Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Optical-Gating of Spin-based Quantum States (Final Report)

This project developed a generalizable strategy for optical control of spin-based quantum states through the Photoisomerization-Induced Spin–Charge Excited State (PISCES) process, in which a photochromic spirooxazine ligand bound to an electronically bistable metal complex enables reversible, room-temperature optical switching of spin states in both dilute matrices and the solid state. A multidisciplinary team integrated synthesis, spectroscopy, theory, and surface science to establish design principles for opto-spintronic quantum materials. Systematic structure–property studies across four spirooxazine series revealed that donor–π–acceptor interactions govern thermal isomerization, which proceeds via a rotational pathway. Pulsed EPR measurements demonstrated millisecond-scale coherence times in cobalt-dioxolene-spirooxazine complexes, establishing their promise as optically addressable molecular qubits; the approach was extended to Cu(II), Ni(II), and lanthanide complexes, including optical modulation of zero-field splittings and clock transitions. Two-dimensional IR spectroscopy resolved picosecond ground-state population exchange dynamics, while ab initio calculations elucidated photoisomerization mechanisms and parametrized Hamiltonians for spin relaxation and decoherence. Toward device integration, the team fabricated 2D polymer scaffolds for covalent qubit organization, developed tip-enhanced Raman imaging of molecular monolayers, and demonstrated optical gating of gate voltage in spirooxazine-graphene field-effect transistors. The project produced numerous publications, dissertations, and presentations, and trained over 30 researchers.

2D polymers↗

Totally chlorine-free peracetic acid pulping for nanocellulose isolation from hemp and poplar

Nanocellulose is a promising and sustainable feedstock for developing advanced and functional materials. However, the characteristics of nanocellulose, such as crystallinity, surface energy, and aspect ratio, can vary depending on biomass source and pretreatment methods, leading to variable performance of the nanocellu-lose-based materials. In this study, cellulose nanocrystals (CNCs) were isolated from hemp and poplar using totally chlorine free (TCF) peracetic acid and sodium chlorite delignification and bleaching pretreatments to probe the influences of biomass source and treatment methods on the isolation and characteristics of CNCs. Our results showed that hemp and poplar were almost completely delignified by peracetic acid treatment, whereas sodium chlorite treatment left 5%–6% lignin in the pulp. The yields of CNCs from raw hemp and poplar biomass ranged from 9.8% to 21.9% and 10.9% to 28.3%, respectively, depending on the treatment methods. The dimensions of CNCs from TCF-treated biomass generally maintained a larger width and aspect ratio than those from sodium chlorite-treated biomass. The poplar-derived CNCs exhibited slightly higher crystallinity of 53%–58% than hemp-derived CNCs of 49%–54%. The zeta potential of the CNCs, ranging from -20.1 mV to -31.1 mV, ensured a well-dispersed aqueous solution. The surface energy (dispersive energy of 40–80 mJ/m2 and specific energy of 2–10 mJ/m2), water interaction, and thermal stability of the CNCs were comparable, regardless of the biomass source and pretreatment methods. Our finding suggests that the TCF technique with peracetic acid treatment is a promising delignification and bleaching approach to obtain cellulose-rich pulps from herbaceous and hardwood biomass for nanocellulose isolation.

09 BIOMASS FUELS↗

Novel Extracellular Electron Transfer Channels in a Gram-Positive Thermophilic Bacterium

Biogenic transformation of Fe minerals, associated with extracellular electron transfer (EET), allows microorganisms to exploit high-potential refractory electron acceptors for energy generation. EET-capable thermophiles are dominated by hyperthermophilic archaea and Gram-positive bacteria. Information on their EET pathways is sparse. Here, we describe EET channels in the thermophilic Gram-positive bacterium Carboxydothermus ferrireducens that drive exoelectrogenesis and rapid conversion of amorphous mineral ferrihydrite to large magnetite crystals. Microscopic studies indicated biocontrolled formation of unusual formicary-like ultrastructure of the magnetite crystals and revealed active colonization of anodes in bioelectrochemical systems (BESs) by C. ferrireducens . The internal structure of micron-scale biogenic magnetite crystals is reported for the first time. Genome analysis and expression profiling revealed three constitutive c -type multiheme cytochromes involved in electron exchange with ferrihydrite or an anode, sharing insignificant homology with previously described EET-related cytochromes thus representing novel determinants of EET. Our studies identify these cytochromes as extracellular and reveal potentially novel mechanisms of cell-to-mineral interactions in thermal environments.

59 BASIC BIOLOGICAL SCIENCES↗

In-Situ Sensing and Dynamics Predictions for Electrothermally-Actuated Soft Robot Limbs

Untethered soft robots that locomote using electrothermally-responsive materials like shape memory alloy (SMA) face challenging design constraints for sensing actuator states. At the same time, modeling of actuator behaviors faces steep challenges, even with available sensor data, due to complex electrical-thermal-mechanical interactions and hysteresis. This article proposes a framework for in-situ sensing and dynamics modeling of actuator states, particularly temperature of SMA wires, which is used to predict robot motions. A planar soft limb is developed, actuated by a pair of SMA coils, that includes compact and robust sensors for temperature and angular deflection. Data from these sensors are used to train a neural network-based on the long short-term memory (LSTM) architecture to model both unidirectional (single SMA) and bidirectional (both SMAs) motion. Predictions from the model demonstrate that data from the temperature sensor, combined with control inputs, allow for dynamics predictions over extraordinarily long open-loop timescales (10 min) with little drift. Prediction errors are on the order of the soft deflection sensor’s accuracy. This architecture allows for compact designs of electrothermally-actuated soft robots that include sensing sufficient for motion predictions, helping to bring these robots into practical application.

Sabelhaus, Andrew P.↗

Methods for structural design at elevated temperatures

A procedure which can be used to design elevated temperature structures is discussed. The desired goal is to have the same confidence in the structural integrity at elevated temperature as the factor of safety gives on mechanical loads at room temperature. Methods of design and analysis for creep, creep rupture, and creep buckling are presented. Example problems are included to illustrate the analytical methods. Creep data for some common structural materials are presented. Appendix B is description, user's manual, and listing for the creep analysis program. The program predicts time to a given creep or to creep rupture for a material subjected to a specified stress-temperature-time spectrum. Fatigue at elevated temperature is discussed. Methods of analysis for high stress-low cycle fatigue, fatigue below the creep range, and fatigue in the creep range are included. The interaction of thermal fatigue and mechanical loads is considered, and a detailed approach to fatigue analysis is given for structures operating below the creep range.

Ellison, A. M.↗

Thermal conductivity and resonant multipole interactions.

Investigation of the influence of resonant multipole interactions on exchanges of rotational energy in molecular collisions, by means of a simple two-state impact-parameter approximation. It is found that dipole-quadrupole and quadrupole-quadrupole interactions can have a significant effect for molecules with low moments of inertia.

Nyeland, C.↗

Calculation of electron energy flux distributions in noble gases.

The electron flux spectrum has been calculated over the entire range from delta-ray energies to ionization-potential energies. Estimates based on the Born approximation indicate that electron-gas atom elastic losses can be neglected. Gryzinski's (1965) classical cross sections show that electron-thermalized electron interactions can be ignored. Under those conditions the energy degradation is primarily due to the excitation and ionization of background gas.

Lo, R.↗

Basic failure mechanisms in advanced composites

The fundamental failure mechanisms which result from the interaction of thermal cycling and mechanical loading of carbon-epoxy composites were studied. This work was confined to epoxy resin uniderictionally reinforced with HTS carbon fibers, and consists of first identifying local fiber, matrix and interface failure mechanisms using the model composite specimen containing a small number of fibers so that optical techniques can be used for characterization. After the local fracture process has been established for both mechanical loading and thermal cycling, engineering composite properties and gross fracture modes are then examined to determine how the local events contribute to real composite performance. Flexural strength in high fiber content specimens shows an increase in strength with increased thermal cycling. Similar behavior is noted for 25 v/o material up to 200 cycles; however, there is a drastic reduction after 200 cycles indicating a major loss of integrity probably through the accumulation of local cleavage cracks in the tensile region.

Mazzio, V. F.↗

Crystal activation experiment MA-151

The crystal activation experiment consisted of two sample packages that were flown in the command module and returned to earth for analysis of the radioactivity induced in them during the flight. The objective of the experiment was to define the background caused by detector activation that interferes when gamma radiation is measured in the 0.02- to 10-megaelectronvolt range from earth orbit. Preliminary results show that the activation of the NaI(Tl) crystal was a factor of 3 below that from a similar measurement on Apollo 17. The identification of certain species and the level of activation observed show an important contribution from the interactions of thermal and energetic neutrons produced as secondaries in the spacecraft. That the activation was reduced by only a factor of 3 compared with the Apollo 17 experiment, despite the geomagnetically shielded orbit, possibly indicates more efficient secondary neutron production by the more energetic cosmic rays.

Trombka, J. I.↗

Some aspects of the interaction of radiation with the thermal and mass budgets of cloud droplets

It is shown that the effects of radiative heating or cooling can have a substantial influence on the mass budget of a cloud droplet and thus on the microphysical properties of a cloud as a whole. The radiative transfer equation, including all orders of multiple scattering, is solved for spectral windows of earth's atmosphere by adopting the Eddington approximation and assuming that the cloud is isothermal and illuminated by fluxes from both the ground and the sky. The results obtained for the 8-12-micron window indicate that radiative cooling can increase a droplet's growth rate and may also make the droplet cooler than the surrounding gas while water vapor is diffusing in, which would cause diffusiophoreisis and thermophoreisis to combine and increase the efficiency with which droplets would scavenge aerosols.

Barkstrom, B. R.↗

New magnetic results from Allende C3/V/

Thermomagnetic analyses of Allende C3(V) suggest that magnetic phases contributing about 15% to saturation magnetization with transition temperatures not greater than 320 C, also contribute about 90% to natural remanence (NRM) and about 80% to the saturation isothermal remanence (SIRM). Phases carrying the dominating part of of the NRM are found to be intergrown, magnetically interacting, and thermally unstable, beginning at temperatures as low as 50 C. The ratio of the NRM/SIRM ranges from 0.004 to 0.006 for the bulk meteorite and from 0.0004 to 0.005 for chondrules of all sizes. The remanent coercive force behavior suggests coexisting magnetic phases with differing Curie points or with the low temperature transitions being due to transformation of a thermally metastable phase.

Wasilewski, P.↗

Spaceborne synthetic-aperture imaging radars - Applications, techniques, and technology

In June 1978, the Seasat satellite was placed into orbit around the earth with a synthetic-aperture imaging radar (SAR) as one of the payload sensors. The Seasat SAR provided, for the first time, synoptic radar images of the earth's surface with a resolution of 25 m. In November 1981, the second imaging radar was successfully operated from space on the Shuttle. The Shuttle Imaging Radar-A acquired images over a variety of regions around the world with an imaging geometry different from the one used by the Seasat SAR. The spaceborne SAR principle is discussed, taking into account ambiguities, orbital and environmental factors, range curvature and range walk, surface interaction mechanisms, thermal and speckle noise, key tradeoff parameters, and nonconventional SAR systems. Attention is also given to spaceborne SAR sensors, the digital processing of spaceborne SAR data, the optical processing of spaceborne SAR data, postimage formation processing, data interpretation techniques and applications, and the next decade.

Elachi, C.↗

Preliminary results of an assessment of FGGE 'special effort' data and its impact on GLAS model analyses and forecasts

Attempts to improve the handling of satellite temperature and cloud-derived data during the FGGE experiment are compared with results gained during the trials. The satellite data were edited by assigning quality indicators to temperature soundings by means of the IR TV camera on the Tiros-N spacecraft, and to cloud-tracked wind data from GEO satellites. The data quality were assayed on the basis of horizontal, vertical, and temporal consistency of observed synoptic conditions. The data interpreter-operator retrieved all available data for an area, determined which regions were data-sparse, then used data-rich areas nearby to supply smoothed gradients into the zones with insufficient data. Results are presented for measurements taken during Jan.-Feb., and May 1979 over Alaska. It was found that enhanced and operational IR soundings were mostly equivalent. Some improvements were implemented in the 1000-300 mb layer thickness and intensification of atmospheric thermal gradients. Interactive processing was concluded to be an aid to processing Tiros-N data. The data-improvements treatment was found to significantly modify large scale analyses.

Atlas, R.↗

The gas-grain interaction in the interstellar medium - Thermal accommodation and trapping

The paper develops a numerical model for calculating thermal accommodation coefficients alpha sub T and trapping functions f sub t for gases incident on solid surfaces. The method is especially designed for astrophysical applications in that it treats economically and with moderate accuracy (+ or - 20%) the dependences of alpha sub T and f sub t on finite and different surface and gas temperatures for a large number of gas-surface combinations. In particular, the method is applied to the astrophysical combinations of hydrogen and helium gases incident on graphite, silicon, and ice surfaces. Graphs are presented of the dependence of alpha sub T and f sub t on interstellar gas temperatures in the range of 10 to 10,000 K and grain temperatures in the range 10 to 1000 K, assuming the current estimates of the gas-surface physical parameters such as the composition and the Debye temperature of the grain material, the repulsive range of the surface potential, and the gas-grain adsorption energy.

Burke, J. R.↗

Direct simulation of transitional flow for hypersonic reentry conditions

This paper presents results of flowfield calculations for typical hypersonic reentry conditions encountered by the nose region of the Space Shuttle Orbiter. Most of the transitional flow regime is covered by the altitude range of 150 to 92 km. Calculations were made with the Direct Simulation Monte Carlo (DSMC) method that accounts for translational, rotational, vibrational, and chemical nonequilibrium effects. Comparison of the DSMC heating results with both Shuttle flight data and continuum predictions showed good agreement at the lowest altitude considered. However, as the altitude increased, the continuum predictions, which did not include slip effects, departed rapidly from the DSMC results by overpredicting both heating and drag. The results demonstrate the effects of rarefaction on the shock and the shock layer, along with the extent of the slip and temperature jump at the surface. Also, the sensitivity of the flow structure to the gas-surface interaction model, thermal accommodation, and surface catalysis are studied.

Moss, J. N.↗

Simulation study of Type 2 counterstreaming electrons along auroral field lines

The production of counterstreaming electrons associated with parallel fields along auroral field lines is examined through the use of computer simulation. A 2 1/2-dimensional (two spatial and three velocity dimensions) electrostatic particle algorithm and auroral boundary conditions are used to set up a self-consistent V potential structure. The simulation produces signatures of counterstreaming electrons resembling those observed by the Dynamics Explorer 1 satellite. The main signatures are as follows: (1) the phase space contours of the electron distribution function are elongated along the V-parallel axis, and (2) the energy of electrons streaming in the upward direction is comparable to the energy of the accelerated electron beam. The simulation indicates that a portion of the accelerated electron beam is trapped by large amplitude electrostatic waves produced through the two-stream instability. Strong wave-particle interactions then thermalize the trapped electrons to produce suprathermal electrons streaming in the direction opposite to that of the accelerated electron beam. These results suggest a possible mechanism of producing counterstreaming electron fluxes through nonlinear processes of the two-stream instability.

Wagner, J. S.↗

Variable-Conductance Heat Pipes

In response to need to accurately and efficiently predict performance of variable-conductance heat pipes (VCHP's) incorporated in spacecraft thermalcontrol systems, computer code VCHPDA developed to interact with thermal analyzer programs such as SINDA (Systems Improved Numerical Differencing Analyzer). Calculates length of gas-blocked region and vapor temperature in active portion. Advantages of VCHPDA over prior programs improved accuracy, unconditional stability, and increased efficiency of solution resulting from novel approach and use of state-of-the-art numerical techniques for solving VCHP mathematical model. Code valuable tool in design and evaluation of advanced thermal-control systems using variable-conductance heat pipes. Written in FORTRAN IV for use on CDC 600 computers.

Antoniuk, D.↗