Search NASA⌕ Search

SEARCH · Search NASA

Results for “titanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

TiO 2 Nanoparticles Enabling Photocatalytic Desulfurization for C–C Coupling Reaction Using Visible Light

We uncover a surface-mediated mechanism for visible-light-driven photocatalytic desulfurization of thiols on titanium dioxide (TiO 2 ) nanoparticles under LED illumination (>420 nm). Combined diffuse reflectance, infrared, and cryogenic electron paramagnetic resonance spectroscopy verify the formation of a surface thiol–Ti charge-transfer complex that introduces visible-light absorption into an otherwise UV-active reaction system. Selective photoexcitation of this surface complex drives interfacial charge transfer, directly activating the adsorbed thiol and inducing C–S bond scission without the band gap excitation of TiO 2 . The resulting carbon-centered radical intermediates are intercepted by styrene to form C–C coupling products. These results uncover a distinct surface-mediated photocatalytic mechanism in which charge-transfer complex formation governs both light absorption and chemical activation, providing a mechanistic framework for extending visible-light reactivity to wide-bandgap metal oxide photocatalysts.

addition of carbon radical to vinyl groups↗
DOE OSTI2025

Commodity Thermoplastic Elastomer-Enabled Templated Synthesis of Large-Pore Ordered Mesoporous Materials

Fabrication of ordered mesoporous materials (OMMs) has predominantly relied on templating-based methods. However, these methods are constrained by several limitations, especially the limited pore sizes attainable with commercially available surfactants used as structure-directing agents. To unlock the full potential of the OMMs, it is essential to develop synthetic strategies that facilitate the production of large-pore OMMs using scalable processes and cost-effective precursors. This work demonstrates the use of thermoplastic elastomer (TPE)-derived carbon replicas for synthesizing ordered mesoporous silica (OMS) and metal oxides (OMMOs) via precursor infiltration and template removal. The nanostructural evolution of the resulting inorganic materials was systematically investigated. Specifically, using tetraethyl orthosilicate (TEOS) as a silica precursor, this method can produce an OMS with relatively large pores. To establish the generalizability of this process, the fabrication approach was extended to other commercially available TPEs with varied chemical compositions and molecular weights while consistently resulting in ordered structures. Additionally, this synthetic strategy can be successfully applied to the production of OMMOs, including tin and titanium oxide matrix chemistries, yielding pore sizes of 16.0 and 19.2 nm, respectively. By developing a general method and using low-cost precursors, this work presents a scalable approach for fabricating large-pore OMMs with tunable pore textures and matrix chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Engineering Escherichia coli for Urease-Driven Synthesis of Metal Oxide Nanomaterials

The development of functional nanomaterials with controlled morphologies is essential for advancements in medicine, electronics and computing, energy, catalysis, and environmental applications. However, conventional synthesis methods often demand high energy input and pose significant environmental challenges. Urease-based biomineralization presents an efficient, eco-friendly alternative for nanomaterial production under mild conditions. In this study, we engineered Escherichia coli ( E. coli ) to express a urease gene cluster from Sporosarcina pasteurii using CRAGE-Duet technology. The engineered strain successfully synthesized calcium carbonate and calcium phosphate crystals. Expanding the approach, we synthesized metal oxide nanoparticles, including hematite (Fe 2 O 3 ), and nanocrystalline anatase titanium dioxide (TiO 2 ). These nanomaterials were characterized by electron microscopy, demonstrating the potential of E. coli as a sustainable and versatile platform for green nanomaterial synthesis.

bacteria↗
DOE OSTI2024

Electrochemically Determined and Structurally Justified Thermochemistry of H atom Transfer on Ti-Oxo Nodes of the Colloidal Metal–Organic Framework Ti-MIL-125

Titanium dioxide (TiO 2 ) has long been employed as (photo)electrodes for reactions relevant to energy storage and renewable energy synthesis. Proton-coupled electron transfer (PCET) reactions with equimolar amounts of protons and electrons at the TiO 2 surface or within the bulk structure lie at the center of these reactions. Because a proton and an electron are thermochemically equivalent to an H-atom, these reactions are essentially H-atom transfer reactions. Thermodynamics of H-atom transfer has a complex dependence on the synthetic protocol and chemical history of the electrode, the reaction medium, and many others; together, these complications preclude the understanding of the H-atom transfer thermochemistry with atomic-level structural knowledge. Herein, we report our success in employing open-circuit potential (E OCP ) measurements to quantitatively determine the H-atom transfer thermochemistry at structurally well-defined Ti-oxo clusters within a colloidally stabilized metal–organic framework (MOFs), Ti-MIL-125. The free energy to transfer H-atom, Ti 3+ O–H bond dissociation free energy (BDFE), was measured to be 68(2) kcal mol -1 . To the best of our understanding, this is the first report on using E OCP measurements to quantify thermochemistry on any MOFs. The proton topology, the structural change upon the redox reaction, and BDFE values were further quantitatively corroborated using computational simulations. Furthermore, comparisons of the E OCP -derived BDFEs of Ti-MIL-125 to similar parameters in the literature suggest that E OCP should be the preferred method for quantitatively accurate BDFE calculations. Here, the reported success in employing E OCP for nanosized Ti- MIL-125 should lay the ground for thermochemical measurements of other colloidal systems, which are otherwise challenging. Implications of these measurements on Ti-MIL-125 as an H-atom acceptor in chemical reactions and comparisons with other MOFs/metal oxides are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Remote-Contact Catalysis for Target-Diameter Semiconducting Carbon Nanotube Arrays

Electrostatic catalysis has been an exciting development in chemical synthesis (beyond enzymes catalysis1 ) in recent years, boosting reaction rates and selectively producing certain reaction products2 . Most of the studies to date have been focused on using external electric field (EEF) to rearrange the charge distribution in small molecule reactions such as Diels-Alder addition3 , carbene reaction4 , etc. However, in order for these EEFs to be effective, a field on the order of 1 V/nm (10 MV/cm) is required, and the direction of the EEF has to be aligned with the reaction axis5 . Such a large and oriented EEF will be challenging for large-scale implementation, or materials growth with multiple reaction axis or steps. Here, we demonstrate that the energy band at the tip of an individual single-walled carbon nanotube6 (SWCNT) can be spontaneously shifted in a high-permittivity growth environment, with its other end in contact with a low-work function electrode (e.g., hafnium carbide or titanium carbide7 ). By adjusting the Fermi level at a point where there is a substantial disparity in the density of states (DOS) between semiconducting (s-) and metallic (m-) SWCNTs8 , we achieve effective electrostatic catalysis for s-SWCNT growth assisted by a weak EEF perturbation (200V/cm). This approach enables the production of high-purity (99.92%) s-SWCNT horizontal arrays with narrow diameter distribution (0.95±0.04 nm), targeting the requirement of advanced SWCNT-based electronics for future computing9-11. These findings highlight the potential of electrostatic catalysis in precise materials growth, especially for s-SWCNTs, and pave the way for the development of advanced SWCNT-based electronics12.

Wang, Jiangtao↗
DOE OSTI2025

Defect-Driven Redox Interplay on Anatase TiO 2 : Surface-Structure Dependent Activation for CO 2 Hydrogenation Catalysis

Titanium dioxide (TiO 2 ) is one of the most extensively studied oxides as an active catalyst or catalyst support, particularly in energy and environmental applications, but the atomistic mechanisms governing its dynamic response to reactive environments and their correlation to reactivity remain largely elusive. Using in situ environmental transmission electron microscopy (ETEM), synchrotron X-ray diffraction (XRD), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), temperature-programmed reduction (TPR), reactivity measurements, and theoretical modeling, we reveal the dynamic interplay between oxygen loss and replenishment of anatase TiO 2 under varying reactive conditions. Under H 2 exposure, anatase TiO 2 undergoes surface reduction via lattice oxygen loss, forming Ti 3 O 5 . In contrast, CO 2 exposure induces oxygen replenishment, reversing stoichiometry. In mixed H2/CO 2 environments, the reverse water–gas shift (RWGS) reaction proceeds selectively on stepped and high-indexed TiO 2 surfaces, whereas the thermodynamically stable TiO 2 (101) surface remains inactive and intact. Critically, H 2 pretreatment generates oxygen vacancies on TiO 2 (101), transforming it into an active Ti 3 O 5 or defect-rich surface that catalyzes RWGS. By correlating surface structure, defect dynamics, and gas-phase interactions, this work deciphers the competition between H 2 -driven reduction and CO 2 -driven oxidation pathways at the atomic scale. Furthermore, these insights establish defect engineering as a strategic lever to activate inert TiO 2 facets, advancing the design of adaptive catalysts for sustainable fuel synthesis technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrochemical Synthesis of Zeolite Coatings with Controlled Crystal Polymorphism and Self-Regulating Growth

Zeolite coatings are studied as molecular sieves for membrane separation, membrane reactors, and chemical sensor applications. They are also studied as anticorrosive films for metals and alloys, antimicrobial and hydrophobic films for heating, ventilation, and air conditioning, and dielectrics for semiconductor applications. Zeolite coatings are synthesized by hydrothermal, ionothermal, and dry-gel conversion approaches, which require high process temperatures and lengthy times (ranging from hours to days). Here, we report the first zeolite coatings synthesized via electrochemical deposition on a cathodic electrode, with controlled crystal polymorphism achieved within subhourly duration. We demonstrate this approach by developing sodium zeolite (e.g., sodalite (SOD), NaA (LTA), and Linde Type N (LTN)) coatings on a titanium electrode and extending the synthesis method to porous stainless steel. The coating morphology and crystallinity depend on the temperature, time, and applied current. The coating thickness is independent of the applied current, showing the presence of a self-regulating mechanism to ensure a uniform coating thickness across the metal surface. The electrochemical zeolite growth mechanism was elucidated with high-resolution transmission electron microscopy, and applications of the resultant zeolite coatings for oil/water separation and ethanol/water pervaporation were exploited. Electrochemical synthesis represents a novel, simple, fast, and environmentally friendly approach to preparing zeolite coatings. It can potentially be generalized for developing zeolite materials with diverse framework structures, morphologies, and orientations for substrates with complicated geometries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Self-aligned heterogeneous quantum photonic integration

Integrated quantum photonics holds significant promise for scalable photonic quantum information processing, quantum repeaters, and quantum networks, but its development is hindered by the mismatch between materials hosting high-quality quantum emitters and those compatible with mature photonic technologies. Heterogeneous integration offers a potential solution to this challenge, yet practical implementations have been limited by inevitable insertion losses at material interfaces. Here, we present a self-aligned heterogeneous quantum photonic integration approach that enables near-unity coupling efficiency at the interface. To showcase our approach, we demonstrate Purcell enhancement of a silicon vacancy (SiV) center in diamond induced by a heterogeneous photonic crystal cavity defined by titanium dioxide (TiO 2 ), as well as optical spin control and readout via a TiO 2 photonic circuit. We further show that, when combined with inverse photonic design, our approach enables efficient and broadband collection of single photons from a color center into a heterogeneous waveguide. Our approach is not restricted to SiV centers or TiO 2 ; it has the potential to be broadly applied to integrate diverse solid-state quantum emitters with thin-film photonic devices where conformal deposition is possible. Together, these results establish a practical route to scalable quantum photonic integrated circuits that combine high-quality quantum emitters with technologically mature photonic platforms.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mitigating CaCO 3 crystal nucleation and growth through continuous ion displacement via alternating electric fields

Mineral crystal formation poses a challenge on surfaces (e.g., heat exchangers, pipes, membranes, etc.) in contact with super-saturated fluids. Applying alternating currents (AC) to such surfaces can prevent surface crystallization under certain conditions. Here, we demonstrate that ion displacement induced by periodic charging and discharging of the electrical double layer (EDL) inhibits both heterogeneous and homogeneous nucleation (and crystal growth) of CaCO 3 . Titanium sheets (meant to simulate metallic heat exchanger surfaces) are immersed in super-saturated CaCO 3 solutions with a saturation index >11. We show that at relatively high AC frequencies, incomplete EDL formation leads to an alternating electric field that propagates far into the bulk solution, inducing rapid ion migration that overwhelms the Brownian motion of ions. Electrochemical characterization reveals EDL charging/discharging under AC conditions that greatly inhibits precipitation. Operating at 4 V pp , 0.1–10 Hz reduces turbidity by over 96% and reduces CaCO 3 coverage on the metal plates by over 92%. Based on electrokinetic and crystallization models, the ion displacement velocity (exceeding the mean Brownian velocity) and displacement length disrupts ion collision and crystal nucleation. Overall, the technique has potential for preventing mineral crystal formation in heat exchangers and many other industrially relevant systems.

42 ENGINEERING↗
DOE OSTI2025

Gapless dispersive continuum in a modulated quantum kagome antiferromagnet

The pursuit of quantum spin liquid (QSL) states in condensed matter physics has drawn attention to kagome antiferromagnets (AFM) where a two-dimensional corner-sharing network of triangles frustrates conventional magnetic orders. While quantum kagome AFMs based on Cu 2+ (3d 9 , s = 1/2) ions have been extensively studied, there is so far little work beyond copper-based systems. Here we present our bulk magnetization, specific heat and neutron scattering studies on single crystals of a new titanium fluorides Cs 8 RbK 3 Ti 12 F 48 where Ti 3+ (3d 1 , s = 1/2) ions form a modulated quantum kagome antiferromagnet that does not order magnetically down to 1.5 K. Our comprehensive map of the dynamic response function $S$($Q$,$\hslash$$\omega$) acquired at 1.5 K where the heat capacity is T-linear reveals a dispersive continuum emanating from soft lines that extend along (100). The data indicate fractionalized spinon-like excitations with quasi-one-dimensional dispersion within a quasi-two-dimensional spin system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Integrated millimeter-wave cavity electro-optic transduction

Emerging communications and computing technologies will rely ever-more on expanding the useful radio frequency spectrum into the millimeter-wave and terahertz frequency range. Both classical and quantum applications would benefit from advancing integration and incorporation of millimeter-wave and electro-optic technologies into common devices, such as modulators. Here we demonstrate an integrated triply-resonant, superconducting electro-optic transducer. Our design incorporates an on-chip 107 GHz niobium titanium nitride superconducting resonator, modulating a thin-film lithium niobate optical racetrack resonator operating at telecom wavelengths. We observe a maximum photon transduction efficiency of η OE ≈ 0.82 × 10 −6 and an average single-photon electro-optic interaction rate of g 0 /2π ≈ 0.7 kHz. We also present a study and analysis of the challenges associated with the design of integrated millimeter-wave resonators and propose possible solutions to these challenges. Our work paves the way for further advancements in resonant electro-optic technologies operating at millimeter-wave frequencies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Impact of nitrogen on lithium-induced corrosion and cracking of RAFM steel

The emergence of private fusion enterprises, combined with advancements in U.S. and EU ITER-TBM as well as EU DEMO liquid breeder blanket concepts, has renewed focus on the materials challenges. This study examines the compatibility of reduced activation ferritic/martensitic (RAFM) steel in liquid Lithium (Li) containing various Nitrogen (N) concentrations, tested at 600 and 700 °C for 500 and 1000 h under static conditions. Microstructural characterization revealed the corrosion-induced dissolution and precipitation in Li containing 0.082 and 0.17 wt.% N at 600 °C, while limited dissolution and precipitation were observed in N-gettered Li using zirconium (Zr) and titanium (Ti) foils at 600 °C. Tensile testing at room temperature after Li exposure revealed a decrease in strength and ductility of the RAFM steel as a function of N content in Li. Severe embrittlement was observed after 500 h in Li containing 0.17 wt.% N at 600 °C and after 500 h in hot-gettered Li at 700 °C. Chromium (Cr) depletion from the steel matrix was observed, leading to the formation of M6C-type carbides on the surface identified by electron microscopy (SEM), X-ray diffraction (XRD), in agreement with thermodynamic calculations. These findings highlight the critical materials challenges posed by liquid Li breeder blanket concepts, emphasizing the need for improved strategies to address Li-induced dissolution, precipitation, and steel embrittlement due to N contamination of the coolant.

Romedenne, Marie [ORNL] (ORCID:0000000317936561)↗
DOE OSTI2024

Metals strengthen with increasing temperature at extreme strain rates

The strength of materials depends on the rate at which they are tested, as defects, for example dislocations, that move in response to applied strains have intrinsic kinetic limitations. As the deformation strain rate increases, more strengthening mechanisms become active and increase the strength. However, the regime in which this transition happens has been difficult to access with traditional micromechanical strength measurements. Here, with microballistic impact testing at strain rates greater than 10 6 s −1 , and without shock conflation, we show that the strength of copper increases by about 30% for a 157 °C increase in temperature, an effect also observed in pure titanium and gold. This effect is counterintuitive, as almost all materials soften when heated under normal conditions. This anomalous thermal strengthening across several pure metals is the result of a change in the controlling deformation mechanism from thermally activated strengthening to ballistic transport of dislocations, which experience drag through phonon interactions. These results point to a pathway to better model and predict materials properties under various extreme strain rate conditions, from high-speed manufacturing operations to hypersonic transport.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Imaging and speciation of intracellular metallic implant debris using synchrotron-based X-ray fluorescence micro-spectroscopy: a study of two cases

Debris generated from total hip arthroplasty (THA) components made from metal alloys can cause, in some cases, inflammatory cell (e.g., macrophages) responses that lead to adverse local tissue reactions (ALTR) and implant failure. The lack of information on intracellular chemical alterations of metal debris has hindered the understanding of the pathogenesis of ALTR. The goal of this study was to characterize intracellular debris within macrophages using Synchrotron imaging and spectroscopy. We studied periprosthetic tissues of two retrieved THAs with (1) a metal-on-metal (MoM) articulation and (2) a metal-on-polyethylene (MoP) articulation exhibiting corrosion of the metal femoral head. The MoM-THA exhibited different valence states of chromium- and cobalt-containing debris, suggesting three different moieties: Cr 2 O 3 , CrPO 4 , and an alloy-oxide mixture. The findings further suggest that Cr 2 O 3 formed in the tribological interfaces of the implant, while CrPO 4 is a by-product of the phagocytosis process of cobalt alloy-containing debris. Titanium debris appeared to occur in a mixed crystalline/amorphous oxide state. It remains unclear if this chemical state results from the tribochemical processes at the implant surface or intracellular alterations. The MoP-THA specimen exhibited no intracellular particulate debris associated with macrohpages, indicating that the ALTR may be entirely triggered by metal ionic species in this case. A better understanding of in vivo chemical alteration of implant debris will aid in assessing the risk for ALTR during implant design and material choice. However, various techniques are needed to accurately determine the interaction between metal particles and the inta- and extra-cellular environment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Alteration history of aluminum-rich rocks at Jezero crater, Mars

Aluminum-rich clay minerals are detected across the ancient surface of Mars and record intervals of intense alteration by liquid water. On Earth, these clay minerals can form from hydrothermal alteration or rainfall-driven chemical weathering over thousands to millions of years, but how they formed on Mars remains a mystery. The Perseverance rover discovered light-toned, cobble-sized, aluminum-rich (30-45 wt% Al 2 O 3 ) “float” rocks (rock fragments), with some exhibiting spectral signatures of kaolinite, an aluminum-rich clay mineral. These rocks now enable an investigation into the ancient kaolinite-bearing terrains of Mars. To interpret their formation, we use data from the SuperCam and Mastcam-Z instruments onboard the rover to compare the chemistry and reflectance spectra of the float rocks with deeply weathered paleosols and hydrothermal kaolin deposits from Earth’s geological record. Aluminum and titanium enrichments coupled with depletion of iron and magnesium are unlike hydrothermal deposits and instead comparable to bleached horizons of paleosols that formed under high rainfall during past greenhouse climates on Earth. These rocks therefore likely represent some of the wettest intervals of Mars’ history.

58 GEOSCIENCES↗
DOE OSTI2025

Unraveling spin entanglement using quantum gates with scanning tunneling microscopy-driven electron spin resonance

Quantum entanglement is a fundamental resource for quantum information processing, and its controlled generation and detection remain key challenges in scalable quantum architectures. Here, we numerically demonstrate the deterministic generation of entangled spin states in a solid-state platform by implementing quantum gates via electron spin resonance combined with scanning tunneling microscopy (ESR-STM). Using two titanium atoms on a MgO/Ag(100) substrate as a model, we construct a two-qubit system whose dynamics are coherently manipulated through tailored microwave pulse sequences. We generate Bell states by implementing a Hadamard gate followed by a controlled-NOT gate, and evaluate its fidelity and concurrence using the quantum-master equation-based code TimeESR. Our results demonstrate that ESR-STM can create entangled states with significant fidelity. This study paves the way for the realization of atom-based quantum circuits and highlights ESR-STM as a powerful tool for probing and engineering entangled states on surfaces.

Switzer, Eric D. [Donostia International Physics C↗
DOE OSTI2025

Cobalt promotion of the InO x –TiO 2 heterojunction for dual photothermal reduction of CO 2

A series of cobalt-promoted indium–titanium composite oxides was synthesized using a microemulsion method. Their functional properties were investigated for the photothermal reduction of carbon dioxide. In this series, the indium content varied between 2.5 and 20%, while the cobalt percentage was kept constant at 4% throughout the series. In all cases, carbon monoxide formation occurred selectively through the reverse water gas shift reaction. The sample with 2.5% In maximized the synergistic use of the two energy sources, while the sample with 10% In showed the highest catalytic activity under both thermal and dual photo-thermo conditions. A physicochemical characterization was performed for all samples. The use of microscopy and X-ray absorption spectroscopy demonstrated that sub-nanometric indium entities, in combination with atomically dispersed cobalt oxide entities, achieved a balance between high thermal activity and significant synergy between light and heat in a catalytic process. The system with 10% indium is thus able to improve the thermal catalytic process through the use of light, providing an intensification procedure for the classic process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗