Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal circulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Interhemispheric comparison of atmospheric circulation features as evaluated from Nimbus satellite data

General circulation parameters in the Northern Hemisphere are calculated using atmospheric thermal structure obtained from Nimbus 3 SIRS multi-channel radiance information. The thermal structure up to 10 mb is obtained by using a regression technique with thickness between pressure levels as the dependent variable. General circulation parameters calculated on a daily basis include zonal and eddy available potential energy, and zonal and eddy kinetic energy. A second set of calculations is performed using National Meteorological Center grid data. A comparison of the two sets of calculations indicates that, although the energies calculated from the SIRS-derived structure underestimate the actual energies, maxima, minima, and trends are well identified. An example of mid-stratospheric energy changes during a breakdown of the polar-night vortex is also given.

Reiter, E. R.↗
DOE OSTI2022

Advantages of a variable‐resolution global climate model in reproducing the seasonal evolution of East Asian summer monsoon

Abstract The East Asian summer monsoon (EASM) is unique among monsoon systems that it features meridional evolution of the summer monsoon. In this study, we evaluate the performances of a Variable‐Resolution Community Earth System Model (VR‐CESM) regionally refined over eastern China (14 km) in reproducing the seasonal evolution of EASM precipitation over China. Compared with reference datasets, VR‐CESM shows better performance than the corresponding globally uniform coarse‐resolution model CESM (quasi‐uniform 1°), especially over western China where complex local topography exists. The northward monsoon migration is closely related to low‐level southerly flows and vertical moisture advection, which are more reasonably simulated in VR‐CESM. The four critical timings of the EASM (monsoon onset, withdrawal, peak, and duration) are also better captured in VR‐CESM than in CESM. The corresponding spatial Pearson correlation coefficients of the four critical timings with respect to reference datasets are about 0.1 higher in VR‐CESM than those in CESM. Both models are most accurate in simulating monsoon onset and least accurate at simulating the monsoon peak. The overestimated zonal thermal contrast in CESM is responsible for the earlier monsoon onset and excessive precipitation in September over the Yangtze River valley. Finer resolution in VR‐CESM, especially over the Tibetan Plateau (TP), appears to be a main factor in simulating better zonal thermal contrast and seasonal evolution of the EASM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Large Eddy Simulations of the Atmospheric Boundary Layer Over Satellite‐Sensed Sea Ice Maps

Surface heterogeneity in the marginal ice zone (MIZ) causes multiscale secondary atmospheric circulations that are challenging to model or observe. The absence or inadequate representation of these circulations in ocean‐atmosphere exchange schemes in climate models is partially responsible for the underestimation of Arctic sea ice loss. Observationally, such circulations obfuscate the interpretation of polar atmospheric chemistry measurements, among others. To address this open challenge, large‐eddy simulations are conducted over real‐world satellite‐sensed sea ice maps with an ice‐sea temperature contrast, as well as over idealizations of these maps that alter the ice pattern but conserve its fraction, showing that the ice fraction of a surface is not sufficient to predict the surface heat flux. In a second suite of simulations, three other heterogeneity metrics (representing the surface fragmentation, patch edge tortuosity, and patch size variability) are introduced to complement the ice fraction in describing the surface. Simulations varying these parameters suggest that they also significantly impact surface‐air interactions. A roughness contrast is then added to the surface temperature contrast, indicating that the contribution of roughness changes to the resulting atmospheric circulations is less pronounced than that of thermal heterogeneity. Based on these results, we illustrate, using a multi‐linear regression on these map features, that MIZ surface parameterizations in Earth Systems Models can be improved if they account for these various characteristics of the sea‐ice patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Conceptual design of a replacement 2.1 K cold box for the Spallation Neutron Source Central Helium Liquefier

Abstract After more than 20 years of operation, the cold compressor technology in use at the Spallation Neutron Source (SNS) is obsolete, and replacement parts and service are no longer available. SNS has partnered with Jefferson Lab to design and construct a replacement sub-atmospheric cold box outfitted with modern cold compressor technology. The general design follows from Jefferson Lab’s experience on other recent sub-atmospheric cold box projects. Design decisions are backed by thorough engineering analysis to ensure technical requirements are met in a cost-effective manner. Conceptual design of the replacement cold box has been completed, and will be summarized in this paper. It features five cold compressors with an operating flow range of 80-140 g/s, and includes piping and valving to support cold compressor maintenance without interrupting flow circulation to the load. The approach to thermal shielding, insulation, and integration of the upgraded cold compressor hardware into the existing SNS control system will also be addressed.

Mastracci, B [Thomas Jefferson National Accelerato↗
NASA NTRS1980

Some diurnal properties of clouds over the Martian volcanoes

The diurnal properties of cloud systems over Martian volcanoes observed by the Viking Orbiter spacecraft are discussed. Photographic sequences of diurnal cloud development are presented for clouds in the vicinity of Elysium Mons and Ascraeus Mons, and the rapid growth of cloudiness starting at 11.23 LT is noted. The low-lying fogs and convective afternoon clouds observed are characterized as water ice clouds, while the cirrus-type clouds may be composed of CO2. The diurnal development of the clouds is then explained in terms of local atmospheric stability and circulation as influenced by surface topography and thermal properties. Consideration is also given to possible reasons for the pronounced seasonal variations in cloudiness.

Hunt, G. E.↗
NASA NTRS1990

Stratiform clouds and their interaction with atmospheric motion

During 1989 and 1990, the researchers saw the publication of two papers and the submission of a third for review on work supported primarily by the previous contract, NAS8-36150; the delivery of an invited talk at the SIAM Conference on Dynamical Systems in Orlando, Florida; and the start of two new projects on the radiative effects of stratocumulus on the large-scale flow. The published papers discuss aspects of stratocumulus circulations (Laufersweiler and Shirer, 1989) and the Hadley to Rossby regime transition in rotating spherical systems (Higgins and Shirer, 1990). The submitted paper (Haack and Shirer, 1990) discusses a new nonlinear model of roll circulations that are forced both dynamically and thermally. The invited paper by H. N. Shirer and R. Wells presented an objective means for determining appropriate truncation levels for low-order models of flows involving two incommensurate periods; this work has application to the Hadley to Rossby transition problem in quasi-geostrophic flows (Moroz and Holmes, 1984). The new projects involve the development of a multi-layered quasi-geostrophic channel model for study of the modulation of the large-scale flow by stratocumulus clouds that typically develop off the coasts of continents. In this model the diabatic forcing in the lowest layer will change in response to the (parameterized) development of extensive fields of stratocumulus clouds. To guide creation of this parameterization scheme, researchers are producing climatologies of stratocumulus frequency and the authors correlate these frequencies with the phasing and amplitude of the large-scale flow pattern. Researchers discuss the above topics in greater detail.

Clark, John H. E.↗
NASA NTRS1993

Fabricating niobium test loops for the SP-100 space reactor

This article describes the successful fabrication, operation, and evaluation of a series of niobium-alloy (Nb-1 Zr and PWC-11) thermal convection loops designed to contain and circulate molten lithium at 1,350 K. These loops were used to establish the fabrication variables of significance for a nuclear power supply for space. Approximately 200 weldments were evaluated for their tendency to be attacked by lithium as a function of varying atmospheric contamination. No attack occurred for any weldment free of contamination, with or without heat treatment, and no welds accidentally deviated from purity. The threshold oxygen content for weldment attack was determined to be 170-200 ppm. Attack varied directly with weldment oxygen and nitrogen contents.

Bryhan, Anthony J.↗
NASA NTRS1991

Blood Volume: Its Adaptation to Endurance Training

Expansion of blood volume (hypervolemia) has been well documented in both cross-sectional and longitudinal studies as a consequence of endurance exercise training. Plasma volume expansion can account for nearly all of the exercise-induced hypervolemia up to 2-4 wk; after this time expansion may be distributed equally between plasma and red cell volumes. The exercise stimulus for hypervolemia has both thermal and nonthermal components that increase total circulating plasma levels of electrolytes and proteins. Although protein and fluid shifts from the extravascular to intravascular space may provide a mechanism for rapid hypervolemia immediately after exercise, evidence supports the notion that chronic hypervolemia associated with exercise training represents a net expansion of total body water and solutes. This net increase of body fluids with exercise training is associated with increased water intake and decreased urine volume output. The mechanism of reduced urine output appears to be increased renal tubular reabsorption of sodium through a more sensitive aldosterone action in man. Exercise training-induced hypervolemia appears to be universal among most animal species, although the mechanisms may be quite different. The hypervolemia may provide advantages of greater body fluid for heat dissipation and thermoregulatory stability as well as larger vascular volume and filling pressure for greater cardiac stroke volume and lower heart rates during exercise.

Convertino, Victor A.↗
NASA NTRS1999

Coupling Processes Between Atmospheric Chemistry and Climate

This is the final report. The overall objective of this project is to improve the understanding of coupling processes among atmospheric chemistry, aerosol and climate, all important for quantitative assessments of global change. Among our priority are changes in ozone and stratospheric sulfate aerosol, with emphasis on how ozone in the lower stratosphere would respond to natural or anthropogenic changes. The work emphasizes two important aspects: (1) AER's continued participation in preparation of, and providing scientific input for, various scientific reports connected with assessment of stratospheric ozone and climate. These include participation in various model intercomparison exercises as well as preparation of national and international reports. and (2) Continued development of the AER three-wave interactive model to address how the transport circulation will change as ozone and the thermal properties of the atmosphere change, and assess how these new findings will affect our confidence in the ozone assessment results.

Ko, Malcolm K. W.↗
NASA NTRS1999

Coupling Processes Between Atmospheric Chemistry and Climate

This is the final report for NAS5-97039 for work performed between December 1996 and November 1999. The overall objective of this project is to improve the understanding of coupling processes among atmospheric chemistry, aerosol and climate, all important for quantitative assessments of global change. Among our priority are changes in ozone and stratospheric sulfate aerosol, with emphasis on how ozone in the lower stratosphere would respond to natural or anthropogenic changes. The work emphasizes two important aspects: (1) AER's continued participation in preparation of, and providing scientific input for, various scientific reports connected with assessment of stratospheric ozone and climate. These include participation in various model intercomparison exercises as well as preparation of national and international reports. (2) Continued development of the AER three-wave interactive model to address how the transport circulation will change as ozone and the thermal properties of the atmosphere change, and assess how these new findings will affect our confidence in the ozone assessment results.

Ko, Malcolm↗
NASA NTRS2007

Biomedical Support of U.S. Extravehicular Activity

The world's first extravehicular activity (EVA) was performed by A. A. Leonov on March 18, 1965 during the Russian Voskhod-2 mission. The first US EVA was executed by Gemini IV astronaut Ed White on June 3, 1965, with an umbilical tether that included communications and an oxygen supply. A hand-held maneuvering unit (HHMU) also was used to test maneuverability during the brief EVA; however the somewhat stiff umbilical limited controlled movement. That constraint, plus difficulty returning through the vehicle hatch, highlighted the need for increased thermal control and improved EVA ergonomics. Clearly, requirements for a useful EVA were interrelated with the vehicle design. The early Gemini EVAs generated requirements for suits providing micro-meteor protection, adequate visual field and eye protection from solar visual and infrared radiation, gloves optimized for dexterity while pressurized, and thermal systems capable of protecting the astronaut while rejecting metabolic heat during high workloads. Subsequent Gemini EVAs built upon this early experience and included development of a portable environmental control and life support systems (ECLSS) and an astronaut maneuvering unit. The ECLSS provided a pressure vessel and controller with functional control over suit pressure, oxygen flow, carbon dioxide removal, humidity, and temperature control. Gemini EVA experience also identified the usefulness of underwater neutral buoyancy and altitude chamber task training, and the importance of developing reliable task timelines. Improved thermal management and carbon dioxide control also were required for high workload tasks. With the Apollo project, EVA activity was primarily on the lunar surface; and suit durability, integrated liquid cooling garments, and low suit operating pressures (3.75 pounds per square inch absolute [psia] or 25.8 kilopascal [kPa],) were required to facilitate longer EVAs with ambulation and significant physical workloads with average metabolic rates of 1000 BTU/hr and peaks of up to 2200 BTU/hr. Mobility was further augmented with the Lunar Roving Vehicle. The Apollo extravehicular mobility unit (EMU) was made up of over 15 components, ranging from a biomedical belt for capturing and transmitting biomedical data, urine and fecal containment systems, a liquid cooling garment, communications cap, a modular portable life support system (PLSS), a boot system, thermal overgloves, and a bubble helmet with eye protection. Apollo lunar astronauts performed successful EVAs on the lunar surface from a 5 psia (34.4 kPa) 100% oxygen environment in the Lunar Lander. A maximum of three EVAs were performed on any mission. For Skylab a modified A7LB suit, used for Apollo 15, was selected. The Skylab astronaut life support assembly (ALSA) provided umbilical support through the life support umbilical (LSU) and used open loop oxygen flow, rather than closed-loop as in Apollo missions. Thermal control was provided by liquid water circulated by spacecraft pumps and electrical power also was provided from the spacecraft via the umbilical. The cabin atmosphere of 5 psia (34.4 kPa), 70% oxygen, provided a normoxic atmosphere and because of the very low nitrogen partial pressures, no special protocols were required to protect against decompression sickness (DCS) as was the case with the Apollo spacecraft with a 5 psi, 100% oxygen environment.

Gernhardt, Michael L.↗
NASA NTRS2016

Two-Step Multi-Physics Analysis of an Annular Linear Induction Pump for Fission Power Systems

One of the key technologies associated with fission power systems (FPS) is the annular linear induction pump (ALIP). ALIPs are used to circulate liquid-metal fluid for transporting thermal energy from the nuclear reactor to the power conversion device. ALIPs designed and built to date for FPS project applications have not performed up to expectations. A unique, two-step approach was taken toward the multi-physics examination of an ALIP using ANSYS Maxwell 3D and Fluent. This multi-physics approach was developed so that engineers could investigate design variations that might improve pump performance. Of interest was to determine if simple geometric modifications could be made to the ALIP components with the goal of increasing the Lorentz forces acting on the liquid-metal fluid, which in turn would increase pumping capacity. The multi-physics model first calculates the Lorentz forces acting on the liquid metal fluid in the ALIP annulus. These forces are then used in a computational fluid dynamics simulation as (a) internal boundary conditions and (b) source functions in the momentum equations within the Navier-Stokes equations. The end result of the two-step analysis is a predicted pump pressure rise that can be compared with experimental data.

Fission Power Systems↗
NASA NTRS2016

Two-Step Multi-Physics Analysis of an Annular Linear Induction Pump for Fission Power Systems

One of the key technologies associated with fission power systems (FPS) is the annular linear induction pump (ALIP). ALIPs are used to circulate liquid-metal fluid for transporting thermal energy from the nuclear reactor to the power conversion device. ALIPs designed and built to date for FPS project applications have not performed up to expectations. A unique, two-step approach was taken toward the multi-physics examination of an ALIP using ANSYS Maxwell 3D and Fluent. This multi-physics approach was developed so that engineers could investigate design variations that might improve pump performance. Of interest was to determine if simple geometric modifications could be made to the ALIP components with the goal of increasing the Lorentz forces acting on the liquid-metal fluid, which in turn would increase pumping capacity. The multi-physics model first calculates the Lorentz forces acting on the liquid metal fluid in the ALIP annulus. These forces are then used in a computational fluid dynamics simulation as (a) internal boundary conditions and (b) source functions in the momentum equations within the Navier-Stokes equations. The end result of the two-step analysis is a predicted pump pressure rise that can be compared with experimental data.

Fission Power Systems↗
NASA NTRS1986

General circulation model simulations of superrotation in slowly rotating atmospheres - Implications for Venus

The results of three-dimensional general circulation model experiments simulating the earth atmosphere with planetary rotation rates between 1 and 1/64th times the earth's and diurnally averaged thermal forcing are used to evaluate Venus atmospheric superrotation theories invoking the upward transport of angular momentum from the solid planet by the zonal mean circulation. While the theories predict that superrotation is a common feature of slowly rotating planetary atmospheres, suggesting that superrotation should appear in the present, slowly rotating cases, the steady state circulations are noted to include only weak globally averaged superrotation, consistent with previously reported results from lower resolution models. The thermally driven equator-to-pole circulation rapidly generates zonal mean winds during spinup, near the planetary surface, precluding vertical angular momentum transport and suppressing further superrotation development.

Covey, C.↗
DOE OSTI2024

Experimental Operation of a Prototype 750C Advanced Chloride Molten Salt Bellows Valve

To achieve DOE 2030 SunShot targets that reduce the cost of liquid-based solar by an additional 40% to 70% beyond 2018 costs, a more reliable, highly manufacturable flow valve, capable of achieving operational temperatures of >700°C is required [1]. This paper investigates the development of an innovative high-temperature chloride molten salt valve, with operation up to 750°C. This valve is intended to be employed within Gen 3 CSP liquid-based thermal energy storage (TES) systems as well as Gen 4 modular salt reactor (MSR) technologies. This work details the general design and flow testing of a bellows-seal flow control valve (FCV). This design includes an integrated closed-loop thermal control system to ensure robust design for freeze-thaw cycles. The self-contained thermal management STM system, is unique in the salt valve industry since it is an integrated solution to provide a consistent, repeatable alternative to typical heat tracing. Additionally, the design includes the employment of a novel heat pipe valve stem to facilitate enhanced passive thermal management into the valve assembly. This valve stem heat pipe is designed to facilitate natural circulation within the bonnet to ensure robust operation, during both nominal and transient thermal operation. The valve body and trim will be designed using SS316H, consistent with Flowserve Corporation’s existing product base and is code qualified but will utilize clad material for materials corrosion, manufacturing cost reduction and compatibility to ensure design flexibility. A test campaign was performed in this investigation utilizing a novel 750°C ternary chloride (20%NaCl/40%MgCl2/40%KCl by mol. wt. %) molten salt flow loop. A discussion about the design and installation of the valves within this test bed is provided for this investigation. Valve test results from this study assessed Cv curves as well as multiple actuator cycles, under varying thermodynamic and operational mode conditions, which would be characteristic within a commercial molten salt facility. The results indicate nominal operation for the baseline design, though improved performance and reliability is expected with the full designed FCV.

Armijo, Kenneth (ORCID:0000000346832147)↗
DOE OSTI2023

What Controls the Entrainment Rate of Dry Buoyant Thermals with Varying Initial Aspect Ratio?

Here, this study uses theory and numerical simulations to analyze the nondimensional spreading rate a (change in radius with height) of buoyant thermals as they rise and entrain surrounding environmental fluid. A focus is on how a varies with initial thermal aspect ratio A r , defined as height divided by width of the initial buoyancy perturbation. An analytic equation for thermal ascent rate w t that depends on a is derived from the thermal-volume-averaged momentum bud get equation. The thermal top height when w t is maximum, defining a critical height z c , is inversely proportional to a. The height z c also corresponds to the thermal top height when buoyant fluid along the thermal’s vertical axis is fully replaced by entrained nonbuoyant environmental fluid rising from below the thermal. The time scale for this process is controlled by the vertical velocity of parcels rising upward through the thermal’s core. This parcel vertical velocity is approximated from Hill’s analytic spherical vortex, yielding an analytic inverse relation between a and A r . Physically, this a–A r relation is connected to changes in circulation as A r is modified. Numerical simulations of thermals with A r varied from 0.5 to 2 give a values close to the analytic theoretical relation, with a factor of ~3 decrease in a as A r is increased from 0.5 to 2. The theory also explains why a of initially spherical thermals from past laboratory and modeling studies is about 0.15. Overall, this study provides a theoretical underpinning for understanding the entrainment behavior of thermals, relevant to buoyantly driven atmospheric flows.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1987

Development of a two-dimensional zonally averaged statistical-dynamical model. II - The role of eddy momentum fluxes in the general circulation and their parameterization

The role of eddy momentum fluxes in the general circulation was investigated using a two-dimensional zonally averaged statistical-dynamical model described by Yao and Stone (1987), which is almost two orders of magnitude faster than the three-dimensional climate model of Hansen et al. (1983). Results show that the vertical structure of the meridional eddy flux has relatively little impact on the general circulation, presumably because the vertical structure is strongly constrained by the thermal wind relation and surface friction. On the other hand, it was found that, in order to simulate accurately the general circulation and its response to climate changes, parameterization of the vertically integrated meridional eddy flux of angular momentum is necessary. A new parameterization of this eddy momentum transport was carried out, which is intended to represent the transport due to large-scale transient eddies arising from baroclinic instability.

Stone, Peter H.↗