Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal dissipation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Thermal Performance of the Mars Science Laboratory Rover During Mars Surface Operations

On November 26, 2011, NASA launched a large (900 kg) rover as part of the Mars Science Laboratory (MSL) mission to Mars. Eight months later, on August 5, 2012, the MSL rover (Curiosity) successfully touched down on the surface of Mars. As of the writing of this paper, the rover had completed over 200 Sols of Mars surface operations in the Gale Crater landing site (4.5 deg S latitude). This paper describes the thermal performance of the MSL Rover during the early part of its two Earth-0.year (670 Sols) prime surface mission. Curiosity landed in Gale Crater during early Spring (Ls=151) in the Southern Hemisphere of Mars. This paper discusses the thermal performance of the rover from landing day (Sol 0) through Summer Solstice (Sol 197) and out to Sol 204. The rover surface thermal design performance was very close to pre-landing predictions. The very successful thermal design allowed a high level of operational power dissipation immediately after landing without overheating and required a minimal amount of survival heating. Early morning operations of cameras and actuators were aided by successful heating activities. MSL rover surface operations thermal experiences are discussed in this paper. Conclusions about the rover surface operations thermal performance are also presented.

thermal design↗
NASA NTRS1968

High conductance vapor thermal switch

High conductance vapor thermal switch was produced to maintain heat dissipating component temperatures within acceptable limits. The switch is a self-actuating, automatic device that regulates the rate of heat flow to control.

Hyman, N. L.↗
NASA NTRS1974

Linear viscous stability analysis of the stratified Bickley jet

The stability of the stably stratified Bickley jet to small disturbances in a viscous, heat conducting fluid is explored by numerical integration of the governing differential equation. Curves of neutral stability are presented in the alpha-R plane and the parametric dependence of these curves upon Richardson number and Prandtl number is examined. The results show a curious bimodal behavior of the curve of neutral stability for small Richardson numbers. In addition, closed neutral curves are found for Richardson numbers in excess of the critical value for the inviscid flow. The unstable regions in the interior of these curves increase with decreasing Prandtl number. Energy balances are computed which show the relative magnitude of the Reynolds stress production, buoyancy dissipation, and viscous dissipation terms across the flow. As the thermal diffusivity becomes large compared with the kinematic viscosity, the buoyancy term is suppressed and the thermal stratification becomes irrelevant.

Gage, K. S.↗
NASA NTRS1978

Computer modeling of dendritic web growth processes and characterization of the material

High area throughput rate will be required for the economical production of silicon dendritic web for solar cells. Web width depends largely on the temperature distribution on the melt surface while growth speed is controlled by the dissipation of the latent heat of fusion. Thermal models were developed to investigate each of these aspects, and were used to engineer the design of laboratory equipment capable of producing crystals over 4 cm wide; growth speeds up to 10 cm/min were achieved. The web crystals were characterized by resistivity, lifetime and etch pit density data as well as by detailed solar cell I-V data. Solar cells ranged in efficiency from about 10 to 14.5% (AM-1) depending on growth conditions. Cells with lower efficiency displayed lowered bulk lifetime believed to be due to surface contamination.

Seidensticker, R. G.↗
NASA NTRS1986

The effect of beam-driven return current instability on solar hard X-ray bursts

The problem of electrostatic wave generation by a return current driven by a small area electron beam during solar hard X-ray bursts is discussed. The marginal stability method is used to solve numerically the electron and ion heating equations for a prescribed beam current evolution. When ion-acoustic waves are considered, the method appears satisfactory and, following an initial phase of Coulomb resistivity in which T sub e/T sub i rise, predicts a rapid heating of substantial plasma volumes by anomalous ohmic dissipation. This hot plasma emits so much thermal bremsstrahlung that, contrary to previous expectations, the unstable beam-plasma system actually emits more hard X-rays than does the beam in the purely collisional thick target regime relevant to larger injection areas. Inclusion of ion-cyclotron waves results in ion-acoustic wave onset at lower T sub e/T sub i and a marginal stability treatment yields unphysical results.

Cromwell, D.↗
NASA NTRS1987

Transverse deflection and dissipation of small plasma beams and clouds in magnetized media

Propagation of a quasi-neutral plasma beam or cloud across a magnetic field is considered for the case where the transverse dimension of the beam or cloud is sufficiently small compared to ion gyroradii. This situation commonly arises for active experiments in near-earth space. Two mechanisms are presented for transverse deflection of a beam or cloud in the -v0 x B0 direction where v0 is the velocity relative to the ambient medium. In the first, asymmetric escape of ions from an electrically polarized beam or cloud causes transverse deflection by means of a rocket effect. The transverse deflection distance is estimated to be a few times the initial transverse dimension of the beam or cloud. Dissipation occurs within a few times the thermal ion transverse crossing time. In the second mechanism, asymmetric charging results from localized accumulation of incident ions from the ambient medium. This excess positive charge distorts electric equipotentials and drives electron Hall currents that maintain an asymmetric compressed magnetic field region. The asymmetry of the magnetic stress contributes to transverse deflection with the same sign as the rocket effect. The asymmetric magnetic field also focuses incident ions to yield the localized charge accumulation. These ideas are qualitatively consistent with observations of the Active Magnetospheric Particle Tracer Explorers artificial comet releases.

Cheng, Andrew F.↗
NASA NTRS1989

Enabling technologies research and development structures

The technology-development areas of most critical importance to the definition of the NASP vehicle's airframe and integrated propulsion systems are discussed with a view to the progress made to date and the prospects for the expansion of a definitive NASP design data base on materials, structures, etc. It is necessary to achieve a very low structural-mass fraction, to withstand 6000 F radiation equilibrium fuselage nosecap temperatures, to manage an extensive active cooling network for both airframe and propulsion system capable of dissipating 10,000 BTU/sq ft-sec thermal fluxes, to maintain effective hot-gas sealing, and to manufacture high temperature effectiveness-retaining control surfaces. An account is given of successes thus far achieved.

Davis, John G., Jr.↗
NASA NTRS1991

Performances of 250 Amp-hr lithium/thionyl chloride cells

A 250 Ah lithium thionyl chloride battery is being developed for a booster rocket engine. Extensive cell testing is running to evaluate functional and safety performances. Some results are presented. The lithium/thionyl chloride batteries were selected for their high energy density (low weight) as compared to other sources. The temperature of a lower weight item will be more sensitive to variations of internal and external heat fluxes than a heavier one. The use of high energy density L/TC batteries is subjected to stringent thermal environments to have benefit of energy density and to stay safe in any conditions. The battery thermal environment and discharge rate have to be adjusted to obtain the right temperature range at cell level, to have the maximum performances. Voltage and capacity are very sensitive to temperature. This temperature is the cell internal actual temperature during discharge. This temperature is directed by external thermal environment and by cell internal heat dissipation, i.e., cell actual voltage.

Goualard, Jacques↗
NASA NTRS1990

Turbulent transport in the solar nebula

This paper describes the current state of an ongoing project to simulate turbulent flow in a solar nebula, which is the flattened disk of dust and gas out of which a solar system forms. The goal of this project is to determine a model for the transport of mass and angular momentum in the nebula. The nebula flow exhibits compressibility, thermal conduction, viscosity, internal heating through viscous dissipation, a stable shear due to Keplerian rotation, and a gravitational acceleration in the vertical direction which is linear with altitude. These properties combine to give flow patterns not seen in terrestrial applications. Primordial solar systems are known to exist and are presumably undergoing an evolution similar to the early stages of our own solar system; for example, the IRAS infrared telescope has discovered such a protoplanetary system around the star Vega. Solar nebula evolution is the subject of much research in the astrophysical community. In the long run, researchers hope to gain a better understanding of planetary formation and the processes which dissipate the solar nebula with time.

Thompson, K. W.↗
NASA NTRS2000

Effective utilization of quantum-cascade distributed-feedback lasers in absorption spectroscopy

A variable duty cycle quasi-cw frequency scanning technique was applied to reduce thermal effects resulting from the high heat dissipation of type I quantum-cascade lasers. This technique was combined with a 100-m path-length multipass cell and a zero-air background-subtraction technique to enhance detection sensitivity to a parts-in-10(9) (ppb) concentration level for spectroscopic trace-gas detection of CH4, N2O, H2O, and C2H5OH in ambient air at 7.9 micrometers. A new technique for analysis of dense high resolution absorption spectra was applied to detection of ethanol in ambient air, yielding a 125-ppb detection limit.

NASA Discipline Environmental Health↗
NASA NTRS2011

Radiolytic Cryovolcanism Revisited

Location of Enceladus within the inner magnetosphere of Saturn makes it likely that energetic electron irradiation, ion-neutral chemistry of the emergent cryovolcanic plume gas, and resultant radiolytic modification of surface ice composition could impact long-term evolution of molecular composition in the global ice crust. Thermally-driven convection of ice in the south polar terrain would bring radiolytic oxidant products into contact with subsurface reservoirs of primordial organics on million-year time scales. The chemical reactions leading to CO2 gas production as a primary gas-piston driver of cryovolcanic activity would be exponentially elevated in the warm-ice margins of a heated fluid. The fluid temperature is typically assumed to be below 273 K but could be much higher in a gas-pressurized deep subsurface environment. The Perrier Ocean model has demonstrated how a CO2-loaded fluid could account for the observed jets, while the heat content of the fluid arising from the moon's deeper interior could support high levels of chemical reactivity in the thermal margins. Since mass loss and tidal dissipation arguments do not support continuous activity over billions of years, the activity is likely very episodic so that even low-level energy sources including irradiation-driven radiolysis of surface ices could substantially contribute to the chemical dynamics of the activity apparently now in high phase. A multi-phase thermochemical model, and supporting laboratory measurements of temperature-dependent reaction rates, are needed to investigate these potentially complex processes.

Cooper, John F.↗
NASA NTRS2016

System Assessment of a High Power 3-U CubeSat

The Advanced eLectrical Bus (ALBus) CubeSat project is a technology demonstration mission of a 3-UCubeSat with an advanced, digitally controlled electrical power system capability and novel use of Shape Memory Alloy (SMA) technology for reliable deployable solar array mechanisms. The objective of the project is to, through an on orbit demonstration, advance the state of power management and distribution (PMAD) capabilities to enable future missions requiring higher power, flexible and reliable power systems. The goals of the mission include demonstration of: 100 Watt distribution to a target electrical load, efficient battery charging in the orbital environment, flexible power system distribution interfaces, adaptation of power system control on orbit, and reliable deployment of solar arrays and antennas utilizing re-settable SMA mechanisms. The power distribution function of the ALBus PMAD system is unique in the total power to target load capability of 100 W, the flexibility to support centralized or point-to-load regulation and ability to respond to fast transient power requirements. Power will be distributed from batteries at 14.8 V, 6.5 A to provide 100 W of power directly to a load. The deployable solar arrays utilize NASA Glenn Research Center superelastic and activated Nitinol(Nickel-Titanium alloy) Shape Memory Alloy (SMA) technology for hinges and a retention and release mechanism. The deployable solar array hinge design features utilization of the SMA material properties for dual purpose. The hinge uses the shape memory properties of the SMA to provide the spring force to deploy the arrays. The electrical conductivity properties of the SMA also enables the design to provide clean conduits for power transfer from the deployable arrays to the power management system. This eliminates the need for electrical harnesses between the arrays and the PMAD system in the ALBus system design. The uniqueness of the SMA retention and release mechanism design is the ability to reset the mechanism, allowing functional tests of the mechanisms prior to flight with no degradation of performance. The project is currently in preparation at the NASA Glenn Research Center for a launch in late calendar year of 2017. The 100 Watt power distribution and dual purpose, re-settable SMA mechanisms introduced several system level challenges due to the physical constraints in volume, mass and surface area of 3-U CubeSats. Several trade studies and design cycles have been completed to develop a system which supports the project objectives. This paper is a report on the results of the system level trade studies and assessments. The results include assessment of options for thermal control of 100 Watts of power dissipation, data from system analyses and engineering development tests, limitations of the 3-U system and extensibility to larger scale CubeSat missions.

CubeSat↗
NASA NTRS1972

The diurnal heat budget of the thermosphere

Detailed numerical calculations of thermospheric heat sources and sinks are presented and their relative importance is discussed in reference to the energy balance phenomena of the neutral atmosphere. It is shown that the thermal energy available from the absorption in the Schumann-Runge continuum leading to photodissociation of O2 is by far the largest energy source in the lower thermosphere. Other sources of varying importance in different altitude ranges are: (1) energy from photoelectrons, (2) energy exchange from thermal plasma, (3) chemical reactions (ion-electron dissociative recombination) energy gain, and (4) kinetic and dissipative energy associated with the neutral wind. The energy sinks of importance are thermal conduction at the lower boundary (120 km) and radiative cooling of atomic oxygen. It is shown that the combined energy from processes 2 to 4 constitute only a small fraction of the total energy available from photoelectrons and are in phase with the latter. It is suggested that a choice of a lower boundary much below 120 km, e.g. near the mesopause level (90 km), should be more appropriate for general thermospheric studies.

Chandra, S.↗
NASA NTRS1991

Magnetized supernova remnants with cosmic rays

The effects of interstellar magnetic fields and cosmic rays on the dynamics of an SNR expanding into a warm H I gas are examined. As long as the shock wave driven by the SN explosion propagates faster than 110 km/s, the vicinity of the shock front is fully ionized, and cosmic rays are well coupled to the thermal fluid. They are first accelerated at the adiabatic front, and further compressed in the postshock cooling zone. When the shock velocity drops below 110 km/s, ion-neutral collisions in the vicinity of the shock dissipate the waves which couple cosmic rays to the thermal gas, and impede cosmic-ray acceleration. It is found that magnetic and cosmic-ray pressures together dominate over thermal pressure away from the magnetic poles. As a result, most of the shell becomes considerably thicker, and the shock wave propagates somewhat faster than in the nonmagnetic case. At late times, the transverse mass motions which take place from the poles to the equator create H I holes at the polar caps. This theory leads to a simple interpretation of the 'barrel-shaped' distribution of radio emission observed in some SNRs.

Ferriere, Katia M.↗
NASA NTRS1990

The test facility requirements for the thermal vacuum thermal balance test of the Cosmic Background Explorer Observatory

The Cosmic Background Explorer Observatory (COBE) underwent a thermal vacuum thermal balance test in the Space Environment Simulator (SES). This was the largest and most complex test ever conducted at this facility. The 4 x 4 m (13 x 13 ft) spacecraft weighed approx. 2223 kg (4900 lbs) for the test. The test set up included simulator panels for the inboard solar array panels, simulator panels for the flight cowlings, Sun and Earth Sensor stimuli, Thermal Radio Frequency Shield heater stimuli and a cryopanel for thermal control in the Attitude Control System Shunt Dissipator area. The fixturing also included a unique 4.3 m (14 ft) diameter Gaseous Helium Cryopanel which provided a 20 K environment for the calibration of one of the spacecraft's instruments, the Differential Microwave Radiometer. This cryogenic panel caused extra contamination concerns and a special method was developed and written into the test procedure to prevent the high buildup of condensibles on the panel which could have led to backstreaming of the thermal vacuum chamber. The test was completed with a high quality simulated space environment provided to the spacecraft. The test requirements, test set up, and special fixturing are described.

Milam, Laura J.↗
NASA NTRS1991

Test facility requirements for the thermal vacuum thermal balance test of the Cosmic Background Explorer Observatory

The Cosmic Background Explorer Observatory (COBE) underwant a thermal vacuum thermal balance test in the Space Environment Simulator (SES). This was the largest and most complex test ever conducted at this facility. The 4 x 4 m (13 x 13 ft) spacecraft weighed approx. 2223 kg (4900 lbs) for the test. The test set up included simulator panels for the inboard solar array panels, simulator panels for the flight cowlings, Sun and Earth Sensor stimuli, Thermal Radio Frequency Shield heater stimuli and a cryopanel for thermal control in the Attitude Control System Shunt Dissipator area. The fixturing also included a unique 4.3 m (14 ft) diameter Gaseous Helium Cryopanel which provided a 20 K environment for the calibration of one of the spacecraft's instruments, the Differential Microwave Radiometer. This cryogenic panel caused extra contamination concerns and a special method was developed and written into the test procedure to prevent the high buildup of condensibles on the panel which could have led to backstreaming of the thermal vacuum chamber. The test was completed with a high quality simulated space environment provided to the spacecraft. The test requirements, test set up, and special fixturing are described.

Milam, Laura J.↗
NASA NTRS1973

The diurnal heat budget of the thermosphere.

Detailed numerical calculations of thermospheric heat sources and sinks are presented and their relative importance is discussed in reference to the energy balance phenomena of the neutral atmosphere. It is shown that the thermal energy available from the absorption in the Schumann-Runge continuum leading to photo-dissociation of O2 is by far the largest energy source in the lower thermosphere. Other sources of varying importance in different altitude ranges are: (1) energy from photoelectrons; (2) energy exchange from thermal plasma; (3) chemical reaction (ion-electron dissociative recombination) energy gain; (4) kinetic and dissipative energy associated with the neutral wind. The energy sinks of importance are (1) thermal conduction at the lower boundary (120 km); and (2) radiative cooling of atomic oxygen. It is shown that the combined energy from processes 2 to 4 constitutes only a small fraction of the total energy available from photoelectrons and is in phase with the latter. These secondary sources (processes 2 to 4), therefore, do not constitute a significant energy source and their contribution can be simply incorporated into photoelectron energy (process 1) by defining an effective photoionization heating efficiency.

Chandra, S.↗
NASA NTRS1994

New techniques for diffusing-wave spectroscopy

We present two new types of measurements that can be made with diffusing-wave spectroscopy (DWS), a form of dynamic light scattering that applies in limit of strong multiple scattering. The first application is to measure the frequency-dependent linear viscoelastic moduli of complex fluids using light scattering. This is accomplished by measuring the mean square displacement of probe particles using DWS. Their response to thermal fluctuations is determined by the fluctuation-dissipation relation, and is controlled by the response of the surrounding complex fluid. This response can be described in terms of a memory function, which is directly related to the complex elastic modulus of the system. Thus by measuring the mean square displacement, we are able to determine the frequency dependent modulus. The second application is the measurement of shape fluctuations of scattering particles. This is achieved by generalizing the theory for DWS to incorporate the effects if amplitude fluctuations in the scattering intensity of the particles. We apply this new method to study the thermally induced fluctuations in the shape of spherical emulsion droplets whose geometry is controlled by surface tension.

Mason, T. G.↗