Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

CO and H 2 adsorption on Au-Ni bimetallic surfaces: a combined experimental and DFT theoretical study

Au-Ni bimetallic thin films were grown on refractory metal substrates. CO and H 2 adsorption on Au-Ni bimetallic surfaces have been studied by a combination of in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations. It is found CO desorption peak shifts from 413 K on pure Ni surfaces to 293 K on the isolated Ni atoms formed by alloying with Au atoms. The sharp decrease of CO desorption temperature on Au-Ni surfaces with increasing Au coverage is caused by the change of the favored CO adsorption sites from bridge/hollow sites on pure Ni surfaces to Ni top sites on Au-Ni bimetallic surfaces. In situ PM-IRRAS shows two CO adsorption bands on Au sites at 2119 cm −1 and 2103 cm −1 on Au-Ni surfaces at 80 K, which are due to CO bound on under-coordinated Au atoms and electron negatively charged Au sites modified with nearby Ni atoms, respectively. Even with the Au-Ni surface temperature at as low as 100 K, CO adsorption induced Ni surface segregation has been observed by in situ PM-IRRAS. Furthermore, DFT calculation results discover the adsorption energy of CO on Ni top sites continues to decrease with increasing Au coverage due to the geometric ensemble effect and the lowered d-band center after Ni alloying with Au. H 2 desorption temperature decreases from 363 K on pure Ni thin films to 302 K with increasing Au coverage to 0.6 ML. A new H 2 peak appears at around 170 K on the Au-Ni surfaces with Au coverages between 0.6 ML and 0.9 ML. This new H 2 TPD peak is assigned to H 2 desorption from the totally isolated Ni sites. With Au coverage above 1.5 ML, there is no any H 2 desorption detected. Finally, the combined surface science studies and DFT calculations provide new insights into the surface structure-activity correlation of Ni-base bimetallic surface alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure–Activity Relationships for Ethanol Dehydrogenation to Acetaldehyde by Silica-Supported Zinc Oxide Catalysts

Silica-supported ZnO efficiently catalyzes the nonoxidative dehydrogenation of ethanol to acetaldehyde, which is relevant for production of 1,3-butadiene from bioethanol. Characterization with in situ spectroscopies under dehydrated conditions (high sensitivity-low energy ion scattering (HS-LEIS), diffuse reflectance (DR) UV–vis, X-ray absorption spectroscopy (XAS), diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), inelastic neutron scattering (INS), and UV Raman), and ammonia adsorption probed by temperature-programmed desorption followed by DRIFTS and mass spectrometry (DRIFTS-MS NH 3 -TPD), and DFT calculations revealed that the supported ZnO x phase was present as isolated surface ZnO x sites on SiO 2 , with the vast majority coordinated by two siloxane bonds and one silicon atom with two nonbridging oxygens ((≡SiO) 2 Zn 2+ O 2 Si=), anchored at 4-, 5-, and 6-membered siloxane rings. A minor fraction of surface ZnO x sites possessed Lewis acidity, and even fewer sites possessed a Bro̷nsted acidic Zn(OH) + Si moiety. Ethanol temperature-programmed surface reaction-mass spectrometry (TPSR-MS) with various oxidative or ethanol reaction pretreatments indicated that only sites with Lewis and Bro̷nsted acidic character (Zn(OH) + Si) were active for ethanol dehydrogenation, while the majority surface (≡SiO) 2 Zn 2+ O 2 Si= sites were inactive. Greater heterogeneity among all surface ZnO x sites, as assessed by in situ DR UV–vis spectroscopy, was associated with a greater number of ZnO x sites that were active for ethanol dehydrogenation as well as lower enthalpic barriers for acetaldehyde production among the most active surface ZnO x sites. Turnover frequencies and the apparent activation energy for ethanol dehydrogenation were determined from steady-state kinetics. Together, these findings suggested that anchoring inactive surface (≡SiO) 2 Zn 2+ O 2 Si= sites on the silica support caused a greater number of active surface ZnO x sites to adopt a more strained configuration, promoting ethanol dehydrogenation catalysis. Pretreatments and catalysts that promoted desorption of ethanol during TPSR, taken as a marker of surface dehydroxylation, were associated with an increased number of the most active surface (Zn(OH) + Si) sites. Such findings suggested that inactive surface ZnO x sites were activated for ethanol dehydrogenation by dehydroxylation of the support and/or decreased coordination to hemilabile siloxane ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complete wetting of Pt(111) by nanoscale liquid water films

The melting and wetting of nanoscale crystalline ice films on Pt(111) that are transiently heated above the melting point using nanosecond laser pulses are studied with infrared refection absorption spectroscopy (IRAS) and Kr temperature programmed desorption (TPD). The as-grown crystalline ice films consist of isolated nanoscale ice crystallites embedded in a hydrophobic water monolayer. Upon heating above the melting point, these ice crystallites rapidly melt to form nanoscale droplets of liquid water. Rapid cooling of the system to cryogenic temperatures after each laser pulse quenches the water films and allows them to be interrogated with IRAS, Kr TPD and other ultrahigh vacuum surface science techniques. With each successive heat pulse, these liquid drops spread across the surface until it is entirely covered with multilayer water films after several pulses. These results, which show that nanoscale water films completely wet Pt(111), are in contrast to molecular dynamics simulations predicting partial wetting of nanoscale water drops on a hydrophobic water monolayer. The results provide valuable new insights into the wetting characteristics of nanoscale water films on a clean, well-characterized single crystal surface.

Xu, Yuntao↗

Dipole-Oriented Molecular Solids Can Undergo a Phase Change and Still Maintain Electrical Polarization

It has recently been demonstrated that nanoscale molecular films can spontaneously assemble to self-generate intrinsic electric fields that can exceed 10 8 V/m. These electric fields originate from polarization charges in the material that arise because the films self-assemble to orient molecular dipole moments. This has been called the spontelectric effect. Such growth of spontaneously polarized layers of molecular solids has implications for our understanding of how intermolecular interactions dictate the structure of molecular materials used in a range of applications, for example, molecular semiconductors, sensors, and catalysts. In this paper, we present the first in situ structural characterization of a representative spontelectric solid, nitrous oxide. Infrared spectroscopy, temperature-programmed desorption, and neutron reflectivity measurements demonstrate that polarized films of nitrous oxide undergo a structural phase transformation upon heating above 48 K. A mean-field model can be used to describe quantitatively the magnitude of the spontaneously generated field as a function of film-growth temperature, and this model also recreates the phase change. Finally, this reinforces the spontelectric model as a means of describing long-range dipole–dipole interactions and points to a new type of ordering in molecular thin films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating binding energies of adsorbed CO and H on model surfaces with CO/H 2 selectivity from co-electrolysis of CO 2 and H 2 O over copper–palladium bimetallic catalysts

Binding energies of adsorbed CO and H are key descriptors governing the activity and selectivity of the co-electrolysis of CO 2 and H 2 O to produce syngas with desired CO/H 2 ratios. Palladium hydride (PdH), which forms in situ at negative overpotentials, has been identified as the active Pd phase for CO 2 reduction to syngas. Herein, binding energies of CO and H are determined using temperature programmed desorption (TPD) of CO and H 2 from Pd(111), PdH/Pd(111), and Cu/PdH/Pd(111) under ultra-high vacuum (UHV) conditions. TPD results reveal that desorption of H 2 from subsurface PdH occurs at 460 K, while desorption from surface PdH is more facile at 320 K. CO desorption temperatures shift 20 K lower on PdH/Pd(111) compared to on Pd(111). The presence of 0.7 ML Cu further increases the desorption temperature of H 2 by 30 K while simultaneously reducing CO desorption temperatures by 70 K. Density functional theory (DFT) calculations show that CO adsorption onto Pd sites is hindered on the 0.7 ML Cu/PdH/Pd(111) surface while the kinetic barrier for H 2 desorption is increased. The trends in the binding energies of CO and H on model surfaces are consistent with electrochemical measurements of CuPd powder catalysts in a membrane electrode assembly (MEA), where H 2 evolution is reduced while CO production is enhanced compared to unmodified Pd catalysts. Overall, the results from model surface studies (TPD and DFT) provide a prediction and explanation for the activity and CO/H 2 ratios observed in electrochemical experiments. This study also demonstrates that CuPd is a promising catalyst with reduced Pd-loading to produce CO-rich syngas.

36 MATERIALS SCIENCE↗

Interactions on External MOF Surfaces: Desorption of Water and Ethanol from CuBDC Nanosheets

The external surfaces of metal-organic framework (MOF) materials are difficult to experimentally isolate due to the high porosities of these materials. MOF surface surrogates in the form of copper benzenedicarboxylate (CuBDC) nanosheets were synthesized using a bottomup approach and the surface interactions of water and ethanol were investigated by temperature programmed desorption (TPD). A method of analysis of diffusion-influenced TPD was developed to measure the desorption properties of these porous materials. This approach also allows the extraction of diffusion coefficients from TPD data. The transmission Fourier transform infrared spectra, powder X-ray diffraction patterns and TPD data indicate that water desorbs from CuBDC nanosheets with activation energies of 44±2 kJ/mol at edge sites and 58 ± 1 kJ/mol at external surface and internal and pore sites. Ethanol desorbs with activation energies of 58 ± 1 kJ/mol at internal pore sites and 66 ± 0.4 kJ/mol at external surface sites. Co-adsorption of water and ethanol was also investigated. The presence of ethanol was found to inhibit the desorption of water that results in a water desorption process with an activation energy of 68 ± 0.7 kJ/mol.

36 MATERIALS SCIENCE↗

Low temperature ethanol steam reforming: Selectivity control with lithium doping of Pt/m-ZrO 2

Lithium promoted 2%Pt/m-ZrO 2 catalysts previously observed to exhibit higher rates for the low temperature water-gas shift (LTS) were tested for the ethanol steam reforming with the aim of exploring the potential tuning of the selectivity. Characterization of catalysts having optimized Li content (0.5–0.75%Li) for LTS exhibited (a) weakened C—H bonding of formate, a proposed intermediate in the LTS mechanism, as shown by a shift in the ν(CH) band to lower wavenumbers, (b) a relatively low extent of blocking of Pt, as measured by the ν(CO) band intensity of Pt-CO, (c) increased basicity as measured by CO 2 temperature-programmed desorption with mass spectrometry, but not so high as to strongly inhibit CO 2 product removal, and finally (d) no evidence of electron transfer from Li to Pt. Here, for this study, the same catalysts were tested for ethanol steam reforming (ESR). Results show that Li could likewise weaken the C—C bond of the acetate intermediate, the analog of formate in LTS, and facilitate decarboxylation over decarbonylation altering the selectivity in favor of methanation. This trend was confirmed by fixed bed reaction testing, in-situ infrared spectroscopy experiments of transient ESR, and temperature-programmed ESR using MS. The Li-doped catalysts may be used to pre-reform ethanol prior to feeding to a methane steam reformer to increase the overall H 2 selectivity of the process. DRIFTS of steady state ESR revealed that deactivation occurs through losses in the Pt-support interface, thereby hindering the turnover of the acetate intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Na Promotion of Pt/m-ZrO 2 Catalysts for the Steam Reforming of Formaldehyde

The decomposition selectivity of formaldehyde during steam reforming was explored using unpromoted and sodium promoted Pt/m-ZrO 2 catalysts, and the Na content was varied (0.5%Na, 1%Na, 1.8%Na, 2.5%Na, and 5%Na). In situ DRIFTS experiments during temperature programmed reaction in flowing H 2 O revealed that formaldehyde is adsorbed at reduced defect sites on zirconia, where it is converted to formate species through the addition of labile bridging OH species. Formate species achieve a maximum intensity in the range of 125–175 °C, where only slight changes in intensity are observed. Above this temperature, the formate decomposition reactivity strongly depends on the Na loading, with the optimum loadings being 1.8%Na and 2.5%Na. CO 2 temperature programmed desorption results, as well as a greater splitting observed between the formate ν asym (OCO) and ν sym (OCO) bands in infrared spectroscopy, indicate greater basicity is induced by the presence of Na. This strengthens the interaction between the formate -CO 2 functional group and the catalyst surface, weakening the formate C-H bond. A shift in the ν(CH) band of formate to lower wavenumbers was observed by addition of Na, especially at 1.8%Na and higher loadings. This results in enhanced decarboxylation and dehydrogenation of formate, as observed in in situ DRIFTS, temperature-programmed reaction/mass spectrometry experiments of the steam reforming of formaldehyde, and fixed bed reaction tests. For example, 2.5%Na addition of 2.5% increased the CO 2 selectivity from 83.5% to 99.5% and the catalysts achieved higher stable conversion at lower temperature than NiO catalysts reported in the open literature. At 5%Na loading, Pt sites were severely blocked, hindering H-transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast MAS 1 H NMR Study of Water Adsorption and Dissociation on the (100) Surface of Ceria Nanocubes: A Fully Hydroxylated, Hydrophobic Ceria Surface

1 H nuclear magnetic resonance (NMR) spectroscopy was used to study hydroxylic surface species on ceria nanocubes, a crystalline, high-surface-area CeO 2 that presents mostly (100) facets. Water adsorption and desorption experiments in combination with fast magic angle spinning (MAS, 20–40 kHz) 1H NMR provide high-resolution 1 H spectra that allow the observation of ten resonance bands (water or hydroxyl) on or under the (100) surface. Assignments were made using a combination of adsorption and temperature-programmed desorption, quantitative spin counting, deuterium exchange, spin–lattice (T 1 ) and spin–spin (T 2 ) relaxation, and DFT calculations. In air, the (100) surface exists as a fully hydroxylated surface. Water adsorption and dissociation on dry ceria surfaces occur first at oxygen vacancies, but Ce 3+ centers are not required since water dissociation is barrier-less on the fully oxidized surface. Surface $-$OH functionality occurs in two resolved bands representing isolated $-$OH (1 ppm) and hydrogen-bonded $-$OH (9 ppm), the latter being dominant. Deuterium exchange of surface hydroxyls with D 2 O does not occur under mild or forcing conditions. Despite large differences in the T 1 of surface hydroxyls and physisorbed water, surface hydroxyl T 1 values are independent of the presence or absence of physisorbed water, demonstrating that the protons within these two functional group pools are not in intimate contact. These observations show that, once hydroxylated, the surface $-$OH functionality preferentially forms hydrogen bonds with surface lattice oxygen, i.e., the hydroxylated (100) surface of ceria is hydrophobic. Near this surface it is energetically more favorable for physisorbed water to hydrogen bond to itself rather than to the surface. DFT calculations support this notion. Impurity Na + remaining in incompletely washed ceria nanocubes increases the surface hydrophilicity. In conclusion, sharp, low-field resonances observed in spectra of noncalcined nanocubes arise from kinetically trapped subsurface $-$OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of Fe-0 Atoms, Clusters, and Nanoparticles with CC14 Multilayers on FeO(111)

The interaction of Fe0 atoms and clusters with CCl4 multilayers was investigated using a novel "atom dropping" method at 30 K over a FeO(111) thin film. Temperature programmed desorption experiments over a range of Fe0 and CCl4 coverages demonstrate a rich surface chemistry with several reaction products (C2Cl4, C2Cl6, OCCl2, CO, FeCl2, FeCl3) observed. X-ray photoelectron spectroscopy data show that the initial reactive interaction occurs spontaneously at 30 K, with the experimentally observed reaction products formed at higher temperature, in agreement with the results of theoretical calculations. The formation of OCCl2 and CO is concluded to occur through abstraction of O atoms from the generally inert FeO(111) substrate. The buffer layer assisted growth technique is used to show that the reactivity, and interestingly the reaction products, is determined by the size of Fe0 nanoparticles which interact with CCl4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removal of deuterium retained in boron powder by oxygen or high-temperature bakeout

Fuel retention in dust accumulated in fusion devices is a potential operational hazard. Boronization is one of the leading wall-conditioning candidates for future fusion devices. Fuel retention characteristics of boron dust must be studied to accurately understand the potential hazards of boron dust in fusion devices. We evaluated the retention of deuterium (D) in commercially available boron powder as a proxy for tritium retention in boron dust. Diffuse reflectance infrared Fourier transform spectroscopy revealed that boron powder between 300 and 500 K exposed to neutral hydrogen (H 2 ) gas retains H via B-H bonding. We utilized D 2 exposures of 17,400 L on the boron powder, which led to retention on the order of 0.5 g D per 100 kg B or 1.2 g D per m 2 B, as estimated from temperature programmed desorption measurements. We evaluated how powder bakeouts under ultra-high vacuum (UHV), or in an oxygen (O 2 ) or H 2 gas backfilled environment can remove the retained fuel. Bakeouts below 523 K under UHV exhibited poor D removal, promoting recapture of D 2 present as background gas in the chamber. Higher temperature bakeouts led to the removal of over 80% of the retained D within 3 days (623 K) or 1 h (723 K). Bakeouts at 423 K under an O 2 gas environment removed ∼150% more retained D from the boron powder, when compared to bakeouts conducted under UHV. These results suggest that efficient fuel removal from boron dust can be achieved by high-temperature bakeout (>623 K) or by bakeouts at lower temperature (423 K) under an O 2 environment.

Bakeout↗

Morphology-dependent phase transformation of y-Al2O3

The phase transformations of platelet- and rod-shaped ?-Al2O3 were investigated and compared to that of a commercial sample by XRD, BET surface area measurements, Transmission Electron Microscopy (TEM), solid state 27Al-NMR and ethanol temperature programmed desorption (TPD) after sequential annealing in air up to 1100 oC. After annealing at 1100 oC, commercial ?-Al2O3 mostly transformed into a-Al2O3 with drastic surface area reduction (from 200 m2/g to 25 m2/g). Interestingly, platelet- and rod-shaped ?-Al2O3 which showed exactly the same XRD patterns transformed into different phases upon the high temperature calcinations. Platelet-shaped ?-Al2O3 transformed into ?-phase while the rod-shaped ?-Al2O3 transformed into the d-phase and not to the a-polymorph. Both platelet- and rod-shaped aluminas retained significantly higher surface area (~60 m2/g) than the commercial one after the same treatment at 1100 oC. These results suggest that the phase transformation in ?-Al2O3 is strongly affected by not only the crystal structure of the starting material, but its morphology as well. Ethanol TPD from platelet- and rod-shaped alumina after 1100 oC annealing, showed significantly different desorption profiles which suggest different surface characteristics even though they had almost the same surface areas. These different phase transformations were also supported by solid state 27Al-NMR. After 1100oC annealing commercial alumina showed the presence of mostly octahedral Al3+ ions, but the other two samples displayed even higher number of tetrahedral Al3+ ions than the initial ?-Al2O3. Morphological changes were also confirmed by TEM. All these results consistently suggest the morphology-dependent phase transformations of ?-Al2O3 and the improved thermal stability of platelet- and rod- shaped ?-Al2O3 in comparison to a commercial ?-Al2O3. J.Sz. acknowledges the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences & Biosciences for the support of this work.

Lee, Jaekyoung↗

PHOTODESORPTION OF SOLID CO{sub 2} BY LY{alpha}

We measured desorption of atoms and molecules from films of solid carbon dioxide in an ultrahigh vacuum from 6 to 60 K under irradiation with Ly{alpha} (121.6 nm, 10.2 eV) photons, an important process in the balance between gas phase and condensed molecules in the interstellar medium. The measurements use microgravimetry and mass spectrometry during irradiation and temperature programmed desorption after irradiation. At low photon fluences, the desorption flux consists mainly of O atoms and, after {approx}10{sup 17} photons cm{sup -2}, it is dominated by CO with smaller amount of O{sub 2}, C, and CO{sub 2}, with the presence of O{sub 2} indicating solid-state chemical reactions. At high fluences (up to 10{sup 18} photons cm{sup -2}){sub ,} the desorption yields saturate at values much higher than in previous studies. The yields (molecules/photon), derived assuming stoichiometric desorption, reach 0.014 at 6 K, growing to {approx}0.2 at 50 and 60 K. Warming the films during irradiation gives rise to pressure spikes that suggest desorption of trapped species in pores or at defects, possibly assisted by radical-induced reactions. Such an effect could be significant for radiation-processed CO{sub 2}-coated interstellar grains that are heated by, i.e., cosmic ray impacts or grain-grain collisions. We discuss the experiments considering photochemical mechanisms and compare them to the results of ion irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the modes of NO adsorption in Pd/H-CHA

This study investigates NO adsorption on Pd-exchanged chabazite (Pd/H-CHA), a promising passive NO x adsorber (PNA) for capturing cold-start NO x emissions of gasoline- and diesel-powered vehicles. Here, temperature-programed desorption (TPD) and IR spectroscopy are combined with theoretical calculations to elucidate how and where NO is stored, and how water and O 2 affect this process. NO adsorption on Pd/H-CHA produces two TPD features, around 423 and 753 K, and IR bands centered at 1860 and 1810 cm –1 . Calculated NO stretching frequencies and maximum-desorption temperatures reveal that Pd 2+ and Pd + sites are responsible for these low- and high-temperature features, respectively, and that while the IR feature at 1810 cm –1 is due to NO adsorption on Pd + , the 1860 cm –1 feature contains contributions from both weakly-bound NO on Pd 2+ and more strongly bound NO on Pd + , consistent with experimentally observed effects of water and O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Setup to Investigate Hydrogen Isotope Retention on Powder Samples as Slag/Dust Proxies for Advanced Fusion Reactors

Slag/dust formation is one of the critical issues regarding tritium retention in advanced fusion reactors. We upgraded an ultrahigh vacuum device, the sample exposure station (SES), to perform temperature-programmed desorption (TPD), also known as thermal desorption spectroscopy, to investigate deuterium (D) retention in powder samples that are utilized as proxies for slag/dust particles formed in fusion reactors. TPD analysis, calibrated for the desorption rate, was successfully performed on commercially available crystalline/amorphous boron (B) powder after D 2 neutral gas or D + ion exposure. We calibrated the B powder temperature measurement for TPD analysis utilizing a D 2 desorption peak from B-D bonding known for its desorption temperature ~700 K. We introduce a separation procedure of observed D TPD signals, convoluted for corresponding D retention pathways, that was necessary for TPD analysis. This is the first report on the retention of D 2 neutral gas to B, and this observation was enabled by utilizing the B powder sample, which has a larger surface area than films commonly used in laboratory experiments. In conclusion, the upgraded SES system will enable us to investigate hydrogen isotope behaviors for powder/dust samples of various elemental compositions, including metals.

Plasma-facing component debris↗

Reactivity of a Thick BaO Film Supported on Pt(111): Adsorption and Reaction of NO2, H2O and CO2

Reactions of NO2, H2O, and CO2 with a thick (> 20 MLE) BaO film supported on Pt(111) were studied with temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). NO2 reacts with a thick BaO to form surface nitrite-nitrate ion pairs at 300 K, while only nitrates form at 600 K. In the thermal decomposition process of nitrite–nitrate ion pairs, first nitrites decompose and desorb as NO. Then nitrates decompose in two steps : at lower temperature with the release of NO2 and at higher temperature, nitrates dissociate to NO + O2. The thick BaO layer converts completely to Ba(OH)2 following the adsorption of H2O at 300 K. Dehydration/dehydroxylation of this hydroxide layer can be fully achieved by annealing to 550 K. CO2 also reacts with BaO to form BaCO3 that completely decomposes to regenerate BaO upon annealing to 825 K. However, the thick BaO film cannot be converted completely to Ba(NOx)2 or BaCO3 under the experimental conditions employed in this study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal chemistry of copper(I)-N,N '-di-sec-butylacetamidinate on Cu(110) single-crystal surfaces

The surface chemistry of copper(I)-N,N'-di-sec-butylacetamidinate on Cu(110) single-crystal surfaces has been characterized under ultrahigh vacuum by temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy. A series of thermal stepwise conversions were identified, starting with the partial dissociative adsorption of the copper acetamidinate dimers into a mixture of monomers and dimers on the surface. An early dissociation of a C-N bond leads to the production of N-sec-butylacetamidine, which is detected in TPD experiments in three temperature regimes, the last one centered around 480 K. Butene, and a small amount of butane, is also detected above approximately 500 K, and hydrogen production, an indication of dehydrogenation of surface fragments, is observed at 460, 550 and 670 K. In total, only about 10% of the initial copper(I)-N,N'-di-sec-butylacetamidinate adsorbed monolayer decomposes, and only about {approx}3% of carbon is left behind on the surface after heating to high temperatures. The implications of this surface chemistry to the design of chemical film growth processes using copper acetamidinates as precursors are discussed.

36 MATERIALS SCIENCE↗