SEARCH · Search NASA

Results for “turbulence intensity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS2017

Increased Jet Noise Due to a "Nominally Laminar" State of Nozzle Exit Boundary Layer

A set of 2-inch diameter nozzles is used to investigate the effect of varying exit boundary layer state on the radiated noise from high-subsonic jets. It is confirmed that nozzles involving turbulent boundary layers are the quietest while nozzles involving a nominally-laminar boundary layer are loud especially on the high-frequency side of the sound pressure level spectrum. The latter boundary layer state involves a Blasius-like mean velocity profile but higher turbulence intensities compared to those in the turbulent state. The higher turbulence in the initial region of the jet shear layer leads to increased high-frequency noise. The results strongly suggest that an anomaly noted with subsonic jet noise databases in the literature is due to a similar effect of differences in the initial boundary layer state.

Zaman, K. B. M. Q.↗

NASA NTRS1977

Effectiveness of an inlet flow turbulence control device to simulate flight noise fan in an anechoic chamber

A hemispherical inlet flow control device was tested on a 50.8 cm. (20-inch) diameter fan stage in the NASA-Lewis anechoic chamber. The control device used honeycomb and wire mesh to reduce turbulence intensities entering the fan. Far field acoustic power level results show about a 5 db reduction in blade passing tone and about 10 dB reduction in multiple pure tone sound power at 90% design fan speed with the inlet device in place. Hot film cross probes were inserted in the inlet to obtain data for two components of the turbulence at 65 and 90% design fan speed. Without the flow control device, the axial intensities were below 1.0%, while the circumferential intensities were almost twice this value. The inflow control device significantly reduced the circumferential turbulence intensities and also reduced the axial length scale.

Woodward, R. P.↗

NASA NTRS1977

Effectiveness of an inlet flow turbulence control device to simulate flight fan noise in an anechoic chamber

A hemispherical inlet flow control device was tested on a 50.8 cm. (20-inch) diameter fan stage in the NASA-Lewis Anechoic Chamber. The control device used honeycomb and wire mesh to reduce turbulence intensities entering the fan. Far field acoustic power level results showed about a 5 dB reduction in blade passing tone and about 10 dB reduction in multiple pure tone sound power at 90% design fan speed with the inlet device in place. Hot film cross probes were inserted in the inlet to obtain data for two components of the turbulence at 65 and 90% design fan speed. Without the flow control device the axial intensities were below 1.0%, while the circumferential intensities were almost twice this value. The inflow control device significantly reduced the circumferential turbulence intensities and also reduced the axial length scale.

Woodward, R. P.↗

NASA NTRS1975

Propulsive effects due to flight through turbulence

A simple and straightforward analysis is presented for evaluating the approximate magnitude of the propulsive effect for various types of airplane (soaring glider, light airplane, fighter, and transport). The airplane, subject to vertical gust disturbances, is assumed to be constrained to fly at constant airspeed and constant pitch angle. Changes in the magnitude and direction of the lift vector are taken into account. It is shown that the thrust effects due to turbulence vary as the square of the turbulence intensity and are quite small for moderate turbulence. Only for rather severe turbulence are the effects large enough to be given any consideration. The thrust coefficient is 10-20% of the drag coefficient of a soaring glider.

Phillips, W. H.↗

NASA NTRS1981

Energy efficient engine, low-pressure turbine boundary layer program

A study was conducted to investigate development of boundary layers under the influence of velocity distributions simulating the suction side of two state-of-the-art turbine airfoils: a forward loaded airfoil (squared-off design) and an aft loaded airfoil (aft-loaded design). These velocity distributions were simulated in a boundary layer wind tunnel. Detailed measurements of boundary layer mean velocity and turbulence intensity profiles were obtained for an inlet turbulence level of 2.4 percent and an exit Reynolds number of 800,000. Flush-mounted hot film probes identified the boundary layer transition regimes in the adverse pressure gradient regions for both velocity distributions. Wall intermittency data showed good agreement with the correlations of Dhawan and Narasimha for the intermittency factor distribution in transitional flow regimes.

Gardner, W. B.↗

NASA NTRS1982

The Analysis of Turbulent Flow by Hot Wire Signals

When measuring velocities in turbulent gas flow, approximation signal analysis with hot wire anemometers having one and two wire probes are used. A numeric test of standard analyses shows the resulting systemmatic error increases quickly with increasing turbulent intensity. Since it also depends on the turbulence structure, it cannot be corrected. The use of such probes is thus restricted to low turbulence. By means of three wire probes (in two dimensional flows with X wire probes) in principle, instantaneous values of velocity can be determined, and an asymmetric arrangement of wires has a theoretical advantage.

Bartenwerfer, M.↗

NASA NTRS1986

Influence of bulk turbulence and entrance boundary layer thickness on the curved duct flow field

The objective of this investigation was the experimental evaluation of bulk turbulence and boundary thickness influence on the secondary flow development in a square, 90 deg turning duct. A three dimensional laser velocimetry system was utilized to measure the mean and fluctuating components of velocity in the large curved duct facility. The three dimensional development of the viscous shear layers in the curved duct has a strong influence on the complete flow field. Since ducted three dimensional flows are found in many engineering applications, including gas turbine engines, and contain high turbulence levels and high wall heat transfer rates, they present a difficult challenge to computational fluid mechanics codes. Turbulence modeling remains one of constraints to CFD advance due to inadequate physical understanding and experimental definition of turbulent shear flows. The results of this investigation expand the curved duct data base to higher turbulence levels and thicker entrance boundary layers. The experimental results provide a challenging benchmark data base for computational fluid dynamics code development and validation. The variation of inlet bulk turbulence intensity provides additional information to aid in turbulence model evaluation.

Crawford, Roger A.↗

NASA NTRS1990

Influence of bulk turbulence and entrance boundary layer thickness on the curved duct flow field

Shohadaee, Ahmad A.↗

NASA NTRS1995

Turbulance boundary conditions for shear flow analysis, using the DTNS flow solver

The effects of different turbulence boundary conditions were examined for two classical flows: a turbulent plane free shear layer and a flat plate turbulent boundary layer with zero pressure gradient. The flow solver used was DTNS, an incompressible Reynolds averaged Navier-Stokes solver with k-epsilon turbulence modeling, developed at the U.S. Navy David Taylor Research Center. Six different combinations of turbulence boundary conditions at the inflow boundary were investigated: In case 1, 'exact' k and epsilon profiles were used; in case 2, the 'exact' k profile was used, and epsilon was extrapolated upstream; in case 3, both k and epsilon were extrapolated; in case 4, the turbulence intensity (I) was 1 percent, and the turbulent viscosity (mu(sub t)) was equal to the laminar viscosity; in case 5, the 'exact' k profile was used and mu(sub t) was equal to the laminar viscosity; in case 6, the I was 1 percent, and epsilon was extrapolated. Comparisons were made with experimental data, direct numerical simulation results, or theoretical predictions as applicable. Results obtained with DTNS showed that turbulence boundary conditions can have significant impacts on the solutions, especially for the free shear layer.

Mizukami, M.↗

NASA NTRS1985

Feasibility of Mapping Velocity Flow Fields in SSME Powerhead by Laser Anemometry Techniques

Because of the flow environment associated with the SSME powerhead pressure (3000 psia), temperature (1800 R), and mechanical complexity and the high vibration test stand environment, detailed flow measurements are difficult to make. The feasibility of using laser anemometry techniques to map velocity flow fields in an SSME powerhead is studied. In the study three engine powerhead component flow environments: (1) the high pressure fuel turbopump preburner, (2) the fuel turbopump turbine rotor and stator region, and (3) the 180 deg turnaround duct - are being considered. Flow parameters measured by the anemometry techniques are time averaged values of the velocity magnitude and flow direction, turbulence intensity, velocity component correlation, integral time scale, and turbulence spectrum.

Pelaccio, D. G.↗

NASA NTRS1988

Turbulence management in free shear flows by control of coherent structures

The possibility of controlling turbulence by manipulating coherent structures is discussed. The processes of the generation, evolution, and interaction of coherent structures are described together with measurements necessary to analyze such coherent-structure properties as coherent vorticity, incoherent turbulence intensities, coherent and incoherent Reynolds stresses, and coherent turbulence production. Experimental findings are presented, in which the modified coherent structures were shown to result in favorable effects on the turbulence field.

Husain, Hyder S.↗

NASA NTRS1984

Interactive computer modeling of combustion chemistry and coalescence-dispersion modeling of turbulent combustion

An interactive computer code for simulation of a high-intensity turbulent combustor as a single point inhomogeneous stirred reactor was developed from an existing batch processing computer code CDPSR. The interactive CDPSR code was used as a guide for interpretation and direction of DOE-sponsored companion experiments utilizing Xenon tracer with optical laser diagnostic techniques to experimentally determine the appropriate mixing frequency, and for validation of CDPSR as a mixing-chemistry model for a laboratory jet-stirred reactor. The coalescence-dispersion model for finite rate mixing was incorporated into an existing interactive code AVCO-MARK I, to enable simulation of a combustor as a modular array of stirred flow and plug flow elements, each having a prescribed finite mixing frequency, or axial distribution of mixing frequency, as appropriate. Further increase the speed and reliability of the batch kinetics integrator code CREKID was increased by rewriting in vectorized form for execution on a vector or parallel processor, and by incorporating numerical techniques which enhance execution speed by permitting specification of a very low accuracy tolerance.

Pratt, D. T.↗

NASA NTRS1972

A case study of persistent, intense, clear air turbulence in an upper level frontal zone.

Widespread and persistent clear air turbulence (CAT) occurred over the Eastern Seaboard of the U.S. between New York and South Carolina on 18 March 1969. The major synoptic features and a qualitative discussion of the factors contributing to the development of the large vertical wind shears associated with the turbulence are presented. The turbulent region in the vicinity of Wallops Island, Va., was probed with a NASA T-33 research aircraft and with sensitive radars. The clear air radar echoes and the most intense turbulence occurred principally within an upper level frontal zone of about 2 km depth which was produced by the confluence of two currents of widely different origin.

Reed, R. J.↗

NASA NTRS1978

Acoustic scattering from locally homogeneous turbulence

An equation is derived for acoustic scattering from the velocity and temperature fields of a drifting blob of air turbulence. The equation is solved for scattering from the mean and turbulent portions of both fields, and the time autocorrelation and power spectral density of the received signal are calculated. The mean velocity and temperature fields, as well as the corresponding turbulence intensity distributions, are allowed to be spatially nonuniform. The turbulent fields are required to be only locally homogeneous and locally stationary. It is shown that the common practice of representing antenna patterns by either truncating the flow or tapering the strength of the flow is, at least in the case of the transmitting pattern, not a bad approximation. Spectral broadening of the receiver signal due to convection of the small scattering eddies by macroeddies and by the mean flow in modeled, and the broadening by macroeddy convection is seen to render negligible the broadening which arises from the drift of the target flow through the antenna beam. The analysis reveals that only for target flows having a high degree of spatial uniformity and/or symmetry does the received positive-frequency power spectral density turn out to be symmetrical about a center frequency.

Ramsey, V. W.↗

NASA NTRS1990

Navier-Stokes analysis of turbine blade heat transfer

Comparisons with experimental heat transfer and surface pressures were made for seven turbine vane and blade geometries using a quasi-three-dimensional thin-layer Navier-Stokes analysis. Comparisons are made for cases with both separated and unseparated flow over a range of Reynolds numbers and freestream turbulence intensities. The analysis used a modified Baldwin-Lomax turbulent eddy viscosity mode. Modifications were made to account for the effects of: (1) freestream turbulence on both transition and leading edge heat transfer; (2) strong favorable pressure gradients on relaminarization; and (3) variable turbulent Prandtl number heat transfer. In addition, the effect of heat transfer on the near wall model of Deissler is compared with the Van Driest model.

Boyle, R. J.↗

NASA NTRS1990

Navier-Stokes analysis of turbine blade heat transfer

Boyle, R. J.↗

NASA NTRS1992

Increased heat transfer to elliptical leading edges due to spanwise variations in the freestream momentum: Numerical and experimental results

A study of the effect of spanwise variation in momentum on leading edge heat transfer is discussed. Numerical and experimental results are presented for both a circular leading edge and a 3:1 elliptical leading edge. Reynolds numbers in the range of 10,000 to 240,000 based on leading edge diameter are investigated. The surface of the body is held at a constant uniform temperature. Numerical and experimental results with and without spanwise variations are presented. Direct comparison of the two-dimensional results, that is, with no spanwise variations, to the analytical results of Frossling is very good. The numerical calculation, which uses the PARC3D code, solves the three-dimensional Navier-Stokes equations, assuming steady laminar flow on the leading edge region. Experimentally, increases in the spanwise-averaged heat transfer coefficient as high as 50 percent above the two-dimensional value were observed. Numerically, the heat transfer coefficient was seen to increase by as much as 25 percent. In general, under the same flow conditions, the circular leading edge produced a higher heat transfer rate than the elliptical leading edge. As a percentage of the respective two-dimensional values, the circular and elliptical leading edges showed similar sensitivity to span wise variations in momentum. By equating the root mean square of the amplitude of the spanwise variation in momentum to the turbulence intensity, a qualitative comparison between the present work and turbulent results was possible. It is shown that increases in leading edge heat transfer due to spanwise variations in freestream momentum are comparable to those due to freestream turbulence.

Rigby, D. L.↗

NASA NTRS1989

Some characteristics of bypass transition in a heated boundary layer

Experimental measurements of both mean and conditionally sampled characteristics of laminar, transitional and low Reynolds number turbulent boundary layers on a heated flat plate are presented. Measurements were obtained in air over a range of freestream turbulence intensities from 0.3 percent to 6 percent with a freestream velocity of 30.5 m/s and zero pressure gradient. Conditional sampling performed in the transitional boundary layers indicate the existence of a near-wall drop in intermittency, especially pronounced at low intermittencies. Nonturbulent intervals were observed to possess large levels of low-frequency unsteadiness, and turbulent intervals had peak intensities as much as 50 percent higher than were measured at fully turbulent stations. Heat transfer results were consistent with results of previous researchers and Reynolds analogy factors were found to be well predicted by laminar and turbulent correlations which accounted for unheated starting length. A small dependence of the turbulent Reynolds analogy factors on freestream turbulence level was observed. Laminar boundary layer spectra indicated selective amplification of unstable frequencies. These instabilities appear to play a dominant role in the transition process only for the lowest freestream turbulence level studied, however.

Sohn, K. H.↗