SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract We consider a system rotating at extremely high angular velocity, so that its matter is found mostly at the light-cylinder. We posit that it can be described by quantum fields confined to the two-dimensional cylindrical surface rotating about its symmetry axis. We apply this model to study the electromagnetic radiation. In particular, we compute the photon spectrum emitted by the quark-gluon plasma.
Explore the source record for details and available documents.
Abstract Tungsten ditelluride (WTe 2 ) is an atomically layered transition metal dichalcogenide whose physical properties change systematically from monolayer to bilayer and few-layer versions. In this report, we use apertureless scattering-type near-field optical microscopy operating at Terahertz (THz) frequencies and cryogenic temperatures to study the distinct THz range electromagnetic responses of mono-, bi- and trilayer WTe 2 in the same multi-terraced micro-crystal. THz nano-images of monolayer terraces uncovered weakly insulating behavior that is consistent with transport measurements. The near-field signal on bilayer regions shows moderate metallicity with negligible temperature dependence. Subdiffractional THz imaging data together with theoretical calculations involving thermally activated carriers favor the semimetal scenario with $$\Delta \approx -10\,{{{\rm{meV}}}}$$ Δ ≈ − 10 meV over the semiconductor scenario for bilayer WTe 2 . Also, we observed clear metallic behavior of the near-field signal on trilayer regions. Our data are consistent with the existence of surface plasmon polaritons in the THz range confined to trilayer terraces in our specimens. Finally, data for microcrystals up to 12 layers thick reveal how the response of a few-layer WTe 2 asymptotically approaches the bulk limit.
Conventional channel-based microfluidic platforms have gained prominence in controlling the bottom-up formation of phospholipid based nanostructures including liposomes. However, there are challenges in the production of liposomes from rapidly scalable processes. These have been overcome using a vortex fluidic device (VFD), which is a thin film microfluidic platform rather than channel-based, affording ~110 nm diameter liposomes. The high yielding and high throughput continuous flow process has a 45° tilted rapidly rotating glass tube with an inner hydrophobic surface. Processing is also possible in the confined mode of operation which is effective for labelling pre-VFD-prepared liposomes with fluorophore tags for subsequent mechanistic studies on the fate of liposomes under shear stress in the VFD. In situ small-angle neutron scattering (SANS) established the co-existence of liposomes ~110 nm with small rafts, micelles, distorted micelles, or sub-micelle size assemblies of phospholipid, for increasing rotation speeds. The equilibria between these smaller entities and ~110 nm liposomes for a specific rotational speed of the tube is consistent with the spatial arrangement and dimensionality of topological fluid flow regimes in the VFD. The prevalence for the formation of ~110 nm diameter liposomes establishes that this is typically the most stable structure from the bottom-up self-assembly of the phospholipid and is in accord with dimensions of exosomes.
A recently developed imaging neutral particle analyzer (INPA) on the DIII-D tokamak (Du 2018 Nucl. Fusion 58 082006) enables fast ion velocity-space tomography of high fidelity at the interrogated phase space. To accomplish this, the spatial and energy depending fast ( E < 80 keV) neutral flux towards the INPA stripping foils is calculated with FIDASIM and a newly developed code INPASIM simulates the INPA instrumental response to this neutral flux. Included in INPASIM is the neutral-foil interaction, the Larmor orbit tracing between the foil and the phosphor, the phosphor response to the incident ion flux as well as camera focusing. Benefiting from heavy, localized velocity-space weights and excellent signal to noise, computed tomography using the Ridge regression method is able to successfully reconstruct fine-scale velocity-space structures produced by multiple neutral beams separated by as small as ~3 keV in tests. Applying the inversion method to a sawtooth crash event reveals a significant profile flattening of confined passing particles across q = 1 flux surface, as well as a redistribution of fast ions into the trapped orbits at the plasma edge close to the last closed flux surface.
Molecular layer deposition (MLD) is able to produce ultrathin polymer films with control over thickness, cross-linking, and chemical composition. With these capabilities, MLD should be useful in the fabrication of novel polymer membranes on porous supports. However, confining a continuous MLD film to the surface of porous substrates is difficult because of MLD film growth in the pores. The deposition in the pores lowers the conductance of the porous support. This paper presents a method to deposit continuous polymer films on top of porous substrates. In this method, Al2O3 plasma-enhanced atomic layer deposition (PE-ALD) using trimethylaluminum and oxygen plasma as the reactants was first used to cap the pores of the substrate. Subsequently, a polyamide MLD film was deposited on the Al2O3 PE-ALD capping layer using m-phenylenediamine and trimesoyl chloride as the reactants. The Al2O3 pore caps were then removed from the porous substrate by etching from the backside using a timed exposure to a dilute sodium hydroxide solution. This method was demonstrated using anodic aluminum oxide (AAO) and polyethersulfone (PES) porous substrates. Al2O3 PE-ALD film growth was limited to the top of the porous substrate, resulting in rapid surface recombination or high sticking coefficients for the reactive plasma species within the pores. Gas permeance measurements confirmed the pore capping of the AAO substrates. The reopening of the pores by dissolving the Al2O3 pore caps with a sodium hydroxide solution was monitored using gas permeance versus etch time. The removal of the Al2O3 pore caps from the PES substrates could also dissolve the Al2O3 layer underneath the MLD film. The loss of this Al2O3 layer led to the detachment of the MLD film from the PES substrate. However, the MLD film could be anchored to the PES support at fractures located in the Al2O3 film prior to the MLD. The Al2O3 film fracture allowed the MLD film to anchor firmly to the PES substrate by MLD in the pores of the PES porous substrate. The distance between the anchor points was a function of fracture density. This distance could be controlled by applying a tensile stress to the Al2O3 PE-ALD film to fracture the film through sample bending. This method produced firmly anchored polymer MLD films on top of the PES porous substrates.
Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on rectangular Westerly granite blocks (width=depth=4.0", height=2.0"). Liquid nitrogen was poured in a small, 1"-diameter copper cup attached to the top of the sample, and the resulting acoustic emissions (AEs) and temperature changes on the surface of the sample were monitored. Several confining stresses were applied bi-axially to the sides of the samples so that the onset of AE activity and the stress applied to the sample were correlated. The obtained AEs were used to determine the microcracking source locations and amplitude, and the associated moment tensors. Included in this submission are the animations of the AE locations and graphics displaying the measured temperature-AE activity changes for different stresses.
This is the final technical report for this DOE award. The motion of dust particles in a laboratory plasma has been studied for nearly 30 years and has led to the discovery of strongly-coupled crystalline structures and nonequilibrium dynamics governed by gravitational, hydrodynamic, and electrostatic forces. Many of the inter-particle forces are complex; they can be non-reciprocal, and non-additive. Deciphering the mélange of particle interactions has been a challenging task, nevertheless, magnetized dusty plasmas remains an open challenge with limited understanding. With applications ranging from magnetically-confined plasmas for fusion to near-surface planetary environments, this research field is ripe for well-controlled, laboratory experiments and new theoretical tools. In collaboration with the MDPX experiment at Auburn University, this proposal aims to tease apart both the known and unknown forces that drive dusty plasmas in magnetized environments using high-resolution, three-dimensional imaging and particle tracking coupled with modern dynamical inference and machine learning techniques.
Light-matter interactions in layered and two-dimensional materials allows one to achieve extreme optical confinement approaching the atomic scale, enabling exploration of new materials phenomena. Layered narrow bandgap and zero bandgap materials, such as black phosphorus and graphene, support unusual and intriguing quantum-confined electronic states in thin layers and surface electronic states. The incomplete screening of applied electrostatic fields in ultrathin materials permits the exploration of light-matter interactions at high electric fields and over a wide range of carrier densities in a single sample, facilitating exploration of the optical and plasmonic properties of ultrathin and layered materials under electrochemical potential control. We have made advances in understanding the nature of optical interband and intraband plasmon excitations in layered materials such as graphene, black phosphorus, molybdenum diselenide, and molybdenum ditelluride.
Polymer additives [like polyethylene oxide (PEO)] are widely used for smooth electrode deposition in aqueous zinc and many other battery systems. However, the precise mechanism by which they regulate morphology and suppress dendrite formation remains unclear. In this study, the knowledge gap is addressed by using in situ electrochemical atomic force microscopy to directly observe the interfacial evolution during Zn electrodeposition and polymer adsorption on Cu substrates in the presence of varying concentrations of ZnSO 4 and PEO. Contrary to previous literature assumptions, which emphasize the binding to the growing Zn crystal surfaces or Zn 2+ ions, the results demonstrate that PEO smooths Zn films by promoting nucleation of (002)-oriented Zn platelets through interactions with the Cu substrate. Density functional theory simulations support this finding by showing that PEO adsorption on Cu modifies the interfacial energy of Zn/Cu/electrolyte interfaces, favoring the stabilization of Zn (002) on the Cu substrate, as well as confines Zn electrodeposition to a narrow near-surface region. In conclusion, these findings elucidate a novel design principle for electrode smoothing, emphasizing the importance of substrate selection paired with polymer additives that exhibit an attractive interaction with the substrate but minimal interaction with growing crystals, offering a mechanistic perspective for improved battery performance.
Excited electron dynamics at the semiconductor–molecule interface play a vital role in many solar energy conversion applications and beyond. First-principles dynamics simulation is used to study how excited electron dynamics in a type-II semiconductor–molecule interface is affected when the surface of a bulk semiconductor is replaced with that of a quantum dot. In particular, the interface between the hydrogen-terminated silicon(111) surface and a simple organic molecule is investigated. Quantum confinement was found to significantly slow down the excited electron relaxation and the interfacial transfer of the excited electron. Additionally, the role of decoherence was examined. The decoherence affects the dynamics much more significantly for the interface with the quantum dot, while the bulk surface case is affected only marginally by it. Finally, compared to the excited electron relaxation within the quantum dot, the decoherence effect was found to slow down the interfacial transfer from the quantum dot to the molecule by more than an order of magnitude, exhibiting a significant quantum Zeno effect.
Understanding particle drifts in a non-symmetric magnetic field is of primary interest in designing optimized stellarators in order to minimize the neoclassical radial loss of particles. Quasisymmetry and omnigeneity, two distinct properties proposed to ensure radial localization of collisionless trapped particles in stellarators, have been explored almost exclusively for magnetic fields with nested flux surfaces. In this work, we examine radial particle confinement when all field lines are closed. We then study charged particle dynamics in the special case of a non-symmetric vacuum magnetic field with closed field lines obtained recently by Weitzner & Sengupta ( Phys. Plasmas , vol. 27, 2020, 022509). These magnetic fields can be used to construct magnetohydrodynamic equilibria for low pressure. Expanding in the amplitude of the non-symmetric fields, we explicitly evaluate the omnigeneity and quasisymmetry constraints. We show that the magnetic field is omnigeneous in the sense that the drift surfaces coincide with the pressure surfaces. However, it is not quasisymmetric according to the standard definitions.
Abstract In this contribution, the relaxation and diffusional behaviors of low viscous fluids, water and methanol confined into mesoporous silica and controlled size pore glass were investigated. The engineered porous systems are relevant to geologically important subsurface energy materials. The engineered porous proxies were characterized by Brunauer–Emmett–Teller (BET) surface analyzer, nuclear magnetic resonance (NMR) spectroscopy, and electron microscopy (EM) to determine surface area, pore-wall protonation and morphology of these materials, respectively. The confined behavior of the low viscous fluids was studied by varying pore diameter, fluid-to-solid ratio, temperature, and pressure, and then compared to bulk liquid state. Both relaxation and diffusion behaviors for the confined fluids showed increasing deviation from pure bulk fluids as the fluid-to-solid ratio was decreased, and surface-to-volume ratio ( S / V ) was varied. Variable pressure deuteron NMR relaxation of confined D 2 O and confined methanol, deuterated at the hydroxyl or methyl positions, were performed to exploit the sensitivity of the deuteron quadrupole moment to molecular rotation. The methanol results demonstrated greater pressure dependence than those for water only in bulk. The deviations from bulk liquid behavior arise from different reasons such as confinement and the interactions between confined fluid and the nano-pore wall. The results of the present report give insight into the behavior of low viscosity fluid in nano-confined geometries under different state conditions.
In addition to the topologically protected linear dispersion, a band-bending-confined two-dimensional electron gas with tunable Rashba spin-splitting (RSS) was found to coexist with the topological surface states on the surface of topological insulators (TIs). Here, in this paper, we report the observation of large bilinear magnetoresistance (BMR) in Bi 2 Se 3 films decorated with transition-metal atoms. The magnitude of the BMR sensitively depends on the type and amount of atoms deposited, with a maximum achieved value close to those of strong Rashba semiconductors. Our first-principles calculations reproduce the quantum well states and reveal sizable RSS in all Bi 2 Se 3 heterostructures with broken inversion symmetry. Our results show that charge-spin interconversion through RSS states in TIs can be fine tuned through surface atom deposition and easily detected via BMR for potential spintronic applications.
An apparatus and method is provided for coating a surface of a material with a film of porous coordination polymer. A first substrate having a first surface to be coated is positioned in a processing chamber such that the first surface is placed in a substantially opposing relationship to a second surface. In some embodiments, the second surface is provided by a wall of the processing chamber, and in other embodiments the second surface is provided by a second substrate to be coated. The first substrate is held such that a gap exists between the first and second surfaces, and the gap is filled with at least one reaction mixture comprising reagents sufficient to form the crystalline film on at least the first surface. A thin gap (e.g., having a thickness less than 2 mm) between the first and second surfaces is effective for producing a high quality film having a thickness less than 100 μm. Confining the volume of the reaction mixture to a thin layer adjacent the substrate surface significantly reduces problems with sedimentation and concentration control. In some embodiments, the size, shape, or average thickness of the gap is adjusted during formation of the film in response to feedback from at least one film growth monitor.
A method is provided for coating a surface of a material with a film of porous coordination polymer. A first substrate having a first surface to be coated is positioned in a processing chamber such that the first surface is placed in an opposing relationship to a second surface. The second surface may be provided by a wall of the processing chamber, or in some cases the second surface may be provided by a second substrate to be coated. The first substrate is held such that a gap exists between the first and second surfaces, and the gap is filled with at least one reaction mixture comprising reagents sufficient to form the crystalline film on at least the first surface. A thin gap (e.g., less than 2 mm) between the first and second surfaces is effective for producing a high quality film having a thickness less than 100 μm. Confining the volume of the reaction mixture to a thin layer adjacent the substrate surface significantly reduces problems with sedimentation and concentration control. The size, shape, or average thickness of the gap may be adjusted during formation of the film in response to feedback from at least one film growth monitor.
The research was directed at understanding the role that nanoconfinement has on the dynamics and structure of liquids confined in nanometer size structures. Experiments were conducted using ultrafast infrared methods. The methods were two dimensional infrared (2D IR) spectroscopy and polarization pump-probe (PSPP) experiments. In addition FT-IR spectroscopy was used. To augment the experimental work, high level molecular dynamics simulations of the systems were conducted. The system used for confinement were nanoporous silica with essentially monodispersed pores. Pores of different diameters were studies, i.e., 2.5 nm to 8 nm. Water and organic liquids were investigated. The experiments were performed on a vibrational probe molecule, i.e., the CN stretch of the anion SeCN-. The 2D IR experiments measured spectral diffusion, which directly reported on the structural dynamics of the confined liquids. 2D IR was also used to perform chemical exchange measurements, which observed the formation and dissociation of molecular complexes with surface silanols. The PSPP experiments measured orientational relaxation of the probe molecule as well as it vibrational lifetime. All of the observables depended on the diameter of the pores and the type of liquid. The simulations of the observables provided detailed structural information on the structure of the confined liquids and there interactions with the surfaces. In addition to the study of the confinement in nanopores, water in hydrogels was also studied. The same experimental methods were used along with MD simulations. It was found the influence of hydrogels on water did not come from confinement of the water in the hydrogel polymer network, but rather from the interactions of the water with the individual monomers that compose the polymer. In addition, the temperature dependence of a polymer/water system was tracked from below to above the lower critical solution temperature to observe the nature of the phase separated polymer and how water responded to the phase separation.
The chemical and thermomechanical instabilities of metal halide perovskites represent barriers to long operational lifetimes of perovskite-based devices. There is no single magic bullet to address these instabilities, and so multiple complementary strategies must be undertaken. I will discuss the work by our research group to address these instabilities at multiple length scales, including the effects of the molecular structure and functionality of additives on their interactions with perovskite surfaces, the enhancement of mechanical toughness of perovskite layers by compositing with polymeric nanofibers, and the use of confined volume printing to rapidly produce perovskite films with large grains and reduced surface area of grain boundaries detrimental to stability. Together, these approaches provide one possibly pathway toward significantly increasing the operational lifetimes of perovskite-based devices.