Search NASA⌕ Search

SEARCH · Search NASA

Results for “strong field processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Experimental Study of Nonane and Nonane/Hexanol Fuel Droplet Combustion in Microgravity

In this presentation we review experiments carried out on nonane droplets, and a nonane/hexanol droplet, burning in microgravity to promote spherical symmetry. The nonane/hexanol combination was selected for the following reasons: 1) the spherically symmetric burning history of nonane and nonane/hexanol mixtures has not been previously studied; 2) measurements of the burning history of pure nonane droplets in air extend the existing data base of spherical droplet flames of soot-producing fuels which are useful for testing detailed chemical kinetic models of the spherically symmetric droplet burning process; 3) nonane and hexanol have almost identical boiling points so heterogeneous nucleation on a support fiber is unlikely; 4) hexanol does not have a strong propensity for water vapor absorption; 5) hexanol produces less soot than nonane so that mixtures of nonane and hexanol should show an effect of composition on soot formation. The far-field gas was atmospheric pressure air at room temperature. The evolution of droplet diameter was measured using high speed cine photography of spark-ignited droplets within a confined volume in a drop tower. The importance of soot formation during droplet combustion is derived from the fact that soot is the basic component of the particulate emission process that occurs in spray combustion. The complexity of soot formation motivates a one-dimensional transport condition which is advantageous for modeling. Recent numerical studies of droplet combustion have assumed spherical symmetry when incorporating such aspects as detailed chemistry and radiation, though soot formation itself has not yet been included in any droplet combustion modeling effort. If radiation is not important as would be the case for'small' droplets (i.e., droplets with initial diameters less than about ]mm), soot formation can lead to a nonlinear burning process and a time-varying burning rate, (non-linear burning of a non-sooting fuel like methanol is due to water vapor absorption on the droplet. The classical quasi-steady droplet burning theory predicts a linear evolution of droplet diameter in scaled coordinates for any fuel type.

Avedisian, C. T.↗
NASA NTRS1982

Turbofan forced mixer-nozzle internal flowfield. Volume 1: A benchmark experimental study

An experimental investigation of the flow field within a model turbofan forced mixer nozzle is described. Velocity and thermodynamic state variable data for use in assessing the accuracy and assisting the further development of computational procedures for predicting the flow field within mixer nozzles are provided. Velocity and temperature data suggested that the nozzle mixing process was dominated by circulations (secondary flows) of a length scale on the order the lobe dimensions which were associated with strong radial velocities observed near the lobe exit plane. The 'benchmark' model mixer experiment conducted for code assessment purposes is discussed.

Paterson, R. W.↗
NASA NTRS1982

Finite element analysis of nonisothermal polymer processing operations

A finite element formulation for the analysis of polymer processing is presented and its use in some typical situation including entry flow, transient Couette flow, and the Graetz (forced convection) problem is illustrated. The element formulations are constructed on the premise that momentum convection can be neglected (polymer melt flows typically have very low Reynolds' numbers), but that convective heat transfer may be significant (high Peclet numbers). Nonisothermal effects are considered important in polymer processing, due in part to the significant heating which may occur due to viscous dissipation, and also to the very strong influence of temperature on fluid viscosity. The flow is treated as Newtonian with the flow field being coupled to the heat transfer equation only through the viscous heat generation.

Douglas, C.↗
NASA NTRS1991

Solar EUV/FUV line polarimetry. I - Observational parameters and theoretical considerations. II - Instruments and methods

The paper discusses theoretical considerations and presents the observational parameters for the development of reflective FUV coronagraph/polarimeter and EUV imaging polarimeter instruments. New EUV/FUV polarimeter instrument concepts for solar research are described. One of these is a new coronagraph/polarimeter operating at 1215.6 A, which could observe the neutral hydrogen Ly-alpha line in the near solar corona and lead to the first direct measurements of both the strength and the direction of coronal magnetic fields. The other is a new multilayer EUV imaging polarimeter, operating at the wavelengths of strong He emission lines, which could observe impact polarization phenomena and provide information concerning the relative importance of thermal and nonthermal processes in solar flares.

Fineschi, Silvano↗
NASA NTRS1994

Plasma effects on the interaction of a comet with Jupiter

I consider some plasma effects to be expected when the fragments of Comet Shoemaker-Levy 9 crash into Jupiter. Emphasis is put on pre-impact effects, and on the possibility of significant radio emission. It is shown than an ionizing shock will develop at altitudes below about 600 km, and that significant ionization will exist above that altitude. The incoming comet and its surroundings will then represent a rapidly moving conductor in a strong magnetic field and will induce large currents in Jupiter's magnetosphere, similar both qualitatively and quantitatively to a way in which Io interacts with Jupiter's magnetic field and with the plasma of the torus. This process is thought to be involved in the generation of decametric radiation, so that the impact of the comet may also produce such radiation. The power involved in this interaction is estimated to be at least 1/15th of the power due to Io, and its duration to be for 10-20 s before the comet's impact with the surface of Jupiter.

Kellogg, Paul J.↗
NASA NTRS2004

Measurements of HNO3, SO2 High Resolution Aerosol SO4 (sup 2-), and Selected Aerosol Species Aboard the NASA DC-8 Aircraft: During the Transport and Chemical Evolution Over the Pacific Airborne Mission (TRACE-P)

The UNH investigation during TRACE-P provided measurements of selected acidic gases and aerosol species aboard the NASA DC-8 research aircraft. Our investigation focused on measuring HNO3, SO2, and fine (less than 2 microns) aerosol SO4(sup 2-) with two minute time resolution in near-real-time. We also quantified mixing ratios of aerosol ionic species, and aerosol (210)Pb and (7)Be collected onto bulk filters at better than 10 minute resolution. This suite of measurements contributed extensively to achieving the principal objectives of TRACE-P. In the context of the full data set collected by experimental teams on the DC-8, our observations provide a solid basis for assessing decadal changes in the chemical composition and source strength of Asian continental outflow. This region of the Pacific should be impacted profoundly by Asian emissions at this time with significant degradation of air quality over the next few decades. Atmospheric measurements in the western Pacific region will provide a valuable time series to help quantify the impact of Asian anthropogenic activities. Our data also provide important insight into the chemical and physical processes transforming Asian outflow during transport over the Pacific, particularly uptake and reactions of soluble gases on aerosol particles. In addition, the TRACE-P data set provide strong constraints for assessing and improving the chemical fields simulated by chemical transport models.

Talbot, Robert W.↗
NASA NTRS1998

Numerical Simulations of a Lobed Fuel Injector

Numerical modeling of the nonreactive mixing processes associated with a lobed fuel injector in a coflowing air stream is presented. The lobed fuel injector is a device which generates strong streamwise vorticity, producing locally high strain rates which can enhance the molecular mixing of reactants while delaying ignition in a controlled manner. Vortex element modeling is used to simulate flow field evolution and fuel element mixing characteristics for this lobed fuel injector. Quantitative predictions for vorticity generation and qualitative results for streamwise rollup compare well qualitatively with recent experimental investigations of this flow field [Smith et al, Phys. Fluids 9, 667 (1997)]. Parametric studies of the effects of lobe amplitude-to-wavelength ratio, lobe angle, and lobe shape for given flow conditions suggest that geometrical features may be optimized to enhance mixing and control reaction processes.

Strickland, J. H.↗
NASA NTRS1977

A model for particle confinement in a toroidal plasma subject to strong radial electric fields

A toroidal plasma is confined and heated by the simultaneous application of strong d.c. magnetic fields and electric fields. Strong radial electric fields (about 1 kilovolt per centimeter) are imposed by biasing the plasma with up to 12 negative electrode rings which surround its minor circumference. The plasma containment is consistent with a balance of two processes: a radial infusion of ions in those sectors not containing electrode rings, resulting from the radially inward electric fields; and ion losses to the electrode rings, each of which acts as a sink and draws ions out the plasma in the manner of a Langmuir probe in the ion saturation regime. The highest density on axis which has been observed so far in this steady-state plasma is 6.2 x 10 to the 12th power particles per cubic centimeter, for which the particle containment time is 2.5 milliseconds. The deuterium ion kinetic temperature for these conditions was in the range of 360 to 520 eV.

Roth, J. R.↗
NASA NTRS1979

Implications of cyclotron features in the X-ray spectrum of Her X-1

The X-ray spectra from binary pulsars is investigated through the modification of physical processes due to an intense magnetic field. An effective scattering cross section for line photons and the Coulomb cross section for electron-ion collisions, treating the electrons relativistically, are calculated. The quantization of electron orbits in strong fields are discussed. The absorption cross sections and emission rates for cyclotron photons are calculated. An application of the results to the data from Hercules X-1 is examined.

Bussard, R.↗
NASA NTRS1979

Acoustic fluidization - A new geologic process

A number of geologic processes, particularly seismic faulting, impact crater slumping, and long runout landslides, require the failure of geologic materials under differential stresses much smaller than expected on the basis of conventional rock mechanics. This paper proposes that the low strengths apparent in these phenomena are due to a state of 'acoustic fluidization' induced by a transient strong acoustic wave field. The strain rates possible in such a field are evaluated, and it is shown that acoustically fluidized debris behaves as a newtonian fluid with a viscosity in the range 100,000 to 10,000,000 P for plausible conditions. Energy gains and losses in the acoustic field are discussed, and the mechanism is shown to be effective if internal dissipation in the field gives a Q approximately greater than 100. Whether such values for Q are realized is not known at present. However, acoustic fluidization provides a qualitatively correct description of the failure of rock debris under low differential stresses in the processes of faulting, crater slumping, and long runout landslides. Acoustic fluidization thus deserves serious consideration as a possible explanation of these phenomena.

Melosh, H. J.↗
NASA NTRS1972

Strongly magnetized classical plasma models

The class of plasma processes for which the so-called Vlasov approximation is inadequate is investigated. Results from the equilibrium statistical mechanics of two-dimensional plasmas are derived. These results are independent of the presence of an external dc magnetic field. The nonequilibrium statistical mechanics of the electrostatic guiding-center plasma, a two-dimensional plasma model, is discussed. This model is then generalized to three dimensions. The guiding-center model is relaxed to include finite Larmor radius effects for a two-dimensional plasma.

Montgomery, D. C.↗
NASA NTRS1980

Aerodynamic aspects of shock containing jet plumes

Aerodynamic and acoustic measurements of shock-free and shock-containing plumes were acquired for several supersonic free-jet model nozzles. The purpose was to investigate important features of the broadband shock noise generation process. The aerodynamic measurements include the variation of shock cell spacing and strength as a function of nozzle pressure ratio, and longitudinal turbulent-mass-flux axial development as determined by a hot-film probe. In addition, correlations of the hot-film probe with a near-field microphone were obtained. These measurements provide useful information concerning the relation of peak shock noise frequency and level with variations in shock cell spacing and strength. In general, it is shown that a distinction must be made between plumes containing weak and strong imbedded shocks. Strong shocks diminish the level of emitted shock noise and influence the behavior of the jet mixing noise process. The probable location and spectral content for the shock-shear layer interaction mechanism is indicated by the correlations. Numerical inviscid plume comparisons with experimental data are also included.

Seiner, J. M.↗
NASA NTRS1989

Processing of strong flux trapping high T(subc) oxide superconductors: Center director's discretionary fund

Magnetic suspension effect was first observed in samples of YBa2Cu3O7/AgO(Y-123/AgO) composites. Magnetization measurements of these samples show a much larger hysteresis which corresponds to a large critical current density. In addition to the Y-123AgO composites, recently similar suspension effects in other RE-123/AgO, where RE stands for rare-Earth elements, were also observed. Some samples exhibit even stronger flux pinning than that of the Y-123/AgO sample. An interesting observation was that in order to form the composite which exhibits strong flux trapping effect the sintering temperature depends on the particular RE-123 compound used. The paper presents the detailed processing conditions for the formation of these RE-123/AgO composites, as well as the magnetization and critical field data.

Wu, M. K.↗
NASA NTRS2004

Cusp and LLBL as Sources of the Isolated Dayside Auroral Feature During Northward IMF

An intense dayside proton aurora was observed by IMAGE FUV for an extensive period of northward interplanetary magnetic field (IMF) on 17 and 18 September, 2000. This aurora partially coincided with the auroral oval and intruded farther poleward into the polar cap, and it showed longitudinal motions in response to IMF $B-y$ variation. Intense magnetosheath-like electron and ion precipitations have been simultaneously detected by DMSP above the poleward portion of the high-latitude dayside aurora. They resemble the typical plasmas observed in the low-altitude cusp. However, less intense electrons and more intense energetic ions were detected over the equatorward part of the aurora. These plasmas are closer to the low-latitude boundary layer (LLBL) plasmas. Under strongly northward IMF, global ionospheric convection derived from SuperDARN radar measurements showed a 4-cell pattern with sunward convection in the middle of the dayside polar cap and the dayside aurora corresponded to two different convection cells. This result further supports two source regions for the aurora. The cusp proton aurora is on open magnetic field lines convecting sunward whereas the LLBL proton aurora is on closed field lines convecting antisunward. These IMAGE, DMSP and SuperDARN observations reveal the structure and dynamics of the aurora and provide strong evidence for magnetic merging occurring at the high-latitude magnetopause poleward from the cusp. This merging process was very likely quasi-stationary.

Chang, S.↗
NASA NTRS2004

Cusp and LLBL as Sources of the Isolated Dayside Auroral Feature During Northward IMF

An intense dayside proton aurora was observed by Imager for Magnetopause-to- Aurora Global Exploration Far Ultra-Violet imager (IMAGE FUV) for an extensive period of northward interplanetary magnetic field (IMF) on 17 and 18 September 2000. This aurora partially coincided with the auroral oval and intruded farther poleward into the polar cap, and it showed longitudinal motions in response to IMF By variation. Intense magnetosheath-like electron and ion precipitations have been simultaneously detected by Defense Meteorological Satellite Program (DMSP) above the poleward portion of the high-latitude dayside aurora. They resemble the typical plasmas observed in the low-altitude cusp. However, less intense electrons and more energetic ions were detected over the equatonvard part of the aurora. These plasmas are closer to the low-latitude boundary layer (LLBL) plasmas. Under strongly northward IMF, global ionospheric convection derived from Super Dual Auroral Radar Network (SuperDARN) radar measurements showed a four-cell pattern with sunward convection in the middle of the dayside polar cap and the dayside aurora corresponded to two different convection cells. This result further supports two source regions for the aurora. The cusp proton aurora is on open magnetic field lines convecting sunward whereas the LLBL proton aurora is on closed field lines convecting antisunward. These IMAGE, DMSP, and SuperDARN observations reveal the structure and dynamics of the aurora and provide strong evidence for magnetic merging occurring at the high-latitude magnetopause poleward from the cusp. This merging process was very likely quasi-stationary.

Chang, S.-W.↗
NASA NTRS2023

3D Simulation of Lower-Hybrid Drift Waves in Strong Guide Field Asymmetric Reconnection in Laboratory Experiments

The magnetic reconnection experiment has recently seen short wavelength (kp (e)(1) lower-hybrid waves near the electron diffusion region in strong guide field reconnection. Based on plasma parameters from the experiment, we perform a three-dimensional fully kinetic simulation in order to investigate the generation of the lower-hybrid waves and their effects on the reconnection process. We find that the low-beta regions around the reconnection site are unstable to the lower-hybrid drift instability propagating in the outflow direction, driven by the difference between the electron and ion outflows. The waves modify the electron distributions, leading to periodic opening and closing of gaps in electron velocity space, and provide a small contribution to the anomalous resistivity. Finally, the simulation results are discussed in the context of space observations and laboratory experiments.

J. Ng↗
NASA NTRS1995

Thermally Stable, Piezoelectric and Pyroelectric Polymeric Substrates and Method Relating Thereto

Production of an electric voltage in response to mechanical excitation (piezoelectricity) or thermal excitation (pyroelectricity) requires a material to have a preferred dipole orientation in its structure. This preferred orientation or polarization occurs naturally in some crystals such as quartz and can be induced into some ceramic and polymeric materials by application of strong electric or mechanical fields. For some materials, a combination of mechanical and electrical orientation is necessary to completely polarize the material. The only commercially available piezoelectric polymer is poly(vinylidene fluoride) (PVF2). However, this polymer has material and process limitations which prohibit its use in numerous device applications where thermal stability is a requirement. By the present invention, thermally stable, piezoelectric and pyroelectric polymeric substrates were prepared from polymers having a softening temperature greater than 1000C. A metal electrode material is deposited onto the polymer substrate and several electrical leads are attached to it. The polymer substrate is heated in a low dielectric medium to enhance molecular mobility of the polymer chains. A voltage is then applied to the polymer substrate inducing polarization. The voltage is then maintained while the polymer substrate is cooled 'freezing in' the molecular orientation. The novelty of the invention resides in the process of preparing the piezoelectric and pyroelectric polymeric substrate. The nonobviousness of the invention is found in heating the polymeric substrate in a low dielectric medium while applying a voltage.

Simpson, Joycelyn O.↗
NASA NTRS2009

An Overview of the State of the Art in Atomistic and Multiscale Simulation of Fracture

The emerging field of nanomechanics is providing a new focus in the study of the mechanics of materials, particularly in simulating fundamental atomic mechanisms involved in the initiation and evolution of damage. Simulating fundamental material processes using first principles in physics strongly motivates the formulation of computational multiscale methods to link macroscopic failure to the underlying atomic processes from which all material behavior originates. This report gives an overview of the state of the art in applying concurrent and sequential multiscale methods to analyze damage and failure mechanisms across length scales.

Saether, Erik↗