Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Interaction effects and quantum phase transitions in topological insulators

We study strong correlation effects in topological insulators via the Lanczos algorithm, which we utilize to calculate the exact many-particle ground-state wave function and its topological properties. We analyze the simple, noninteracting Haldane model on a honeycomb lattice with known topological properties and demonstrate that these properties are already evident in small clusters. Next, we consider interacting fermions by introducing repulsive nearest-neighbor interactions. A first-order quantum phase transition was discovered at finite interaction strength between the topological band insulator and a topologically trivial Mott insulating phase by use of the fidelity metric and the charge-density-wave structure factor. We construct the phase diagram at T=0 as a function of the interaction strength and the complex phase for the next-nearest-neighbor hoppings. Finally, we consider the Haldane model with interacting hard-core bosons, where no evidence for a topological phase is observed. An important general conclusion of our work is that despite the intrinsic nonlocality of topological phases their key topological properties manifest themselves already in small systems and therefore can be studied numerically via exact diagonalization and observed experimentally, e.g., with trapped ions and cold atoms in optical lattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin waves in micro-structured yttrium iron garnet nanometer-thick films

We investigated the spin-wave propagation in a micro-structured yttrium iron garnet waveguide of 40 nm thickness. Utilizing spatially-resolved Brillouin light scattering microscopy, an exponential decay of the spin-wave amplitude of (10.06 ± 0.83) μm was observed. This leads to an estimated Gilbert damping constant of α=(8.79±0.73)×10{sup −4}, which is larger than damping values obtained through ferromagnetic resonance measurements in unstructured films. The theoretically calculated spatial interference of waveguide modes was compared to the spin-wave pattern observed experimentally by means of Brillouin light scattering spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-piston problem for a ferromagnetic thin film: Shock waves and solitons

In this report the unsteady, nonlinear magnetization dynamics induced by spin injection in an easy-plane ferromagnetic channel subject to an external magnetic field are studied analytically. Leveraging a dispersive hydrodynamic description, the Landau-Lifshitz equation is recast in terms of hydrodynamic-like variables for the magnetization's perpendicular component (spin density) and azimuthal phase gradient (fluid velocity). Spin injection acts as a moving piston that generates nonlinear, dynamical spin textures in the ferromagnetic channel with downstream quiescent spin density set by the external field. In contrast to the classical problem of a piston accelerating a compressible gas, here, variable spin injection and field lead to a rich variety of nonlinear wave phenomena from oscillatory spin shocks to solitons and rarefaction (expansion) waves. A full classification of solutions is provided using nonlinear wave modulation theory by identifying two key aspects of the fluid-like dynamics: subsonic/supersonic conditions and convex/nonconvex hydrodynamic flux. Familiar waveforms from the classical piston problem such as rarefaction waves and shocks manifest in their spin-based counterparts as smooth and highly oscillatory transitions, respectively, between two distinct magnetic states. The spin shock is an example of a dispersive shock wave, which arises in many physical systems. New features without a gas dynamics counterpart include composite wave complexes with “contact” spin shocks and rarefactions. Magnetic supersonic conditions lead to two pronounced piston edge behaviors including a stationary soliton and an oscillatory wave train. These coherent wave structures have physical implications for the generation of high frequency spin waves from pulsed injection and persistent, stable stationary and/or propagating solitons in the presence of magnetic damping. The analytical results are favorably compared with numerical simulations.

36 MATERIALS SCIENCE↗

The response of plasma density to breaking inertial gravity wave in the lower regions of ionosphere

We present a three-dimensional numerical study for the E and lower F region ionosphere coupled with the neutral atmosphere dynamics. This model is developed based on a previous ionospheric model that examines the transport patterns of plasma density given a prescribed neutral atmospheric flow. Inclusion of neutral dynamics in the model allows us to examine the charge-neutral interactions over the full evolution cycle of an inertial gravity wave when the background flow spins up from rest, saturates and eventually breaks. Using Lagrangian analyses, we show the mixing patterns of the ionospheric responses and the formation of ionospheric layers. The corresponding plasma density in this flow develops complex wave structures and small-scale patches during the gravity wave breaking event.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shock compression response of an insensitive high explosive single crystal: 1,1-diamino-2,2-dinitroethene (FOX-7)

Insensitive high explosives (IHEs) – that do not compromise performance – are of immense interest as a safer alternative to conventional high explosives, such as pentaerythritol tetranitrate (PETN) and cyclotrimethylenetrinitramine (RDX). Despite the strong interest in using IHEs, shock compression experiments on IHE single crystals have not been reported. To address this need, plate impact experiments were conducted to measure wave profiles in 1,1-diamino-2,2-dinitroethene (FOX-7) single crystals – a representative IHE crystal – shocked to 21 GPa longitudinal stress. Particle velocity histories, measured using laser interferometry, show a clear two-wave structure (elastic-inelastic response) at modest stresses (<3.8 GPa). Wave profiles at higher stresses show a single (overdriven) wave. Measured shock velocities and wave profiles provide accurate Hugoniot data to 21 GPa. The measured wave profiles to 21 GPa show no sign of energy release due to chemical decomposition and constitute the first demonstration of an IHE single crystal insensitivity under plane shock compression. Numerical simulations using a phenomenological material model developed for FOX-7 showed good agreement with the measured wave profiles. The experimental results and continuum simulations presented here constitute a significant first step in gaining insight into the shock compression response of IHE single crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Status of High Power Tests of Normal Conducting Single-Cell Structures

We report the results of ongoing high power tests of single-cell standing wave structures. These tests are part of an experimental and theoretical study of rf breakdown in normal conducting structures at 11.4 GHz. The goal of this study is to determine the maximum gradient possibilities for normal-conducting rf powered particle beam accelerators. The test setup consists of reusable mode launchers and short test structures powered by SLACs XL-4 klystron. The mode launchers and structures were manufactured at SLAC and KEK and tested at the SLAC klystron test laboratory.

43 PARTICLE ACCELERATORS↗

Korteweg de Vries Burgers equation in multi-ion and pair-ion plasmas with Lorentzian electrons

Korteweg de Vries Burgers equation for multi-ion and pair-ion plasmas has been derived using reductive perturbation technique. The kinematic viscosities of both positive and negative ions are taken into account. Generalized Lorentzian distribution is assumed for the electron component, accounting for deviation from Maxwellian equilibrium, parametrized via a real parameter {kappa}. The modification in the strength of shock structure is presented. A comprehensive comparison between the profiles of shock wave structure in multi-ion and pair-ion plasmas, (for the Maxwellian electrons to Lorentzian electrons), is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isomorphic phase transformation in shocked cerium using molecular dynamics

Cerium (Ce) undergoes a significant ({approx}16%) volume collapse associated with an isomorphic fcc-fcc phase transformation when subject to compressive loading. We present here a new Embedded Atom Method (EAM) potential for Cerium that models two minima for the two fcc phases. We show results from its use in Molecular Dynamics (MD) simulations of Ce samples subjected to shocks with pressures ranging from 0.5 to 25 GPa. A split wave structure is observed, with an elastic precursor followed by a plastic wave. The plastic wave causes the expected fcc-fcc phase transformation. Comparisons to experiments and MD simulations on Cesium (Cs) indicate that three waves could be observed. The construction of the EAM potential may be the source of the difference.

36 MATERIALS SCIENCE↗

A high power Ka band millimeter wave generator with low guiding magnetic field

A slow wave type gigawatt millimeter wave generator is proposed in this paper. In order to increase power capacity, overmoded slow wave structures (SWSs) with larger diameter have been used. Taking advantage of the ''surface wave'' property of overmoded SWSs, the TM{sub 01} mode can be selected to be the operating mode. Calculations have also been carried out to choose a proper low operating magnetic field strength, and it agrees with particle in cell (PIC) simulations. Main structure parameters of the device are optimized by PIC simulations. A typical simulation result is that, at the beam parameters of 600 keV and 5.05 kA, and guiding magnetic field of 0.85 T, a Ka band millimeter wave with an output power of 1.05 GW is generated, yielding a conversion efficiency of about 35%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear Alfvén wave dynamics in plasmas

Nonlinear Alfvén wave dynamics is presented using Lagrangian fluid approach in a compressible collisional magnetized plasma. In the framework of two fluid dynamics, finite electron inertia is shown to serve as a dispersive effect acting against the convective nonlinearity. In a moving frame, the Alfvén wave can, therefore, form an arbitrarily strong amplitude solitary wave structure due to the balance between nonlinearity and dispersion. Weak amplitude Alfvén waves are shown to be governed by a modified KdV equation, which extends for finite dissipation to a mKdV-Burgers equation. These equations have well known solutions. Next, we have analyzed the fourth order nonlinear Alfvén wave system of equations both numerically and by approximation method. The results indicate a collapse of the density and magnetic field irrespective of the presence of dispersion. The wave magnetic field, however, appears to be less singular showing collapse only when the dispersive effects are negligible. These results may contribute to our understanding of the generation of strongly localized magnetic fields (and currents) in plasmas and are expected to be of special importance in the astrophysical context of magnetic star formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of voltage rise time on microwave generation in relativistic backward wave oscillator

In relativistic backward wave oscillators (RBWOs), although the slow wave structure (SWS) and electron beam determine the main characteristics of beam-wave interaction, many other factors can also significantly affect the microwave generation process. This paper investigates the influence of voltage rise time on beam-wave interaction in RBWOs. Preliminary analysis and PIC simulations demonstrate if the voltage rise time is moderately long, the microwave frequency will gradually increase during the startup process until the voltage reaches its amplitude, which can be explained by the dispersion relation. However, if the voltage rise time is long enough, the longitudinal resonance of the finitely-long SWS will force the RBWO to work with unwanted longitudinal modes for a while and then gradually hop to the wanted longitudinal mode, and this will lead to an impure microwave frequency spectrum. Besides, a longer voltage rise time will delay the startup process and thus lead to a longer microwave saturation time. And if unwanted longitudinal modes are excited due to long voltage rise time, the microwave saturation time will be further lengthened. Therefore, the voltage rise time of accelerators adopted in high power microwave technology should not be too long in case unwanted longitudinal modes are excited.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crab Cavities for Linear Colliders

Crab cavities have been proposed for a wide number of accelerators and interest in crab cavities has recently increased after the successful operation of a pair of crab cavities in KEK-B. In particular crab cavities are required for both the ILC and CLIC linear colliders for bunch alignment. Consideration of bunch structure and size constraints favour a 3.9 GHz superconducting, multi-cell cavity as the solution for ILC, whilst bunch structure and beam-loading considerations suggest an X-band copper travelling wave structure for CLIC. These two cavity solutions are very different in design but share complex design issues. Phase stabilisation, beam loading, wakefields and mode damping are fundamental issues for these crab cavities. Requirements and potential design solutions will be discussed for both colliders.

43 PARTICLE ACCELERATORS↗

Development of X-Band Dielectric-Loaded Accelerating Structures

This paper presents a progress report on the development and testing of X-band dielectric-loaded accelerating structures. Recent tests on several quartz DLA structures with different inner diameters are reported. Designs for gap-free DLA structures are presented. Also, planned new experiments are discussed, including higher gradient traveling-wave and standing-wave structures and special grooved structures for multipactor suppression.

43 PARTICLE ACCELERATORS↗

Solitary and shock waves in magnetized electron-positron plasma

An Ohm's law for electron-positron (EP) plasma is obtained. In the framework of EP magnetohydrodynamics, we investigate nonrelativistic nonlinear waves' solutions in a magnetized EP plasma. In the collisionless limit, quasistationary propagating solitary wave structures for the magnetic field and the plasma density are obtained. It is found that the wave amplitude increases with the Mach number and the Alfvén speed. However, the dependence on the plasma temperature is just the opposite. Moreover, for a cold EP plasma, the existence range of the solitary waves depends only on the Alfvén speed. For a hot EP plasma, the existence range depends on the Alfvén speed as well as the plasma temperature. In the presence of collision, the electromagnetic fields and the plasma density can appear as oscillatory shock structures because of the dissipation caused by the collisions. As the collision frequency increases, the oscillatory shock structure becomes more and more monotonic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Ka-band TM{sub 02} mode relativistic backward wave oscillator with cascaded resonators

By combining the Cerenkov-type generator with the cascaded resonators, this paper proposes a Ka-band relativistic backward wave oscillator operating under the guide magnetic field 1.0 T with high power handling capability and high conversion efficiency. It is found that TM{sub 02} can be selected as the operation mode in order to increase the power handling capability and provide sufficient coupling with the electron beam. In slow wave structure (SWS), ripples composed of semicircle on top of the rectangle enhance the wave-beam interaction and decrease the intensity of the electric field on the metallic surface. Taking advantage of the resonator cascades, the output power and the conversion efficiency are promoted greatly. The front cascaded resonators efficiently prevent the power generated in SWS from leaking into the diode region, and quicken the startup of the oscillation due to the premodulation of the beam. However, the post cascade slightly postpones the startup because of the further energy extraction from the electron beam. The numerical simulation shows that generation with power 514 MW and efficiency 41% is obtained under the diode voltage 520 kV and current 2.4 kA. And the microwave with the pure frequency spectrum of 29.35 GHz radiates in the pure TM{sub 01} mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GPU-based simulation of the two-dimensional unstable structure of gaseous oblique detonations

In this paper, the two-dimensional structure of unstable oblique detonations induced by the wedge from a supersonic combustible gas flow is simulated using the reactive Euler equations with a one-step Arrhenius chemistry model. A wide range of activation energy of the combustible mixture is considered. Computations are performed on the Graphical Processing Unit (GPU) to reduce the simulation runtimes. A large computational domain covered by a uniform mesh with high grid resolution is used to properly capture the development of instabilities and the formation of different transverse wave structures. After the initiation point, where the oblique shock transits into a detonation, an instability begins to manifest and in all cases, the left-running transverse waves first appear, followed by the subsequent emergence of right-running transverse waves forming the dual-head triple point structure. This study shows that for low activation energies, a long computational length must be carefully considered to reveal the unstable surface due to the slow growth rate of the instability. For high activation energies, the flow behind the unstable oblique detonation features the formation of unburnt gas pockets and strong vortex-pressure wave interaction resulting in a chaotic-like vortical structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

FREE SURFACE VELOCIMETRY CORRECTIONS FOR LOW PRESSURE SHOCKS

We consider how to interpret measured free surface velocities to estimate what a relatively weak shock (with an elastic-plastic two-wave structure, approx5-30 GPa) would have looked like in an infinite sample. Hysteresis and nonlinear wave interactions introduce effects (inexact velocity doubling and the delay, partial reflection, and reverberation of waves) whose magnitudes can be estimated with simple models. We argue, and demonstrate in a simulated test case, that these estimates can eliminate most of the systematic error introduced by the free surface during loading.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗