Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Structural stability and compressibility of group IV transition metals-based bulk metallic glasses under high pressure

High-pressure x-ray diffraction studies have been carried out on the two group IV transition metals-based bulk metallic glasses (BMGs) Zr{sub 57}Cu{sub 15.4}Ni{sub 12.6}Al{sub 10}Nb{sub 5} and Ti{sub 42}Zr{sub 24}Cu{sub 15.5}Ni{sub 14.5}Be{sub 4} to a pressure of 30 GPa at ambient temperature in a diamond anvil cell. Image plate x-ray diffraction studies under high pressure were carried out at a synchrotron source and the two BMG diffraction bands can be followed to the highest pressure using an internal copper pressure standard. The amorphous phase is observed to be stable to the highest static pressure of 30 GPa suggesting that the phase change observed in dynamical pressure experiments is related to an increase in temperature. The measured bulk modulus (B{sub 0}) and its pressure derivative (B') are 118 GPa and 3.11 for Zr-based BMG and 116 GPa and 2.84 for Ti-based BMG. The measured bulk modulus for BMG's by x-ray diffraction technique is consistent with the ultrasonic measurements. The decompression data reveal an increase in density by 3%-4% at ambient condition after pressure cycling to 30 GPa indicating reduction in excess free volume.

36 MATERIALS SCIENCE↗

Structural stability of BiFeO{sub 3} by chemical modification in Bi as well as Fe sites

Lanthanum and titanium doped BiFeO{sub 3} ceramics Bi{sub 1-x}La{sub x}Fe{sub 1-x}Ti{sub x}O{sub 3} (x and 0.0, 0.03 and 0.06) were synthesized by using the Sol-gel method. The phase purity has been studied by powder X-ray diffraction technique. No secondary phases were evident after lanthanum and titanium addition in certain proportion. The XRD patterns have been analyzed by employing Rietveld refinement technique with the help of Fullprof program. The XRD pattern could be refined by R3c space group in rhombohedral symmetry. The electrical characteristics for all samples have been studied by ferroelectric hysteresis loop at room temperature in the applied electric field of 60 kV/cm.

36 MATERIALS SCIENCE↗

Tuning the Magnetic Properties and Structural Stabilities of the 2-17-3 Magnets Sm 2 Fe 17 X 3 (X=C, N) by Substituting La or Ce for Sm

Designing a permanent magnet with reduced critical rare-earth content is of paramount importance in the development of cost-effective modern technologies. By performing comprehensive first-principles calculations, we investigate the potential avenues for reducing the critical rare-earth content in Sm 2 Fe 17 N 3 and Sm 2 Fe 17 C 3 by making a La or Ce substitution for Sm. The calculated magnetic properties of base compounds are in good agreement with the previous low-temperature (4.2-K) experimental measurements, and they show a large axial anisotropy. Although La or Ce substitution results in a slight reduction of magnetic anisotropy, the magnetic moments of Fe atoms mostly remain unchanged. Specifically, large axial anisotropies of 7.2 and 4.1 MJ/m 3 are obtained for SmCeFe 17 N 3 and SmLaFe 17 N 3 , respectively. These values of anisotropies are comparable to the state-of-the-art permanent magnet Nd 2 Fe 14 B. The foremost limitation of Sm 2 Fe 17 X 3 magnets for practical application is the formation nitrogen or carbon vacancies at high temperatures. By calculating the N- (C)- vacancy formation energy, we show that La or Ce substitution enhances the vacancy formation energy. Here, this enhanced vacancy formation energy will likely improve the thermodynamic stability of these alloys at high temperatures. Therefore, La- or Ce-substituted Sm 2 Fe 17 C 3 and Sm 2 Fe 17 N 3 compounds are promising candidates for high-performance permanent magnets with substantially reduced rare-earth content.

36 MATERIALS SCIENCE↗

Structural Stability of Tin-Lead Halide Perovskite Solar Cells

One of the key features that makes halide perovskite solar cells such an attractive and intensely researched photovoltaic (PV) technology, is the tunability of the bandgap of these halide perovskite materials [1], [2]. Shortly after it was established that the bandgap could be increased to 1.7-1.8 eV, investigations into the application for silicon based tandem solar cells launched. Within a few years, conversion efficiencies of up to 28 % have been reported [3]. Concurrently, the interest in commercial application of this technology emerged and have rapidly increased. Whereas there are advantages to piggy backing on an established PV technology such as silicon, efforts to develop all-perovskite tandem solar cells are of considerable interest. Partly substituting the metal cation in the ABX3 perovskite enables the low bandgap absorbers required for an all-perovskite tandem solar cell. One common approach is to partially substitute the lead with tin, however these materials often suffered from poor stability. Therefore the development of an efficient, stable mixed tin-lead perovskite is key to enabling all-perovskite tandem solar cells.

degradation↗