molten regolith is established. A continuous flow of methane is maintained over the molten regolith zone. In this paper, we discuss the development of a chemical conversion model of the carbothermal process to predict the rate of production of carbon monoxide. Our model is based on a mechanism where methane pyrolyzes when it comes in contact with the surface of the hot molten regolith to form solid carbon and hydrogen gas. Carbon is deposited on the surface of the melt, and hydrogen is released into the gas stream above the melt surface. We assume that the deposited carbon mixes in the molten regolith and reacts with metal oxides in a reduction reaction by which gaseous carbon monoxide is liberated. Carbon monoxide bubbles through the melt and is released into the gas stream. It is further processed downstream to ultimately produce oxygen.

Balasubramaniam, R.↗