Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal model exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Nuclear modules for space electric propulsion

Analysis of interplanetary cargo and piloted missions requires calculations of the performances and masses of subsystems to be integrated in a final design. In a preliminary and scoping stage the designer needs to evaluate options iteratively by using fast computer simulations. The Oak Ridge National Laboratory (ORNL) has been involved in the development of models and calculational procedures for the analysis (neutronic and thermal hydraulic) of power sources for nuclear electric propulsion. The nuclear modules will be integrated into the whole simulation of the nuclear electric propulsion system. The vehicles use either a Brayton direct-conversion cycle, using the heated helium from a NERVA-type reactor, or a potassium Rankine cycle, with the working fluid heated on the secondary side of a heat exchanger and lithium on the primary side coming from a fast reactor. Given a set of input conditions, the codes calculate composition. dimensions, volumes, and masses of the core, reflector, control system, pressure vessel, neutron and gamma shields, as well as the thermal hydraulic conditions of the coolant, clad and fuel. Input conditions are power, core life, pressure and temperature of the coolant at the inlet of the core, either the temperature of the coolant at the outlet of the core or the coolant mass flow and the fluences and integrated doses at the cargo area. Using state-of-the-art neutron cross sections and transport codes, a database was created for the neutronic performance of both reactor designs. The free parameters of the models are the moderator/fuel mass ratio for the NERVA reactor and the enrichment and the pitch of the lattice for the fast reactor. Reactivity and energy balance equations are simultaneously solved to find the reactor design. Thermalhydraulic conditions are calculated by solving the one-dimensional versions of the equations of conservation of mass, energy, and momentum with compressible flow.

Difilippo, F. C.↗
NASA NTRS1992

A hybrid flow model for charged and neutral particles around spacecraft in Low Earth Orbit

A flow simulation for charged and neutral particles around spacecraft is given that combines the fully coupled effects of neutral particle flow, plasma flow, electromagnetic field effects, and spacecraft charging. The simulation allows for chemically reacting flows (associative ionization, dissociation, and chain exchange) and for thermal accommodation at a spacecraft surface. The solution procedure was applied to several types of flows with orbital altitudes ranging from 250 km to 500 km. Excellent agreement with previously verified computational algorithms was obtained for both the neutral and charged particle cases. Results for the full flow simulation are presented for altitudes of 250 km and 500 km.

Justiz, Charles R.↗
NASA NTRS2016

A Study of Heat Transfer and Flow Characteristics of Rising Taylor Bubbles

Practical application of flow boiling to ground- and space-based thermal management systems hinges on the ability to predict the systems heat removal capabilities under expected operating conditions. Research in this field has shown that the heat transfer coefficient within two-phase heat exchangers can be largely dependent on the experienced flow regime. This finding has inspired an effort to develop mechanistic heat transfer models for each flow pattern which are likely to outperform traditional empirical correlations. As a contribution to the effort, this work aimed to identify the heat transfer mechanisms for the slug flow regime through analysis of individual Taylor bubbles.An experimental apparatus was developed to inject single vapor Taylor bubbles into co-currently flowing liquid HFE 7100. The heat transfer was measured as the bubble rose through a 6 mm inner diameter heated tube using an infrared thermography technique. High-speed flow visualization was obtained and the bubble film thickness measured in an adiabatic section. Experiments were conducted at various liquid mass fluxes (43-200 kgm2s) and gravity levels (0.01g-1.8g) to characterize the effect of bubble drift velocityon the heat transfer mechanisms. Variable gravity testing was conducted during a NASA parabolic flight campaign.Results from the experiments showed that the drift velocity strongly affects the hydrodynamics and heat transfer of single elongated bubbles. At low gravity levels, bubbles exhibited shapes characteristic of capillary flows and the heat transfer enhancement due to the bubble was dominated by conduction through the thin film. At moderate to high gravity, traditional Taylor bubbles provided small values of enhancement within the film, but large peaks in the wake heat transfer occurred due to turbulent vortices induced by the film plunging into the trailing liquid slug. Characteristics of the wake heat transfer profiles were analyzed and related to the predicted velocity field. Results were compared and shown to agree with numerical simulations of colleagues from EPFL, Switzerland.In addition, a preliminary study was completed on the effect of a Taylor bubble passing through nucleate flow boiling, showing that the thinning thermal boundary layer within the film suppressed nucleation, thereby decreasing the heat transfer coefficient.

capillary flow↗
NASA NTRS1976

Heat Transfer and Fluid Mechanics Institute, Meeting, 25th, University of California, Davis, Calif., June 21-23, 1976, Proceedings

Major research advances in heat transfer and fluid dynamics are outlined, with particular reference to relevant energy problems. Of significant importance are such topics as synthetic fuels in combustion, turbulence models, combustion modeling, numerical methods for interacting boundary layers, and light-scattering diagnostics for gases. The discussion covers thermal convection, two-phase flow and boiling heat transfer, turbulent flows, combustion, and aerospace heat transfer problems. Other areas discussed include compressible flows, fluid mechanics and drag, and heat exchangers. Featured topics comprise heat and salt transfer in double-diffusive systems, limits of boiling heat transfer in a liquid-filled enclosure, investigation of buoyancy-induced flow stratification in a cylindrical plenum, and digital algorithms for dynamic analysis of a heat exchanger. Individual items are announced in this issue.

Mckillop, A. A.↗
NASA NTRSDate not supplied

Analysis of Oxygen Liquefaction with Transient Flow Rates for ISRU Systems

Human occupation of lunar and Martian surfaces requires in-situ resource utilization (ISRU) to create a sustainable environment with the limited resources available in space. Fuel and oxidizer generation is essential for developing a refueling capability for spacecraft, significantly reducing the propellant mass required for landing. Liquefaction systems are a key step in producing and storing cryogenic liquids such as oxygen, hydrogen, and methane. All those fluids are critical to propulsion, life support, and other spacecraft systems. NASA has previously confirmed the presence of water on the Moon and an electrolysis process can be used to separate the oxygen from the hydrogen molecules. Oxygen has also been found within lunar regolith and can be separated through ISRU processes. The extracted oxygen gas can then be liquefied inside a storage tank with tube-on-tank heat exchangers for future use as an oxidizer for propellants. While steady state liquefaction performance is easy to model, power limitations and cyclical environments caused by the change in Sun exposure between day and night periods potentially call for transient operations. The following analysis was performed using the Thermal Desktop software to investigate how various transient gaseous oxygen (GOX) flow rates impact the production and storage of liquid oxygen (LOX) in a 1-g liquefaction system. Variations of sinusoidal and exponential step functions were selected to model potential GOX flow rates that could be experienced by ISRU systems on lunar or Martian surfaces. This early computational analysis provides some insight on how transient operations impact oxygen liquefaction systems and helps illustrate operational questions to explore experimentally throughout the design process.

Cryogenic Fluid Management↗
NASA NTRSDate not supplied

Communicating Metrics of Land Surface Temperature Variability Using Multi-sensor Machine Learning

Land surface temperature (LST) is a key climate observable used to detect changes in the Earth’s surface energy budget that influence carbon and water cycles. Land surface temperature exhibits strong diurnal variability, which geostationary satellites can observe at scale thanks to their temporal resolution. Due to anthropogenic climate and land use changes, the surface energy balance has been considerably modified and may be described by changes in diurnal temperature range and extremes. Using high performance computing and datasets from the NASA Earth Exchange, we exploit co-located, co-temporal observations from low-earth orbit (LEO) and geostationary (GEO) sensors to develop a deep learning-based method for LEO-to-GEO algorithm emulation. Our model is trained to predict MODIS Terra LST from GOES-16 thermal bands and achieves validation error <2K. Application of the model to unseen times of day (observed by MODIS Aqua) and a new GEO sensor (Himawari-8) observing an unseen spatial domain, demonstrate the generalization of the deep learning model across space, time and spectra. Further, time series clustering approaches are examined with the objective of identifying key indicators of change in diurnal cycling and extremes on a continental scale. Communicating LST variability observed by geostationary satellites can have impacts in multiple disciplines, from understanding of snow, vegetation and soil dynamics, to recognizing trends in heat events relevant to human health.

Kate Duffy↗
NASA NTRSDate not supplied

LEO Sensor to GEO Sensor Algorithm Transfer Models for Land Surface Temperature

Land surface temperature (LST) is a key climate observable used to detect changes in the Earth’s surface energy budget that influence carbon and water cycles. Land surface temperature exhibits strong diurnal variability, which geostationary satellites can observe at scale thanks to their temporal resolution. Due to anthropogenic climate and land use changes, the surface energy balance has been considerably modified and may be described by changes in diurnal temperature range and extremes. Using high performance computing and datasets from the NASA Earth Exchange, we exploit co-located, co-temporal observations from low-earth orbit (LEO) and geostationary (GEO) sensors to develop a deep learning-based method for LEO-to-GEO algorithm emulation. Our model is trained to predict MODIS Terra LST from GOES-16 thermal bands and achieves validation error <2K. Application of the model to unseen times of day (observed by MODIS Aqua) and a new GEO sensor (Himawari-8) observing an unseen spatial domain, demonstrate the generalization of the deep learning model across space, time and spectra. Communicating diurnal LST variability observed by geostationary satellites can have impacts in multiple disciplines, from understanding of snow, vegetation and soil dynamics, to recognizing trends in heat events relevant to human health.

Kate Marie Duffy↗
NASA NTRS2015

Design and Test of a Liquid Oxygen / Liquid Methane Thruster with Cold Helium Pressurization Heat Exchanger

A liquid oxygen / liquid methane 2,000 lbf thruster was designed and tested in conjuction with a nozzle heat exchanger for cold helium pressurization. Cold helium pressurization systems offer significant spacecraft vehicle dry mass savings since the pressurant tank size can be reduced as the pressurant density is increased. A heat exchanger can be incorporated into the main engine design to provide expansion of the pressurant supply to the propellant tanks. In order to study the systems integration of a cold-helium pressurization system, a 2,000 lbf thruster with a nozzle heat exchanger was designed for integration into the Project Morpheus vehicle at NASA Johnson Space Center. The testing goals were to demonstrate helium loading and initial conditioning to low temperatures, high-pressure/low temperature storage, expansion through the main engine heat exchanger, and propellant tank injection/pressurization. The helium pressurant tank was an existing 19 inch diameter composite-overwrap tank, and the targert conditions were 4500 psi and -250 F, providing a 2:1 density advantage compared to room tempatrue storage. The thruster design uses like-on-like doublets in the injector pattern largely based on Project Morpheus main engine hertiage data, and the combustion chamber was designed for an ablative chamber. The heat exchanger was installed at the ablative nozzle exit plane. Stand-alone engine testing was conducted at NASA Stennis Space Center, including copper heat-sink chambers and highly-instrumented spoolpieces in order to study engine performance, stability, and wall heat flux. A one-dimensional thermal model of the integrated system was completed. System integration into the Project Morpheus vehicle is complete, and systems demonstrations will follow.

Melcher, John C.↗
NASA NTRSDate not supplied

Isotopic Tracers for CO 2 Produced During A Planetary Impact Into Limestone Target Rocks

Terrestrial meteorite impacts have been directly linked with multiple mass extinction events throughout Earth’s history. Among these impacts, those that land in sedimentary target rocks are thought to generate large quantities of CO 2 via decarbonation. This injection of CO 2 into the atmosphere has the potential to alter the climate and threaten terrestrial habitability. The magnitude of this change depends upon the net amount of CO 2 released, which is controlled by how much CO 2 is produced by the impact, how much CO 2 is removed by back-reactions after the impact, and other post-impact CO 2 sinks. To interrogate the behavior of CO 2 release into the impact atmosphere, we present carbon (δ 13 C), oxygen (δ 18 O), and clumped (Δ 47 ) isotope results from carbonate clasts preserved within the impact breccia of the Steen River Impact Structure (SRIS) in Alberta, Canada. These clasts exhibit a ~65‰ range in δ 13 C and a ~5‰ variation in δ 18 O. However, while δ 13 C and δ 18 O are positively correlated, Δ 47 unexpectedly has a negative relationship with δ 13 C and δ 18 O. Based on prior assumptions, there would either be (1) no relationship with carbonate Δ 47 and the bulk ratios because Δ 47 would be reset at extreme impact temperatures, or (2) Δ 47 would have a positive correlation with the bulk ratios, reflecting gradual Δ 47 ‘resetting.’ To reconcile the SRIS result with these expectations, we conducted a series of in vacuo heating experiments at temperatures above calcite decomposition. As predicted by Rayleigh fractionation, these heating experiments generated depletions in δ 13 C and δ 18 O that increased with reaction time. Mimicking the SRIS results, these experiments also produced concomitant increases in Δ 47 . Using an adaptation of a mechanistic model for decomposition fractionation (Hayles & Killingsworth, 2022) we hypothesize that these exotic isotope trends are caused by Rayleigh fractionation and a Δ 47 kinetic isotope effect that results from the disproportionation of O to CaO and CO 2 during thermal decomposition. This high Δ 47 CO 2 subsequently exchanges with the residual CaCO 3 . This work highlights a potential pathway for identifying and quantifying CO 2 generation by impacts and builds on the relatively limited literature characterizing the behavior of carbonate clumped isotopes at very high geologic temperatures.

Multi-isotope systems↗
NASA NTRS2005

Performance and Mass Modeling Subtleties in Closed-Brayton-Cycle Space Power Systems

Contents include the following: 1. Closed-Brayton-cycle (CBC) thermal energy conversion is one available option for future spacecraft and surface systems. 2. Brayton system conceptual designs for milliwatt to megawatt power converters have been developed 3. Numerous features affect overall optimized power conversion system performance: Turbomachinery efficiency. Heat exchanger effectiveness. Working-fluid composition. Cycle temperatures and pressures.

Barrett, Michael J.↗
NASA NTRS1999

Dynamics and Structure of Dusty Reacting Flows: Inert Particles in Strained, Laminar, Premixed Flames

A detailed numerical study was conducted on the dynamics and thermal response of inert, spherical particles in strained, laminar, premixed hydrogen/air flames. The modeling included the solution of the steady conservation equations for both the gas and particle phases along and around the stagnation streamline of an opposed-jet configuration, and the use of detailed descriptions of chemical kinetics and molecular transport, For the gas phase, the equations of mass, momentum, energy, and species are considered, while for the particle phase, the model is based on conservation equations of the particle momentum balance in the axial and radial direction, the particle number density, and the particle thermal energy equation. The particle momentum equation includes the forces as induced by drag, thermophoresis, and gravity. The particle thermal energy equation includes the convective/conductive heat exchange between the two phases, as well as radiation emission and absorption by the particle. A one-point continuation method is also included in the code that allows for the description of turning points, typical of ignition and extinction behavior. As expected, results showed that the particle velocity can be substantially different than the gas phase velocity, especially in the presence of large temperature gradients and large strain rates. Large particles were also found to cross the gas stagnation plane, stagnate, and eventually reverse as a result of the opposing gas phase velocity. It was also shown that the particle number density varies substantially throughout the flowfield, as a result of the straining of the flow and the thermal expansion. Finally, for increased values of the particle number density, substantial flame cooling to extinction states and modification of the gas phase fluid mechanics were observed. As also expected, the effect of gravity was shown to be important for low convective velocities and heavy particles. Under such conditions, simulations indicate that the magnitude and direction of the gravitational force can substantially affect the profiles of the particle velocity, number density, mass flux, and temperature.

Egolfopoulos, Fokion N.↗
NASA NTRS1999

Dynamics and Structure of Dusty Reacting Flows: Inert Particles in Strained, Laminar, Premixed Flames

A detailed numerical study was conducted on the dynamics and thermal response of inert spherical particles in strained, laminar, premixed hydrogen/air flames. The modeling included the solution of the steady conservation equations for both the gas and particle phases along and around the stagnation streamline of an opposed-jet configuration, and the use of detailed descriptions of chemical kinetics and molecular transport. For the gas phase, the equations of mass, momentum, energy, and species are considered, while for the particle phase, the model is based on conservation equations of the particle momentum balance in the axial and radial direction, the particle number density, and the particle thermal energy equation. The particle momentum equation includes the forces as induced by drag, thermophoresis, and gravity. The particle thermal energy equation includes the convective/conductive heat exchange between the two phases, as well as radiation emission and absorption by the particle. A one-point continuation method is also included in the code that allows for the description of turning points, typical of ignition and extinction behavior. As expected, results showed that the particle velocity can be substantially different than the gas phase velocity, especially in the presence of large temperature gradients and large strain rates. Large particles were also found to cross the gas stagnation plane, stagnate, and eventually reverse as a result of the opposing gas phase velocity. It was also shown that the particle number density varies substantially throughout the flowfield, as a result of the straining of the flow and the thermal expansion. Finally, for increased values of the particle number density, substantial flame cooling to extinction states and modification of the gas phase fluid mechanics were observed. As also expected, the effect of gravity was shown to be important for low convective velocities and heavy particles. Under such conditions, simulations indicate that the magnitude and direction of the gravitational force can substantially affect the profiles of the particle velocity, number density, mass flux, and temperature.

Egolfopoulos, Fokion N.↗
NASA NTRS1977

A reexamination of two-fluid solar wind models

The two-fluid solar-wind equations have been solved by a method which is approximately 50 times faster than any previously developed, through the use of asymptotic expansions which are self-consistently iterated upon to find a solution that passes through the critical point. The energy assumptions in two-fluid solar-wind models are reexamined, and the conclusions are as follows: (1) proton thermal conduction may not be neglected, (2) the Coulomb logarithm must be calculated as a function of radius, and (3) the electron and proton temperatures at the base need not be equal, even when the time scale for energy exchange between the species is an order of magnitude smaller than the expansion time at the base. It is possible to reproduce reasonable quiet-time solar-wind parameters at 1 AU, but only if the proton temperature is approximately twice the electron temperature at 1 solar radius. This may indicate that extended proton heating is important in the outer solar corona. Winds with velocities at 1 AU of 450 km/s are generated without nonthermal energy deposition but require high proton temperatures as well as very low densities at the base. Higher-velocity solutions are not possible in a spherically symmetric geometry for reasonable particle fluxes at 1 AU, and it is suggested that these higher-velocity states probably require additional heating, acceleration mechanisms, or nonradial flow.

Nerney, S.↗
NASA NTRS2022

Flows in Enthalpy-based Thermal Evolution of Loops

Plasma-filled loop structures are common in the solar corona. Because detailed modeling of the dynamical evolution of these structures is computationally costly, an efficient method for computing approximate but quick physics-based solutions is to rely on space-integrated 0D simulations. The enthalpy-based thermal evolution of loops (EBTEL) framework is a commonly used method to study the exchange of mass and energy between the corona and transition region. EBTEL solves for density, temperature, and pressure, averaged over the coronal part of the loop, velocity at coronal base, and the instantaneous differential emission measure distribution in the transition region. The current single-fluid version of the code, EBTEL2, assumes that at all stages the flows are subsonic. However, sometimes the solutions show the presence of supersonic flows during the impulsive phase of heat input. It is thus necessary to account for this effect. Here, we upgrade EBTEL2 to EBTEL3 by including the kinetic energy term in the Navier–Stokes equation. We compare the solutions from EBTEL3 with those obtained using EBTEL2, as well as the state-of-the-art field-aligned hydrodynamics code HYDRAD. We find that the match in pressure between EBTEL3 and HYDRAD is better than that between EBTEL2 and HYDRAD. Additionally, the velocities predicted by EBTEL3 are in close agreement with those obtained with HYDRAD when the flows are subsonic. However, EBTEL3 solutions deviate substantially from HYDRAD’s when the latter predicts supersonic flows. Using the mismatches in the solution, we propose a criterion to determine the conditions under which EBTEL can be used to study flows in the system.

Solar coronal heating↗
NASA NTRS2008

Virtual Satellite

Virtual Satellite (VirtualSat) is a computer program that creates an environment that facilitates the development, verification, and validation of flight software for a single spacecraft or for multiple spacecraft flying in formation. In this environment, enhanced functionality and autonomy of navigation, guidance, and control systems of a spacecraft are provided by a virtual satellite that is, a computational model that simulates the dynamic behavior of the spacecraft. Within this environment, it is possible to execute any associated software, the development of which could benefit from knowledge of, and possible interaction (typically, exchange of data) with, the virtual satellite. Examples of associated software include programs for simulating spacecraft power and thermal- management systems. This environment is independent of the flight hardware that will eventually host the flight software, making it possible to develop the software simultaneously with, or even before, the hardware is delivered. Optionally, by use of interfaces included in VirtualSat, hardware can be used instead of simulated. The flight software, coded in the C or C++ programming language, is compilable and loadable into VirtualSat without any special modifications. Thus, VirtualSat can serve as a relatively inexpensive software test-bed for development test, integration, and post-launch maintenance of spacecraft flight software.

Hammrs, Stephan R.↗
NASA NTRS2012

Application of a High-Fidelity Icing Analysis Method to a Model-Scale Rotor in Forward Flight

An icing analysis process involving the loose coupling of OVERFLOW-RCAS for rotor performance prediction and with LEWICE3D for thermal analysis and ice accretion is applied to a model-scale rotor for validation. The process offers high-fidelity rotor analysis for the noniced and iced rotor performance evaluation that accounts for the interaction of nonlinear aerodynamics with blade elastic deformations. Ice accumulation prediction also involves loosely coupled data exchanges between OVERFLOW and LEWICE3D to produce accurate ice shapes. Validation of the process uses data collected in the 1993 icing test involving Sikorsky's Powered Force Model. Non-iced and iced rotor performance predictions are compared to experimental measurements as are predicted ice shapes.

Narducci, Robert↗
NASA NTRS1980

Thermal energy storage systems using fluidized bed heat exchangers

The viability of using fluidized bed heat exchangers (FBHX) for thermal energy storage (TES) in applications with potential for waste heat recovery was investigated. Of the candidate applications screened, cement plant rotary kilns and steel plant electric arc furnaces were identified, via the chosen selection criteria, as having the best potential for successful use of FBHX/TES system. A computer model of the FBHX/TES systems was developed and the technical feasibility of the two selected applications was verified. Economic and tradeoff evaluations in progress for final optimization of the systems and selection of the most promising system for further concept validation are described.

Ramanathan, V.↗
NASA NTRS1980

Thermal energy storage systems using fluidized bed heat exchangers

A rotary cement kiln and an electric arc furnace were chosen for evaluation to determine the applicability of a fluid bed heat exchanger (FBHX) for thermal energy storage (TES). Multistage shallow bed FBHX's operating with high temperature differences were identified as the most suitable for TES applications. Analysis of the two selected conceptual systems included establishing a plant process flow configuration, an operational scenario, a preliminary FBHX/TES design, and parametric analysis. A computer model was developed to determine the effects of the number of stages, gas temperatures, gas flows, bed materials, charge and discharge time, and parasitic power required for operation. The maximum national energy conservation potential of the cement plant application with TES is 15.4 million barrels of oil or 3.9 million tons of coal per year. For the electric arc furnance application the maximum national conservation potential with TES is 4.5 million barrels of oil or 1.1 million tons of coal per year. Present time of day utility rates are near the breakeven point required for the TES system. Escalation of on-peak energy due to critical fuel shortages could make the FBHX/TES applications economically attractive in the future.

Weast, T.↗