Search NASA⌕ Search

SEARCH · Search NASA

Results for “thin-films”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Milliwatt-level UV generation using sidewall poled lithium niobate

Integrated coherent sources of ultra-violet (UV) light are essential for a wide range of applications, from ion-based quantum computing and optical clocks to gas sensing and microscopy. Recently, approaches that use frequency upconversion have received considerable attention. Among these, the integrated thin-film lithium niobate (TFLN) photonic platform shows particular promise. However, to date, the high propagation losses and lack of reliable techniques for consistent poling of cm-long waveguides with small poling periods have impeded progress. Here, we present a sidewall poled lithium niobate (SPLN) waveguide approach that overcomes these obstacles and results in a two-orders-of-magnitude increase in generated UV power. We demonstrate SPLN waveguides featuring record-low propagation losses of 2.3 dB/cm, complete domain inversion across the waveguide cross-section, and an optimum 50% duty cycle, resulting in a record-high normalized conversion efficiency of 5050%W$^{−1}$cm$^{−2}$, and 4.2 mW of generated on-chip power at 390 nm wavelength. This advancement makes the TFLN platform a viable option for high-quality on-chip UV generation, benefiting emerging applications.

Franken, C. A.A. [Harvard U.; Twente U., Enschede]↗

Pseudo-equilibrium theory for extrinsic doping control of the topological semimetal Cd 3 As 2

The standard approach for predicting defect equilibria from first principles assumes that the solid-state system is initially in a thermodynamic equilibrium with the external atomic reservoirs. This “growth step” is then often followed by a temperature quench in a “pseudo-equilibrium” in which some or all defect concentrations are frozen in until only the Fermi level E F remains to be equilibrated. However, this protocol does not account for the possibility of site exchanges which can create important defect redistributions as long as short-range defect migration is kinetically permissible. To model this redistribution, we developed an approach to solve for the non-equilibrium chemical potentials as a function of temperature while maintaining the overall defect stoichiometry. We then apply this approach to the Dirac semimetal Cd 3 As 2 to model extrinsic doping with group 1/11 and 14 elements. Undoped Cd 3 As 2 exhibits an undesirable mismatch between E F and the Dirac point. This unintentional electron doping originates from intrinsic defects and is difficult to overcome through adjustment of synthesis conditions alone. Employing our pseudo-equilibrium modeling, we identify extrinsic doping strategies for realizing doping-balanced Cd 3 As 2 at the relatively low temperatures accessible in thin-film growth of this material.

36 MATERIALS SCIENCE↗

Superconductivity and normal-state transport in compressively strained La 2 PrNi 2 O 7 thin films

The discovery of superconductivity under high pressure in Ruddlesden-Popper phases of bulk nickelates has sparked great interest in stabilizing ambient pressure superconductivity in thin-film form using epitaxial strain. Recently, signs of superconductivity have been observed in compressively strained bilayer nickelate thin films with an onset temperature exceeding 40 K, albeit with broad and two-step-like transitions. Here, in this study, we report intrinsic superconductivity and normal-state transport properties in compressively strained La 2 PrNi 2 O 7 thin films, achieved through a combination of isovalent Pr substitution, growth optimization, and precision ozone annealing. The superconducting onset occurs above 48 K, with zero resistance reached above 30 K, and the critical current density at 1.4 K is 100-fold larger than previous reports. The normal-state resistivity exhibits quadratic temperature dependence indicative of Fermi liquid behaviour, and other phenomenological similarities to transport in overdoped cuprates suggest parallels in their emergent properties.

Liu, Yidi [SLAC National Accelerator Laboratory (S↗

Probing polarization-tunable sub-terahertz spin pumping in bimodal α-Fe 2 O 3 /Pt

Hematite (α-Fe 2 O 3 ) is an insulating antiferromagnet possessing a room temperature canted phase induced by the super-exchange Dzyaloshinskii-Moriya Interaction (DMI), resulting in enhanced spin pumping and spin transport over uniaxial antiferromagnets. In this work we resonantly excite the quasi-ferromagnetic (acoustic) and purely antiferromagnetic (optical) spin-dynamical modes in bulk and thin-film heterostructures of α-Fe 2 O 3 /Pt at room temperature, inducing inverse-spin-Hall-voltages up to 255 GHz. Following recent measurements of optical-mode spin-pumping in α-Fe 2 O 3 , we observe a novel and exotic microwave polarization mapping along with amplified spin-charge conversion in the optical branch and discuss the implications of layer thickness on acoustic and optical spin-modes. The results provide a deeper understanding of spin-wave selection rules for canted antiferromagnets and their potential use in nanoscale terahertz spintronics.

interfaces↗

Manipulation of intramolecular hydrogen bonds in conjugated pseudoladder polymer for semiconductivity and solution-processability

The conformational coplanarity and local rigidity of π-conjugated backbones are critical for the semiconducting performance of organic electronic materials. The conformational coplanarity and local rigidity of π-conjugated backbones are critical for the semiconducting performance of organic electronic materials. While fusing the aromatic system into a ladder-type structure effectively enhances these properties, it also often results in poor solution processability and hence limits their transition to device application. To address this challenge, an intramolecularly hydrogen-bonded pseudoladder polymer (HPLP) system based on alternating hydrogen bond donating benzobisimidazole (BBI) and hydrogen bond accepting benzodifuran (BDF) units, is designed and synthesized. A Boc-protected precursor of HPLP allows for feasible solution processing of the polymer into thin films. Subsequently, in situ thermal Boc-deprotection generates the HPLP polymer, in which intramolecular hydrogen bonds form between each pair of neighboring repeating units, inducing coplanarity and rigidity throughout the entire backbone. This process is accompanied by a significant red-shift of the absorption spectrum, reduced bandgap, and enhanced rigidity, as confirmed by NMR, UV-Vis, and density functional theory analyses. HPLP films exhibit a three-order-of-magnitude enhancement in charge carrier mobility compared to the Boc-protected precursor and demonstrate excellent solvent resistance in organic thin-film transistors.

Miranda, Octavio↗

Bypassing sulfides: comparing the morphology and performance of solution processed Cu(In,Ga)Se 2 films prepared via two selenide molecular precursor routes

Solution-processing of thin-film photovoltaics offers an alternative to vacuum-deposition based approaches. The amine–thiol reactive solvent system has become a focal point for the solution-processing of chalcogenide species, owing to the convenience of precursor preparation and comparatively high performance of prepared devices. Selenide species prepared via the amine–thiol route typically progress through a sulfide intermediate phase, and as such are commonly afflicted with sulfur and carbon impurities along- side the presence of a carbonaceous fine-grained layer. Here, two routes of preparing films directly to a selenide phase are examined; first by the co-dissolution of selenium in an amine–thiol solution and second via the novel use of reactive alkylammonium polyselenides. Lamella are cut from these selenide precursor films and final devices, and STEM-EDX and TEM are used to characterize film morphology and secondary phases. A champion device efficiency of 11.2% is reported for the novel polyselenide route, and clear paths of improvement are identified.

36 MATERIALS SCIENCE↗

Thin Film Synthesis of SrZn2P2 with SrI2 Post-Annealing for Enhanced Crystallinity and Optoelectronic Quality

Ternary Zintl phosphides are promising light-absorbing semiconductors for thin-film optoelectronic applications, but strategies for controlling their microstructure and optoelectronic quality remain underexplored. Here, we report the synthesis of phase-pure SrZn2P2 thin films using radio-frequency co-sputtering in a PH3 + Ar atmosphere and investigate the impact of post-growth processing on their structural and optical properties. Grazing-incidence X-ray scattering and Raman spectroscopy confirm the formation of crystalline SrZn2P2 films over a finite compositional window. Optical measurements reveal clear absorption near the direct-band-gap energy (~1.8 eV) and near-band-edge photoluminescence. Further, we have studied the effects of chemically compatible halide-assisted annealing. It is found that SrI2 treatments lead to pronounced grain growth and reduced diffraction peak broadening while preserving phase purity, in contrast to rapid thermal or forming-gas annealing. Notably, annealing with SrI2 at 450 degrees C significantly enhances both the intensity and spatial uniformity of the photoluminescence, thus connecting the observed microstructural consolidation with improved radiative recombination. Our study demonstrates that halide-assisted annealing provides an effective pathway for microstructural control in SrZn2P2 thin films and highlights a generalizable processing strategy for advancing Zintl phosphide semiconductors toward optoelectronic applications.

14 SOLAR ENERGY↗

Stability, growth, and doping of In 2 (Si, Ge) 2 O 7 : Promising n -type wide-bandgap semiconductors

In this paper, we investigate, computationally and experimentally, the phase stability, electronic structure properties, and the propensity for n-type doping of In 2 X 2 O 7 (X = Si, Ge) ternary oxides. This family of materials contains promising novel wide-gap semiconductors based on their estimated high n-type Baliga figures of merit and acceptable thermal conductivity for power electronics applications. Here, we predict that both In 2 Si 2 O 7 and In 2 Ge 2 O 7 are n-type dopable, with Zr providing between 10 16 and above 10 21 cm −3 net donor concentrations under O-poor conditions, depending on the chemistry, structure (ground-state thortveitite or high-pressure pyrochlore), and synthesis temperature. To verify our predictions, we synthesize Zr-doped In 2 Ge 2 O 7 in the thortveitite structure and measure its electrical properties. Initial thin-film growth and annealing lead to polycrystalline thin films with bandgaps over 4 eV and confirm Zr doping predictions by achieving electron concentrations at 10 14 –10 16 cm −3 even under O-rich conditions. While future epitaxial growth development is still needed, this study establishes In 2 X 2 O 7 as promising n-type wide-gap semiconductors for power electronic applications.

36 MATERIALS SCIENCE↗

Electronic mobility, doping, and defects in epitaxial BaZrS 3 chalcogenide perovskite thin films

We present the electronic transport properties of BaZrS 3 thin films grown epitaxially by gas-source molecular beam epitaxy. We observe n-type behavior in all samples, with carrier concentration ranging from 4 × 10 18 to 4 × 10 20 cm −3 at room temperature (RT). We observe a champion RT Hall mobility of 11.1 cm 2 V −1 s −1 , which is competitive with established thin-film photovoltaic absorbers. Temperature-dependent Hall mobility data show that phonon scattering dominates at room temperature, in agreement with computational predictions. X-ray diffraction data illustrate a correlation between mobility and antiphase boundary concentration, illustrating how microstructure can affect transport. Despite the well-established environmental stability of chalcogenide perovskites, we observe significant changes to electronic properties as a function of storage time in ambient conditions. With the help of secondary ion mass spectrometry measurements, we propose and support a defect mechanism that explains this behavior: as-grown films have a high concentration of sulfur vacancies that are shallow donors (V ⋅ S or V ⋅⋅ S ), which are converted into neutral oxygen defects (O$^{×}_{S}$) upon air exposure. We discuss the relevance of this defect mechanism within the larger context of chalcogenide perovskite research, and we identify means to stabilize the electronic properties.

Van Sambeek, Jack [Massachusetts Institute of Tech↗

Correcting impedance measurements for background parasitics to characterize circuit components in cryogenic environments

Predictable circuit response is a critical prerequisite for accurate electronic measurements. Here, we describe a powerful yet straightforward experimental method and analysis model that utilizes an affordable LCR meter in conjunction with an in situ parasitic-impedance background-correction procedure to measure the temperature-dependent impedance (magnitude and phase) of up to ten individual passive circuit elements in a single cryostat run. We show how the model unambiguously identified a ∼20× drop in capacitance for 22 μF 5XR multilayer ceramic capacitors cooled from 300 K to 360 mK in an environment with a parasitic capacitance of ∼300 pF. The same experimental procedure, based on a simple two-wire measurement, was also used to measure 10 and 22 pF thin-film capacitors and 100 MΩ thick-film resistors. The results showed that the resistor values increased by up to an order of magnitude when the devices were cooled from 300 K to 360 mK. Most importantly, we showed that the simple data-acquisition method, coupled with our analysis model, enabled the measurement of component parasitics, and effectively extended the accuracy of a commercial LCR meter beyond its manufacturer-guaranteed values for a wide range of measurement frequencies. We also showed that, in the current configuration, our simple approach is limited to a capacitance accuracy of ∼10 pF.

Carpenter, R. J. [Santa Clara Univ., Santa Clara, ↗

Annihilation-limited long-range exciton transport in high-mobility conjugated copolymer films

A combination of ultrafast, long-range, and low-loss excitation energy transfer from the photoreceptor location to a functionally active site is essential for cost-effective polymeric semiconductors. Delocalized electronic wavefunctions along π-conjugated polymer (CP) backbone can enable efficient intrachain transport, while interchain transport is generally thought slow and lossy due to weak chain–chain interactions. In contrast to the conventional strategy of mitigating structural disorder, amorphous layers of rigid CPs, exemplified by highly planar poly(indacenodithiophene-co-benzothiadiazole) (IDT-BT) donor-accepter copolymer, exhibit trap-free transistor performance and charge-carrier mobilities similar to amorphous silicon. Here, we report long-range exciton transport in HJ -aggregated IDTBT thin-film, in which the competing exciton transport and exciton–exciton annihilation (EEA) dynamics are spectroscopically separated using a phase-cycling-based scheme and shown to depart from the classical diffusion-limited and strong-coupling regime. In the thin film, we find an annihilation-limited mechanism with ≪100% per-encounter annihilation probability, facilitating the minimization of EEA-induced excitation losses. In contrast, excitons on isolated IDTBT chains diffuse over 350 nm with 0.56 cm 2 s −1 diffusivity, before eventually annihilating with unit probability on first contact. We complement the pump–probe studies with temperature-dependent photocurrent and EEA measurements from 295 K to 77 K and find a remarkable correspondence of annihilation rate and photocurrent activation energies in the 140 K to 295 K temperature range.

Shi, Yuping (ORCID:0000000318289415)↗

Superconducting low-beta Nb 3 Sn cavity for ATLAS and future ion accelerators

We report on a Nb 3 Sn-coated low-beta superconducting radio frequency (RF) cavity intended for accelerating ions. We aim to apply the cavity in ATLAS, our Argonne National Laboratory user facility for nuclear physics studies with ion beams in the energy range of 5–20 MeV u −1 . The Nb 3 Sn-coated cavity, a 145 MHz quarter-wave optimized for ions moving with velocity β = $v/c$ = 0.08 exhibits an order-of-magnitude reduction in RF losses into helium at 4.4 K compared to a superconducting niobium (Nb) cavity at the same frequency and temperature. Experimentally measured fields are among the highest to date for any Nb 3 Sn-coated cavity, reaching a peak surface magnetic field of 105 mT. We also present a practical solution to the problem of cavity frequency tuning. Tuning by mechanical deformation has been a challenge with Nb 3 Sn due to its brittle nature, however, using a set of techniques tailored to the properties of thin-film Nb 3 Sn on Nb, we can repeatably tune the cavity to the ATLAS master clock frequency after it is cooled, while maintaining the excellent performance characteristics. The same Nb 3 Sn cavity technology offers broad benefits for future ion accelerators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of an atomic layer deposition system for deposition of alumina as a hydrogen permeation barrier

Tritium permeation into and through materials poses a critical challenge for the development of nuclear fusion reactors. Minimizing tritium permeation is essential for the safe and efficient use of available fuel supplies. In this work, we present the design, construction, and validation of custom atomic layer deposition (ALD) and deuterium permeation measurement systems aimed at developing thin-film hydrogen permeation barriers. Using the ALD system, we deposited conformal $\mathrm{Al}_{2}\mathrm{O}_{3}$ films on copper foil substrates and characterized their growth behavior, morphology, and composition. ALD growth rates of ∼1.1 Å/cycle were achieved for temperatures between 100 ∘ C and 210 ∘ C. Permeation measurements on bare and alumina coated copper foils revealed a significant reduction in deuterium flux with the addition of a ∼10 nm $\mathrm{Al}_{2}\mathrm{O}_{3}$ layer. While bare copper followed diffusion-limited transport consistent with Sievert’s law, the alumina-coated samples exhibited surface-limited, pore-mediated transport with linear pressure dependence. Arrhenius analysis showed distinct differences in activation energy for the two transport regimes, and permeation reduction factors exceeding an order of magnitude were observed. These results demonstrate the potential of ALD-grown $\mathrm{Al}_{2}\mathrm{O}_{3}$ films as effective hydrogen isotope barriers and provide a foundation for future studies on film optimization and integration into fusion-relevant components.

atomic layer deposition↗

Experimental considerations and applications for time-resolved impedance on silicon-anode battery systems

Dynamic electrochemical impedance spectroscopy (dEIS) utilizes a superimposed multi-sinusoidal waveform and enables temporally resolved investigations on various electrochemical processes; however, the signal-to-noise ratio must be maximized while retaining linearity and stationarity within the system. In the present work, we probe the impact of the waveform’s total amplitude as well as the waveform and phase profiles. The equal amplitude multi-sinusoidal waveform with 35 mV total amplitude (<1 mV per frequency) and random phase profile exhibits the lowest impedance noise. This input signal is sufficient in avoiding the high frequency signal attenuation from the potentiostat’s low-pass filter. Additionally, we demonstrate the optimized dEIS waveform’s utility in investigating surface passivation within thin-film and composite silicon (Si) anodes. Within a two-electrode Si-lithium metal coin cell, the charge transfer resistance (RCT) associated with alloying kinetics dominates the overall impedance. RCT increases with state of charge indicating a kinetic bottleneck at higher lithiation states. To explore this further, we utilize a three-electrode Si-LiNi0.8Mn0.1Co0.1O2 pouch cell to deconvolute the Si impedance contributions. The evolution of the solid electrolyte interphase (SEI) and charge transfer resistances correlate to specific Li–Si alloy phases. We attribute this to the influence of Si particle volume expansion on SEI instabilities and a kinetic bottleneck at higher lithiation states.

Lam, Steven [ORNL]↗

How Interface Evolution at the Nanoscale Dictates Protonic Ceramic Cell Behavior

Understanding the effects of heterointerfaces in nanodevices remains a challenge in interface engineering for systems applied in solid oxide fuel cells, catalysis, sensors, and memristors [1]. Previous studies have shown that the presence of interfaces in ceramic oxide nanodevices affects their impedance properties compared to bulk systems [2]. In this work, we analyze a thin-film model system designed to study the interfaces between representative electrode and electrolyte materials employed in protonic ceramic electrochemical cells for the reversible conversion of hydrogen o electricity. The investigated device features a 21-layer architecture that alternates between an electrode material PBSCF (PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+ϵ ) and a proton-conducting electrolyte BZY (BaZr 0.8 Y 0.2 O 3-δ ), with uniform 20 nm thickness for each layer. Here, the device was fabricated using Pulsed Laser Deposition (PLD) and supported on a conductive Nb-doped STO (Nb-SrTiO 3 ) substrate.

dos Santos, Gabriel T. [Northwestern University, E↗

Compressive strain turns 𝑠 ± - into 𝑑-wave pairing in a one-unit-cell La 3 ⁢Ni 2 ⁢O 7 thin film via substrate-induced hole doping

Motivated by recent reports of ambient-pressure superconductivity in La 3 ⁢Ni 2⁢ O 7 films grown on LaSrAlO 4 , we investigate the superconducting instability in a one-unit-cell (1UC) thin film using ab initio and random-phase approximation techniques. Compared to the high-pressure bulk system, the ratio of interlayer 𝑑 3⁢𝑧 2 −𝑟 2 hopping to intralayer 𝑑 𝑥 2 −𝑦 2 hopping is suppressed in the 1UC thin film, and the crystal-field splitting of the 𝑒 𝑔 orbitals is increased. Here, our calculation indicates that spin-fluctuation-driven pairing correlations are weak for the stoichiometric case at ambient pressure, but increase significantly under hole doping. The leading pairing symmetry is also found to change by hole doping. Specifically, we obtain a leading 𝑑 𝑥 2 −𝑦 2 pairing state at moderate hole doping, followed by a 𝑑 𝑥⁢𝑦 state at higher doping. These states are driven by intraband spin-fluctuation scattering within the 𝛾 hole pocket centered around the 𝑀 point, and arise primarily from states in the Ni layer farther from the substrate. These results strongly suggest that the thin-film superconducting samples are hole-doped and that pairing in this system predominantly arises in the layer, as opposed to the interlayer pairing in the pressurized bulk system.

Zhang, Yang [Oak Ridge National Laboratory (ORNL),↗

Competing magnetic phases in Cr 3+𝛿 ⁢Te 4 are spatially segregated

Cr 1+𝑥⁢ Te 2 is a self-intercalated van der Waals system that is of current interest for its room-temperature room-temperature ferromagnetic (FM) phases and tunable topological properties. In bulk samples, the strain from the interstitial Cr ions leads to distinct structural phases for different ranges of 𝑥. Early neutron powder diffraction (NPD) measurements on the monoclinic phase Cr 3 ⁢Te 4 (𝑥=0.5) presented evidence for competing FM and antiferromagnetic (AFM) phases. Here we apply neutron diffraction to a single crystal of Cr 3+𝛿 ⁢Te 4 with 𝛿=−0.10 and discover that it consists of two distinct monoclinic phases, one with FM order below 𝑇 C ≈321 K and another that develops AFM order below 𝑇 N ≈86 K. In contrast, we find that a crystal with 𝛿=−0.26 exhibits only FM order below 𝑇 C ≈285 K. The single-crystal analysis is complemented by results obtained with NPD, x-ray powder diffraction, and transmission electron microscopy (TEM) measurements on the 𝛿=−0.10 composition. From observations of spontaneous magnetostriction of opposite sign at 𝑇 C and 𝑇 N , along with the TEM evidence for both monoclinic phases in a single thin ( ≈100 nm) grain, we conclude that the two phases must have a fine-grained ( ≲100 nm) intergrowth character, as might occur from high-temperature spinodal decomposition during the growth process. Calculations of the relaxed lattice structures for the FM and AFM phases with density functional theory provide a rationalization of the observed spontaneous magnetostrictions. Correlations between the magnitude and orientation of the magnetic moments with lattice parameter variation demonstrate that the magnetic orders are sensitive to strain, thus explaining why magnetic ordering temperatures and anisotropies can be different between bulk and thin-film samples, when the latter are subject to epitaxial strain. Our results point to the need to investigate the supposed coexistence FM and AFM phases reported elsewhere in the Cr 1+𝑥 ⁢Te 2 system, such as in the Cr 5 ⁢Te 8 phase (𝑥=0.25).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Top-Performing Photovoltaic Cells Compared to the Shockley–Queisser Limit

Top-performing single-junction and two-terminal tandem devices that include at least one polycrystalline cell are compared with each other and their ideal limits. The parameters of open-circuit voltage, short-circuit current, and fill-factor are individually compared to the Shockley–Queisser limit to investigate where different technologies have room to improve. Technologies, such as silicon and cadmium telluride have the most room for improvement in open-circuit voltage currently utilizing 87% and 81% of their maxima, respectively. Detailed diode and fill-factor loss analysis is presented for single-junction devices to give further insight on how they compare and where efficiency is lost. Single-crystal technologies demonstrate a fill-factor closer to the Shockley–Queisser limit than polycrystalline devices. The high diode quality factor of polycrystalline devices is the leading cause of the decreased fill-factor. Similar analysis on tandem cells with at least one thin-film cell shows that although their efficiency exceeds that of the single-junction cells, the fraction of their ideal efficiency is smaller. Here, by comparing parameters to the Shockley–Queisser limit, it becomes clearer where certain technologies have the potential for improvement.

High efficiency↗